Related
Does anyone have a full rom i can use? im getting a updater process ended with ERROR: 7 , when i flash emui 4.1 i had emui 5.0 before i formated everything
Here is what u need
lolimaster said:
Does anyone have a full rom i can use? im getting a updater process ended with ERROR: 7 , when i flash emui 4.1 i had emui 5.0 before i formated everything
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942
non of them work i get ERROR 7
i dont know what to do i formatted everything. when ever i flash anything its says failed to mount /system when ever i restart
lolimaster said:
non of them work i get ERROR 7
Click to expand...
Click to collapse
Check here:
http://www.hihonor.com/us/support/index.html
There is a Honor 8 rollback package file and a full zip Android 6.0 EMUI4.1 file for your FRD-L04. The rollback zip file has a pdf with instructions. Good luck.
Dominikrod said:
Check here:
http://www.hihonor.com/us/support/index.html
There is a Honor 8 rollback package file and a full zip Android 6.0 EMUI4.1 file for your FRD-L04. The rollback zip file has a pdf with instructions. Good luck.
Click to expand...
Click to collapse
do i have to have a rom before this? i have no os installed right now
lolimaster said:
do i have to have a rom before this? i have no os installed right now
Click to expand...
Click to collapse
Well if you did a full system Wipeout using TWRP recovery I don't think you'll need the rollback file. The rollback is to downgrade your phone from Nougat to Marshmallow. I haven't used it myself but I think it helps you to keep your current data an configuration after downloading downgrading. On the other hand, if you just push the MM update.app file into the microSD's "dload" folder and make the 3-hold-button procedure, it will reformat the whole phone and relock it back to stock recovery and everything. At least that's what happens with my L14 US model when I use the full B162 update.app file.
Dominikrod said:
Well if you did a full system Wipeout using TWRP recovery I don't think you'll need the rollback file. The rollback is to downgrade your phone from Nougat to Marshmallow. I haven't used it myself but I think it helps you to keep your current data an configuration after downloading downgrading. On the other hand, if you just push the MM update.app file into the microSD's "dload" folder and make the 3-hold-button procedure, it will reformat the whole phone and relock it back to stock recovery and everything. At least that's what happens with my L14 US model when I use the full B162 update.app file.
Click to expand...
Click to collapse
how do i flash it if i dont have recovery?
lolimaster said:
how do i flash it if i dont have recovery?
Click to expand...
Click to collapse
I think this guide will help you to get your phone up and running again.
https://forum.xda-developers.com/honor-8/how-to/guide-fix-boot-loop-bricked-honor-8-t3545202
Dominikrod said:
I think this guide will help you to get your phone up and running again.
https://forum.xda-developers.com/honor-8/how-to/guide-fix-boot-loop-bricked-honor-8-t3545202
Click to expand...
Click to collapse
can you link me to a firmwire to download for my honor 8 L0-4. I dont know which one to download and when i do i get software install failed stoped at like 50 percent
lolimaster said:
can you link me to a firmwire to download for my honor 8 L0-4. I dont know which one to download and when i do i get incorrect firmware error
Click to expand...
Click to collapse
I gave you the link seven posts before this one. Here you have it again:
http://www.hihonor.com/us/support/details/index.html?DOC_ID=89264
Dominikrod said:
I gave you the link seven posts before this one. Here you have it again:
http://www.hihonor.com/us/support/details/index.html?DOC_ID=89264
Click to expand...
Click to collapse
That one doesnt work for some reason. It says incompatibility with current version
lolimaster said:
That one doesnt work for some reason. It says incompatibility with current version
Click to expand...
Click to collapse
Just to make sure, is your Honor 8's model FRD-L04C567?
If that it is your model number then go to this link and download that file. That's is the last MM EMUI4.1 full update:
https://www.androidfilehost.com/?w=files&flid=129430
Remember that you need to extract the UPDATE.APP file and place it into your microSD card's "dload" folder.
Dominikrod said:
Just to make sure, is your Honor 8's model FRD-L04C567?
If that it is your model number then go to this link and download that file. That's is the last MM EMUI4.1 full update:
https://www.androidfilehost.com/?w=files&flid=129430
Remember that you need to extract the UPDATE.APP file and place it into your microSD card's "dload" folder.
Click to expand...
Click to collapse
Thank you for your time . I got it working now. I Hope you are blessed with strong children
lolimaster said:
Thank you for your time . I got it working now. I Hope you are blessed with strong children
Click to expand...
