Ported TWRP 3.2.1-0 from official X performance build.
You must have patched boot img with dm-verity and forced encryption disabled to flash anything or modify /system. Use rootkernel method posted in guides forum.
Note that I don't know anything about this stuff, I just followed a guide and it happened to work. I couldn't tell you anything technical.
https://mega.nz/#!Qs1CFSgZ!BVGolTbK6CRH0LBTw5By2p9yHAdUfjAjfq5KLyKB6cQ
Update - now working on O with root - https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479
Note - decrypt data not working, but system mods working normally.
levone1 said:
Ported TWRP 3.2.1-0 from official X performance build, if anyone wants to try. I was wondering if it might work on our new O, but its doesn't, (same issues as 3.1.1). Anyway, besides that, it seems working pretty good on N, so figured I'd share...
Note that I don't know anything about this stuff, I just followed a guide and it happened to work. I couldn't tell you anything technical.
https://mega.nz/#!Qs1CFSgZ!BVGolTbK6CRH0LBTw5By2p9yHAdUfjAjfq5KLyKB6cQ
Click to expand...
Click to collapse
Did you install it on your x compact? Did it work?
pw1nce said:
Did you install it on your x compact? Did it work?
Click to expand...
Click to collapse
Screenshot shows... Works fine on N as far as I can tell, but not on O.
twrp 3.2.1. Will the rescue boot work on XCompact?
I want to try
Everything works fine.Thank You.
TexHuk 3 said:
Everything works fine.Thank You.
Click to expand...
Click to collapse
X compact
For oreo?
eymentuna said:
X compact
For oreo?
Click to expand...
Click to collapse
Yes
TexHuk 3 said:
Yes
Click to expand...
Click to collapse
x compact 8.0.0 twrp 3.2.1 installation instructions please!
eymentuna said:
x compact 8.0.0 twrp 3.2.1 installation instructions please!
Click to expand...
Click to collapse
https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479
eymentuna said:
View attachment 4415240View attachment 4415241
Please help
Click to expand...
Click to collapse
You typed fastboot, supposed to type rootkernel
levone1 said:
You typed fastboot, supposed to type rootkernel
Click to expand...
Click to collapse
eymentuna said:
View attachment 4415436
Click to expand...
Click to collapse
command is 'rootkernel kernel.elf boot.img'. Your kernel.elf has to be named kernel.elf...
Just tested backup and restore on O, and working...
Does this one support decrypting an encrypted partition? I set a pin lock on the system and have encryption enabled. Entering the pin doesn't decrypt ir in twrp
trewelu said:
Does this one support decrypting an encrypted partition? I set a pin lock on the system and have encryption enabled. Entering the pin doesn't decrypt ir in twrp
Click to expand...
Click to collapse
Haven't tested encryption, but according to twrp changelog, issues on O were improved in 3.2, so probably won't work with anything older. Test and let us know...
trewelu said:
Does this one support decrypting an encrypted partition? I set a pin lock on the system and have encryption enabled. Entering the pin doesn't decrypt ir in twrp
Click to expand...
Click to collapse
BTW - you know that you have to patch boot img to disable dm-verity and forced encryption? Use rootkernel method.
levone1 said:
BTW - you know that you have to patch boot img to disable dm-verity and forced encryption? Use rootkernel method.
Click to expand...
Click to collapse
I know. I just intentionally keeping the force-encrypt. I tried all of pin, password on swipe/none. None of them work on twrp. I am not sure whether I did something wrong or it is not supported.
Next time I flash I would consider disabling the force encrypt.
trewelu said:
I know. I just intentionally keeping the force-encrypt. I tried all of pin, password on swipe/none. None of them work on twrp. I am not sure whether I did something wrong or it is not supported.
Next time I flash I would consider disabling the force encrypt.
Click to expand...
Click to collapse
I don't think it will work as long as Sony force encrypt is active. You can encrypt device through settings if you want. Maybe a more official TWRP will be able to do it...
