DOWNLOAD
(works on both lollipop and nougat bootloader)
HOW TO INSTALL
SOURCES
DEVICE:
https://github.com/Demon000/device_xiaomi_libra/tree/twrp
KERNEL:
https://github.com/LineageOS/android_kernel_xiaomi_msm8992
I just installed the more recent build on my Lollipop bootloader Libra to replace TeamSuperluminal's TWRP 3.0.2.
I had bugs with AndropaX's TWRP builds before, but everything seems okay with this one so far.
Thanks Cozzmy
Phlogistol said:
I just installed the more recent build on my Lollipop bootloader Libra to replace TeamSuperluminal's TWRP 3.0.2.
I had bugs with AndropaX's TWRP builds before, but everything seems okay with this one so far.
Thanks Cozzmy
Click to expand...
Click to collapse
You're welcome!
If you have any bugs please report them, will fix them as soon as I have time.
On Mi4s aqua, sdcard is not mounting
@op kindly cek how the twrp reading the build finger print as it failed to read the sytem build.prop instead its reading the twrp build.prop when it calls by edify on updater script, thus it makes ota flashing unsuccessful.... Thanks in advance keep up the good works.
Attached some ss.. (hope I sent the right ss, very hard to upload on mobile)
ViTAMiNCHEG said:
On Mi4s aqua, sdcard is not mounting
Click to expand...
Click to collapse
Are you sure? Should get mounted on /sdcard1
adewisman said:
@op kindly cek how the twrp reading the build finger print as it failed to read the sytem build.prop instead its reading the twrp build.prop when it calls by edify on updater script, thus it makes ota flashing unsuccessful.... Thanks in advance keep up the good works.
Attached some ss.. (hope I sent the right ss, very hard to upload on mobile)
Click to expand...
Click to collapse
I don't think build fingerprint has anything to do with it.
What exactly happens when it reboots to flash OTA?
Cozzmy13 said:
I don't think build fingerprint has anything to do with it.
What exactly happens when it reboots to flash OTA?
Click to expand...
Click to collapse
It failed bro ss attached and also some ss how the other twrp (zcx) successfully flashed the ota reads the build finger prints
Cozzmy13 said:
Are you sure? Should get mounted on /sdcard1
Click to expand...
Click to collapse
in recovery it shows sdcard1 (0mb) and when I try to select change storage, click, sdcard1, nothing happens
Cozzmy13 said:
Are you sure? Should get mounted on /sdcard1
Click to expand...
Click to collapse
Here is the recovery log file
ViTAMiNCHEG said:
Here is the recovery log file
Click to expand...
Click to collapse
Ok, l'll try to fix it tomorrow.
adewisman said:
It failed bro ss attached and also some ss how the other twrp (zcx) successfully flashed the ota reads the build finger prints
Click to expand...
Click to collapse
Can you give me recovery.log after trying to flash?
AFH directory updated with twrp-20170817-0823.img.
aqua sdcard should be fixed, @ViTAMiNCHEG
Cozzmy13 said:
AFH directory updated with twrp-20170817-0823.img.
aqua sdcard should be fixed, @ViTAMiNCHEG
Click to expand...
Click to collapse
Working. Confirmed! Thank you for the fast fix and release
ViTAMiNCHEG said:
Working. Confirmed! Thank you for the fast fix and release
Click to expand...
Click to collapse
Great. No problem.
Regarding MIUI OTA, investigation shows that I'd need to do some ugly hacks to support it. I'll think about it but I don't intend using MIUI or flashing it so I'll work blindly. And ZCX doesn't have sources anywhere so I can't look at it.
Thanks you !!!! You are best !!!!
im on lollipop bootloade and want instal ACPI I can use yours twrp?
Spluwicho said:
im on lollipop bootloade and want instal ACPI I can use yours twrp?
Click to expand...
Click to collapse
as @Cozzmy13 said, his twrp worked in lollipop or nougat bootloader :fingers-crossed:
So what's the current best way to get the nougat bootloader? I assume the file from AndropaX (here) is outdated as it is based on a beta version, right?
