Database Info

WP7 Media Player reboots phone 100% of time

I am running
OS ver 7.10.8779.8
Firmware is 2250.21.51101.401 rev 002
radio ver 5.51.09.29_22.32.50.10U
Radio HW A.12.0D4
with Motorola S305 bluetooth headphone and without failure when ever I try a play list or shuffle all it will play one song, reboot resync head phone then I can play one other song before same process all over again.
2nd issue is when watching videos I can not use bluetooth headphone as it will not push audio though the motorolas it simply ignores the headphones, or if I try the A2DP reg fix it crashes my phone reboots and no musical audio from videos until I change it back. Why is this happening? It has done this on every version I have loaded since the rom beem released for my phone. I have even bought a 2nd HD2 and experienced the same exact problems. Any help on a solution would be greatly appreciated.

Lord_Harada said:
I am running
OS ver 7.10.8779.8
Firmware is 2250.21.51101.401 rev 002
radio ver 5.51.09.29_22.32.50.10U
Radio HW A.12.0D4
with Motorola S305 bluetooth headphone and without failure when ever I try a play list or shuffle all it will play one song, reboot resync head phone then I can play one other song before same process all over again.
2nd issue is when watching videos I can not use bluetooth headphone as it will not push audio though the motorolas it simply ignores the headphones, or if I try the A2DP reg fix it crashes my phone reboots and no musical audio from videos until I change it back. Why is this happening? It has done this on every version I have loaded since the rom beem released for my phone. I have even bought a 2nd HD2 and experienced the same exact problems. Any help on a solution would be greatly appreciated.
Click to expand...
Click to collapse
Too slow memory card can cause random booting.

I was random rebooting too:
1.I removed SD card.
2.I formatted my SD with my old Nokia N95 phone.
3.then I formatted my SD card with SDFormatter (FULL format not only QUICK)
4.I put the SD card in my phone and to turn it on, pushed the two volume buttons, and I kept them pushed while pressing the Power button.
5.then (
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
) I pressed the Down Volume button to confirm the Hard reset
And until now I haven't any random reboots.
Hope it will help you

HW8227L-3.3-SW0-1.9 Head Unit - Always cold boot

Hey, New here.
I bought a android head unit for my Mercedes, installed it fine, but there wherent any can-bus adapters with it, so I had to reroute the acc to the AC, so it gives out 12v on startup. That works perfectly, however, I am wondering why it cant be in standby mode for a wile, why it turns off? its ok that the ACC cable cuts the power to the screen, but I thought the direct line(BAT) would keep it alive and in standby.
Is there anyway to get around this?
Here is the link to the unit I bought: banggood.com/10_1-Inch-2-DIN-Android-7_1-WIFI-Car-Radio-GPS-Navigation-Audio-Stereo-Car-MP5-Player-p-1432315.html?rmmds=myaccout-bottom-alsolike__1&cur_warehouse=CN
Thanks for helping

Take a look into "extra settings" -> "Shutdown delay if ACC OFF". There you can set it to "Auto sleep".
After that the unit should be every time in standby mode. For me it works fine.

le_mi said:
Take a look into "extra settings" -> "Shutdown delay if ACC OFF". There you can set it to "Auto sleep".
After that the unit should be every time in standby mode. For me it works fine.
Click to expand...
Click to collapse
Thanks, but I cant find any "extra settings". Ive tried to use the car settings, factory settings etc, but nothing there either. And since its a MB, and the unit isnt "compatible" out of the box, the system dont have MB settings in the factory settings.
And one more thing, it is really slow. using google maps, apple music and the launcher at the same time, its horrible. it should be able to run those 3 things at once.

As I can see in the description of the seller it is a quad core with 2 gb ram. I had an unit like that too and it was really slow. This was the reason why I bought me a new px5 with 4gb ram and octa core. This is very fast.
Are you sure that you don't have an option called extra settings?
On my old PX3 which had the same conditions like yours there was the option available.
Can you post some pictures of your settings screen!?

YodaAlmighty said:
Hey, New here.
I bought a android head unit for my Mercedes, installed it fine, but there wherent any can-bus adapters with it, so I had to reroute the acc to the AC, so it gives out 12v on startup. That works perfectly, however, I am wondering why it cant be in standby mode for a wile, why it turns off? its ok that the ACC cable cuts the power to the screen, but I thought the direct line(BAT) would keep it alive and in standby.
Is there anyway to get around this?
Here is the link to the unit I bought: banggood.com/10_1-Inch-2-DIN-Android-7_1-WIFI-Car-Radio-GPS-Navigation-Audio-Stereo-Car-MP5-Player-p-1432315.html?rmmds=myaccout-bottom-alsolike__1&cur_warehouse=CN
Thanks for helping
Click to expand...
Click to collapse
same problem, mine is android 8 GO after just 12 second it powered in cold boot. does any one have a solution to this problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PX30 dongle locked down

