Database Info

[Solved] Suddenly Bootloop (No root or custom rom) :( Trying to access files!

Hello!
I have already posted in a German Forum, I hope its okay that I post here as well, maybe somebody can help me here.
My Samsung Note 10.1 N8000 is stucked in a boot-loop, the last thing I did was installing Apex launcher and some widgets.
I just got the note 10.1 recently and so far I did not install any custom Roms, I don't have root access, nothing.I can access download and recovery mode and already tried "wipe cache partition".
My problem: I use the tablet mainly for drawing with AutodeskSketchbookPro, and I got some really important illustrations I just made the day before on the tablet. I am desperately trying to get access to those files before trying a ''wipe data/factory reset'' , stored in in the internal storage. :crying::crying: I don't care if messages or settings are lost.
I already read a lot about Odin, CWM and root access - I was told that maybe flashing a custom Rom won't delete those files, but all the ROMs I found so far require a full wipe before flashing. Maybe I could flash the Stock Rom with Odin?
Or is there any other way to access the files?
I would really appreciate any advice!!!! :crying::crying:
I would do anything to get those files back! :crying:
Thank you all in advance!!
melbe

Data on internal sd should not be deleted after a factory reset.
You can try to flash any ROM via Odin, first.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka

AltairBW said:
Data on internal sd should not be deleted after a factory reset.
You can try to flash any ROM via Odin, first.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you so much!!!
I read that if I choose ''wipe data/factory reset" everything will be gone, except data on the external sd card.
But basically if I download the latest Stock Rom for 3 Hutchison for Austria it should be safe? Even though it might be a newer Version?
Unfortunately I wasn't able to check which firmware I originally had, but there are only 2 available for 3 Hutchison Austria (Its branded).
Thank you so much!

I done many wipes from recovery on my old Note 1, and never had any data from my internal sd card gone.
Yes, you're safe with it. Even if it's an older version, it doesn't matter.
Good luck.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka

AltairBW said:
I done many wipes from recovery on my old Note 1, and never had any data from my internal sd card gone.
Yes, you're safe with it. Even if it's an older version, it doesn't matter.
Good luck.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Oh! So a wipe data/factory does not delete data on internal and external storage?
If I remember correctly, the data I'm looking for lies in a folder "Autodesk" in "sdstorage0" (or something like that), I will check that.
I know that there are different ways to reset the note 10.1. It would be perfect if the folder I'm looking is not lost with a wipe data/factory reset. :crying:
Thank you so much!!

I just got the information that on some new note and tabs (and on the note 10.1) the "wipe data/factory reset" does delete the data on the internal sd card
I will try to flash my original stock rom again!!
Thank you!!

Probably, you're right. They're many differences between the devices before the S3 (like the Note 1) and after it (like the N10.1).
I also think reflashing the rom is the best solution.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka

AltairBW said:
Probably, you're right. They're many differences between the devices before the S3 (like the Note 1) and after it (like the N10.1).
I also think reflashing the rom is the best solution.
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
A friend of mine just did a wipe data/factory reset on his note 10.1 - the data from the internal sd-card ist definitely lost
I will try to flash now...

I just flashed my stock rom with Odin, I got it from SamMobil. Seems it worked, but after rebooting its now stuck at the Samsung logo.:crying:

Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka

AltairBW said:
Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you!!! I might try that :crying::crying:

Factory reset on stock recovery WILL DELETE ALL DATA! Try to install custom recovery via Odin, then factory reset in that, then you wont lose data on sd cards. Also odin back to stock deletes data as well. The reason you're stuck on samsung logo is it needs a factory reset in stock recovery, meaning you lose everything. What happens when you plug the device into windows? Can you access anything that way?

pre4speed said:
Factory reset on stock recovery WILL DELETE ALL DATA! Try to install custom recovery via Odin, then factory reset in that, then you wont lose data on sd cards. Also odin back to stock deletes data as well. The reason you're stuck on samsung logo is it needs a factory reset in stock recovery, meaning you lose everything. What happens when you plug the device into windows? Can you access anything that way?
Click to expand...
Click to collapse
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing

melbe said:
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing
Click to expand...
Click to collapse
Try a stock based custom rom just to see if you can boot long enough to access your files. Once you have them saved, then you can do anything. I believe darkman had a root injected stock rom in development. Try that.

melbe said:
Hi,
no, unfortunately I can't acess anything.:crying:
So far all Custom Roms I've found require full wipe before flashing
Click to expand...
Click to collapse
No you don't have to wipe .
That is to prevent problems .