Related
Hi everyone. I have a problem here . after i unlocked bl, and boot to recovery, i must enter a password to decrypt data.. as long as i remember ive never set a password to encrypt or decrypt data or my internal... so im stuck at twrp and cant flash the rom.. is there anyone out there facing the same problem?
shazwansulleh said:
Hi everyone. I have a problem here . after i unlocked bl, and boot to recovery, i must enter a password to decrypt data.. as long as i remember ive never set a password to encrypt or decrypt data or my internal... so im stuck at twrp and cant flash the rom.. is there anyone out there facing the same problem?
Click to expand...
Click to collapse
Which version of TWRP did you flash ?
Also, I have this problem too, but after set a PIN code (because of the fingerprint use) I have to enter a code in TWRP. I try the PIN code, and it's working
nathan30 said:
Which version of TWRP did you flash ?
Also, I have this problem too, but after set a PIN code (because of the fingerprint use) I have to enter a code in TWRP. I try the PIN code, and it's working
Click to expand...
Click to collapse
3.0.2-4 kagura. this one
shazwansulleh said:
3.0.2-4 kagura. this one
Click to expand...
Click to collapse
DId you set a PIN code or a schem ?
nathan30 said:
DId you set a PIN code or a schem ?
Click to expand...
Click to collapse
no. ive do nthing bout it..
how about your twrp? is it okay? mine after flash exiztnz, its gone. dont know why. and i cant boot to recivery anymore
shazwansulleh said:
no. ive do nthing bout it..
how about your twrp? is it okay? mine after flash exiztnz, its gone. dont know why. and i cant boot to recivery anymore
Click to expand...
Click to collapse
Yes I don't have any issues. Maybe you did something wrong during your procedure..
nathan30 said:
Yes I don't have any issues. Maybe you did something wrong during your procedure..
Click to expand...
Click to collapse
maybe.. but i dont know where im doing wrong. can you give me links to twrp that you use?
shazwansulleh said:
maybe.. but i dont know where im doing wrong. can you give me links to twrp that you use?
Click to expand...
Click to collapse
I wrote a guide with all the links you need here : https://forum.xda-developers.com/xperia-xz/how-to/how-to-unlock-bl-kernel-twrp-root-t3541648
nathan30 said:
I wrote a guide with all the links you need here : https://forum.xda-developers.com/xperia-xz/how-to/how-to-unlock-bl-kernel-twrp-root-t3541648
Click to expand...
Click to collapse
Thanks, right now im stuck at twrp... after i flash supersu, and try to reboot to system, i wont work. it keeps coming to twrp.. i dont why,, what shud i do?
shazwansulleh said:
Thanks, right now im stuck at twrp... after i flash supersu, and try to reboot to system, i wont work. it keeps coming to twrp.. i dont why,, what shud i do?
Click to expand...
Click to collapse
That sound weird. I suggest you to start it back. Flash a ROM via FlashTool, in order to start on a clean base
nathan30 said:
That sound weird. I suggest you to start it back. Flash a ROM via FlashTool, in order to start on a clean base
Click to expand...
Click to collapse
ok.. correct me if i do anything wrong with steps below.
1. reflash stock rom 6.0.1 (internal version taken from xperifirm)
2. flash androplus kernel using flashtool...
3. flash :TWRP-3.0.2-4-kagura:
4. flash custom rom
shazwansulleh said:
ok.. correct me if i do anything wrong with steps below.
1. reflash stock rom 6.0.1 (internal version taken from xperifirm)
2. flash androplus kernel using flashtool...
3. flash :TWRP-3.0.2-4-kagura:
4. flash custom rom
Click to expand...
Click to collapse
If your bootloader is unlock you don't have to downgrade to 6.0.1
For the rest, follow my guide. I didn't say to flash androplus through Flashtool, but through the terminal. Take some time to read it, and understand the procedure
nathan30 said:
If your bootloader is unlock you don't have to downgrade to 6.0.1
For the rest, follow my guide. I didn't say to flash androplus through Flashtool, but through the terminal. Take some time to read it, and understand the procedure
Click to expand...