Hi, maybe somebody can help me a bit, just hope I post in the right forum. I have a C5 wireless dongle with a PX30 (RK3326-S) chip. Problem is, device is working perfectly except, that Google Assistant voice is cut (navi and music works perfectly). I already was in contact with their support, they send me an APK to change the Output from Google Assistant from phone call to music, but also didn't help. By the way, that's was the only APK I could install, all others will fail, see below.
So I wanted to try to install Headunit reloaded but regardless if tried via Play Store or direct, installation fails. That's the same for every other programm I tried (app not installed, regardless if via Play Store or direct).
I then thought, give it a try to disable USB Audio routing in developer options, but it's not possible to enable developer options the standard way. I the read that using "adbon" in factory settings menu should maybe enable Developer options, but when using that, device restarts, but the screen of the car stays blank. When using the root command (*#hct#root#) gives just a "wrong password" error. When using m123456, I can at least enter the additional settings, but that doesn't help here.
So I really would like to have a ROM where I can install my own Apps on, so if somebody could point me in the right direction, it would be great. Following thinks to take into consideration from my point of view:
1. as it's just a Dongle, up to now I only can get a graphical output in the car itself
2. on current ROM not possible to install additional apps (the one I got from manufacture support was the only exception)
3. even if it's possible to install another ROM, as it's not a Head unit, but just a Dongle, I would also need he programms for mirroring to Car screen (also I'm not new to rooting etc, I have no clue about this Dongles) - is this included in the MCU?
This C5 device seems to be sold under different brands, see 2 links below, attached also 3 Fotos from the board and current Software.
https://herilary.com/pages/如何操作
https://www.amazon.de/Carplay-Funkt...TmFtZT1zcF9waG9uZV9zZWFyY2hfdGhlbWF0aWM&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

On-Board computer display

Hello, is there an app or a modification on the hardware to cap the connection to the original build in on board computer display? Most time it only show "other".
I would prefer to see the time and the day like when the radio is disconnected

Nobody knows what your unit is.
Post details from Android system information including MCU version.

Teh crickets (as usual)

Px5
Android 8.0.0
Kernel 4.4.93+
Hal9k Mod v3.1
eng.hct.20181210.171007
MTCE_XRC_V3.01_1
Sorry, took me some time to update

And with the on-board computer display I intend this one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You have an opel. The picture is showing the onboard trip computer.
You want those values on the headunit?
Or you want the fm radio to appear to that screen?
If it is the latter then if you have attached the odb box that came with your unit you should be able to see fm info on the screen.
You will see other when on Bluetooth call or when you play from youtube or anothe application.
I have not understand clearly wwhat you want to do.
If it is the 1st you want to do then you need a Bluetooth or usb odb adapter and an application called torque. You wont get the trip computer values into the head unit but you will be able to configure torque to measure the same values more or less.

I see the FM radio when I listen to the radio, and I see "other" when I use streaming apps.
But it would be nice if we could exchange the "other" with something more usefull, like the title of the song, or, because I know its very comlicated to realize that, instead of displaying "other", showing the date would also be nicer.
With the original radio, when its turned off, the onboard computer show the date also.
My idea was to somehow block the information send to the onboard computer and automatically the onboard computer should display the date, as if the radio would be turned off.
Maybe its a stupid request but this "other" always on that screen bothers me...

You must ask for this to the dev of every app that display other.
The app should send the data for that to the canbus.

Every app, except for the build-in (radio, media player, bluetooth) show other.

Please read my above post again.
The dev of that every application has to fix his application to transmit the name of what is playing.
At least that is what I know.

Question Auto play music in car

Hi,
I've been trying to find a fix for this since October.
I have a P7P and I connect to my cars Bluetooth without issue. It's a 2014 BMW 3 series with pro navigation, the lot.
It connects, I can take and receive calls, stream music etc. Not an issue.
However, the only problem is that music will only start auto playing if I have recently opened up YouTube Music and played something. If I swipe up and close YTM, and reconnect to the car, it won't play.
If I exit the car whilst YTM was playing, and get back into the car in quick succession, it'll start playing automatically.
However, if I don't get back in the car and connect to Bluetooth and leave it a while, it won't auto play.
From the phones side, it is blindingly obvious that it is a background process issue that just doesn't remain active. My previous phone, a Huawei Mate 20 Pro never had an issue with this.
I have tried all battery optimisation options that indicate YTM is unrestricted, but nothing works. It just won't start auto playing music once Bluetooth connects. At the moment it's just fiddly getting into the car, waiting for Bluetooth to connect, then opening YTM and pressing play.
Does anybody have any ideas please?
Thanks.

You might try an automation app like MacroDroid or an old app like Tasker (I think I saw someone state they still have it working and doing things on our P7P/Android 13)...You could set things up, i imagine, that when it connects bluetooth and/or your car's bluetooth, to automatically load YTMusic and/or it press play after it loads...MacroDroid is very versatile...

I have same issue, looking forward for resolving

What is odd also is on pioneer head unit with wireless AA, it autoplays YouTube music no matter what for me. I'm on pixel 7 pro, and just wanted to add input for troubleshooting purposes.

This is handled by app. for example, in poweamp you can turn this on/off and both work flawlessly

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using this app and it handles it for me, opens the app and starts/stop playing.

I use MacroDroid to automatically open Pandora when I connect to my car or motorcycle BT.