Related
But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!
loribuono said:
But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!
Click to expand...
Click to collapse
if you have CWM installed i can fix that for you..
I haven't noticed a difference in volume since the update, but I never have the volume that low. You could just get headphones with inline volume controls to decrease the volume.
I never even used ics on this tablet so I don't know either..
Sent From Samsung Galaxy Note 10.1 [N8013]
Edit default_gain.conf file .
jje
JJEgan said:
Edit default_gain.conf file .
jje
Click to expand...
Click to collapse
Edit it how? Looking at the file, which is in the system/etc folder for those wondering, it is fairly non-intuative. What would you change to reduce the volume ?
Sent from my GT-N8013 using Tapatalk 2
Via Google .
Or like SGS3 mod .
http://forum.xda-developers.com/showthread.php?t=1826387&highlight=default
Note 10.1 sound .
http://forum.xda-developers.com/showthread.php?t=2002197
jje
txtmikhail said:
if you have CWM installed i can fix that for you..
Click to expand...
Click to collapse
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?
loribuono said:
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?
Click to expand...
Click to collapse
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..
txtmikhail said:
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..
Click to expand...
Click to collapse
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.
loribuono said:
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.
Click to expand...
Click to collapse
Sorry i read this wrong.. i thought you wanted it louder.. but yes you can still use the equalizer with this and set everything low so the volume will also be lower.. and when you need that extra boost it will be there also...
install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth
txtmikhail said:
install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth
Click to expand...
Click to collapse
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.
loribuono said:
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.
Click to expand...
Click to collapse
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference
txtmikhail said:
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference
Click to expand...
Click to collapse
Got it. Thank you very much!
glad i could help over a month later..lol
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Mee too low vol
I too am searching for an answer for this .
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
HEY..try this...it might work ..and TRY IT AT YOUR OWN RISK!
Use Root Explorer
At the top right hand corner switch from mount r/o to r/w
Go to Systems/build.prop
At the bottom of build.prop text file add this line;
ro.config.vc_call_vol_steps=10
save, mount r/o
Reboot
:good: Hope this works!
Go to Engineer Mode and increase the level.
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level To 155 its Stable im Use That On Many Times Ago
^^ make ur signature pic smaller, or else mods might ban u
srini155 said:
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Click to expand...
Click to collapse
this will not work on unrooted phn..
charlessxavier said:
^^ make ur signature pic smaller, or else mods might ban u
Click to expand...
Click to collapse
This is not Too Much Bigger
As we all know the volumes on the XZ1C are very low especially the loudspeaker , feels bad when your are on Call or Music with loudspeaker and when the Mic sensitivity is low when the phone is not near the mouth.
I have done some changes in Mixer_Path.xml which helped to increase volumes.
Hope that helps Z1C owners who need only some boost in sounds rather than third party custom sound mods.
Device must be on stock KK rooted and this also may work on XZ1
INSTRUCTIONS:
PLACE THE MIXER_PATHS.XML FILE IN SYSTEM/ETC DIRECTORY WITH 0644(RW-R--R--) PERMISSIONS AND REBOOT
Hit Thanks if you liked it
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
sinosuke said:
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
Click to expand...
Click to collapse
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
This just flash with recovery?
imr.uvce said:
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
Click to expand...
Click to collapse
Okay,will try
thanks
this is what i need,
thanks a lot,
just copy the xml, set the permission, reboot, and voila
the z1c volume is amplified
:good: :good:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
myrddral said:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
Click to expand...
Click to collapse
Speaker section in that XML is what impacts the call loudspeaker and music loudspeaker together.
Let know what you want !!
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
myrddral said:
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
Click to expand...
Click to collapse
If you want stock, use the stock file in OP .
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
myrddral said:
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
Click to expand...
Click to collapse
check this file ,speaker is reduced a bit.
Better, thanks very much!
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
kxf41 said:
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
Click to expand...
Click to collapse
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
imr.uvce said:
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
Click to expand...
Click to collapse
great! is the headset a little louder? i felt it could handle a bit more
am new user on android
can you tell me steps to do that
and how can i do 0644(rw-r--r--) permissions
Requirements:
1. Root
2. X-plore or any other file manager with root access
Procedure:
1. Extract and replace "mixer_paths.xml" in root/system/etc
2. Change the permissions to rw-r--r--
3. Restart your mobile
Note:
I won't be responsible if anything goes wrong.
I'm also providing the stock xml file if you want to revert back to the original settings.
Thanks to AndroPlus for providing custom kernel & recovery for the Z5P Dual.
***Version 2 added with sound from both speakers in speaker mode during a voice call***
Thanks!
As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.
Killastyle said:
As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.
Click to expand...
Click to collapse
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.
arjun.arora said:
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.
Click to expand...
Click to collapse
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.
Killastyle said:
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.
Click to expand...
Click to collapse
Yes, maybe so. What happens if you don't turn it up to the full volume, I mean at 90 percent volume.