I will consider flashing a custom rom today, maybe I can boot long enough to access the files
Otherwise I will try the tool AltairBW suggested.
Many thanks to all of you!!! :crying:
AltairBW said:
Not good :/
I have another idea: flash via Odin a custom recovery (CWM) then use this to copy your files to external sd: http://forum.xda-developers.com/showthread.php?t=1646108
After this, make a full wipe, flash a rom, root, remove the triangle, unroot
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Click to expand...
Click to collapse

Hi everybody,
I'm very happen, I did it!!!!! :victory::victory::victory: I was able to save my entire files!!!! I'm so happy!!! :victory::victory::laugh:
In case somebody might encounter the same problem - - here is a short tut on how I did it:
First of all, install CWM Recovery only - here's a good Thread by Darkman on how to do it (see Post #1 and especially #2): How to ROOT Galaxy Note 10.1 3G/Wifi! [N8000/N8013/N8010]
root access is _not_ necessary!
Unfortunately "Aroma Filemanager" seems not to be compatible with the note 10.1 (works only devices with ARM NEON support, and I wasn't able to navigate in an old non-neon Version (v1.80)). But it seems to be a great tool and might work on other devices, so I'll attach the link anyway:[CWM-APP][1.91] AROMA Filemanager + TERMINAL :: 130903 :: Open Source
Next step, install ADB! Thats it! I can recommend this minimal Version here: [TOOL]Minimal ADB and Fastboot [7-18-13] Its not necessary to download the whole Android SDK!
With ADB installed, open the command line tool, go to the ADB folder and start ADB with:
Code:
adb
Then connect the Tablet while in CWM Recovery Mode. You should check if the device is connected by typing the following:
Code:
adb devices
Now you should be able to access and copy all your files from the internal storage to your Computer with the "pull" command! For example:
Code:
adb pull /sdcard/ /saved_sdcard
That way, your entire sdcard folder is copied to a local folder called "saved_sdcard". Of course you can copy only certain folders, in my case I backed up only the Autodesk folder, like that:
Code:
adb pull /sdcard/Autodesk/ /saved_autodesk
Thats it!!! Many thanky to all of you, I'm sooooo happy!! :victory::victory::victory: :highfive: :highfive: :highfive:
Thanks to this forum, all the useful threads and tools provided here, I was able to do it!! :victory:
Thank you al so much!! :highfive:
I hope this helps anybody who encounters the same problem!!
After I saved my files I did a wipe data/factory reset in CVM, and the bootloop was gone as well :laugh:
As the counter is +1 now I might consider to unroot it or flash a custom rom. But anyway the problem is solved!
Thanks again!!!!
:victory::victory::victory::victory:

i have that same problem but......
i have that same problem but i flash stock recovery & cwm recovery but i can not access to to recovery menu i press power+volume up but it still nothing blank screen and boot loop again any body can help me

[Q] Stock recovery

Please guys help me . i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash it , it takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device

If you have stock recovery try flash using adb and PC or terminal for android
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka

Dears,
Good Day,
I would like to know if I can install the beta L 5.1 on my MT7-TL10. Right now the current build is MT7-TL10V100R001C00B128
Thanks.

chudy_85 said:
If you have stock recovery try flash using adb and PC or terminal for android
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
Shouldn't ADB flashing work regardless of whether or not you currently have the stock recovery on your Mate 7? I use ADB to return from CWM to stock so I can install OTAs, without any issues thus far.

Please guys if any one has the stock recovery for the tl-10 version because every stock recovery if found is for the tl-09

As a Stock Recovery for the MT10 is there.
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424

No my friend the stock recovery there works only for the tl-09

Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ

Fooox1 said:
Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
Click to expand...
Click to collapse
Thank you my friend i will try it and tell you the result

Fooox1 said:
Right. Had I forgotten. But still the original. Had it replaces only to the MT09.
Here the right.
https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
Click to expand...
Click to collapse
Yes finally it worked i just had to flash it using fastboot now i can use ota updates again
Thank you so much fooox1

