Related
Hello!
I have already posted in a German Forum, I hope its okay that I post here as well, maybe somebody can help me here.
My Samsung Note 10.1 N8000 is stucked in a boot-loop, the last thing I did was installing Apex launcher and some widgets.
I just got the note 10.1 recently and so far I did not install any custom Roms, I don't have root access, nothing.I can access download and recovery mode and already tried "wipe cache partition".
My problem: I use the tablet mainly for drawing with AutodeskSketchbookPro, and I got some really important illustrations I just made the day before on the tablet. I am desperately trying to get access to those files before trying a ''wipe data/factory reset'' , stored in in the internal storage. :crying::crying: I don't care if messages or settings are lost.
I already read a lot about Odin, CWM and root access - I was told that maybe flashing a custom Rom won't delete those files, but all the ROMs I found so far require a full wipe before flashing. Maybe I could flash the Stock Rom with Odin?
Or is there any other way to access the files?
I would really appreciate any advice!!!! :crying::crying:
I would do anything to get those files back! :crying:
Thank you all in advance!!
melbe
Data on internal sd should not be deleted after a factory reset.
You can try to flash any ROM via Odin, first.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
AltairBW said:
Data on internal sd should not be deleted after a factory reset.
You can try to flash any ROM via Odin, first.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you so much!!!
I read that if I choose ''wipe data/factory reset" everything will be gone, except data on the external sd card.
But basically if I download the latest Stock Rom for 3 Hutchison for Austria it should be safe? Even though it might be a newer Version?
Unfortunately I wasn't able to check which firmware I originally had, but there are only 2 available for 3 Hutchison Austria (Its branded).
Thank you so much!
I done many wipes from recovery on my old Note 1, and never had any data from my internal sd card gone.
Yes, you're safe with it. Even if it's an older version, it doesn't matter.
Good luck.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
AltairBW said:
I done many wipes from recovery on my old Note 1, and never had any data from my internal sd card gone.
Yes, you're safe with it. Even if it's an older version, it doesn't matter.
Good luck.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Oh! So a wipe data/factory does not delete data on internal and external storage?
If I remember correctly, the data I'm looking for lies in a folder "Autodesk" in "sdstorage0" (or something like that), I will check that.
I know that there are different ways to reset the note 10.1. It would be perfect if the folder I'm looking is not lost with a wipe data/factory reset. :crying:
Thank you so much!!
I just got the information that on some new note and tabs (and on the note 10.1) the "wipe data/factory reset" does delete the data on the internal sd card
I will try to flash my original stock rom again!!
Thank you!!
Probably, you're right. They're many differences between the devices before the S3 (like the Note 1) and after it (like the N10.1).
I also think reflashing the rom is the best solution.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
AltairBW said:
Probably, you're right. They're many differences between the devices before the S3 (like the Note 1) and after it (like the N10.1).
I also think reflashing the rom is the best solution.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
A friend of mine just did a wipe data/factory reset on his note 10.1 - the data from the internal sd-card ist definitely lost
I will try to flash now...
I just flashed my stock rom with Odin, I got it from SamMobil. Seems it worked, but after rebooting its now stuck at the Samsung logo.:crying:
Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
AltairBW said:
Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you!!! I might try that :crying::crying:
Factory reset on stock recovery WILL DELETE ALL DATA! Try to install custom recovery via Odin, then factory reset in that, then you wont lose data on sd cards. Also odin back to stock deletes data as well. The reason you're stuck on samsung logo is it needs a factory reset in stock recovery, meaning you lose everything. What happens when you plug the device into windows? Can you access anything that way?
pre4speed said:
Factory reset on stock recovery WILL DELETE ALL DATA! Try to install custom recovery via Odin, then factory reset in that, then you wont lose data on sd cards. Also odin back to stock deletes data as well. The reason you're stuck on samsung logo is it needs a factory reset in stock recovery, meaning you lose everything. What happens when you plug the device into windows? Can you access anything that way?
Click to expand...
Click to collapse
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing
melbe said:
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing
Click to expand...
