Hi! After how many days of searching for sol'ns, I couldn't fix the s920 of my friend.
History: I rooted and installed twrp recovery, and forgot to unlock the bootloader of the phone (I didn't done any nandroid backup ). I did a basic factory reset then when I flashed a custom rom, it failed . Then when i rebooted the phone, it was stucked at bootloop. I couldn't access bootloader (since it wasn't unlocked) but I can still acces the twrp recovery. Then I decided to download it's stock rom/firmware but it failed. The error was showing E: unable to mount /data, unable to mount /emmc, unable to mount storage.
Is there any way I can fix this? I tried wiping again the data and storage but it shows the same error
I tried using spflash tool but flashing also failed, it can't detect the phone. The mediatek preloader USB VCOM appears at first then after 1-2 seconds it disappears. When i open the driver, it shows the phone isn't connected (code 45). I badly ne.eded help . Thank you
XDA Visitor said:
Hi! After how many days of searching for sol'ns, I couldn't fix the s920 of my friend.
History: I rooted and installed twrp recovery, and forgot to unlock the bootloader of the phone (I didn't done any nandroid backup ). I did a basic factory reset then when I flashed a custom rom, it failed . Then when i rebooted the phone, it was stucked at bootloop. I couldn't access bootloader (since it wasn't unlocked) but I can still acces the twrp recovery. Then I decided to download it's stock rom/firmware but it failed. The error was showing E: unable to mount /data, unable to mount /emmc, unable to mount storage.
Is there any way I can fix this? I tried wiping again the data and storage but it shows the same error
I tried using spflash tool but flashing also failed, it can't detect the phone. The mediatek preloader USB VCOM appears at first then after 1-2 seconds it disappears. When i open the driver, it shows the phone isn't connected (code 45). I badly ne.eded help . Thank you
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, please create an account so you can post in other forums. After that, you can ask your question here:
Android Q&A
You'll find expert advice there. Good luck and welcome to XDA!
Related
I recently rooted my Micromax Canvas 2 A110 using rootgenius.
Then I installed TWRP recovery
Finally, I went to Settings>backup and reset>factory data reset
Phone rebooted, into twrp, a message came saying:
" updatind partition details...
formatting cache using mke2fs
done.
formatting data using mk2fs
done."
phone reboots again, shows canvas logo, then teamwin lolo, then same message comes again, this happens again and again. :crying:
Then I removed the battery and thought of flashing stock ROM via sp flash tool, but the process does not start. :crying: (Maybe phone is not being detected)
So, I installed VCOM drivers and device drivers, still not detected.
I can't get to recovery, whenever i put it on charging, connect it to usb, power on, same message comes up :crying:
What should I do now? Experts, please help me... :crying: :crying: :crying:
Thanks
OmG This Is a big error i suggest u go to google and search a another ROM and put it on sd abd thn go to recovery and try to instal or with pc
I bought zte nubia z9 mini a week ago and it was in cncommon v1.16 rom i installed one click root and twrp recovery installer i flashed the Chinese rom from navin in xda site itself the after flashing that rom i wasn't able to boot into recovery and when i press vol up + power it only showed the Nubia logo and i wasn't able to install the twrp from the rom manager app ,twrp app and anything else, then i did factory reset from the phone itself . after that situation got worse. That is i can't reboot or access the recovery .i tried to flash roms from needrom website (v1.16) through cmd and it didn't worked i tried Nubia restoration tool but it always showed error i tried using qpst .my device is shown in device manager as qh -usb qloader 9008 i downloaded few roms and none of then didd not contained firehose,rawprogram.xml and patck0.xml.i downloaded these files from internet and tried to flash using qpst but it always shows sahara error . i can access the fastboot (vol down + power) from fastboot i can't acces anything down there .i tried to flash rom using fastboot and it showed successful in pc but phone is at it was .
The bottomline is i Hove a twrp backup and i want to restore it in my device .please help . thanks
Hello,
Welcome to XDA.
I think the thread linked below seems to deal with having the same issues you are having. Try posting your issue in that thread.
http://forum.xda-developers.com/android/help/zte-nubia-z9-mini-urgent-help-required-t3130991
Someone there may be able to help.
Register an XDA account to post and reply in the forums.
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Hello,
My device is Lenovo Z90a40/Vibe Shot
My problem is when trying to install mokee from twrp
so first i delete data,dalvik cache etc. and somehow my phone shutted down
now im stuck at twrp and cant flash anything
tried to use QFil, says port 9006
and tried to flash rom from SD card, phone doesnt even detected it :crying:
so i can access twrp but i have no rom inside my int. storage
help please?
sorry if you dont understand