Click to collapse
You made me giggle with the "strong children" part and almost spewed my drink on my shirt. :silly: You're very welcome.
So, the thing is im pretty new here.
I had Marshmallow on my 6x, i had TWRP, then I performed a wipe of every partition (except of Micro SDcard) and installed Resurrection Remix.
It was installed, there was a little Problem, so i wanted to go back to the Stock Firmware.
I wiped it again, and installed the first one of the update.app's (from http://www.stechguide.com/update-honor-6x-to-android-nougat/ ) via dload Method.
Then the second update.app was installed via dload Method. I wanted to reboot the device, but now it doesn't boot into Nougat. Instead it boots to eRecovery.
And now I'm stuck here, no OS and no TWRP (problably got removed by first Nougat update.app)
So is there any way I can install a new OS? or maybe wipe the system partition for a clean start?
THX in advance,
-Paul
Man I don't know. Can you connect via ADB to a pc ?
If so you can try to install MM update B151 full from http://hwmt.ru/oth/HWFF/info/view.php?find_model=
Nollie8969 said:
Man I don't know. Can you connect via ADB to a pc ?
If so you can try to install MM update B151 full from http://hwmt.ru/oth/HWFF/info/view.php?find_model=
Click to expand...
Click to collapse
I'm going to try that, not sure which command I should use... (newbie xD)
Am i right with
adb devices
Click to expand...
Click to collapse
to check if my phone connects, and
adb reboot bootloader
Click to expand...
Click to collapse
to boot my phone to bootloader, finally
fastboot flash system thefullupdatefile
Click to expand...
Click to collapse
?
Depends on your system. If you talk about commands I guess you're on Windows (I'm not). Then search the web or wait for others to respond.
Nollie8969 said:
Depends on your system. If you talk about commands I guess you're on Windows (I'm not). Then search the web or wait for others to respond.
Click to expand...
Click to collapse
nope im on mac, but you cant flash zip files via fastboot, i also tried to install it via dload and it says Software install failed. you know anything else?
You have to flash it with fastoob using terminal and comands if u r under macos
pt_2001 said:
So, the thing is im pretty new here.
I had Marshmallow on my 6x, i had TWRP, then I performed a wipe of every partition (except of Micro SDcard) and installed Resurrection Remix.
It was installed, there was a little Problem, so i wanted to go back to the Stock Firmware.
I wiped it again, and installed the first one of the update.app's (from http://www.stechguide.com/update-honor-6x-to-android-nougat/ ) via dload Method.
Then the second update.app was installed via dload Method. I wanted to reboot the device, but now it doesn't boot into Nougat. Instead it boots to eRecovery.
And now I'm stuck here, no OS and no TWRP (problably got removed by first Nougat update.app)
So is there any way I can install a new OS? or maybe wipe the system partition for a clean start?
THX in advance,
-Paul
Click to expand...
Click to collapse
Same happened to me once !!
Flash the twrp recovery . Wipe em all .
Then put mm dload in internal via MTP .
Then flash the stock recovery .
Then install the dload . Then wipe the system from stock recovery and you are good to go
SmartDrevil said:
Same happened to me once !!
Flash the twrp recovery . Wipe em all .
Then put mm dload in internal via MTP .
Then flash the stock recovery .
Then install the dload . Then wipe the system from stock recovery and you are good to go
Click to expand...
Click to collapse
Ok i put MM in dload on Internal, but I dont have the stock recovery image you now where i can download it?
pt_2001 said:
Ok i put MM in dload on Internal, but I dont have the stock recovery image you now where i can download it?
Click to expand...
Click to collapse
You can extract the stock recovery from
UPDATE.APP using Huawei Update App Extractor :good:
SmartDrevil said:
You can extract the stock recovery from
UPDATE.APP using Huawei Update App Extractor :good:
Click to expand...
Click to collapse
Hello SmartDrevil..
I have indian honor 6x B132 device.... i was on emui 4.1 mm then i updated emui 5.0 beta N through firmware finder app ....i m facing lots of bugs.. now i want to install official stock mm rom on my device... What should i do ? Plz help me !!
there are 2 recoveries one is recovery and other is recovery2 which one to extract and how to flash ?
i m on nougat emui 5 bricked no os isntalled just fastboot and twrp
i m not able to flash stock recovery
narshi shukla said:
i m not able to flash stock recovery
Click to expand...
