Flashin G920P firmware on G920I for FM Radio Activation - Galaxy S6 Q&A, Help & Troubleshooting

Can the FM chip inside the regular international variant of S6 be activated by flashing the Sprint Firmware using the modified Prince Comsy's Odin?
I know the modded Odin can flash cross region firmwares, and that Spint S6s have the chip activated by Sprint and it works with Next Radio App.

arneldna said:
Can the FM chip inside the regular international variant of S6 be activated by flashing the Sprint Firmware using the modified Prince Comsy's Odin?
I know the modded Odin can flash cross region firmwares, and that Spint S6s have the chip activated by Sprint and it works with Next Radio App.
Click to expand...
Click to collapse
You have literally nothing to lose by trying it. If it doesn't work just go back.

godkingofcanada said:
You have literally nothing to lose by trying it. If it doesn't work just go back.
Click to expand...
Click to collapse
I will give it a try this weekend. I read somewhere that Comsy's Odin only supports Snapdragon devices, hope that's not the case, S6 never had a SD variant.

arneldna said:
I will give it a try this weekend. I read somewhere that Comsy's Odin only supports Snapdragon devices, hope that's not the case, S6 never had a SD variant.
Click to expand...
Click to collapse
I don't suppose that it's too hard to add dependencies into Odin to work with Exynos if it is the case. Most Odin works with it. I use Odin on my s6 e+

godkingofcanada said:
I don't suppose that it's too hard to add dependencies into Odin to work with Exynos if it is the case. Most Odin works with it. I use Odin on my s6 e+
Click to expand...
Click to collapse
Did you use Comsy's Odin on your S6 E+?

Yeah I did, however just because it worked with my s6e+ doesn't mean it will work with s6, not the same hardware. If it doesn't you may be able to make it work by moving the necessary files from a different Odin version and then adding to its code to call those files. But that's a bit more programmer and a bit less end user. Tho I can probably help you there if that's the only alternative

Appreciate... but it failed to work, it threw an error "Secure check failed: bootloader" something like that and then I did a nand restore. Apparently, the G920P has a different bootloader that doesn't work on other variants. any advice?

Related

Weak cellular signal on g9035 in USA

Hello guys!
I live in the states and I get weak cellular signals most of the time. I have the exynos variant because i heard it has better ram management and battery. I have flashed the bootloader and modem BL_G930FXXU1BPIF and CP_G930FXXU1BPHJ and installed superman rom on it. I also flashed the csc for TMB because i use tmobile. So the problem is that I dont get good lte speed and the cellular signal is always low. Can i flash G930T modem on the exynos version or it will cause problem because G930T is the snapdragon variant?
Any help is appreciated!
breakwaterr said:
Hello guys!
I live in the states and I get weak cellular signals most of the time. I have the exynos variant because i heard it has better ram management and battery. I have flashed the bootloader and modem BL_G930FXXU1BPIF and CP_G930FXXU1BPHJ and installed superman rom on it. I also flashed the csc for TMB because i use tmobile. So the problem is that I dont get good lte speed and the cellular signal is always low. Can i flash G930T modem on the exynos version or it will cause problem because G930T is the snapdragon variant?
Any help is appreciated!
Click to expand...
Click to collapse
I think it is only the bootloader that you have to be careful with. Try the modem - you can always ODIN back the CP above if you have issues.
PS - try this new CP/modem module - it has the new TMo LTE-A in it - over doubled my download speeds:
https://www.dropbox.com/s/gazniujau...5_REV02_user_low_ship_MULTI_CERT.tar.md5?dl=0
gaww said:
I think it is only the bootloader that you have to be careful with. Try the modem - you can always ODIN back the CP above if you have issues.
PS - try this new CP/modem module - it has the new TMo LTE-A in it - over doubled my download speeds:
https://www.dropbox.com/s/gazniujau...5_REV02_user_low_ship_MULTI_CERT.tar.md5?dl=0
Click to expand...
Click to collapse
I tried to flash the modem you have provided but it keeps on failing through odin.
breakwaterr said:
I tried to flash the modem you have provided but it keeps on failing through odin.
Click to expand...
Click to collapse
Come to think of it the modem may also be hardware specific, so the qualcom one will not go on your 930F.
I would search the threads here and in the US TMo threads to see which phone firmwares (by country) are working best over here on 930F/935F(I have seen some when I was considering getting a 935F or FD), and then download the full firmware and extract the CP from the one that works good and ODIN it.
gaww said:
Come to think of it the modem may also be hardware specific, so the qualcom one will not go on your 930F.
I would search the threads here and in the US TMo threads to see which phone firmwares (by country) are working best over here on 930F/935F(I have seen some when I was considering getting a 935F or FD), and then download the full firmware and extract the CP from the one that works good and ODIN it.
Click to expand...
Click to collapse
some ppl are saying that to flash UK firmware to get better lte and reception but I am using UK's modem which is G930FXXU1BPHJ according to sammobile
breakwaterr said:
some ppl are saying that to flash UK firmware to get better lte and reception but I am using UK's modem which is G930FXXU1BPHJ according to sammobile
Click to expand...
Click to collapse
Maybe you need to install the whole firmware.
gaww said:
Maybe you need to install the whole firmware.
Click to expand...
Click to collapse
I just flashed the modem and still the same result. Maybe coverage here in lubbock, tx is just bad.

