Plz!!! Help me ! sry for my english,i tried to flash twrp recovery with autorec apk at my g2 ls980,but i flashed wrong d802's twrp recovery,then my ph show "fastboot mode started..." stucking at it,fastboot mode
well work,i can type fastboot
commond,now i m trying to go
back to stock firmware and
when i entering download
mode,my device doesn't detect
at my computer,i tried to flash laf.img,but when i join my ph in downloading mode,the device does not detect and appear in device manager.
Plz guide me,Sir!
Hi, thank you for using XDA Assist. I would flash the stock firmware and start the process all over. See this, http://forum.xda-developers.com/sprint-g2/general/how-to-restore-downgrade-install-t2863050. Also, if you have further questions see your device's specific fork here, http://forum.xda-developers.com/sprint-g2
Thread closed.
Related
Hah..I accidentally flashed recovery.img to boot. What to do. Now can't enter in adb/fastboot mode. Phone just restarts after phone logo appears. Is there any way I could get back to adb/fastboot mode. Thanks.
Hi there,
Please give us more details about your device.
Thanks
Micromax A63
R_a_z_v_a_n said:
Hi there,
Please give us more details about your device.
Thanks
Click to expand...
Click to collapse
My phone was stuck on bootloop and I wanted to install a new rom. When I tried to hard reset screen changed to that android logo for running process with error message 'Error : Mount /system'. Eversince I couldn't enter recovery mode again, all the time android logo comes up. Somehow I managed to get my phone on fastboot mode but accidentally fashe recovery to boot. Now couldn't enter fastboot mode either. It just restarts and go to that android logo.Phone is not rooted.
Hi
All you need is in this thread where you can ask directly:
Micromax A63 ||Development||Custom Roms||Recoveries||Tweaks||Disscussion||
Good luck
hello everyone
I have soft bricked my phone while flashing cm12.1 on my YU YUNIQUE YU4711
the problem is that i cant start my phone and neither i can go to the recovery of my phone
whenever i try to oprn the recovery it shows cyanogen fastboot mode...
now i was thinking that can i recover my phone using a nandroid backup that i created earlier using some softwares on my pc....
also when i try to flash anything on my smartphone using fastboot in cmd it shows waiting for device
so is there any way by which i can recover my phone....
Also tell me how to solve the waiting for device in fastboot
thanks in advance
bhaskar_22 said:
hello everyone
I have soft bricked my phone while flashing cm12.1 on my YU YUNIQUE YU4711
the problem is that i cant start my phone and neither i can go to the recovery of my phone
whenever i try to oprn the recovery it shows cyanogen fastboot mode...
now i was thinking that can i recover my phone using a nandroid backup that i created earlier using some softwares on my pc....
also when i try to flash anything on my smartphone using fastboot in cmd it shows waiting for device
so is there any way by which i can recover my phone....
Also tell me how to solve the waiting for device in fastboot
thanks in advance
Click to expand...
Click to collapse
Hello,
It seems that you've already posted your issue in the right section http://forum.xda-developers.com/showthread.php?p=64527817 and @Droidriven has already replied to you.Install the proper device drivers and the device will be detected in fastboot.For any further questions you can post in the Android Q&A Section.
Thread Closed!
___
v7
XDA Assist
I rooted my phone and it worked. But after trying to update it to the newest software, it restarted to the recovery mode. Whenever I try to reboot the phone it always boot me in the recovery mode. I tried flashing the stock ROM but I think the reason why it's not working is that the PC cannot recognize the phone. I've seen an article saying that, that it is caused by an instruction in the misc.img file that somehow doesn't get cleared when I'm trying to reboot the system. Please help. Thanks in advance
Hi,
Thanks for using XDA assist.
Please tell us what phone you are using so you can be directed to the appropriate forum.
gsstudios
I bought zte nubia z9 mini a week ago and it was in cncommon v1.16 rom i installed one click root and twrp recovery installer i flashed the Chinese rom from navin in xda site itself the after flashing that rom i wasn't able to boot into recovery and when i press vol up + power it only showed the Nubia logo and i wasn't able to install the twrp from the rom manager app ,twrp app and anything else, then i did factory reset from the phone itself . after that situation got worse. That is i can't reboot or access the recovery .i tried to flash roms from needrom website (v1.16) through cmd and it didn't worked i tried Nubia restoration tool but it always showed error i tried using qpst .my device is shown in device manager as qh -usb qloader 9008 i downloaded few roms and none of then didd not contained firehose,rawprogram.xml and patck0.xml.i downloaded these files from internet and tried to flash using qpst but it always shows sahara error . i can access the fastboot (vol down + power) from fastboot i can't acces anything down there .i tried to flash rom using fastboot and it showed successful in pc but phone is at it was .
The bottomline is i Hove a twrp backup and i want to restore it in my device .please help . thanks
Hello,
Welcome to XDA.
I think the thread linked below seems to deal with having the same issues you are having. Try posting your issue in that thread.
http://forum.xda-developers.com/android/help/zte-nubia-z9-mini-urgent-help-required-t3130991
Someone there may be able to help.
Register an XDA account to post and reply in the forums.
Hello guys !
I m having a yureka plus without cyanogen one , i rooted it by using kingroot & also further checked it by root checker app which confirmed that it was rooted.
After that i installed Rasher tool in my phone and downloaded twrp recovery.img from some random site then i used Rasher to simply change my cyanogen recovery to twrp but as soon as it got into bootloader it stuck there for really long......!
So i tried to hard reset it via cyanogen recovery but it won't open
It justs reopens the boot logo... !:crying::crying:
Pls guys help me out i don't know how to turn it back to normal....
I also don't know if its boot loader is unlocked or not
It doesn't responded anything in its fastboot mode while i was unlocking it via cmd prompt....
HELP GUYS PLS !
_Zeref_ said:
Hello guys !
I m having a yureka plus without cyanogen one , i rooted it by using kingroot & also further checked it by root checker app which confirmed that it was rooted.
After that i installed Rasher tool in my phone and downloaded twrp recovery.img from some random site then i used Rasher to simply change my cyanogen recovery to twrp but as soon as it got into bootloader it stuck there for really long......!
So i tried to hard reset it via cyanogen recovery but it won't open
It justs reopens the boot logo... !:crying::crying:
Pls guys help me out i don't know how to turn it back to normal....
I also don't know if its boot loader is unlocked or not
It doesn't responded anything in its fastboot mode while i was unlocking it via cmd prompt....
HELP GUYS PLS !
Click to expand...
Click to collapse
Hello,
Please try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.