Click to collapse
Dload method is your friend
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @shashank1320 @RedSkull23
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
narshi shukla said:
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @[email protected]
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
Wanna fix the nrd test keys and unlocked stuff.
I can help and this will vanish too :good:
link to download full firmware(bln 22 b340)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v94286/f1/full/update.zip
if ur update fails
download this file and flash again
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
---------- Post added at 06:33 AM ---------- Previous post was at 06:32 AM ----------
shashank1320 said:
Wanna fix the nrd test keys and unlocked stuff.
I can help and this will vanish too :good:
Click to expand...
Click to collapse
yes how to fix this?
narshi shukla said:
link to download full firmware(bln 22 b340)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v94286/f1/full/update.zip
if ur update fails
download this file and flash again
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
---------- Post added at 06:33 AM ---------- Previous post was at 06:32 AM ----------
yes how to fix this?
Click to expand...
Click to collapse
2nd link is mostly not required. 1st will fix 99.9999%
narshi shukla said:
THANKS @[email protected]
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
Glad that you've finally restored a working OS dude, you're welcome.
narshi shukla said:
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @shashank1320 @RedSkull23
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
I have a bricked Honor 6x BLN-L24C567 (USA MODEL), i've tried the dload method with the oficial files update_full_BLN-L24_hw_usa.zip and update.zip , i get "software install failed!". Can you point me to the right files for mi device, thanks in advance.
vcetina said:
I have a bricked Honor 6x BLN-L24C567 (USA MODEL), i've tried the dload method with the oficial files update_full_BLN-L24_hw_usa.zip and update.zip , i get "software install failed!". Can you point me to the right files for mi device, thanks in advance.
Click to expand...
Click to collapse
Which firmware number you were on before issue??
is there anyone tried flash kalinet hunter on honor 6x on mm stock rom with twrp?
lester1992 said:
is there anyone tried flash kalinet hunter on honor 6x on mm stock rom with twrp?
Click to expand...
Click to collapse
Yup i installed the latest nightly, and it mostly went ok. everything on the phone side works ok. I just cant get an external wireless card to work. But working on it!
Hi i have an honor 6x with magisk installed if i install kali nethunter magisk work or not?anyone have tried?
It should work, since for it worked for others
Ok thanks for the answer Can anyone provide me a link for Kali nethunter please?
nemesis87345 said:
Ok thanks for the answer Can anyone provide me a link for Kali nethunter please?
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/honor-6x/how-to/how-to-install-net-hunter-honor-6x-t3588827
Hi my honor 6x is softly bricked I tried every thing but I can't recover the stock os
I want to install kali nethunter on it so can any one recommend a custom rom for the honor 6x that is compatible with kali nethunter .
Thanks in advance
AkramRonald said:
Hi my honor 6x is softly bricked ? I tried every thing but I can't recover the stock os ?
I want to install kali nethunter on it so can any one recommend a custom rom for the honor 6x that is compatible with kali nethunter .
Thanks in advance ?
Click to expand...
Click to collapse
It's only compatible with stock EMUI
PalakMi said:
It's only compatible with stock EMUI
Click to expand...
Click to collapse
I'm tring to flash the stock firmware but nothing is working
AkramRonald said:
I'm tring to flash the stock firmware but nothing is working
Click to expand...
Click to collapse
You have TWRP?!
PalakMi said:
You have TWRP?!
Click to expand...
Click to collapse
Yes I flashed twerp as recovery2
AkramRonald said:
Yes I flashed twerp as recovery2
Click to expand...
Click to collapse
Flash stock recovery of the firmware you were on (you need to remember which) and then install full firmware through dload
PalakMi said:
Flash stock recovery of the firmware you were on (you need to remember which) and then install full firmware through dload
Click to expand...
Click to collapse
I still have the stock recovery and I tried to flash the stock firmware using the dload method but it didn't work , I tried the data update file , nothing , I also tried the old firmware ( emui 4.1 ) but still didn't work
I extracted the update.app the emui 5 firmware and flashed the system , recovery , boot and cust images but still ?
AkramRonald said:
I still have the stock recovery and I tried to flash the stock firmware using the dload method but it didn't work , I tried the data update file , nothing , I also tried the old firmware ( emui 4.1 ) but still didn't work
I extracted the update.app the emui 5 firmware and flashed the system , recovery , boot and cust images but still
Click to expand...
Click to collapse
@hackslash can you assist him?!
@AkramRonald
There are 2 ways to solve this.