Maledict said:
So what's the current best way to get the nougat bootloader? I assume the file from AndropaX (here) is outdated as it is based on a beta version, right?
Click to expand...
Click to collapse
Do you think that in the newer roms there is a newer bootloader ...
libra-aqua_firmware_7.8.17.zip
Related
I've been experimenting with some ideas to help get cm working but I don't have the One Mini.
If anyone with the AT&T HTC One Mini would like to test out a few builds of cm and recovery images just send me a message and I'll reply back with a link to my mediafire.
If you've got any questions, feel free to ask them here
And thanks in advance to all.
VoluntaryMan said:
I've been experimenting with some ideas to help get cm working but I don't have the One Mini.
If anyone with the AT&T HTC One Mini would like to test out a few builds of cm and recovery images just send me a message and I'll reply back with a link to my mediafire.
If you've got any questions, feel free to ask them here
And thanks in advance to all.
Click to expand...
Click to collapse
i've got an international one, not at&t.. useful ?
BENETNATH said:
i've got an international one, not at&t.. useful ?
Click to expand...
Click to collapse
According to this post, it should work.
It shouldn't matter. My at&t Mini is running an international ROM
I haven an At&t version. I would like to help
ok, so what have you to share with beta testers
i didn't take time to compile the actual gits, as it seems that some major functions are not still ok (eg . audio), plus i'm quite ok with 4.3 + sense.
if you've got more than that, i'm interested
BENETNATH said:
ok, so what have you to share with beta testers
i didn't take time to compile the actual gits, as it seems that some major functions are not still ok (eg . audio), plus i'm quite ok with 4.3 + sense.
if you've got more than that, i'm interested
Click to expand...
Click to collapse
I've been working on the installation glitches related to SELinux.
VoluntaryMan said:
I've been working on the installation glitches related to SELinux.
Click to expand...
Click to collapse
did you make a new recovery ?
i didn"t take time to compile and work on this, as i lack some spare time.
BENETNATH said:
did you make a new recovery ?
i didn"t take time to compile and work on this, as i lack some spare time.
Click to expand...
Click to collapse
yeah, kernel tweaks mostly.
VoluntaryMan said:
yeah, kernel tweaks mostly.
Click to expand...
Click to collapse
ok, currently, need it and no time to do trials, hope abzboi will be helpful ^^
i'm still following here
I just got home and I'm going to download the test 1(first one in the cm-11.0-sm-linaro) do i need to download the md5sum also? what i'm going to do is flash the cwm-m4-6.0.4.6-test1.img and then flash the rom. correct me if i'm wrong.
---------- Post added at 01:25 AM ---------- Previous post was at 01:02 AM ----------
I got installation aborted for test 1 with the cwm recovery.
It says:Finding update package...
Opening update package...
Installing update...
set_metadata_recursive: some changes failed
E:Error in /data/media/0/cm-11-20140113-UNOFFICIAL-TEST1-m4.zip
(status 7)
Installation aborted.
I'm going to try that recovery.img
Edit: same result with recovery.img one.
I'm going to try test2. btw what is that md5sum? what do i do with it? what i did was install the recovery in that folder both of em and i wipe data/factory reset. then install zip, choose zip from /sdcard,0/ then the cm11 test 1 and i got that result installation aborted.
Md5sum download is optional, use the recovery that matches the test number on the rom
VoluntaryMan said:
Md5sum download is optional, use the recovery that matches the test number on the rom
Click to expand...
Click to collapse
Same result. Tried test2 also.
abzboi said:
Same result. Tried test2 also.
Click to expand...
Click to collapse
Same error for TEST2? I was so sure this was it.. Well thanks.
VoluntaryMan said:
Same error for TEST2? I was so sure this was it.. Well thanks.
Click to expand...
Click to collapse
Np. Sorry for the waiting time. I wish it worked.
abzboi said:
Np. Sorry for the waiting time. I wish it worked.
Click to expand...
Click to collapse
no need to fastboot flash boot.img ?
qhat are your requirements ? s-off, bootloader unlocked ..?
