Guys recently I updated my yunique from cm13 to lineage os 14.1
Steps followed
1. Download lineageos, gapps and caesium kernel and move to SD
2. Reboot in twrp and wipe data except internal
3. Install the above the zip files
Everything went smoothly without any error and device rebooted.
But after the lineage os animation ends the screen went blank and stays like that.
After sometime it restarts and displays boot animation again.
When I revert back to cm13 everything works fine.
Please provide suitable solution if possible. Thank u
Karthick0495 said:
Guys recently I updated my yunique from cm13 to lineage os 14.1
Steps followed
1. Download lineageos, gapps and caesium kernel and move to SD
2. Reboot in twrp and wipe data except internal
3. Install the above the zip files
Everything went smoothly without any error and device rebooted.
But after the lineage os animation ends the screen went blank and stays like that.
After sometime it restarts and displays boot animation again.
When I revert back to cm13 everything works fine.
Please provide suitable solution if possible. Thank u
Click to expand...
Click to collapse
Try reflashing rom again without any custom kernel .. Or try to download lineage os 14.1 rom zip again
I tried reflashing but still no use and also this time I didn't use any custom kernel
Karthick0495 said:
I tried reflashing but still no use and also this time I didn't use any custom kernel
Click to expand...
Click to collapse
I was facing the same problem and then I solved it by flashing stock rom
Related
I have installed Twrp recovery on my Mi4i.
When I flash a new ROM and restart the device, it completes the Android is upgrading process.
But once the finishing boot screen appears, the phone automatically freezes and shuts down.
After restarting the phone I get the Language selector screen of initial setup process,but that also freezes in some seconds.
In short the custom ROM is flashed properly but i could not go with the setup process.
When I flash the official Miui ROM it does not give me any trouble and the phone works perfectly fine.
gajjargc said:
I have installed Twrp recovery on my Mi4i.
When I flash a new ROM and restart the device, it completes the Android is upgrading process.
But once the finishing boot screen appears, the phone automatically freezes and shuts down.
After restarting the phone I get the Language selector screen of initial setup process,but that also freezes in some seconds.
In short the custom ROM is flashed properly but i could not go with the setup process.
When I flash the official Miui ROM it does not give me any trouble and the phone works perfectly fine.
Click to expand...
Click to collapse
I'm guessing you're coming from MIUI7, use either version 6.6.x or 5.6.11 of MIUI, then flash TWRP and flash rom.
you are the guy most experienced thanks dude made my day
haikalizz said:
I'm guessing you're coming from MIUI7, use either version 6.6.x or 5.6.11 of MIUI, then flash TWRP and flash rom.
Click to expand...
Click to collapse
you are the guy most experienced thanks dude made my day
I do same problem as like u. I had tried all Custom rom ( E.g RR & CM12 ) it couldnt. After flash Done it was Freeze and i cant touch anything after that my Device Restarted.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6. Well there is an other solution.
https://basketbuild.com/filedl/devs?dev=thewisenerd&dl=thewisenerd/ferrari/firmware-lp-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
Help
gajjargc said:
I have installed Twrp recovery on my Mi4i.
When I flash a new ROM and restart the device, it completes the Android is upgrading process.
But once the finishing boot screen appears, the phone automatically freezes and shuts down.
After restarting the phone I get the Language selector screen of initial setup process,but that also freezes in some seconds.
In short the custom ROM is flashed properly but i could not go with the setup process.
When I flash the official Miui ROM it does not give me any trouble and the phone works perfectly fine.
Click to expand...
Click to collapse
same happens to me...how to flash miui again since I can't go to recovery again
Hi everyone
I've bought a second hand Mi 4C. The original owner had installed TWRP and LineageOS on the device.
I wanted to go back to MIUI, so I used the existing TWRP to do the usual wipes and then flash:
xiaomi.eu_multi_MI4c_V8.1.3.0.LXKCNDI_v8-5.1.zip
The ROM seems to flash correctly, however after I reboot the device it just boots back into TWRP. Basically, there's no way to boot the device "normally", it always boots to recovery!
Thinking maybe the rom was at fault, I wiped again and flashed the latest LineageOS, since I knew that was working before.
However, I then discovered that even with LineageOS the problem remained: device always starts in recovery mode!!!