Click to collapse
Try a stock based custom rom just to see if you can boot long enough to access your files. Once you have them saved, then you can do anything. I believe darkman had a root injected stock rom in development. Try that.
melbe said:
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing
Click to expand...
Click to collapse
No you don't have to wipe .
That is to prevent problems .
I will consider flashing a custom rom today, maybe I can boot long enough to access the files
Otherwise I will try the tool AltairBW suggested.
Many thanks to all of you!!! :crying:
AltairBW said:
Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Hi everybody,
I'm very happen, I did it!!!!! :victory::victory::victory: I was able to save my entire files!!!! I'm so happy!!! :victory::victory::laugh:
In case somebody might encounter the same problem - - here is a short tut on how I did it:
First of all, install CWM Recovery only - here's a good Thread by Darkman on how to do it (see Post #1 and especially #2): How to ROOT Galaxy Note 10.1 3G/Wifi! [N8000/N8013/N8010]
root access is _not_ necessary!
Unfortunately "Aroma Filemanager" seems not to be compatible with the note 10.1 (works only devices with ARM NEON support, and I wasn't able to navigate in an old non-neon Version (v1.80)). But it seems to be a great tool and might work on other devices, so I'll attach the link anyway:[CWM-APP][1.91] AROMA Filemanager + TERMINAL :: 130903 :: Open Source
Next step, install ADB! Thats it! I can recommend this minimal Version here: [TOOL]Minimal ADB and Fastboot [7-18-13] Its not necessary to download the whole Android SDK!
With ADB installed, open the command line tool, go to the ADB folder and start ADB with:
Code:
adb
Then connect the Tablet while in CWM Recovery Mode. You should check if the device is connected by typing the following:
Code:
adb devices
Now you should be able to access and copy all your files from the internal storage to your Computer with the "pull" command! For example:
Code:
adb pull /sdcard/ /saved_sdcard
That way, your entire sdcard folder is copied to a local folder called "saved_sdcard". Of course you can copy only certain folders, in my case I backed up only the Autodesk folder, like that:
Code:
adb pull /sdcard/Autodesk/ /saved_autodesk
Thats it!!! Many thanky to all of you, I'm sooooo happy!! :victory::victory::victory: :highfive: :highfive: :highfive:
Thanks to this forum, all the useful threads and tools provided here, I was able to do it!! :victory:
Thank you al so much!! :highfive:
I hope this helps anybody who encounters the same problem!!
After I saved my files I did a wipe data/factory reset in CVM, and the bootloop was gone as well :laugh:
As the counter is +1 now I might consider to unroot it or flash a custom rom. But anyway the problem is solved!
Thanks again!!!!
:victory::victory::victory::victory:
i have that same problem but......
i have that same problem but i flash stock recovery & cwm recovery but i can not access to to recovery menu i press power+volume up but it still nothing blank screen and boot loop again any body can help me
Please guys help me . i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash it , it takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
If you have stock recovery try flash using adb and PC or terminal for android
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Dears,
Good Day,
I would like to know if I can install the beta L 5.1 on my MT7-TL10. Right now the current build is MT7-TL10V100R001C00B128
Thanks.
chudy_85 said:
If you have stock recovery try flash using adb and PC or terminal for android
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
Shouldn't ADB flashing work regardless of whether or not you currently have the stock recovery on your Mate 7? I use ADB to return from CWM to stock so I can install OTAs, without any issues thus far.
Please guys if any one has the stock recovery for the tl-10 version because every stock recovery if found is for the tl-09
As a Stock Recovery for the MT10 is there.
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
No my friend the stock recovery there works only for the tl-09
Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
Fooox1 said:
Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
Click to expand...
Click to collapse
Thank you my friend i will try it and tell you the result
Fooox1 said:
Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
Click to expand...
Click to collapse
Yes finally it worked i just had to flash it using fastboot now i can use ota updates again
Thank you so much fooox1
Sir, I believe we have the same model TL10. Can you give the steps you did to go back to custom recovery? Im on CWM and want to try the lollipop update.