BENETNATH said:
no need to fastboot flash boot.img ?
qhat are your requirements ? s-off, bootloader unlocked ..?
Click to expand...
Click to collapse
Rom couldn't be flash. It said installation aborted. (status 7). I'm s-off and unlocked. I really like cm roms. I hope there will be a working cm11 soon.
abzboi said:
Rom couldn't be flash. It said installation aborted. (status 7). I'm s-off and unlocked. I really like cm roms. I hope there will be a working cm11 soon.
Click to expand...
Click to collapse
status 7 is often due to the first line of the update-script, linked to assert
BENETNATH said:
status 7 is often due to the first line of the update-script, linked to assert
Click to expand...
Click to collapse
do u think there are any way to fix that?
BENETNATH said:
no need to fastboot flash boot.img ?
qhat are your requirements ? s-off, bootloader unlocked ..?
Click to expand...
Click to collapse
s-off just means you don't have to flash /boot manually.
abzboi said:
do u think there are any way to fix that?
Click to expand...
Click to collapse
yes, but I don't know what it is. Gotta do more reading online...
BENETNATH said:
status 7 is often due to the first line of the update-script, linked to assert
Click to expand...
Click to collapse
Status 7 here is because the command it's using requires selinux and something is improperly configured for that. I'm considering replacing the command...
How many ppl got bootloop after flashing SuperSU
download superusersu zip 2.62 http://forum.xda-developers.com/showpost.php?p=64161125
video link :https://www.youtube.com/watch?v=IggeUC9Apck
Far too many people If they would read the thread they would know that this happens...
Andus1988 said:
Far too many people If they would read the thread they would know that this happens...
Click to expand...
Click to collapse
working for me watch this vid u ill get it https://www.youtube.com/watch?v=IggeUC9Apck;)
Tjsdj said:
working for me watch this vid u ill get it https://www.youtube.com/watch?v=IggeUC9Apck;)
Click to expand...
Click to collapse
Nice to know :good: But I don't need it
@Tjsdj
How would be the exact procedure?
(1. Flash ROM and Gapps.)
(2. Reboot system.)
1. and 2. can be ignored if we have a running system I guess?!
3. Reboot into recovery.
4. Flash custom kernel and supersu 2.52 together.
5. Reboot system.
Am I right?
Andus1988 said:
@Tjsdj
How would be the exact procedure?
(1. Flash ROM and Gapps.)
(2. Reboot system.)
1. and 2. can be ignored if we have a running system I guess?!
3. Reboot into recovery.
4. Flash custom kernel and supersu 2.52 together.
5. Reboot system.
Am I right?
Click to expand...
Click to collapse
I didn't flashed both files together but it should work ,I flashed one by one but their is a issue if u dirtyflash new update later it will again go in bootloop
Tjsdj said:
I didn't flashed both files together but it should work ,I flashed one by one but their is a issue if u dirtyflash new update later it will again go in bootloop
Click to expand...
Click to collapse
So I won't try it... Nevertheless thank you :good:
Andus1988 said:
So I won't try it... Nevertheless thank you :good:
Click to expand...
Click to collapse
Su zip 2.62 works well no need to flash custom kernel
Tjsdj said:
Su zip 2.62 works well no need to flash custom kernel
Click to expand...
Click to collapse
Please report again whether it bootloops after a (dirty) update or not
Andus1988 said:
Please report again whether it bootloops after a (dirty) update or not
Click to expand...
Click to collapse
LoL sure
Tjsdj said:
LoL sure
Click to expand...
Click to collapse
1) Sure it will bootloop or 2) sure u will report?
Andus1988 said:
1) Sure it will bootloop or 2) sure u will report?
Click to expand...
Click to collapse
sure i will report but i dont think it will bootloop since not messed with kernel
Tjsdj said:
sure i will report but i dont think it will bootloop since not messed with kernel
Click to expand...
Click to collapse
Okay, I'm curious about it
Andus1988 said:
Please report again whether it bootloops after a (dirty) update or not
Click to expand...
Click to collapse
no issues with su.zip no bootloop working fine
Tjsdj said:
no issues with su.zip no bootloop working fine
Click to expand...