Possible to convert flash SM-G930U firmware on a SM-930P?

Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
theevilpotato said:
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
Click to expand...
Click to collapse
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
dylanneve1 said:
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
Click to expand...
Click to collapse
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
SM-G930P
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Barniedjfuze said:
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Click to expand...
Click to collapse
Yes it will, i am in belize with the U firmware and hotspot works great.
i was not able to to flash u firmware of s7 in sprint model g930p can any one help?
i use odin, u firmware of os 7 ,from sammobile,,, using odin i flash it ,, can any one help
pls help
SM-G930P converted to SM-G930U
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?​
Barniedjfuze said:
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?​
Click to expand...
Click to collapse
Did you flash all file in the SM-G930U folder (AP,BL,CSC,CP)? Because i did it with T-mobile,Verzion an it work fine
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Barniedjfuze said:
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Click to expand...
Click to collapse
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
CSC flashing
ZaKaRia OuH said:
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
Click to expand...
Click to collapse
Hey Buddy. I would recommend doing a full back up on your phone., using Smart Switch app
It saves all your numbers, message, etc..
Then proceed to flash the latest firmware for the Region or Provider. Using (CSC) not (home_csc) which means flashing the csc will wipe your phone data. Phone will be like new again. Proceed tru set up. Loggin in gmail. Proceed to update smart switch app if not found in apps. Then restore from the back up file. And good to go.
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
highhacker said:
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
Click to expand...
Click to collapse
He said all S7's in the USA are the same, which is correct. Exynos/930F isn't sold in the US, only way to get one is to grey import.
You can flash any USA model's firmware onto any other USA model because they're all the same hardware.
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
killerherts said:
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
Click to expand...
Click to collapse
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
quasihellfish said:
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
Click to expand...
Click to collapse
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Removed
killerherts said:
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Click to expand...
Click to collapse
Blame Sprint; there is really no reason for them to do what they did except keep users from switching their phone to another carrier. This isn't a Samsung thing. I don't believe you would be able to do this with any other Android phone, either (i.e. go backwards in bootloader versions).