Ali_adel_medo said:
Yes finally it worked i just had to flash it using fastboot now i can use ota updates again
Thank you so much fooox1
Click to expand...
Click to collapse
Easy Computer said:
Sir, I believe we have the same model TL10. Can you give the steps you did to go back to custom recovery? Im on CWM and want to try the lollipop update.
Click to expand...
Click to collapse
Ok my friend just follow these steps
1-download this tool http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
2-download this stock recovery for the tl-10 version https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
3-replace the recovery file you downloaded from step 2 with the one in the folder you downloaded in step 1
4-restart your phone to bootloader using volume down and power button then plug it to the computer using usb cable
5-go to the folder where you replaced the recovery file and press shift button and the right mouse button together and open a command window
6- just type these commands. fastboot flash recovery recovery_stock.img and press enter
Done. Now you are on stock recovery again
Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
[Android 7.0] [Nougat] Moto G4 Plus [XT1640/XT1641/XT1642/XT1643] NPJ25.93-11 TWRP BACKUP
REQUIREMENTS:
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1M...ew?usp=sharing
2. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/sho....php?t=2317790
3. Unlocked Bootloader = https://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
4. Twrp Recovery = https://forum.xda-developers.com/mo...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
5. Download the Moto G4 Plus NPJ25.93.11 TWRP BACKUP = https://drive.google.com/file/d/0Bx6eXSiwEdFFNEF3OTIyeERMdjQ/view?usp=sharing
METHOD:
1. Before proceding make sure your Bootloader is Unlocked and Twrp Recovery is Installed Guides are given above
2. Download the TWRP Backup link given above
3. Extract it and copy the file to you Internal Storage or SD card of your phone
4. Now reboot into recovery Click on restore chose your storage and Swipe To Restore
5. Wait for the process to finish and restart the device.
Then, the device will start with a new Bootanimation
NOTE:
1. Clear the Cache and Dalvik after restore for Setup
2. Before restoring its advised that you wipe the Dalvik , Cache , Data , System and Internal to Avoid Bugs.
HAPPY NEW YEAR START WITH ANDROID 7 OFFICIAL!
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
What is your device's version, or does it matter?
MK99 said:
What is your device's version, or does it matter?
Click to expand...
Click to collapse
It doesn't Matter.:good:
Is this will also replace recovery or there will be still twrp?
Wysłane z mojego Moto G4 przy użyciu Tapatalka
Has anyone tested? Does this version have root? Especially permanent root?
Seems to have worked like a charm. Thanks!
What about firmware? If I am currently running stock rooted Marshmallow, do I need to flash a different firmware beforehand, or just make a backup in TWRP, then give this a whirl?
Thanks,
Sent from my Moto G (4) using Tapatalk
myk.robinson said:
What about firmware? If I am currently running stock rooted Marshmallow, do I need to flash a different firmware beforehand, or just make a backup in TWRP, then give this a whirl?
Thanks,
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
I only made a backup in TWRP and then restored with this one. Everything seems to be working perfect so far.
How do you feel the update? It's better than marshmallow?
So I've extracted the backup and put onto my SD and internal storage, but when I boot into recovery to restore it cannot see a backup and therefore I cannot restore. Anyone have any thoughts as to where I'm going wrong?
Youssefous said:
So I've extracted the backup and put onto my SD and internal storage, but when I boot into recovery to restore it cannot see a backup and therefore I cannot restore. Anyone have any thoughts as to where I'm going wrong?
Click to expand...
Click to collapse
You have install TWRP recovery first to restore this update .:good:
cop1976 said:
Is this will also replace recovery or there will be still twrp?
Wysłane z mojego Moto G4 przy użyciu Tapatalka
Click to expand...
Click to collapse
No the TWRP recovery will still be there.
Waycloud said:
How do you feel the update? It's better than marshmallow?
Click to expand...
Click to collapse
I'm not noticing anything huge really. I was having some bugs in MM RR that seem to be fixed now.
Only notification sound and rooting method missing. All else working great.
Thanks!