Sir, I believe we have the same model TL10. Can you give the steps you did to go back to custom recovery? Im on CWM and want to try the lollipop update.
Ali_adel_medo said:
Yes finally it worked i just had to flash it using fastboot now i can use ota updates again
Thank you so much fooox1
Click to expand...
Click to collapse

Easy Computer said:
Sir, I believe we have the same model TL10. Can you give the steps you did to go back to custom recovery? Im on CWM and want to try the lollipop update.
Click to expand...
Click to collapse
Ok my friend just follow these steps
1-download this tool http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
2-download this stock recovery for the tl-10 version https://mega.co.nz/#!zRpgRYyZ!syKE3ok3HgaYiZtnlZ0iJJXWCLOrfAANtUP5iCl-APQ
3-replace the recovery file you downloaded from step 2 with the one in the folder you downloaded in step 1
4-restart your phone to bootloader using volume down and power button then plug it to the computer using usb cable
5-go to the folder where you replaced the recovery file and press shift button and the right mouse button together and open a command window
6- just type these commands. fastboot flash recovery recovery_stock.img and press enter
Done. Now you are on stock recovery again

CyanogenMod 12.1 for Desire 820n(single sim only)

Ported from YU YUREKA (Same hardware)
NOT FOR DUAL SIM (working on dual sim)
I'm not responsible for your bricked phone!
REQUIREMENTS:
HTC Desire 820n.
Unlocked bootloader.
custom recovery(TWRP).
ANDROID 5.0.2 NOT FOR KITKAT.(If interested in installing this rom, relock bootloader update to lolipop, unlock again and flash TWRP then follow)
Basic knowledge of what custom rom, custom recovery , unlocked bootloader and root are.
Wrong file uploaded. sorry guys. Mistakenly i deleted the correct file and uploaded the wrong file .My days of hard work gone.
I will try to make it soon again.
Download zip, place in sdcard.
Go to TWRP >wipe>advance wipe> select everything except external sdcard and swipe.
back.
Click install and select the zip and swipe.

Great Man!

Not flashing twrp recovery. Error
HTC Desire 820 cihazımdan Tapatalk kullanılarak gönderildi

And what are your opinions?
Is someone managed to install this rom?
Is this ROM google play?
Everything works fine? (The author did not write about it in the first post)
What about speed?
Perhaps the author himself, although answer?

kr1shna said:
Ported from YU YUREKA (Same hardware)
NOT FOR DUAL SIM (working on dual sim)
I'm not responsible for your bricked phone!
REQUIREMENTS:
HTC Desire 820n.
Unlocked bootloader.
custom recovery(TWRP).
ANDROID 5.0.2 NOT FOR KITKAT.(If interested in installing this rom, relock bootloader update to lolipop, unlock again and flash TWRP then follow)
Basic knowledge of what custom rom, custom recovery , unlocked bootloader and root are.
Wrong file uploaded. sorry guys. Mistakenly i deleted the correct file and uploaded the wrong file .My days of hard work gone.
I will try to make it soon again.
Download zip, place in sdcard.
Go to TWRP >wipe>advance wipe> select everything except external sdcard and swipe.
back.
Click install and select the zip and swipe.
Click to expand...
Click to collapse
Nice work. :good:
Edit the 1st post, describe the features and if possible....add some screenshot.

tomal said:
Nice work. :good:
Edit the 1st post, describe the features and if possible....add some screenshot.
Click to expand...
Click to collapse
Can't make to work. I got faild and error TWRP.
Someone flash this Rom successfully?

JohnnyBlack10 said:
Can't make to work. I got faild and error TWRP.
Someone flash this Rom successfully?
Click to expand...
Click to collapse
Great! Going sleep now. No CM12 for me.
Thank you for rasponse after 2 days.
Can you in the future check before posting ?
Yea, whatever , thank you!

Moderator Information,
Thread has been closed as there is no download link. To the OP, if you upload the ROM, please report the first post in this thread and include the download link. We can then re-open the thread for you.
Many thanks
Stephen