How can I solve this? I'm new to Xiaomi devices, so maybe I'm missing something. I've always had Nexus phones and I've never seen a problem like this in years of flashing custom roms.
I would point torwards locked bootloader.
Maybe the volume button is stuck?
Try to go in fastboot mode and execute this:
Code:
fastboot oem device-info
If "device unlocked: False " you have to unlock bootloader or follow this guide http://en.miui.com/thread-335614-1-1.html
Hi? Did you solve this problem? My phone also keeps booting in TWRP. What i did was, get to Fastboot and typed "fastboot continue" .
Got the same. Bootloader unlocked.
i have the same issue.
I had TWRP 3.0.3-0 with the Resurrection Remix ROM. After booting into recovery and make a factory default wipe, started to boot always in recovery (TWRP). Doesn't matter if I force to reboot into system. Tried to flash the latest version of RR and nothing changed. Flashed TWRP v3.0.2 and touch screen didn't work.
Then I decided to start from the beginning, flashing the stock libra_images_6.1.7_20151221.0000.11_5.1_cn, unlock the bootloader ( fastboot oem device-info gaves me "true" unlocked), flashed TWRP 3.0.3-0, and till this point all it worked flawlessly. When I flashed the latest RR, then started the boot loop into recovery.
Any idea? Thank you very much
Latest RR 5.8.2 by AndopaX and LineageOS by HnT build with new Miui N bootloader..
You need to change TWRP base Miui N also Fw Update from Miui N..
You will get bootloop when install that roms into old Miui LP bootloader..
caxwan said:
Latest RR 5.8.2 by AndopaX and LineageOS by HnT build with new Miui N bootloader..
You need to change TWRP base Miui N also Fw Update from Miui N..
You will get bootloop when install that roms into old Miui LP bootloader..
Click to expand...
Click to collapse
Wowww! Thanks for the fast answer!
Could you help me to do that? Where can I find this TWRP base Miui N and Fw Update from MIUI N?
Thanks
korolirio said:
Wowww! Thanks for the fast answer!
Could you help me to do that? Where can I find this TWRP base Miui N and Fw Update from MIUI N?
Thanks
Click to expand...
Click to collapse
AndropaX already prepared all before build rom 5.8.2 with Miui N bootloader.
TWRP Nougat : by AndropaX
FW Update Nougat : by AndropaX
Many ways to update, I have try this one.
* Disable PIN/Pattern Lockscreen (related bug of fw nougat)
1. Boot into your old TWRP LP
2. Wipe System, Data, Dalvik and Cache
3. Install FW Update N via TWRP
4. Install new TWRP N via TWRP too
(choose install image) install to recovery
5. Reboot to new TWRP N
6. Install ROM + GAPPS via TWRP
7. Reboot to System
Yeahhhhh!!! THHHHAAAANNNKKKSSSS!!!! It works like a charm!
Hello Guys,
I am completly new here. Sorry if i do something wrong with my Thread here...
Today I tried to intsall Lineage OS 14.1 on my Wileyfox Swift (Crackling).
- Unlocked Bootloader, worked I think so.
- Installed TWRP, works
- Installed the ROM zip, seems to work
- Installed GApps, seemes to work
BUT: After restarting the system, I only can restart into fastboot/bootloader. I can go into Recovery mode. But I cannot start the system.
Tried to wipe again and to it all again several times - always the same issue.
Tried it now with Lineage 15.0 - the same.
I do not know, why does my phone always start into the bootloader and don't start the system???
THANKS FOR HELP!
Try installing LOS 14.1 again, then do a restart and let the system boot first, after successful boot, go back to TWRP and install GApps.
Hello all,
After I wiped my system, I tried to install the latest Magisk (From the official MagiskManager website) and then, after I wiped again, and tried to reboot, my phone just showed a black screen it wouldn't even show the unlocked bootloader warning or the boot logo and when I charge it, the LED flashes constantly (I'm not sure what that means) therefore I have to boot back into the recovery or the bootloader as there is no system. I looked at the system files and there was nothing there although the Lineage OS flashed successfully.
Can anyone help me?
I'm not sure whether my phone is bricked or something as every other time I did it (2 times) there were no problems.
Version of Lineage OS I tried to install (lineage-14.1-20180108-nightly-athene-signed.zip)
Device: Motorola Moto G4 2016 (Athene)
Custom Recovery: TWRP 3.0.2.0
Magsik Version: Magisk-v15.3.zip
Thanks in advance!