(XT1642)
E: Also this rooting works fine.
https://forum.xda-developers.com/mo...t-how-to-root-n-firmware-npj25-93-11-t3532556
Working great on XT1641!
MK99 said:
Only notification sound and rooting method missing. All else working great.
Thanks!
(XT1642)
E: Also this rooting works fine.
https://forum.xda-developers.com/mo...t-how-to-root-n-firmware-npj25-93-11-t3532556
Click to expand...
Click to collapse
First of all rooting is not working fine because it is not permanent.
Secondly the notification issue is enough to make it NOT great. Combine that with lack of permanent root and I would say that it's actually sucky...
SoNic67 said:
First of all rooting is not working fine because it is not permanent.
Secondly the notification issue is enough to make it NOT great. Combine that with lack of permanent root and I would say that it's actually sucky...
Click to expand...
Click to collapse
Notification sounds are working on the XT1641
Backup Error in XT1643
Dear Sir,
When I restoring this file your RAR file does not appear So I changed this one to ZIP,But TWRP says ZIP signature verification failed
please resolve and Send me Backup please
Procedure
pLEASE gUIDE ME ONE BY ONE STEPS
Kareppa Pujeri said:
pLEASE gUIDE ME ONE BY ONE STEPS
Click to expand...
Click to collapse
Extract the RAR file and copy the twrp folder to your internal storage or SD card
after which Boot into TWRP recovery Click on restore and Choose this backup
This is a Backup file not a flashable file :good:
Help. I have destroyed my device. I have installed EMUI 5.0. Then I installed twrp 3.1.1. Everything was fine. Then I have flashed a wrong supersu file. Now I only get into the fastboot mode and the "erecovery". The TWRP 3.1.1 I can not flash. It means i can flash it with adb, but the device always boots into the system. My smartphone hangs in the bootloop. (After Honor logo it restarts again and again) What can I do? How can a go back to stock? Or flash twrp without booting the system after flashing twrp? Hope someone can help me
soulbreeder83 said:
Help. I have destroyed my device. I have installed EMUI 5.0. Then I installed twrp 3.1.1. Everything was fine. Then I have flashed a wrong supersu file. Now I only get into the fastboot mode and the "erecovery". The TWRP 3.1.1 I can not flash. It means i can flash it with adb, but the device always boots into the system. My smartphone hangs in the bootloop. (After Honor logo it restarts again and again) What can I do? How can a go back to stock? Or flash twrp without booting the system after flashing twrp? Hope someone can help me
Click to expand...
Click to collapse
Boot to erecovery, select the first option. It will download and install your stock firmware.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Boot to erecovery, select the first option. It will download and install your stock firmware.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thank you. I have tried to do this, but i getting "getting package info failed". i have tried with different wlan-connections.. is there a way to flash stock rom with adb? i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishind booting only see the start animation 15minutes. is there any way to go back to stock and start rooting again? thank you very much!
Rommco05 said:
so for enter to twrp : unplug your phone usb/charge and turn device off. So now, turn on with button combo: hold vol up + on/off, when u see blue scree honor, release on/off button but still continue holding vol+
Just to be sure...
Click to expand...
Click to collapse
Thank you. i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishing booting i only see the start animation 15minutes. is there any way to go back to stock and start rooting again? or can i flash stock (or pre-rooted) rom with adb? erecovery download does not working i get "getting package info failed". i have tried with different wlan-connections.. thank you very much!
soulbreeder83 said:
Thank you. I have tried to do this, but i getting "getting package info failed". i have tried with different wlan-connections.. is there a way to flash stock rom with adb? i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishind booting only see the start animation 15minutes. is there any way to go back to stock and start rooting again? thank you very much!
Click to expand...
Click to collapse
There is a way with ADB and fastboot. Download an appropriate firmware file for your mobile, then using Huawei Update Extractor, flash the image to their respective partitions.
Sent from my Honor 8 using XDA Labs
Fastboot is the best option for now
Rommco05 said:
Ok your model is? For now will be good to flash stock rom
Click to expand...