If I turn it up to 90 there is no problem
Killastyle said:
If I turn it up to 90 there is no problem
Click to expand...
Click to collapse
Great..
@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911
Alex1911 said:
@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911
Click to expand...
Click to collapse
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..
arjun.arora said:
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..
Click to expand...
Click to collapse
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911
Alex1911 said:
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911
Click to expand...
Click to collapse
Send me the stock xml file for the Z5, I'll take a look.
Can you take a screenshot of the settings you changed? That way, people can change them on their own until they find the best setting for their phone and earbuds
Is your Mod is Stereo also for Incoming call ringtones ?
I Mean is Ringtone sound comes from both speaker for incoming Call & Notifications Sound ?
Yes, both speakers play the ringtone. Sound from the bottom speaker is louder than the top one.
Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada
dontbelive said:
Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada
Click to expand...
Click to collapse
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.
arjun.arora said:
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.
Click to expand...
Click to collapse
No bcuz I was planning to release a sound mod for z5 line like I did for Z1/Z2/Z3 line, next will be z4 and z5 line. Just change to another name.
What Abt premium sound mod?
Why not use this name.
If not change the name then i will not publish my soundmod here in future.
Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker
Funkmasterchilla said:
Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker
Click to expand...
Click to collapse
Well it should. Do one thing, send me your stock mixer_paths.xml file. I'll edit it.
I have oneplus one i opened it just out of curiosity and i broke(scrapped off) 3 diod from main chip-set placed just above mic flex cable connection slot. My mic stopped working. while recording video i get beep sound + my sound but while calling i only get beep sound. I dont think hardware repair is possible so i was wondering if there is any software way to make other mics as primary (any specific ROM that offers this or any other manual coding method)?
charizard42 said:
I have oneplus one i opened it just out of curiosity and i broke(scrapped off) 3 diod from main chip-set placed just above mic flex cable connection slot. My mic stopped working. while recording video i get beep sound + my sound but while calling i only get beep sound. I dont think hardware repair is possible so i was wondering if there is any software way to make other mics as primary (any specific ROM that offers this or any other manual coding method)?
Click to expand...
Click to collapse
An edited XML file could work.. I'll try to find it, there are threads discussing similar topics, but haven't seen this exact scenario..
Setting.Out said:
An edited XML file could work.. I'll try to find it, there are threads discussing similar topics, but haven't seen this exact scenario..
Click to expand...
Click to collapse
can you link similar threads?
charizard42 said:
can you link similar threads?
Click to expand...
Click to collapse
I'm looking at my theory.. The threads are in conjunction to low mic volume, but if you alter the path, you may be able to change the input source..
I'm thinking to make the speaker mic the new main mic..
This is mixer_paths.XML in /system /ect
Setting.Out said:
I'm looking at my theory.. The threads are in conjunction to low mic volume, but if you alter the path, you may be able to change the input source..
I'm thinking to make the speaker mic the new main mic..
This is mixer_paths.XML in /system /ect
Click to expand...
Click to collapse
So what we need to do is
- deactivate main mic
- take input from other mic
- make it primary
any other point i am missing?
charizard42 said:
So what we need to do is
- deactivate main mic
- take input from other mic
- make it primary
any other point i am missing?
Click to expand...
Click to collapse
Testing..
Make a copy of the original xml
Setting.Out said:
Testing..
Click to expand...
Click to collapse
Great
By the way my phone is not rooted yet. I guess i will be needing that. Any suggestions? i wish to do it now.
charizard42 said:
By the way my phone is not rooted yet. I guess i will be needing that. Any suggestions? i wish to do it now.
Click to expand...
Click to collapse
Make a backup of everything you can from your SD, use Helium app to backup some apps and SMS Backup &Restore for calls and SMS..
http://forum.xda-developers.com/one...-timmaaas-how-to-guides-t2839471/post54640979
lot of download going on my side.
did the script work?
charizard42 said:
lot of download going on my side.
did the script work?
Click to expand...
Click to collapse
My phone isn't broken, so I can't say as to which mic is working instead of another.. Don't worry though, you won't brick your phone by rooting, nor this mod..
Setting.Out said:
My phone isn't broken, so I can't say as to which mic is working instead of another.. Don't worry though, you won't brick your phone by rooting, nor this mod..
Click to expand...
Click to collapse
I am not worried about rooting but about mic stuff :fingers-crossed:
Setting.Out said:
My phone isn't broken, so I can't say as to which mic is working instead of another.. Don't worry though, you won't brick your phone by rooting, nor this mod..
Click to expand...
Click to collapse
You can always rub your finger over the mic. If the noise is low, it`s not that mic that is being used.
projeto56 said:
You can always rub your finger over the mic. If the noise is low, it`s not that mic that is being used.
Click to expand...
Click to collapse
nice thought
How did the script run???
I have the same exact problem. My HTC One main mic has been damaged, whenever Im on call the other end only gets the static noise but can hear clearly in loudspeaker mode (ie from my secondary mic), is there a way to disable the primary mic and make the secondary mic as primary ??