[Completed] help i bricked my zte nubia z9 mini and i cant access the twrp recovery also - XDA Assist

I bought zte nubia z9 mini a week ago and it was in cncommon v1.16 rom i installed one click root and twrp recovery installer i flashed the Chinese rom from navin in xda site itself the after flashing that rom i wasn't able to boot into recovery and when i press vol up + power it only showed the Nubia logo and i wasn't able to install the twrp from the rom manager app ,twrp app and anything else, then i did factory reset from the phone itself . after that situation got worse. That is i can't reboot or access the recovery .i tried to flash roms from needrom website (v1.16) through cmd and it didn't worked i tried Nubia restoration tool but it always showed error i tried using qpst .my device is shown in device manager as qh -usb qloader 9008 i downloaded few roms and none of then didd not contained firehose,rawprogram.xml and patck0.xml.i downloaded these files from internet and tried to flash using qpst but it always shows sahara error . i can access the fastboot (vol down + power) from fastboot i can't acces anything down there .i tried to flash rom using fastboot and it showed successful in pc but phone is at it was .
The bottomline is i Hove a twrp backup and i want to restore it in my device .please help . thanks

Hello,
Welcome to XDA.
I think the thread linked below seems to deal with having the same issues you are having. Try posting your issue in that thread.
http://forum.xda-developers.com/android/help/zte-nubia-z9-mini-urgent-help-required-t3130991
Someone there may be able to help.
Register an XDA account to post and reply in the forums.

Related

[Completed] G2 LS980 32GB fastboot mode started error

Plz!!! Help me ! sry for my english,i tried to flash twrp recovery with autorec apk at my g2 ls980,but i flashed wrong d802's twrp recovery,then my ph show "fastboot mode started..." stucking at it,fastboot mode
well work,i can type fastboot
commond,now i m trying to go
back to stock firmware and
when i entering download
mode,my device doesn't detect
at my computer,i tried to flash laf.img,but when i join my ph in downloading mode,the device does not detect and appear in device manager.
Plz guide me,Sir!
Hi, thank you for using XDA Assist. I would flash the stock firmware and start the process all over. See this, http://forum.xda-developers.com/sprint-g2/general/how-to-restore-downgrade-install-t2863050. Also, if you have further questions see your device's specific fork here, http://forum.xda-developers.com/sprint-g2
Thread closed.

[Completed] How to recover android though a nandroid backup

hello everyone
I have soft bricked my phone while flashing cm12.1 on my YU YUNIQUE YU4711
the problem is that i cant start my phone and neither i can go to the recovery of my phone
whenever i try to oprn the recovery it shows cyanogen fastboot mode...
now i was thinking that can i recover my phone using a nandroid backup that i created earlier using some softwares on my pc....
also when i try to flash anything on my smartphone using fastboot in cmd it shows waiting for device
so is there any way by which i can recover my phone....
Also tell me how to solve the waiting for device in fastboot
thanks in advance
bhaskar_22 said:
hello everyone
I have soft bricked my phone while flashing cm12.1 on my YU YUNIQUE YU4711
the problem is that i cant start my phone and neither i can go to the recovery of my phone
whenever i try to oprn the recovery it shows cyanogen fastboot mode...
now i was thinking that can i recover my phone using a nandroid backup that i created earlier using some softwares on my pc....
also when i try to flash anything on my smartphone using fastboot in cmd it shows waiting for device
so is there any way by which i can recover my phone....
Also tell me how to solve the waiting for device in fastboot
thanks in advance
Click to expand...
Click to collapse
Hello,
It seems that you've already posted your issue in the right section http://forum.xda-developers.com/showthread.php?p=64527817 and @Droidriven has already replied to you.Install the proper device drivers and the device will be detected in fastboot.For any further questions you can post in the Android Q&A Section.
Thread Closed!
___
v7
XDA Assist