Click to collapse
My Model is FRD-L19 it's the Premium Version in Europe. i think... but i dont know how to do that. do you know a good guid? thank you very much! : )
adriansticoid said:
There is a way with ADB and fastboot. Download an appropriate firmware file for your mobile, then using Huawei Update Extractor, flash the image to their respective partitions.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thank you : ) now i am writting with two members about the same. maybe we should talk all three togheter?! i try to find a guid, how to flash it right way and the right firmware! : ) Thank you!!
yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )
soulbreeder83 said:
yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )
Click to expand...
Click to collapse
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.
soulbreeder83 said:
yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )
Click to expand...
Click to collapse
That's great, if I were you, I'll stick to stock for a little while
PalakMi said:
That's great, if I were you, I'll stick to stock for a little while
Click to expand...
Click to collapse
That's true, same as you.
PalakMi said:
That's great, if I were you, I'll stick to stock for a little while
Click to expand...
Click to collapse
Why? I am since 3 Years on rooted smartphones. I need root restore some root apps with titanium backup. I have rooted one time my honor 8 with no problems. If its thw same way to root it again on nougat (the same supersu and twrp version) it should be no problem)
Rommco05 said:
U find for yourself?
Click to expand...
Click to collapse
Found a manual on xda
adriansticoid said:
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.
Click to expand...
Click to collapse
Ok. Really? I mean something seen about different twrp and supersu version. I can need the same files, i used for marshmallow? - Now i have to find out what do you mean with "mount vendor" mount in twrp? With enabled mtp? Thank you!
soulbreeder83 said:
Ok. Really? I mean something seen about different twrp and supersu version. I can need the same files, i used for marshmallow? - Now i have to find out what do you mean with "mount vendor" mount in twrp? With enabled mtp? Thank you!
Click to expand...
Click to collapse
Flash TWRP from [url="https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1]HERE,[/url] then boot to recovery. You'll see an option there called Mount, click that and you'll see a checklist of mountable partitions. Just check on Vendor before you flash SuperSU.
soulbreeder83 said:
Why? I am since 3 Years on rooted smartphones. I need root restore some root apps with titanium backup. I have rooted one time my honor 8 with no problems. If its thw same way to root it again on nougat (the same supersu and twrp version) it should be no problem)
Click to expand...
Click to collapse
Yeah me too I have been on rooted and ROMd phones since a lot of time, but I do miss stock from time to time
PalakMi said:
Yeah me too I have been on rooted and ROMd phones since a lot of time, but I do miss stock from time to time
Click to expand...
Click to collapse
i wanna have stock, but rooted... and now i have the next problem... damn... think i go back to sony xD
soulbreeder83 said:
i wanna have stock, but rooted... and now i have the next problem... damn... think i go back to sony xD
Click to expand...
Click to collapse
Lol xD
adriansticoid said:
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.
Click to expand...
Click to collapse
and the next problem!! ( is this normal on a huawei device? I have done the update. But its very buggy i think. no keyboard inside only google voice... slow.. and cant open update programm! i am on
Build-Number: FRD-L19C900B300 - EMUI-VERION: 5.0 - ANDROID-VERSION: 7.0
and now i do not now how to go back to 6.0 - i have downloaded de downgrade update.app vom hihonor and flashed it with stock recovery... but i am still on 7.0 -.- can you say me how i can flash now 6.0? maybe with adb?
thank you for your support!
Elephone U pro to treble resurrection remix laptapper mod android 8.1
Bluetooth and safetynet working!
All runs smoothly and everything what I´ve tested has worked.
If you find bugs, share them here and may be we can develop all together.
I´m not responsible for your phone, all what you do is on your own risk
Backup your data
if you´ve got booting problems after all then flash eragon10.3 via qfil
GAPPS included!
Best configuration menu ever, have a look to the attached picture
flashing guide:
Recommended is to make a full wipe of system, data, dalvik and via twrp factory wipe.
Flash via adb.