Click to collapse
ive already on custom rom
shazwansulleh said:
ive already on custom rom
Click to expand...
Click to collapse
And ?
nathan30 said:
And ?
Click to expand...
Click to collapse
i dont know how to flash using terminal
shazwansulleh said:
i dont know how to flash using terminal
Click to expand...
Click to collapse
OMG did you take the time to read my guide ? I give all the needed tools, and what you have to type in the terminal.
nathan30 said:
OMG did you take the time to read my guide ? I give all the needed tools, and what you have to type in the terminal.
Click to expand...
Click to collapse
:"Put your phone in bootloader mode (POWER OFF then VOL UP while you're plug the USB cable IN or adb reboot bootloader)"
after i did this, nothing happens
shazwansulleh said:
Hi everyone. I have a problem here . after i unlocked bl, and boot to recovery, i must enter a password to decrypt data.. as long as i remember ive never set a password to encrypt or decrypt data or my internal... so im stuck at twrp and cant flash the rom.. is there anyone out there facing the same problem?
Click to expand...
Click to collapse
Cancel, allow modification and wipe data user.
esps said:
Cancel, allow modification and wipe data user.
Click to expand...
Click to collapse
Thanx man. Everything's work fine now. I just don't know how to use terminals since this is my first time unlocking. But its okay now.
But after fresh startup of device in to system then restart my phone and going back to twrp recovery mode then again it asks for password to decrypt?
Now wht can i do......
DOWNLOAD
(works on both lollipop and nougat bootloader)
HOW TO INSTALL
SOURCES
DEVICE:
https://github.com/Demon000/device_xiaomi_libra/tree/twrp
KERNEL:
https://github.com/LineageOS/android_kernel_xiaomi_msm8992
I just installed the more recent build on my Lollipop bootloader Libra to replace TeamSuperluminal's TWRP 3.0.2.
I had bugs with AndropaX's TWRP builds before, but everything seems okay with this one so far.
Thanks Cozzmy
Phlogistol said:
I just installed the more recent build on my Lollipop bootloader Libra to replace TeamSuperluminal's TWRP 3.0.2.
I had bugs with AndropaX's TWRP builds before, but everything seems okay with this one so far.
Thanks Cozzmy
Click to expand...
Click to collapse
You're welcome!
If you have any bugs please report them, will fix them as soon as I have time.
On Mi4s aqua, sdcard is not mounting
@op kindly cek how the twrp reading the build finger print as it failed to read the sytem build.prop instead its reading the twrp build.prop when it calls by edify on updater script, thus it makes ota flashing unsuccessful.... Thanks in advance keep up the good works.
Attached some ss.. (hope I sent the right ss, very hard to upload on mobile)
ViTAMiNCHEG said:
On Mi4s aqua, sdcard is not mounting
Click to expand...
Click to collapse
Are you sure? Should get mounted on /sdcard1
adewisman said:
@op kindly cek how the twrp reading the build finger print as it failed to read the sytem build.prop instead its reading the twrp build.prop when it calls by edify on updater script, thus it makes ota flashing unsuccessful.... Thanks in advance keep up the good works.
Attached some ss.. (hope I sent the right ss, very hard to upload on mobile)
Click to expand...
Click to collapse
I don't think build fingerprint has anything to do with it.
What exactly happens when it reboots to flash OTA?
Cozzmy13 said:
I don't think build fingerprint has anything to do with it.
What exactly happens when it reboots to flash OTA?
Click to expand...
Click to collapse
It failed bro ss attached and also some ss how the other twrp (zcx) successfully flashed the ota reads the build finger prints
Cozzmy13 said:
Are you sure? Should get mounted on /sdcard1
Click to expand...
Click to collapse
in recovery it shows sdcard1 (0mb) and when I try to select change storage, click, sdcard1, nothing happens
Cozzmy13 said:
Are you sure? Should get mounted on /sdcard1
Click to expand...