You never wipe system unless you are flashing a rom. You pretty much removed the OS and then tried. To boot it.
zelendel said:
You never wipe system unless you are flashing a rom. You pretty much removed the OS and then tried. To boot it.
Click to expand...
Click to collapse
Yeah after I flashed Resurrection Remix, everything went back to normal, but thanks anyways.
Need some help, I keep getting a infinite boot animation. I tried to install LineageOS (thread) on my G920F three times and let them all boot for about an hour without success.
This is the order of how I flashed it:
1. Wipe Davik, System, Data and Cache
2. Flash the LineageOS zip
3. Flash the Zerofltexx kernel img
4. First try flashed OpenGAPPS, second try flashed MindTheGAPPS and third try didn't flash GAPPS at all
5. Reboot and wait, after an hour still booting
Any idea's of what I'm doing wrong?
Fixed my issue!
Hi!
I had the same issue as you, followed the guides and installed TWRP through ODIN and flashed the OS through TWRP to boot it.
When I booted the device it just got stuck indefinitely on the loading animation (the Lineageos loading logo in my case).
Since you and some others had the same issue as me I assumed it was something to do with a new version of some software.
I resolved the issue by installing an older version of TWRP through ODIN,
I installed the TWRP version 3.2.3.
And then I flashed the same ROM with the GAPPS again.
After the ROM and GAPPS I also flashed MAGISK aswell from the magiskmanager website.
Download the MAGISK Zip.
After I flashed the ROM, GAPPS and MAGISK through the TWRP 3.2.3 it booted as intended.
Hope this works for you aswell!
how long did it take to boot
First Boot needs longer...up to 15 minutes is possible.
solonf
speedson
i have same probleme wtih my samsungs6 g920f i wiil try it ...hope it work ....
Remove the TWRP from the phone via the advance key in TWRP. I had tried several ROMs and Gapps only to get stuck on the boot screen then back to the TWRP screen. Removing the app made my new rom boot in less than 10 seconds.
If you can give us exactly the steps you follow
Lineageos 17 boot animation stuck
krimnian said:
If you can give us exactly the steps you follow
Click to expand...
Click to collapse
Steps (I have followed the instructions to the letter)
Wiped all partitions (advanced wipe)
formatted DATA partition
rebooted back into recovery
installed Lineage 17 and Gapps
Rebooted to system and left it all day, still stuck on boot animation
Tried again without gapps same results
Tried other roms they work, AOSP showing no encryption which works fine
What am I doing wrong? Do I have to flash different kernel? TWRP 3.3.1 installed.
Im using G920L it booting to long then just go to twrp anyhelp?
Helpful
crmcc said:
Remove the TWRP from the phone via the advance key in TWRP. I had tried several ROMs and Gapps only to get stuck on the boot screen then back to the TWRP screen. Removing the app made my new rom boot in less than 10 seconds.
Click to expand...
Click to collapse
this was extremely helpful as soon as i unchecked installing with twrp it worked immediately.
crmcc said:
Remove the TWRP from the phone via the advance key in TWRP. I had tried several ROMs and Gapps only to get stuck on the boot screen then back to the TWRP screen. Removing the app made my new rom boot in less than 10 seconds.
Click to expand...
Click to collapse
Can you explain the process a little?I have flashed lineage os 18.1 in moto g5 plus , but it's stuck on lineage booting animation.
rog__ said:
Can you explain the process a little?I have flashed lineage os 18.1 in moto g5 plus , but it's stuck on lineage booting animation.
Click to expand...
Click to collapse
For reference, formatting data after install seems to often be the solution when flashing a new OS to a Moto G5 Plus.
gamemaster2030 said:
Need some help, I keep getting a infinite boot animation. I tried to install LineageOS (thread) on my G920F three times and let them all boot for about an hour without success.
This is the order of how I flashed it:
1. Wipe Davik, System, Data and Cache
2. Flash the LineageOS zip
3. Flash the Zerofltexx kernel img
4. First try flashed OpenGAPPS, second try flashed MindTheGAPPS and third try didn't flash GAPPS at all
5. Reboot and wait, after an hour still booting
Any idea's of what I'm doing wrong?
Click to expand...
Click to collapse
These steps solved my issue. thanks