1. If you have the EMUI 5 update.app available, then extract Recovery2 from the .app file and flash it to the recovery2 partition using Fastboot.
You should not flash EMUI 5 packages through dload. You should flash a downgrade package first then the EMUI 4.1 package.
2. Tell me your model number and I'll give you a link to the firmware which you can easily flash via TWRP.
hackslash said:
@AkramRonald
There are 2 ways to solve this.
1. If you have the EMUI 5 update.app available, then extract Recovery2 from the .app file and flash it to the recovery2 partition using Fastboot.
You should not flash EMUI 5 packages through dload. You should flash a downgrade package first then the EMUI 4.1 package.
2. Tell me your model number and I'll give you a link to the firmware which you can easily flash via TWRP.
Click to expand...
Click to collapse
model Bll-l21
Build B361
I have the stock firmware update.app
The nougat update.app
And the nougat update data update.app
AkramRonald said:
model Bll-l21
Build B361
I have the stock firmware update.app
The nougat update.app
And the nougat update data update.app
Click to expand...
Click to collapse
Excellent.
Those files must have been inside a zip file.
Simply install TWRP and flash those both zip files.
Then install recovery2 and perform a factory reset.
hackslash said:
Excellent.
Those files must have been inside a zip file.
Simply install TWRP and flash those both zip files.
Then install recovery2 and perform a factory reset.
Click to expand...
Click to collapse
Can I flash the zip which contains the update.app file with tarp. ?????
Or should I extract the images inside the update.app file and flash them individually using twrp. ??????
AkramRonald said:
Can I flash the zip which contains the update.app file with tarp. ?????
Or should I extract the images inside the update.app file and flash them individually using twrp. ??????
Click to expand...
Click to collapse
Flash the zip files using TWRP. Do not extract and flash. Install zip file only.
hackslash said:
Flash the zip files using TWRP. Do not extract and flash. Install zip file only.
Click to expand...
Click to collapse
So the rollback zip file first then the emui 4.1 zip ?????
I need help! I often softbrick my device, but can be fixed by using official 6.0 update.app However updating back to emui 5 takes way too long. But every firmware i download from huawei firmware finder isn't valid for dload for some reason! Help!
Did you already tried with firmwares listed as "FullOTA-MF-PV" available on hwmt.ru site, section firmware database? The Point Version is a firmware that must work while you're executing a dload method flash, the safest usually.
What's your build number? I'll provide a valid firmware to use with dload method.
BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind
Use team mt tool extract update.app from firmware and use Huawei extracter to provide required file
Filo 97 said:
BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind
Click to expand...
Click to collapse
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.
RedSkull23 said:
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.
Click to expand...
Click to collapse
Which of the two .zips?
Filo 97 said:
Which of the two .zips?
Click to expand...
Click to collapse
The biggest one with dload method first of all, then the other two dload too (or flash by TWRP)
TWRP says command unknown, and how am i supposed to flash the second one? (There is no third file) Do i dload big one, then boot to EMUI, then shutdown, extract SD, switch dload folder, and install the second?
Refer to this guide https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
i have also same issue with my honor 6x not working dload installing failed on 5%
shehroz71 said:
i have also same issue with my honor 6x not working dload installing failed on 5%
Click to expand...
Click to collapse
Did the failure brick your phone? or the phone just reboots itself normally? are you sure that your firmware is approved first for installtion before you apply it? (you can know this using Firmware Finder by checking if it's approved first or not for installation by Huawei)
Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.
iconius said:
Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.
Click to expand...
Click to collapse
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader
ScardracS said:
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader
Click to expand...
Click to collapse
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!
iconius said:
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!
Click to expand...
Click to collapse
Search hurupdater and you'll find the answer
ScardracS said:
Search hurupdater and you'll find the answer
Click to expand...
Click to collapse
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me
Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone
iconius said:
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me
Click to expand...
Click to collapse
Use eRecovery
ScardracS said:
Use eRecovery
Click to expand...
Click to collapse
When i enter erecovery i get a message: "data partition severely corrupted. To reset your device, please format the data partition".
Should i do it, or do i try something else?
Thanks a LOT for your help!
bumbi99 said:
Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone
Click to expand...
Click to collapse
I am running OpenKirin Omni rom alpha 5.2. Do i just enter erecovery and wipe data partition?
Thank for help!
Format data
Inviato dal mio FRD-L09 utilizzando Tapatalk