Hello,
Please help guys, its my son's phone and I think I have F' it up.
It keeps doing the evil "Bootloop". I went from 7.0 to 5.1.1 and then it started.
Here is the info:
Device: SM-G920V
ROM name: Verizon Firmware G920VVRS4DQD1
ROM version and base: 7.0
Build number: Stock
kernel version and its settings.
I went from 7.0 to 5.1.1 and has started rebooting once it boots to the "Activation of the phone".
I've tried
1. Wipe Partition cache.
2. Factory wipe/reset phone.
And nothing just keeps rebooting.
Tried flashing:
1.G920VVRU4CPK2 (6.0.1
2.G920VVRU4CPH1 (6.0.1)
3. And then G920VVRS4DQD1 7.0 again.
And same thing keeps rebooting at phone activation screen.
I have taken out SIM Card, left SIM Card
Thanks for any help you can lend.
:good:
Related
Recently I replaced our GS4's with new GS5's from Sprint. I rooted all 3 and am currently running stock odexed NK4.
2 of the 3 phones boot with the Sprint Logo and the Spark splash screen, but one of the phones only starts with the international version Samsung screen.
I've tried installing the ROM through odin several times but nothing changed.
Looking into why this was occurring I found that one of the phones CSC is XAS and the 2 phones that start with the Sprint screens are SPR
I've tried changing the CSC with a few App's but none of them work, most of the App's indicate that they won't work past Android 4.2.X, and of course these phones are 4.4.4
Any help would be appreciated.
SOLVED - I had to install a full TAR through Odin, allowed it to boot after the initial recovery ran, pulled the battery before the phone booted into the ROM, then I booted into the stock recovery, Wiped user data and Factory Reset, turned off phone, booted into Download mode, installed the full TAR again through Odin. This time when the phone booted back into the stock recovery it reported the CSC as SPR.
YAY!
I was running MikeD63017's CM12 on my Sprint S5 Sport, and I wanted to return to stock to get the latest stagefright fix. I used ODIN 3.10 to flash G860PVPU2BOC5_G860PSPT2BOC5_G860PVPU2BOC5_HOME.tar.md5. ODIN reported Success.
I'm now in a boot loop where it gets to the Samsung screen, "Preparing your device for 1st time use..." and then reboots. I've tried re-flashing to no avail. Samsung Keys 3 & the new Smart Switch PC software don't recognize my phone or manual input of model/serial.
I feel like an idiot - I'm now searching for G860PVPU2BOH1 firmware.
Fixed. User UPdownLoAD walked me through Wiping in stock recovery and I then re-flashed in ODIN.
Hey all,
I got my S7 (930F) today. I went through the 1st time setup and evrythin went smooth until my phone decided to reboot and got stuck in some kind of reboot loop.
As i searched google i read that i was no uncommon problem with samsung devices so i tried some of the things suggested (factory reset/cache whipe) .. nothing worked.
It just tried to boot, loaded my carrier homescreen for a second and went back to the Samsung Galaxy S7 powered by android screen and would do tht over and over.
So i tried to do a firmware update via Kies , looked like it worked but still ... wouldnt boot after.
Maybe the best way would have been to return it to my carrier and get a replace but since i am little bit techy i decided to search some more.
So i ended up flashin
2016-04-18 Austria (3 Hutchison) 6.0.1 G930FXXU1APD1 G930FDRE1APC3
this firmware (found on sammobile) via ODIN 3.10.7 and everything worked but still no boot , still stuck on the Samsung Galaxy S7 screen.
Did i total brick my phone? What else can i do?
Running out of ideas, any help would be great!
Hey guys, so I'm up for a new phone (had this phone for 2 years) and I remember having a friend root + flash me the cyanogenmod on my Samsung Galaxy S3
I decided to root/flash my current phone (Galaxy S5) and i ended up ****ing in on several fronts.
The following is what I did and where I ended up
Rooted phone through Odin - was successful but I got a feeling it was outdated as I got the Seandroid kernal thing in red
Got ROM Manager and flashed recovery to TWRP - successful
Flashed ROM to Cyanogenmod nightly 7/14/16 - used the wrong version so i couldn't use my phone to call
Flashed Rom to the correct version - successful
Installed Gapps zip so i can use the app store and etc - experienced issues as it was always saying the store failed and etc
Now where I am currently
I ended up wiping all the data and etc so I can flash back to the Stock ROM/firmware since I couldn't get the Gapps to work.
I tried to flash the firmware but everytime I flash it and it boots to the stock recovery and says "installing android update" it gets to 1/3rd where it says "Erasing" and boots up to the Sprint Logo where the Blue notif is on and it is stuck.
I'm assuming its soft bricked and on a bootloop and I am trying to see if I can salvage this phone.
I tried flashing different version of the firmware (my brother has the same phone his version is G900PVPS3CPE2) and i tried that and G900PVPU3CPA. Both times its says its successful on odin but upon booting it only gets 30% before it says erasing and returns to get stuck on the boot.
Can I salvage this phone and if so can someone guide me through the proccess (links to proper firmware download/etc)
I do not care if any data/apps is lost (i have important stuff backed up on my gmail), I just want my phone to work.
That being said, my phone is salvageable instead of guiding me to repairing my phone to stock, if they can guide me to set my phone to a custom ROM (cyanogenmod or anything they suggest assuming they can get the googleapps to work on it) can someone please guide me through that.
Thanks again for reading.
Edit: All info in a TLR format incase my wall of text was messy
Phone: Samsung Galaxy S5 SM-G900P (SPR) Android 6.0.1
problem: ****ed up with flashing now phone is stuck in bootloop
What I want: Find a solution to make my phone work, ideally to make it work using a custom rom(any works) that has a working google apps installed.
Hey guys,
My wife's Galaxy S6 - SM-G920P has been stuck in a boot-loop the last few days. I am unable to get past the login screen before it restarts. I cleared the cache and tried everything from the youtube link below, but I am running into a problem with the ODIN firmware update. I am using ODIN v3.12 and I am trying to install the below firmware update. Everything works fine, the firmware is uploaded to the phone. However, when the phone reboots and the blue screen comes up with installing updates, it keeps freezing at 32%, followed by an erasing of the update. The phone then repeats the boot loop again.
I am out of ideas and was hoping someone has encountered this issue before and can point me in the right direction.
Thanks in advance.
youtube.com/watch?v=YJi_w4c0KyE
FIRMWARE UPDATE
.sammobile.com/firmwares/galaxy-s6/SM-G920P/SPR/confirm/G920PVPS4DQF1/178566/
Bump...still having the problem
Try to change the version of ODIN and the firmware
did both, and now I can't even get to the login screen...any ideas on how to get out of the boot loop?
bump....still having the issue