Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
Hi! After how many days of searching for sol'ns, I couldn't fix the s920 of my friend.
History: I rooted and installed twrp recovery, and forgot to unlock the bootloader of the phone (I didn't done any nandroid backup ). I did a basic factory reset then when I flashed a custom rom, it failed . Then when i rebooted the phone, it was stucked at bootloop. I couldn't access bootloader (since it wasn't unlocked) but I can still acces the twrp recovery. Then I decided to download it's stock rom/firmware but it failed. The error was showing E: unable to mount /data, unable to mount /emmc, unable to mount storage.
Is there any way I can fix this? I tried wiping again the data and storage but it shows the same error
I tried using spflash tool but flashing also failed, it can't detect the phone. The mediatek preloader USB VCOM appears at first then after 1-2 seconds it disappears. When i open the driver, it shows the phone isn't connected (code 45). I badly ne.eded help . Thank you
XDA Visitor said:
Hi! After how many days of searching for sol'ns, I couldn't fix the s920 of my friend.
History: I rooted and installed twrp recovery, and forgot to unlock the bootloader of the phone (I didn't done any nandroid backup ). I did a basic factory reset then when I flashed a custom rom, it failed . Then when i rebooted the phone, it was stucked at bootloop. I couldn't access bootloader (since it wasn't unlocked) but I can still acces the twrp recovery. Then I decided to download it's stock rom/firmware but it failed. The error was showing E: unable to mount /data, unable to mount /emmc, unable to mount storage.
Is there any way I can fix this? I tried wiping again the data and storage but it shows the same error
I tried using spflash tool but flashing also failed, it can't detect the phone. The mediatek preloader USB VCOM appears at first then after 1-2 seconds it disappears. When i open the driver, it shows the phone isn't connected (code 45). I badly ne.eded help . Thank you
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, please create an account so you can post in other forums. After that, you can ask your question here:
Android Q&A
You'll find expert advice there. Good luck and welcome to XDA!
Hi,
I've rooted my Yu Yunique mobile and installed TWRP recovery and deleted the OS without backup. When I tried to install custom/stock os back in my phone, TWRP shows failed to flash os. And now I cant do anything, even if I connected my phone with computer, nothing shows up.It seems I've deleted drivers in mobile too. When I fastbooted device it boots with clockworkmod.Pls hlp me to get my phone back. Guide me to install an android in a device that seems like a newly manufactured without an OS
adam_iqshan said:
Hi,
I've rooted my Yu Yunique mobile and installed TWRP recovery and deleted the OS without backup. When I tried to install custom/stock os back in my phone, TWRP shows failed to flash os. And now I cant do anything, even if I connected my phone with computer, nothing shows up.It seems I've deleted drivers in mobile too. When I fastbooted device it boots with clockworkmod.Pls hlp me to get my phone back. Guide me to install an android in a device that seems like a newly manufactured without an OS
Click to expand...
Click to collapse
which version of twrp are u using?
I dont know exactly. Might be a new version which has black colored theme.not the one with blue theme.
adam_iqshan said:
Hi,
I've rooted my Yu Yunique mobile and installed TWRP recovery and deleted the OS without backup. When I tried to install custom/stock os back in my phone, TWRP shows failed to flash os. And now I cant do anything, even if I connected my phone with computer, nothing shows up.It seems I've deleted drivers in mobile too. When I fastbooted device it boots with clockworkmod.Pls hlp me to get my phone back. Guide me to install an android in a device that seems like a newly manufactured without an OS
Click to expand...
Click to collapse
Follow this guide and tell me if you face any issues..
http://forum.xda-developers.com/yu-yunique/development/jalebi-flashing-stock-firmware-yu-t3430646
Hello guys,
I've a S6 SM-G920F with Nougat 7.0 update.
i want to root it but i c'ant connect to any pc, i've unkow USB device issue.
I tested debug USB, MTP to PTP mode, Smart switch and some Samsung drivers from Samsung site but nothing works.
I've saw how to install Recovery or root without pc but nothing works.
Installing recovery needs root and kngoroot, framaroot don't work.
i could install superSU zip from stock android recovery but :
1 - Android recovery can't mount sdcard
2 - i can't copy the zip file in /data for system update because i need root for this ....
is there a solution to root my device ?
kostilus said:
Hello guys,
I've a S6 SM-G920F with Nougat 7.0 update.
i want to root it but i c'ant connect to any pc, i've unkow USB device issue.
I tested debug USB, MTP to PTP mode, Smart switch and some Samsung drivers from Samsung site but nothing works.
I've saw how to install Recovery or root without pc but nothing works.
Installing recovery needs root and kngoroot, framaroot don't work.
i could install superSU zip from stock android recovery but :
1 - Android recovery can't mount sdcard
2 - i can't copy the zip file in /data for system update because i need root for this ....
is there a solution to root my device ?
Click to expand...
Click to collapse
Just broken USB-port and without it is no way for root/TWRP etc.
rifek4 said:
Just broken USB-port and without it is no way for root/TWRP etc.
Click to expand...
Click to collapse
Thanks for your reply
I know the USB port is broken but I had a little hope for any solution.
I will search for repair this port
are you sure if you have a USB broken? I have the same problem.. Not recognized by computer.. No otg.. Fast charging not works.. Bud I replaced the charger pin and flex and didn't fix it. I'm almost sure is a related software problem. Since updated to Nougat.
Is it possible to root InFocus Turbo 5 Plus from stock recovery...? Like Root Update from sd card... Please Help i want to root my device . I cant proceed in other way, Like Installing TWRP or CWM because im having problem with connecting my device to my computer . when i plug my device to my computer the device drivers not successfully installed i tried so many times, Even after i format the device the problem exists , dont know what happend to my device. I want to reinstall stock firmware but there is no choice to proceed with. Please i need help...