Click to collapse
Which build of CM 13 and SuperSU? Custom kernel needed?
Andus1988 said:
Which build of CM 13 and SuperSU? Custom kernel needed?
Click to expand...
Click to collapse
all build supported no custom kernel needed i am using it now on nexus exp
Change SElinux to permissive, It will work
jd2050 said:
Change SElinux to permissive, It will work
Click to expand...
Click to collapse
Are you sure?
SERVER HUAWEI
EVA-L19C432B322 (Huawei P9 Dual-Sim 3Gb/32Gb)
Filelist: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v66016/f1/full/filelist.xml
*************************************************
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v66016/f1/full/changelog.xml
MD5: 6F5AC56475F83AEC685E6783B45EB1D2
*************************************************
Update: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v66016/f1/full/update.zip
MD5: 8D2F6B06791409671E23A46396FBBFC6
Update.zip weighs: 1.4GB
*************************************************
More information on the Filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v66016/f1/full/filelist.xml
*************************************************
NOTES:
- Installation must be made by TWRP using an unlocked bootloader (dload method doesn't work)
- Additional update that contains missing apps from the beta build. Also contains build number corrected. Have to be flashed just after the rom update.zip (without rebooting between flashes): https://yadi.sk/d/PzGiKXn6yYS2b (thanks to sand_phoenix and kep2008)
- It is possible to rollback to stock EMUI 4.1.1 / Android 6 without any problems using the offical rollback package from Huawei.
INSTALLATION:
1) Unlock bootloader
2) Install TWRP Recovery
3) Flash UPDATE.ZIP (the first flash containing L19C432B322: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v66016/f1/full/update.zip)
4) Flash additional UPDATE.ZIP (from: https://yadi.sk/d/PzGiKXn6yYS2b)
5) Reboot System from TWRP and Enjoy Nougat on your P19 Dual-SIM
Steps 3 and 4 must be done while in TWRP (flash one after the other). You can't reboot after first flash because you will not have TWRP installed after rebooting.
USE IT AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY BROKEN RELATED TO IT
Tried to update from L19C432B182 and it fails at 37%... (system is not touched and everything is restored back )
jamorimpt said:
Tried to update from L19C432B182 and it fails at 37%... (system is not touched and everything is restored back )
Click to expand...
Click to collapse
The same here.
Kyuzo_Sama said:
The same here.
Click to expand...
Click to collapse
Flash tru TWRP without root.
Mostar088 said:
Flash tru TWRP without root.
Click to expand...
Click to collapse
Sorry ? "Flash tru" ? I'm not English, I don't understand this expression.
Kyuzo_Sama said:
Sorry ? "Flash tru" ? I'm not English, I don't understand this expression.
Click to expand...
Click to collapse
U need to unlock bootloader and install TWRP, and flash the update.zip with TWRP.
Mostar088 said:
U need to unlock bootloader and install TWRP, and flash the update.zip with TWRP.
Click to expand...
Click to collapse
You think this will resolve the problem ?
Mostar088 said:
Flash tru TWRP without root.
Click to expand...
Click to collapse
It Worked Thanks.
For everyone trying this: please Note that there is no Camera app, Keyboard app or Files App on this build.
- Additional update that contains missing apps from the beta build. Also contains build number corrected. Have to be flashed just after the update.app (without rebooting between flashes): https://yadi.sk/d/PzGiKXn6yYS2b (thanks to sand_phoenix and kep2008)
jamorimpt said:
It Worked Thanks.
For everyone trying this: please Note that there is no Camera app, Keyboard app or Files App on this build.
Click to expand...
Click to collapse
Np
jamorimpt said:
It Worked Thanks.
For everyone trying this: please Note that there is no Camera app, Keyboard app or Files App on this build.
Click to expand...
Click to collapse
Odd; the camera app is there in the UPDATE.APP file:
Maybe there's just no shortcut to launch it?
Will this work on L19c636?
Here's the about screen
reycosare said:
Will this work on L19c636?
Click to expand...