Click to collapse
Here is the recovery log file
ViTAMiNCHEG said:
Here is the recovery log file
Click to expand...
Click to collapse
Ok, l'll try to fix it tomorrow.
adewisman said:
It failed bro ss attached and also some ss how the other twrp (zcx) successfully flashed the ota reads the build finger prints
Click to expand...
Click to collapse
Can you give me recovery.log after trying to flash?
AFH directory updated with twrp-20170817-0823.img.
aqua sdcard should be fixed, @ViTAMiNCHEG
Cozzmy13 said:
AFH directory updated with twrp-20170817-0823.img.
aqua sdcard should be fixed, @ViTAMiNCHEG
Click to expand...
Click to collapse
Working. Confirmed! Thank you for the fast fix and release
ViTAMiNCHEG said:
Working. Confirmed! Thank you for the fast fix and release
Click to expand...
Click to collapse
Great. No problem.
Regarding MIUI OTA, investigation shows that I'd need to do some ugly hacks to support it. I'll think about it but I don't intend using MIUI or flashing it so I'll work blindly. And ZCX doesn't have sources anywhere so I can't look at it.
Thanks you !!!! You are best !!!!
im on lollipop bootloade and want instal ACPI I can use yours twrp?
Spluwicho said:
im on lollipop bootloade and want instal ACPI I can use yours twrp?
Click to expand...
Click to collapse
as @Cozzmy13 said, his twrp worked in lollipop or nougat bootloader :fingers-crossed:
So what's the current best way to get the nougat bootloader? I assume the file from AndropaX (here) is outdated as it is based on a beta version, right?
Maledict said:
So what's the current best way to get the nougat bootloader? I assume the file from AndropaX (here) is outdated as it is based on a beta version, right?
Click to expand...
Click to collapse
Do you think that in the newer roms there is a newer bootloader ...
libra-aqua_firmware_7.8.17.zip
The Galaxy S9 And Plus Treble Discussion
Great to see a treble sammy phone here
if any one booted head to the discussions down
There was one report of a user booting an S9 with the phh treble firmware. Apparently it run great for a completely unoptimised firmware
Sent from my SM-G965F using Tapatalk
Really really excited for this one ..
Jealous
I booted now AOSP 8.1 and an early lineage 15.1 build too.
iamnotkurtcobain said:
I booted now AOSP 8.1 and an early lineage 15.1 build too.
Click to expand...
Click to collapse
Any step by step how to install, or is it still in development? What is working on the rom? Thnx
dzontra83 said:
Any step by step how to install, or is it still in development? What is working on the rom? Thnx
Click to expand...
Click to collapse
Everything except all the samsungy tech such as iris scanner, double aperture thing and I believe it was auto brightness or something related to brightness slider.. Cmiw
Griffiths_Anna said:
Everything except all the samsungy tech such as iris scanner, double aperture thing and I believe it was auto brightness or something related to brightness slider.. Cmiw
Click to expand...
Click to collapse
Brightness slider bug is fixed. Just Fingerprint isn't 100% working atm.
iamnotkurtcobain said:
Brightness slider bug is fixed. Just Fingerprint isn't 100% working atm.
Click to expand...
Click to collapse
Any chance for a link, or a quick how to install guide
dzontra83 said:
Any chance for a link, or a quick how to install guide
Click to expand...
Click to collapse
How to flash:
- Obviously, unlock your bootloader
- Download the system.img on the first post
- Flash the system.img through twrp
- Do a Factory reset
- Reboot
Griffiths_Anna said:
How to flash:
- Obviously, unlock your bootloader
- Download the system.img on the first post
- Flash the system.img through twrp
- Do a Factory reset
- Reboot
Click to expand...
Click to collapse
There is nothing in the first post
dzontra83 said:
There is nothing in the first post
Click to expand...
