Hey all,
I recently got a set up to get my HDD contected to my note. (with y cable for power suply) However when i plug it in it just says usb connecter connected and after a few seconds it tells me that mass storage is savely removed? this happens while the cable is still plugged in and im just waiting without touching any cable etc. Any idea what could cause this problem?
Silence93 said:
Hey all,
I recently got a set up to get my HDD contected to my note. (with y cable for power suply) However when i plug it in it just says usb connecter connected and after a few seconds it tells me that mass storage is savely removed? this happens while the cable is still plugged in and im just waiting without touching any cable etc. Any idea what could cause this problem?
Click to expand...
Click to collapse
I had read about this somewhere. Cant remember.
I think its an issue with the driver. Just to confirm try another PC.
Or else the usb port or cable is screwed.
Hey thanks for responding . A pc isn't the problem. I'm currently one step further which is that the note 10.1 does see that a usb device is connected but doesn't recognize it as a mass storage device. Any ideas what could solve this?
Silence93 said:
Hey thanks for responding . A pc isn't the problem. I'm currently one step further which is that the note 10.1 does see that a usb device is connected but doesn't recognize it as a mass storage device. Any ideas what could solve this?
Click to expand...
Click to collapse
Ums does not work with stock roms
Sent from my GT-N8013 using Tapatalk 2
I'm not using a stock rom though...
I'm not on stock and I had to use a USB OTG app to mount my drive. I used USB OTG Helper but there are others out there that work too.
Will try that but in case it doesn't, what rom are you using?
Thanks again
Android revolution HD.
Sent from my MB855 using Tapatalk 2
Same here bro.. using revolution HD.. usb not recognized.. in the device manager detected with unknown device..
Sent from my GT-N8000 using xda app-developers app
I'm not sure if my drive is NTFS or exFAT, that might make a difference. I'm also using a powered USB hub but have been able to mount the drives using the USB OTG helper app that I mentioned. USB seems flaky to me tough... sometimes it works without a hitch, sometimes I have to mess around to get things to connect properly.
Sent from my GT-N8013 using Tapatalk HD
adyet26 said:
Same here bro.. using revolution HD.. usb not recognized.. in the device manager detected with unknown device..
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
I was connecting fine over USB before installing AR and now it reboots the tablet whenever connected to the computer. Strange issue. And a frustrating one because I like to use USB a lot for transferring music and other files.
Installed AR 8.0 because from the description it sounded very "stock" but runs a lot better. It appears it isn't as stock as I had hoped.
slicnic911 said:
I was connecting fine over USB before installing AR and now it reboots the tablet whenever connected to the computer. Strange issue. And a frustrating one because I like to use USB a lot for transferring music and other files.
Installed AR 8.0 because from the description it sounded very "stock" but runs a lot better. It appears it isn't as stock as I had hoped.
Click to expand...
Click to collapse
Running stock jb and no root and connects fine to PC.
shaun298 said:
Running stock jb and no root and connects fine to PC.
Click to expand...
Click to collapse
thanks. connected fine for me on stock, too.
thankfully, the issue resolved after flashing darkman's compatibility pack 8.0. you should try rooting...
[Q] Can't get OTG to wok on NEXUS 4
I've flashed stock Kitkat and Installed Ziddey's custom kernel, got an OTG cable and made a Y USB cable, doesn't work =/ the only thing that happens is the phone charges.
The OTG cable is working just fine with the dok i tried to connect, I checked both on another device, the only thing I did to the stock android is installing the kernel.
I've also downloaded an app to check if OTG is enabled on my device and the result is positive.
Seems like the only thing I could have messed up is the Y cable, but it pretty simple- connect the wires to their matching color and isolate.
Please help me figure this one out, and if someone can post this on Ziddey's Thread I'd be grateful :silly:
Hello, I'm a new OPO owner and right now I'm on latest stock rooted CM11S. I love the phone and I was wondering if the Powered USB OTG cables (to charge the phone while using an USB device) work, and if they do, the stock CM kernel is enough or a custom one is needed.
Example of one such cable.
All the threads about it on the OPO forums are very inconclusive so I thought it was best to ask here.
Hi! I'm trying to manually update my phone to Nougat by flashing a 6.0 firmware but I'm not successful. All I get is a blinking green light and that's it. I've tried uninstalling/reinstalling the flash drivers, doing software repair via Xperia Companion, checking that USB debugging is enabled, but still nothing. I was wondering if anybody here has had the same experience as me.
Check the USB driver
Wysłane z mojego F8331 przy użyciu Tapatalka
Use a different USB port. If you're using a front port, try a back one. Even better, use a USB 3 port. I had the same with my front USB 2 ports, worked fine on one of the 3's.
Sent from my F8331 using Tapatalk
try disabling driver signature enforcement on windows startup page, win10 and win7 have different ways to disable this, look over google and try that it might help:fingers-crossed:
okay, i did another software repair via companion and that did it. finally on android nougat. thanks to everyone who responded!
Sent from my F8331 using XDA-Developers mobile app
My Blu Vivo Xl charging port stopped working but i use a universal charger but then the phone got soft bricked so i need to use a Usb to flash it but I can't... Does anyone know a way to flash it without a cable or with just wires? or even update it from stock recovery?