Click to collapse
Don't think so, since it's for the C432 region version. Don't know if you convert your cust to 432 it would work.
Atarii said:
Odd; the camera app is there in the UPDATE.APP file:
Maybe there's just no shortcut to launch it?
Click to expand...
Click to collapse
Thanks, trying to find it
reycosare said:
Will this work on L19c636?
Click to expand...
Click to collapse
L19 C636 B320
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v65523/f1/full/update.zip
Mostar088 said:
L19 C636 B320?*Download
Click to expand...
Click to collapse
Do you have a link?
reycosare said:
Do you have a link?
Click to expand...
Click to collapse
There it is now.
Mostar088 said:
There it is now.
Click to expand...
Click to collapse
I mean link for L19c636b320?
reycosare said:
I mean link for L19c636b320?
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v65523/f1/full/update.zip
Mostar088 said:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v65523/f1/full/update.zip
Click to expand...
Click to collapse
Can I flash this via dload?
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
veetosmies said:
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
Click to expand...
Click to collapse
I guess you could try to boot into TWRP --> Wipe --> Format Data --> Ext4(if it asks)
Or try to re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
veetosmies said:
Hello. I was encrypting my phone using android setting feature. It started to encrypt then it rebooted and it was on honor logo. I have twrp and unlocked bootloader and rooted.
Any solutions?
Click to expand...
Click to collapse
have you solved your problem or need help?
miststudent2011 said:
have you solved your problem or need help?
Click to expand...
Click to collapse
I'm now going to try re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/hon...-play-t3515702
veetosmies said:
I'm now going to try re-install stock firmware with some official way or in TWRP by following this guide https://forum.xda-developers.com/hon...-play-t3515702
Click to expand...
Click to collapse
page not found?
404 Error
miststudent2011 said:
page not found?
404 Error
Click to expand...
Click to collapse
Oh. What happened to that site?
But i have the needed files to try to re install stock rom if it doesnt work do you have any ideas?
veetosmies said:
Oh. What happened to that site?
But i have the needed files to try to re install stock rom if it doesnt work do you have any ideas?
Click to expand...
Click to collapse
Just recheck URL you have copied it from quoted text which removes text in between the URL .
Copy it directly from the browser URL.
miststudent2011 said:
Just recheck URL you have copied it from quoted text which removes text in between the URL .
Copy it directly from the browser URL.
Click to expand...
Click to collapse
that did not work.... i got original recovery back but when im trying to install update.app it fails at 5%.
any ideas?
veetosmies said:
that did not work.... i got original recovery back but when im trying to install update.app it fails at 5%.
any ideas?
Click to expand...
Click to collapse
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
veetosmies said:
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
Click to expand...
Click to collapse
That means you have successfully recovered your device right?
Did you get build number back correctly or do you have banlong bug?
Thanks for helping guys!
miststudent2011 said:
That means you have successfully recovered your device right?
Did you get build number back correctly or do you have banlong bug?
Click to expand...
Click to collapse
Yes.
Whats is banlong?
veetosmies said:
Yes.
Whats is banlong?
Click to expand...
Click to collapse
Go to phone details menu and check what build number do you have?
miststudent2011 said:
Go to phone details menu and check what build number do you have?
Click to expand...
Click to collapse
Build number is CHM-U01C432B560
veetosmies said:
Build number is CHM-U01C432B560
Click to expand...
Click to collapse
Okay that's fine you don't have balong bug.
If you ever wish to install custom ROM or P8lite ROM's
Follow my thread here.
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
veetosmies said:
oh i forgot one thing i had to format cache before boot. (when i was reading the post something started to fly very loudly in my room so i got scared xD) now it works fine.
Click to expand...
Click to collapse
So can this community know how u solved the issue ?
gopinaidu77 said:
So can this community know how u solved the issue ?
Click to expand...
Click to collapse
I downloaded this http://download969.mediafire.com/xqlhgoufnstg/w9ms2fh8fr0atxi/updateappflasher.zip
And then I downloaded UPDATE.APP and moved it into that zip file and then I mounted all partitions and flashed normally using twrp. Before first boot format cache and data. Also you need unlocked bootloader.
gopinaidu77 said:
So can this community know how u solved the issue ?