Phone only boots to eRecovery and Rescue mode with errors

Hi,
I have decided to open a thread to explain better my situation and make things more clear.
I first have unlocked bootloader and rooted my phone using this guide: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
After that I have decided to go back to locked and unrooted because I needed to upgrade from v6.0 EMUI4.1 to 7.0 EMUI 5 and I have:
downloaded "FullOTA-MF-PV" version "FRD-L09C432B381" from "FF" (but I think it was the wrong version for me) and put to my internal storage
downloaded and used "unSU" to unroot: https://forum.xda-developers.com/showpost.php?p=63615067
flashed "boot.img" and "recovery.img" that I have extracted with "HuaweiUpdateExtractor" from TWRP
now the phone always boot to eRecovery and there is nothing I can do.
I can't enter recovery.
When I shut it down the phone and connect it to cable to charge it, it boots to "Rescue" with the following text: "Error! Func NO : 10 (boot.img) Error NO : 2 (load failed)" (I think this is bad) and after some time it boots to eRecovery again.
I tried to press "VOL+ / VOL- / POWER" while connected to PC and it enters "Fastboot&Rescue" but my PC does not recognize it well, indeed when I run "adb devices" from CMD it does not show my phone, the list is empty.
Now I have got a SDCARD and I have downloaded "rollback package" from Huawei Honor site and "B131 firmware" and first put only rollback "dload" folder to my card. I have inserted the card to phone, shut it down and pressed "VOL+ / VOL- / POWER" but it is stuck at Honor start blue screen and nothing happens.
(my SDCARD is FAT formatted, is it ok or do I need to change it?)
Please, please I really need help with this. The phone is new and I don't want to loose it.
Thanks a lot.

Sorry guys, fortunately I have solved.
The problem was with rollback version, I have deleted it from sdcard and put the other "B131 firmware" "dload" folder and the forced update worked.
Now I'm back to 6.0 and EMUI 4.1 with firmware B131.
Now the important thing is to update to 7.0 and EMUI 5.0 (don't want to make the same mistake I made before).
After that I'm not sure whether I still want to unlock bootloader and root, but if I decide to do that what guide do I have to follow when coming from 7.0 EMUI 5.0?
What do you think about following these steps:
download TWRP from https://forum.xda-developers.com/honor-8/development/twrp-t3566563, enter fastboot and run
Code:
fastboot flash recovery twrp-3.1.1-0-frd.img
enter recovery and flash Magisk v12 (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
will it be enough or do I have to unlock run
Code:
fastboot oem unlock [insertnumberhere]
again with same number I used before to register to huawei site?

Rommco05 said:
Yes u must first unlock bootloader, yes same number
edit: for guide, xda have really good search system
Click to expand...
Click to collapse
Ok, I have done oem unlock againt and installed TWRP.
After that I have flashed Magisk v12 and now it boots only to eRecovery so it did not work with Magisk.
I made a TWRP backup for v7.0 and now I have restored it so it working againt but I need root.
Could I maybe try with old SuperSU "v2.76-20160630161323.zip" method as explained here: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946?
Or do you think it is better to try with newest SuperSU version?
It is weird the Magisk did not work.
Thanks

Supersu 2.79 dint gave bootloop for me on emui 5 . I hope it works for u too

Rommco05 said:
hm, I using Supersu 2.79 from https://forum.xda-developers.com/honor-8/development/twrp-t3566563 without any problem, so I can recommend to use Supersu. Just small think, Google play want to update this Supersu (update is unsucessful) but I just disabled notification from for Supersu and all my stuff works
Click to expand...
Click to collapse
great it works thank you very much.
Just one thing: I want to restore all apps from a Titanium Backup folder. I have just copied it to H8 and selected that folder from TB 8.0.1 but it just hangs at 0%. I also tried to install it as a system app but no luck.
Do you know anything about that?
Now I'm trying to make a update.zip backup file with all apps and data from my old phone and I will try to restore in H8. Hope it works.
Thanks

Lorog said:
great it works thank you very much.
Just one thing: I want to restore all apps from a Titanium Backup folder. I have just copied it to H8 and selected that folder from TB 8.0.1 but it just hangs at 0%. I also tried to install it as a system app but no luck.
Do you know anything about that?
Now I'm trying to make a update.zip backup file with all apps and data from my old phone and I will try to restore in H8. Hope it works.
Thanks
Click to expand...
Click to collapse
Using titanium backup will result in bootloop
And from an old phone it never works. Dont go for it.

gopinaidu77 said:
Using titanium backup will result in bootloop
And from an old phone it never works. Dont go for it.
Click to expand...
Click to collapse
wow I did not know that.
When I switched from my old Samsung Galaxy to HTC One I use it without problem, just copied the folder with all apps and data from one phone to other and restored backups.
Why does it not work in this case with H8?