1. Copy img file in folder adb.
2. start bootloader
3. run in windows cmd with
fastboot flash boot V10_TWRP.img (if you didn´t have twrp)
fastboot flash system rrmodsystem.img
ignore messages, give time and you´ll see the progress, after finished wait some seconds and then follow next steps.
4. restart to recovery
5. flash magisk 17.1 zip via TWRP after flashing twrp and system
6. wipe dalvik and cache manually with TWRP file manager in folder dat\cache and dalvik
7. reboot system
8. If you want then you can flash extrasflashtwrp via twrp. Try and be happy
9. enjoy
Safetynet:
To get magisk safetynet working you have to install magsk module MagiskHide Props Config and set in magisk configuration magisk hide, reboot and then
Run a terminal app and type:
1) su
2) props
3) Set the fingerprint with the following keys (pressing enter after each):
1 -> f -> 16 -> 8 -> y -> y
take xiaomi Mi A1 (it´s working for my u pro so it should be also ok for you.
MTP:
MTP works, but you have to go to developer settings usb and switch from mtp to ptp and back. May be sometimes you have to switch 2 or 3 times.
files:
https://drive.google.com/drive/folders/1JcJDP1d7gE_plJzEQLgxZzHJxK4Zn3m0?usp=sharing
I´m new at development and so I didn´t know all......May be someone can help how to update the google security patches?
May someone knows how to update the RR files in the future easily.......
May be there is a permanent possibility for phone security fingerprint and not over magisk module.....
Let´s develop together!
Big thanks to:
@skeleton1911
xda search function
RR team
baltiapps
all xda developers
Easy install
Prerequisits: bootloader unlocked, rooted, TWRP installed. Of course it is only for u pro!
This procedure should be work on every u pro:
1. start twrp and make a full backup to sd card
2. check your sd card, you must have a folder twrp with subfolder backups and ssubfolder with your phone modell like A208DD.....
3. download the rr_mod... zip and extract it to your modell sub folder (it should be only one path with the backup files)
4. start twrp and click wipe, factory reset, and again to wipe but advanced wipe check box dalvik, system,data, internal storage. After this click restore in the main twrp menu, choose sd card and you´ll see the rrmod backup. choose system, vendor and boot to restore.
5. After restore reboot recovery again and install magisk 17.1
6. at least go to advanced in twrp main menu and then file manager, goto data and delete cache folder and dalvik-cache folder completely.
7. Reboot system and enjoy
8. if all is working go to twrp again and if you want, install the rr_mod_extras and enjoy.:laugh:
Files:
https://drive.google.com/drive/folders/19VHoWsNMhW976JQhJCOGuyU9N3KP_r78?usp=sharing
If you wanna have safetynet working follow the steps above for safetynet.
Laptapper said:
Hi guys
Good news: I'm on oreo 8.1 with a modded RR resurrection remix rom with a lot of user adjustments and working gcam 5.2.025.
System is stable and all apps running good.
Bluetooth is working!
Playstore is working even with status not certified, but in case of this GPay isn't working.
Magisk ctsprofile false.
May we can develop together..... Any Ideas for the problems.
If I get some answers and or thanks with interested to release my mod then I could release it in some days.
Click to expand...
Click to collapse
Download link?
Inviato dal mio U_Pro utilizzando Tapatalk
Lukas2702 said:
Download link?
Inviato dal mio U_Pro utilizzando Tapatalk
Click to expand...
Click to collapse
It's not ready to upload.
I want only to upload if there are some useres interested, because of some hours to work.
Laptapper said:
It's not ready to upload.
I want only to upload if there are some useres interested, because of some hours to work.
Click to expand...
Click to collapse
If the problem is really only GPay and Magisk ctsprofile, I'll try it, because I always appreciated RR also on my old Jiayu S3!
Only one request: a guide step by step of installation procedure, because often adb commands on my upro not working.
Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Lukas2702 said:
If the problem is really only GPay and Magisk ctsprofile, I'll try it, because I always appreciated RR also on my old Jiayu S3!
Only one request: a guide step by step of installation procedure, because often adb commands on my upro not working.
Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Click to expand...