Click to collapse
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Sorry wrong thread, didn't notice it
Choose the A only arm64
Any ideas why I can't flash system.img via twrp? It tells me I can't flash a system image to a file partition or something. I've had to use Odin to flash it by converting to a tar.md5
s3xxt0y said:
Any ideas why I can't flash system.img via twrp? It tells me I can't flash a system image to a file partition or something. I've had to use Odin to flash it by converting to a tar.md5
Click to expand...
Click to collapse
I also had the same issue with TWRP I flashed to stock with Odin since I was using a custom rom but I am in prenormal jail for 7 days if you figure it out please let me know.
I have the same problem. I am unable to update system.img. Is twrp while choosing system partition. Please help. I bit the big and rooted the device just to taste also.
Searching on internet about working twrp recovery for weekly developer 9.7.18 ROM, i find this TWRP who is working on this version of ROM. I have tested on chines weekly 9.7.18 and recovery install fine.
Code:
/*
*
* I am not responsible for bricked devices or components. Please
* do some research if you have any concerns about features included in this image
* before flashing it! YOU are choosing to make these modifications.
*
*/
After Install : Format data or wipe everything to decrypt storage
OriginalSource Thanks to Xiaomi-Miui.gr
DownloadFile
NEW WERSION DownloadFile
How to flash it if I'm already on 9.7.18 version and I can't boot into TWRP ?
Fikul said:
How to flash it if I'm already on 9.7.18 version and I can't boot into TWRP ?
Click to expand...
Click to collapse
Put your phone in fastboot mode, and flash by fastboot
fastboot flash recovery twrp.img
then start phone with buttons power on and vol+ to go back to twrp.
maybe you will have to do wipe data to clear encryption , i have to do that after flashing on chines 9.7.18
would be nice to tell as you have already install custom rom so maybe all will be ok.
Works like a charm with new developer 9.7.18 !
Fikul said:
Works like a charm with new developer 9.7.18 !
Click to expand...
Click to collapse
I am happy if it works
did you have to wipe/format data?
Flashed with the other TWRP, works perfectly, color is ugly af.
EDIT: OTG not working.
Schnedi said:
Flashed with the other TWRP, works perfectly, color is ugly af.
Click to expand...
Click to collapse
i agree color is ugly, but i dont know how to change color.
slavke1976 said:
I am happy if it works
did you have to wipe/format data?
Click to expand...
Click to collapse
Yes i had to format data because of encryption
Can somebody please do a noob tutorial on how to get this running on my phone please the last time I was in the flashing game Xiaomi phones came with unlocked bootloaders ?
Source down?
Any official recovery????
Shahkhalid zadran said:
Any official recovery????
Click to expand...
Click to collapse
None yet.
Koehlix said:
Source down?
Click to expand...
Click to collapse
Go to source page, and search in tab list k20/mi9t it will give you download link. https://xiaomi-miui.gr/community/index.php/Thread/25256-TWRP-3-3-X-X-για-συσκευές-XIAOMI/
but if you dont know just go here https://www.mediafire.com/file/0is4jdh0emuja4v/twrp_davinci_3.3.1_23-07-19_red_ss.img/file
Cant find my files in TWRP anymore. All is looking "crypted". Did a full wipe. Nothing helps.
FroZine said:
Cant find my files in TWRP anymore. All is looking "crypted". Did a full wipe. Nothing helps.
Click to expand...
Click to collapse
Same here.
Sent from my [device_name] using XDA-Developers Legacy app
Koehlix said:
Same here.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
You need to wipe everything (ALL DATA GONE) - working for me now
When I flashed the 'official' TWRP recovery I'm asked to enter a password to decrypt data. But how can I get the password??? If I press 'cancel' my folders are all encrypted
the steve said:
When I flashed the 'official' TWRP recovery I'm asked to enter a password to decrypt data. But how can I get the password??? If I press 'cancel' my folders are all encrypted
Click to expand...
Click to collapse
You put a password in Android for unlock your phone, it's this.
the steve said:
When I flashed the 'official' TWRP recovery I'm asked to enter a password to decrypt data. But how can I get the password??? If I press 'cancel' my folders are all encrypted
Click to expand...