Hello Guys,,I accidentally Flashed G930T Firmware On My G930F Phone

Yesterday I Bought G930F Device Working Great And Officially G930F Then I Flashed G930T Firmware by accident
And G930T bootloader is locked i can't flash G930F firmware
What Should I do???I tried to intitialize Device With Smart Switch But It says device not supported
I have Rooted G930T 7.0 Noughat and i would like to go back to my G930F 7.0
Any Idea?
So you didn't hard brick your device? I thought the G930F was Exynos and any US firmware would kill it. I'm not too sure if this will work but have you tried using Flashfire to go back to the G930F firmware?
LeTurntRice said:
So you didn't hard brick your device? I thought the G930F was Exynos and any US firmware would kill it. I'm not too sure if this will work but have you tried using Flashfire to go back to the G930F firmware?
Click to expand...
Click to collapse
No I didn't hard brick my phone but the bootloader changed completely to US and I Can't Do Anything to go back with odin
and with flashfire i can't flash bootloader it says partition protected
i tried to flash G930F System With flashfire but ended up with no samsung logo
i tried smart switch to intialize device with my model name and serial number that written on back of my device but it says
(The Model Information That You Have Entered Cannot Be Verified;The Device Initialization Cannnot Procced Please Contact The Service Center)
So Smart Switch Didn't Work,,FlashFire Didn't Work,,,Odin Not,,,I Guess I Should Contact The Service Center
And I'm In Kurdistan,Iraq So No Service Center In My Country
Any Way To Flash A G930F Bootloader without Any Problem??Because My Device Is Exynos And It Should Be A Reason For Success
This Is Insane Right?
Have you tried the prince comsy version of Odin?
LeTurntRice said:
Have you tried the prince comsy version of Odin?
Click to expand...
Click to collapse
try what?
i tried to flash G930F bootloader with princecomsy odin but no luck
Okay so are you 100% positive your device is G930F and not U? Because I don't think your phone should even be booting if you flashed a Snapdragon firmware on an Exynos phone.
LeTurntRice said:
Okay so are you 100% positive your device is G930F and not U? Because I don't think your phone should even be booting if you flashed a Snapdragon firmware on an Exynos phone.
Click to expand...
Click to collapse
Yes Because Before I Flashed G930T Firmware I Tested Geekbench And It Was Exynos 8890 Octa
And Other Applications That I have Tested It Was Exynos 8890 Octa
And On My Back Of My Device Serial Number And Model Name Is Good
I'm %100 Positive That My Device Is G930F Because Before I Flash G930T Firmware The Bootloader Was G930F
And Beside All Of That On The New G930T Firmware I Feel That My Device A Little Laggy And Not Running The System Perfectly
Maybe you could find the latest F update.zip and flash it through recovery?
LeTurntRice said:
Maybe you could find the latest F update.zip and flash it through recovery?
Click to expand...
Click to collapse
through Stock G930T Recovery?
Worth a shot? I mean it might brick your phone but if you really need F it might be your only option at this point.
LeTurntRice said:
Worth a shot? I mean it might brick your phone but if you really need F it might be your only option at this point.
Click to expand...
Click to collapse
I will Think About It
And I will Tell You The Results Soon
Thanks For Helping me
LeTurntRice said:
Worth a shot? I mean it might brick your phone but if you really need F it might be your only option at this point.
Click to expand...
Click to collapse
And Where Can I Find That Update.Zip
LeTurntRice said:
Worth a shot? I mean it might brick your phone but if you really need F it might be your only option at this point.
Click to expand...
Click to collapse
Where Can I Find Update.zip
alandxaled said:
Where Can I Find Update.zip
Click to expand...
Click to collapse
Sorry for not responding but I'd try searching for G930F update.zip.

What is the difference between the G955U and the G955U1?

I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
G955U is USA carrier locked and G955U1 USA Unlocked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
Sorry for the noob question does this mean I can install G955U1 USA Unlocked firmware on my G955U carrier locked without any issues
turboedm said:
I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
Click to expand...
Click to collapse
Simply put. There is no bloat. You'll get all the features samsung intended on their phones. You won't get features from carrier phones.
but in G955U1 the bootloader is locked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
I have been asking a lot about this myself. i am on tmobile. not sure if i want to make the leap to unlocked. want to keep visual voicemail, wifi calling, rcs support and what not. but i want to get in on the beta for pie. running drl7 now but the video bug with netflix and what not is annoying.
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
TheMadScientist said:
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
Click to expand...
Click to collapse
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
Your not god
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
RangerVegas said:
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
Click to expand...
Click to collapse
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
TheMadScientist said:
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
Click to expand...
Click to collapse
Ok thanks for the info. So apparently right now it's just a bit too early to be trying to find a Pie ROM that would work with my phone and not loose some hardware features. Which I guess makes sense since Samsung is only just now releasing it for S9's I believe in european countries I guess primarily to make sure how they borked it with their own software and tweaking didn't totally screw up their phones. Heh.
Oddly enough I got all excited when I saw it said there was an update today, but all it was for was a security update to bring it up to "Feb 1st, 2019" Android security level.
Thanks for the info about things. :good:
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
YES you can Flash back to ATT U. I have done it.
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
T0nyCr said:
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
Click to expand...
Click to collapse
Nope... none problem... everything ok:good:
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
folusmile said:
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
Click to expand...
Click to collapse
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
Thanks
---------- Post added at 08:51 AM ---------- Previous post was at 08:50 AM ----------
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
I want to flash pie can I process?