Click to collapse
Lot of hours...... Safetynet and gpay are working now
Laptapper said:
It's not ready to upload.
I want only to upload if there are some useres interested, because of some hours to work.[h/QUOTE]
Hi
you only share the rom if we help you develop it ?
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
Bradco said:
Laptapper said:
It's not ready to upload.
I want only to upload if there are some useres interested, because of some hours to work.[h/QUOTE]
Hi
you only share the rom if we help you develop it ?
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
No, I share it in case of some people are interested.
I had some problems to get a flashable img, but skeleton1911 helped me and now it seem to be possible.
I'll think today I'm sharing.
Click to expand...
Click to collapse
Bradco said:
Laptapper said:
It's not ready to upload.
I want only to upload if there are some useres interested, because of some hours to work.[h/QUOTE]
Hi
you only share the rom if we help you develop it ?
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
It's online see post 1
Click to expand...
Click to collapse
Laptapper said:
Bradco said:
It's online see post 1
Click to expand...
Click to collapse
Great new,
ok i understand and i am interested in your rom. skeleton leave us for the one ?. I try it as soon as I have time. for flash is like skeleton?
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
Bradco said:
Laptapper said:
Great new,
ok i understand and i am interested in your rom. skeleton leave us for the one ?. I try it as soon as I have time. for flash is like skeleton?
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
Principal yes, but follow my flashing guide
Click to expand...
Click to collapse
Laptapper said:
Bradco said:
Principal yes, but follow my flashing guide
Click to expand...
Click to collapse
Lillte question how start bootloader ?
I'm on eragon 10.3
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
I'll give it try tomorrow, thanks.
Sent from my MI 8 using XDA Labs
Bradco said:
Laptapper said:
Lillte question how start bootloader ?
I'm on eragon 10.3
Sent from my U_Pro using XDA Labs
Click to expand...
Click to collapse
Start the eragon app choose bootloader or switch your phone off and hold power + volume down untill the green led light appears , then immediately only pressing further volume down until you see bootloader.
Click to expand...
Click to collapse
Who has tried my ROM?
I think it's a very good ROM, I use it as daily driver....
Also power consumption seems to be very less....
Did not boot only eie screen.
powergo said:
Did not boot only eie screen.
Click to expand...
Click to collapse
TWRP installed and magisk zip 17.1 reinstalled?
Clean install with wiping system, data, internal memory?
I've installed like this a couple of times without problems.
Hi @Laptapper, after I flash twrp and rr, how I can copy magisk.zip on phone to flash in recovery? Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Lukas2702 said:
Hi @Laptapper, after I flash twrp and rr, how I can copy magisk.zip on phone to flash in recovery? Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Click to expand...
Click to collapse
Download with pc an save Via card reader to micro sd and insert in the phone.
@Laptapper when I give "C:\adb>fastboot flash system rrmodsystem.img", I have
"error: cannot load 'rrmodsystem.img'".
What's the problem??
Lukas2702 said:
@Laptapper when I give "C:\adb>fastboot flash system rrmodsystem.img", I have
"error: cannot load 'rrmodsystem.img'".
What's the problem??
Click to expand...
Click to collapse
Someone over on XDA also mentioned that this issue is to do with device encryption and that erasing and formatting the data partition would help (this will wipe all your data). This doesn't quite seem to link up but you never know...
On which ROM you are before, unlocked bootloader?
The developer options with usb debugging are on?
You've started the phone in bootloader?
Clean install with factory reset, wiped system wiped cache wiped data wiped internal memory?
The rrmodsystem.img is saved in adb folder, and you've started the cmd in adb folder?
You can try also to rename the rrmodsystem.img to system and fastboot flash system system.img,also it should be possible to flash eragon 10.3 via qfil and before iverwrite the eragon system.img with the system. Img of rrmod.
Before you've asked how to get magisk after flashing twrp and rrmod, so it sounds like that you've flashed rrmod before otherwise you had the possibility to download the magisk with the phone?
After the error appears you have waited some minutes or you disconnect the phone? Try to wait at least some minutes.