Click to collapse
you have to enter password you use to unlock your phone (screen)
AlexCmb said:
You put a password in Android for unlock your phone, it's this.
Click to expand...
Click to collapse
slavke1976 said:
you have to enter password you use to unlock your phone (screen)
Click to expand...
Click to collapse
Thank you so very much! I didn't expect it would be that simple.
Anyway I can't boot to system anymore, it always ends in the recovery.
I flashed my phone (Xiaomi redmi 7) and I turn on the TWRP and its says "Enter password" its decrypt data and how i can fix this?
BeeperMaster21 said:
I flashed my phone (Xiaomi redmi 7) and I turn on the TWRP and its says "Enter password" its decrypt data and how i can fix this?
Click to expand...
Click to collapse
Remove lock screen passwords before using Twrp
NOSS8 said:
Remove lock screen passwords before using Twrp
Click to expand...
Click to collapse
I dont have any password
BeeperMaster21 said:
I dont have any password
Click to expand...
Click to collapse
No security on the lock screen?
What do you want to do with TWRP?
NOSS8 said:
No security on the lock screen?
What do you want to do with TWRP?
Click to expand...
Click to collapse
flash rom
BeeperMaster21 said:
flash rom
Click to expand...
Click to collapse
ok format data reboot twrp
NOSS8 said:
ok format data reboot twrp
Click to expand...
Click to collapse
i tryied it 1h ago 2 times and it doesnt work
BeeperMaster21 said:
i tryied it 1h ago 2 times and it doesnt work
Click to expand...
Click to collapse
Did you use the right TWRP?
format data write yes?
Sometimes we have to format the data 2 or 3 times before it works
in Twrp check cancel format data (if error red ligne)reboot twrp and format again
NOSS8 said:
Did you use the right TWRP?
format data write yes?
Sometimes we have to format the data 2 or 3 times before it works
Click to expand...
Click to collapse
im using version 3.3.0
yes
i will try it one again
BeeperMaster21 said:
im using version 3.3.0
yes
i will try it one again
Click to expand...
Click to collapse
i tried one again and same
BeeperMaster21 said:
i tried one again and saWhen
Click to expand...
Click to collapse
BeeperMaster21 said:
i tried one again and same
Click to expand...
Click to collapse
When you format data you got a error (red lignes)?
NOSS8 said:
ok format data reboot twrp
Click to expand...
Click to collapse
format is different with delete ... you need to format and delete userdata partition for TWRP to make it viewable
Format data. Flash magisk. Flash the attached file. Reboot
Tab E said:
Format data. Flash magisk. Flash the attached file. Reboot
Click to expand...
Click to collapse
tryied and nothing
NOSS8 said:
When you format data you got a error (red lignes)?
Click to expand...
Click to collapse
when im formating from twrp it doesnt have permisions but when im doing it from powershell its normaly working
@BeeperMaster21 could u try to provide some screenshots of your problem it will make it little bit easier to help u with your problem
Austinredstoner said:
@BeeperMaster21 could u try to provide some screenshots of your problem it will make it little bit easier to help u with your problem
Click to expand...
Click to collapse
Have u tried this
How to Delete Your Android Security PIN
This guide will walk you through deleting your security PIN via several methods. This guide is for those who have forgotten your security PIN and cannot
appuals.com
Austinredstoner said:
Have u tried this
How to Delete Your Android Security PIN
This guide will walk you through deleting your security PIN via several methods. This guide is for those who have forgotten your security PIN and cannot
appuals.com
Click to expand...
Click to collapse
i will try it
Austinredstoner said:
Have u tried this
How to Delete Your Android Security PIN
This guide will walk you through deleting your security PIN via several methods. This guide is for those who have forgotten your security PIN and cannot
appuals.com
Click to expand...
Click to collapse
i cant do this beacouse my phone is encrypted and i dont have permision to /data