Lorog said:
wow I did not know that.
When I switched from my old Samsung Galaxy to HTC One I use it without problem, just copied the folder with all apps and data from one phone to other and restored backups.
Why does it not work in this case with H8?
Click to expand...
Click to collapse
From marshmallow , things had gone worse . U cannot use tb to restore apps . Doing so will result in bootloop

gopinaidu77 said:
From marshmallow , things had gone worse . U cannot use tb to restore apps . Doing so will result in bootloop
Click to expand...
Click to collapse
Oh ok bad thing .
Well I will reinstall all my apps then, it will take a long time to reset all my settings.

Lorog said:
Oh ok bad thing .
Well I will reinstall all my apps then, it will take a long time to reset all my settings.
Click to expand...
Click to collapse
Its better u install .
I used to build various roms , i take a nandroid backup first . Test each rom one after the other and then restore the backup.
Sometimes if i find a rom much stable than the one i used before , i will stick to it and reinstall all the apps . Happens once in two days for me .
Kindly dont go with titanium backup as it access encrypted data partition which will result in bootloop

gopinaidu77 said:
From marshmallow , things had gone worse . U cannot use tb to restore apps . Doing so will result in bootloop
Click to expand...
Click to collapse
Bro I can restore using TB in Nougat ROMs.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
Bro I can restore using TB in Nougat ROMs.
Click to expand...
Click to collapse
It i found it Caused bootloop for many people ! Are u using a custom rom ?

gopinaidu77 said:
It i found it Caused bootloop for many people ! Are u using a custom rom ?
Click to expand...
Click to collapse
Yes. RR. :laugh:
Sent from my Honor 8 using XDA Labs

adriansticoid said:
Yes. RR. :laugh:
Click to expand...
Click to collapse
And even in my aicp rom which i build

gopinaidu77 said:
And even in my aicp rom which i build
Click to expand...
Click to collapse
That's weird. I never had problems restoring with TB.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
That's weird. I never had problems restoring with TB.
Click to expand...
Click to collapse
How about in stock rom ? I think this thread is getting messedup .

gopinaidu77 said:
How about in stock rom ? I think this thread is getting messedup .
Click to expand...
Click to collapse
Never tried TB with stock.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
Never tried TB with stock.
Click to expand...
Click to collapse
It kill the phone due to encryption . U cannot restore tb backup on stock rom

gopinaidu77 said:
It kill the phone due to encryption . U cannot restore tb backup on stock rom
Click to expand...
Click to collapse
Oh. That's why. I don't use encryption anyway.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
Oh. That's why. I don't use encryption anyway.
Click to expand...
Click to collapse
But in honor 8 it is enabled by default

[RECOVERY] Unofficial TWRP 3.2.1-0 with Option EFS BACKUP

Unofficial TWRP 3.2.1-0 with option EFS BACKUP​
Hello everyone,
As all know, always is good have a backup of IMEI, sometimes lost our IMEI when changed rom or similar process.
Thinking that, i asked for my friend Junior Passos for to do a recovery that had the option for backup fold EFS(Backup IMEI).
He answered my request and is here below :
goo.gl/Js13sW
I tested and worked correctly.
Mod made by Junior Passos
Thank you very much!!
By Xicalau(Tiago1966)

Hello, I'm using TWRP 3.2.1, for me to upgrade to this version that you made available, could I upgrade by the same TWRP? Using Flash image option? Thanks, Great job!

marcelo_jake19 said:
Hello, I'm using TWRP 3.2.1, for me to upgrade to this version that you made available, could I upgrade by the same TWRP? Using Flash image option? Thanks, Great job!
Click to expand...
Click to collapse
Hi, Marcelo.
You can install this trwp using the recovey, just select img and choose de file, and flash the new trwp.
Thank you

Just stupid question - this recovery is 64-bit insn't it ?

sebx_g1 said:
Just stupid question - this recovery is 64-bit insn't it ?
Click to expand...
Click to collapse
This version is based on the last recovery from Alberto.

tiago1966 said:
Hi, Marcelo.
You can install this trwp using the recovey, just select img and choose de file, and flash the new trwp.
Thank you
Click to expand...
Click to collapse
Okay, Thanks!

Backup restore failed for me - system partition and modem set read only and restore not complete [emoji849]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka

Image not signed or corrupt

sadly it's always stuck on 3% on backing up system. So sadly useless