Click to expand...
Click to collapse
veetosmies said:
I downloaded this http://download969.mediafire.com/xqlhgoufnstg/w9ms2fh8fr0atxi/updateappflasher.zip
And then I downloaded UPDATE.APP and moved it into that zip file and then I mounted all partitions and flashed normally using twrp. Before first boot format cache and data. Also you need unlocked bootloader.
Click to expand...
Click to collapse
Bro @gopinaidu77 look at this. Update.app flasher.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Bro @gopinaidu77 look at this. Update.app flasher.
Click to expand...
Click to collapse
Yeah the same i did with my previous one bro. I too made my own zips for flashing stock rom from twrp
gopinaidu77 said:
Yeah the same i did with my previous one bro. I too made my own zips for flashing stock rom from twrp
Click to expand...
Click to collapse
It'snthe first time I saw this update.app flasher.
Sent from my Honor 8 using XDA Labs
https://androidfilehost.com/?fid=11410963190603852543
Here latest rom by @kenga
Give our support :highfive::good:
Damn those are great news. Thank you for keeping this device alive.
Hope I will get my screen replacement soon, so I can test this.
Sent from my Redmi Note 5 using Tapatalk
I wonder how to flash it:crying:
Just like "ordinary" flash custom rom or any new tips for flash this rom ??
rianawirawan said:
Just like "ordinary" flash custom rom or any new tips for flash this rom ??
Click to expand...
Click to collapse
Unfortunately, i failed flash this rom. ERROR 7 and when i was deleted "assert...", invalid zip happened
rianawirawan said:
Unfortunately, i failed flash this rom. ERROR 7 and when i was deleted "assert...", invalid zip happened
Click to expand...
Click to collapse
Still error 7
rianawirawan said:
Still error 7
Click to expand...
Click to collapse
upgrade twrp
celrau said:
upgrade twrp
Click to expand...
Click to collapse
Right now, i'm using 3.1.1 -1 btw
It's latest twrp ver from official
This ROM is running smoothly on my device guys :angel:
rianawirawan said:
Right now, i'm using 3.1.1 -1 btw
It's latest twrp ver from official
Click to expand...
Click to collapse
There is a 3.2.x around. If you don't want to bother go in the zip, /META-INF/com/google/android/ and delete the first lines (the ones starting with "assert") from updater-script, save and flash again.
celrau said:
There is a 3.2.x around. If you don't want to bother go in the zip, /META-INF/com/google/android/ and delete the first lines (the ones starting with "assert") from updater-script, save and flash again.
Click to expand...
Click to collapse
I did it, but still error 7
rianawirawan said:
I did it, but still error 7
Click to expand...
Click to collapse
Flash this file after you flash the ROM, and don't forget to flash the Gapps
cacafaruq said:
Flash this file after you flash the ROM, and don't forget to flash the Gapps
Click to expand...
Click to collapse
"Flash this file after flash the ROM" ?? U mean flash "this file" before flash the ROM, right ?
Because when i'm flashing the ROM, it said error 7.
Or I must update twrp using Vovan77's twrp ??
cacafaruq said:
Flash this file after you flash the ROM, and don't forget to flash the Gapps
Click to expand...
Click to collapse
On the contrary, forget about gapps. Why promote spyware when there's a lot of good open source software for all practical purposes? Unless there is a particular need for some google app because of job or something . F..k gapps. Besides, a lot of people complain about very good roms 'because they didn't know better and flashed gapps right away.
^ true
Finally, the one and only is update twrp from Vovan77's twrp. Thank you.
rianawirawan said:
Finally, the one and only is update twrp from Vovan77's twrp. Thank you.
Click to expand...
Click to collapse
This
rianawirawan said:
This
Click to expand...
Click to collapse
First day, this Pie is better than Oreo build. Thank you so much. Feels snappy and very good for daily driver.
How it's doing after a week of usage? Can you recommend it for 7.1 replacement?
Does it work with lollipop bootloader?