Lenovo phab (not plus) pb1-750m

Hi
I have just got a PHAB PB1-750M. I cant see any TWRP/Custom roms for it, only the plus version (770M which has a different processor)
Anyone know if another phones roms are compatible?
The processor is a qualcomm 410 (quad core)
thanks
u can root using kingroot or kingoroot... default stock rom http://www.needrom.com/download/lenovo-phab-pb1-750m/ .... flash using qfil on qpst...
I recommend waiting for more time than root now. Cuz I don't see enough literature in the forums for this device yet. Hopefully there will be more users of this device in the near future. I currently own one of these, but I haven't tinkered with it for the fear of bricking it and no real forums available for this device to help me out. I haven't even found any mainstream review for this product. All is see is for the Phab Plus model.
dearbasheer said:
I recommend waiting for more time than root now. Cuz I don't see enough literature in the forums for this device yet. Hopefully there will be more users of this device in the near future. I currently own one of these, but I haven't tinkered with it for the fear of bricking it and no real forums available for this device to help me out. I haven't even found any mainstream review for this product. All is see is for the Phab Plus model.
Click to expand...
Click to collapse
nope....I"m tired of looking for "install TWRP recovery" for this device even though rooted by kingroot. I need TWRP for flashing Xposed.
Any comment?
pb1-750m stuck
Can anybody help me? My phab is stuck on the lenovo logo, i've already done reset to factory settings and wipe cache, but its still stuck on the logo.
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
i am also looking to custom recovery for my phab. is there available now?
Lenovo PB1-750M Stuck
Good Day sir, May I Have the Links on the required files.. My devices is on bootloop.
PB1-750M
Ive tried QFIL but there is a sahara and patching error. Please help
Hello,
i have a Phab 750P
not 750M
can I use the firmware also
best regards
floyd
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
Please help me!!
Links??
I have the rom, where I find drivers?
OsirisMatus said:
Please help me!!
Links??
I have the rom, where I find drivers?
Click to expand...
Click to collapse
Maybe this could help. Please read through the comments before doing anything. Try at your own risk. I haven't used those on my Phab.
http://www.needrom.com/download/lenovo-phab-pb1-750m/
https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
And if you do try it, please leave a comment on your experience to help me and others in the future.
bricked phab
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
hi
My lenovo phab (not phab plus) stuck on recovery mode....not booting into system after updating system....
i tried to flash new rom with QFIL. but phab is not detected by it, saying no port available
tried ADB with adb devices command...phab not listed.....
fastboot not accessible....how to flash rom...kindly help.......
naveen3807 said:
hi
My lenovo phab (not phab plus) stuck on recovery mode....not booting into system after updating system....
i tried to flash new rom with QFIL. but phab is not detected by it, saying no port available
tried ADB with adb devices command...phab not listed.....
fastboot not accessible....how to flash rom...kindly help.......
Click to expand...
Click to collapse
You have to install the Lenovo drivers for your phone to be detected/recognized.
Solved
Thx for ur help.... recovered my phab....
Is der any compatible custom recovery for phab? I need xposed for my phab....can u suggest how to install it...
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
I need link for stock rom( Lollipop 5.1.1) for Phab model, the one which is available may be a lower version , got error sahara protocol error the tool is unable to flash the rom image.
Click to expand...
Click to collapse
I have a "Lenovo PHAB PB1-750 m" Android 6.0.1. I tried to root using "NewKingroot", but it didn't work. You have to please anyone on your Android 6.0.1 root?
could you please post the links? thank you so much
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
Could you please post the links?
Check my guide here
Cheers.
PB1 750M Root
hi
please follow the instruction provided on this link. https://forum.xda-developers.com/android/help/install-twrp-rooting-phab-plus-rooting-t3290347.
Its XDA forum link.

[Completed] BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios

[Completed] [HELP] TWRP Flash soft-bricked my phone

Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
VitorMac10 said:
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Please get further help on general help section...
http://forum.xda-developers.com/android/help
Good luck

Categories

Resources