Flashing galaxy note 5 n920v to n920c

HELLO GUYS..I USE AN UNLOCKED GALAXY NOTE 5 N920V IN GHANA. EVERYTHING WORKS FINE EXCEPT MY 4G LTE.
I HAD GALAXY A8 WITH UNITED ARAB EMIRATES ROM AND THIS GALAXY ALPHA TOO WITH ZAMBIA MTN ROM WHICH 4G LTE WORKED PERFECTLY. I WANT TO FLASH NOTE 5 N920C 7.0 STOCK OF EITHER REGIONS ON MY VERIZON NOTE 5 BUT IAM A BIT AFRAID BECAUSE OF THIS N920V LOCKED BOOTLOADER AND CANT BE ROOT BS...CAN I GO AHEAD OR I SHOULDNT.
bhenedikt said:
HELLO GUYS..I USE AN UNLOCKED GALAXY NOTE 5 N920V IN GHANA. EVERYTHING WORKS FINE EXCEPT MY 4G LTE.
I HAD GALAXY A8 WITH UNITED ARAB EMIRATES ROM AND THIS GALAXY ALPHA TOO WITH ZAMBIA MTN ROM WHICH 4G LTE WORKED PERFECTLY. I WANT TO FLASH NOTE 5 N920C 7.0 STOCK OF EITHER REGIONS ON MY VERIZON NOTE 5 BUT IAM A BIT AFRAID BECAUSE OF THIS N920V LOCKED BOOTLOADER AND CANT BE ROOT BS...CAN I GO AHEAD OR I SHOULDNT.
Click to expand...
Click to collapse
No, that would 100% lead to a brick. If you're looking for a way to bypass the locked bootloader in order to flash TWRP, give up on that idea. There is no way around the locked bootloader on Verizon Samsung devices, many people have tried many, many, many different things, everything and anything you can possibly think of and absolutely nothing works. Flashing stuff isn't going to change that.
Sent from my LGL84VL using Tapatalk
Droidriven said:
No, that would 100% lead to a brick. If you're looking for a way to bypass the locked bootloader in order to flash TWRP, give up on that idea. There is no way around the locked bootloader on Verizon Samsung devices, many people have tried many, many, many different things, everything and anything you can possibly think of and absolutely nothing works. Flashing stuff isn't going to change that.
Click to expand...
Click to collapse
Iam not trying to bypass the bootloader or flash twerp..
I just want to flash the n920c rom to get access to 4g lte..can i?
bhenedikt said:
Iam not trying to bypass the bootloader or flash twerp..
I just want to flash the n920c rom to get access to 4g lte..can i?
Click to expand...
Click to collapse
920v is a Verizon device, the Verizon stock firmware should have 4G LTE. What issues are you having? If you're on Verizon stock firmware and have a 4G LTE SIM inserted, you should be getting 4G service.
If you're using the device in a different country, you probably won't get the 4G working.
The only thing I can think of is, find out which 4G radio bands your service provider uses, them do some searching see which 920 firmware(s) support those 4G radio bands, then download the firmware and extract the modem.img from the firnware, then convert the modem.img into an Odin flashable .tar.md5 then flash the modem via Odin.
Sent from my LGL84VL using Tapatalk
Droidriven said:
920v is a Verizon device, the Verizon stock firmware should have 4G LTE. What issues are you having? If you're on Verizon stock firmware and have a 4G LTE SIM inserted, you should be getting 4G service.
If you're using the device in a different country, you probably won't get the 4G working.
The only thing I can think of is, find out which 4G radio bands your service provider uses, them do some searching see which 920 firmware(s) support those 4G radio bands, then download the firmware and extract the modem.img from the firnware, then convert the modem.img into an Odin flashable .tar.md5 then flash the modem via Odin.
Click to expand...
Click to collapse
The 4g lte dont work..so i will do what you said..thank you very much..will get back to you when done
bhenedikt said:
The 4g lte dont work..so i will do what you said..thank you very much..will get back to you when done
Click to expand...
Click to collapse
I did and it failed..
SECURE DOWNLOAD FAIL [RADIO]
I Tried flashing the whole N920C rom
SECURE DOWNLOAD FAIL [BOOTLOADER]
SO I RESETED THE PHONE..
NOW ALL MY SENSORS DONT WORK !!!!
DONT EVEN KNOW WHETHER ITS HARDWARE OR SOFTWARE
I FLASH THE STOCK VERIZON ROM AGAIN AGAIN STILL SENSORS NOT WORKING..:crying:...ANY HELLPPP????
Droidriven said:
920v is a Verizon device, the Verizon stock firmware should have 4G LTE. What issues are you having? If you're on Verizon stock firmware and have a 4G LTE SIM inserted, you should be getting 4G service.
If you're using the device in a different country, you probably won't get the 4G working.
The only thing I can think of is, find out which 4G radio bands your service provider uses, them do some searching see which 920 firmware(s) support those 4G radio bands, then download the firmware and extract the modem.img from the firnware, then convert the modem.img into an Odin flashable .tar.md5 then flash the modem via Odin.
Click to expand...
Click to collapse
It didnt work
bhenedikt said:
It didnt work
Click to expand...
Click to collapse
If flashing the original stock firmware does not fix the sensors, I don't know what to try from there.
Sent from my LGL84VL using Tapatalk
It didnt.all apps that depends on these sensors is kinda useless now
Droidriven said:
If flashing the original stock firmware does not fix the sensors, I don't know what to try from there.
Click to expand...
Click to collapse
Can it be fixed when the phone is opened??
Or can it (sensors) be replaced?? Cos i have a sprint note 5 with spoiled screen..was think i can exchange the SENSORS..really worried
bhenedikt said:
Can it be fixed when the phone is opened??
Or can it (sensors) be replaced?? Cos i have a sprint note 5 with spoiled screen..was think i can exchange the SENSORS..really worried
Click to expand...
Click to collapse
After flashing the stock firmware, have you tried booting to stock recovery and factory reset in recovery then wipe cache partition?
Check to verify that your IMEI still displays in system settings.
Sent from my LGL84VL using Tapatalk
Droidriven said:
After flashing the stock firmware, have you tried booting to stock recovery and factory reset in recovery then wipe cache partition?
Check to verify that your IMEI still displays in system settings.
Click to expand...
Click to collapse
Imei displays..everthing works except the sensors..
bhenedikt said:
Imei displays..everthing works except the sensors..
Click to expand...
Click to collapse
Boot to stock recovery? Factory reset in recovery? Wipe cache partition? Yes? No? Maybe?
Sent from my LGL84VL using Tapatalk
Take that phone back to basics. Hook it up to Kies and restore it back to factory OS, then go from there. Report back.
jayinc11 said:
Take that phone back to basics. Hook it up to Kies and restore it back to factory OS, then go from there. Report back.
Click to expand...
Click to collapse
They already flashed back to stock via Odin, it did nothing.
Sent from my LGL84VL using Tapatalk
I have done that, same result. Put it on Kies, phone revived. Can't really explain why kies worked where odin did not.
Droidriven said:
Boot to stock recovery? Factory reset in recovery? Wipe cache partition? Yes? No? Maybe?
Click to expand...
Click to collapse
I have ..didnt work
jayinc11 said:
Take that phone back to basics. Hook it up to Kies and restore it back to factory OS, then go from there. Report back.
Click to expand...
Click to collapse
Kies is telling me to use smart switch..
But smart seem not to have any restart feature

Categories

Resources