Database Info

HUAWEI P9 Rollback Package (EVA-L09, from Android 7.0 EMUI 5.0 to Android 6.0)

Rollback L09C432
http://consumer.huawei.com/se/support/downloads/detail/index.htm?id=91623
http://download-c.huawei.com/download/downloadCenter?downloadId=91623&version=357533&siteCode=se

allready posted

dracushor87 said:
allready posted
Click to expand...
Click to collapse
I know but this is for L09, your is for L19. I know that your work on L09 to but not everyone knows that so maby best to have both here.

ok i updated my thread also

This is for C900 not C432

safariking said:
This is for C900 not C432
Click to expand...
Click to collapse
The Rolleback file is C900.

Mostar088 said:
The Rolleback file is C900.
Click to expand...
Click to collapse
Hi, i rollback to b182 mm my p9 l19c432 and everything is fine but i can`t apply theme, some icons are old, and some apps missing like compass. Do you know what can help me?

Kovacc56 said:
Hi, i rollback to b182 mm my p9 l19c432 and everything is fine but i can`t apply theme, some icons are old, and some apps missing like compass. Do you know what can help me?
Click to expand...
Click to collapse
When u Rollback u need to flash a FullOTA-MF-PV Firmware or u will end up with a broken cust. Problem is that there is no Full Firmware to download.
There is a L09C432B136 Firmware from paulobrian u can try with.
Cant guarantee it will work but u can try it.
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Here is the guide he wrote:
When flashing the B136 ROM, make sure you copy all files and folders to your sdcard.
It should look like this on your SD:
Code:
/dload/UPDATE.APP
/dload/dt/default/update_data_dt_default.app
/dload/hw/eu/update_data_hw_eu.app
/dload/hw/normal/update_data_hw_normal.app
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.

Mostar088 said:
When u Rollback u need to flash a FullOTA-MF-PV Firmware or u will end up with a broken cust. Problem is that there is no Full Firmware to download.
There is a L09C432B136 Firmware from paulobrian u can try with.
Cant guarantee it will work but u can try it.
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Here is the guide he wrote:
When flashing the B136 ROM, make sure you copy all files and folders to your sdcard.
It should look like this on your SD:
Code:
/dload/UPDATE.APP
/dload/dt/default/update_data_dt_default.app
/dload/hw/eu/update_data_hw_eu.app
/dload/hw/normal/update_data_hw_normal.app
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.
Click to expand...
Click to collapse
Tnx for answer.
Yes i flashed only update.app and i download it from official huawei site, rollback package too. Update.app have 3.22gb, i don't know how this is not full firmware..
How i can flash b136 if i have b182 now? Rollback package is only from 5.0 nougat..
Another question, how i can install that " update_data_ hw " zip files? This is not update_data_hw.app this is zip files(update_data_hw.zip), and when i extract it i have 2 folders META, and data.. I don't have file with .app there so i don't know can my phone recognize .zip by dload method, and can i only flash that data_hw files now not firmware again?

Kovacc56 said:
Tnx for answer.
Yes i flashed only update.app and i download it from official huawei site, rollback package too. Update.app have 3.22gb, i don't know how this is not full firmware..
How i can flash b136 if i have b182 now? Rollback package is only from 5.0 nougat..
Another question, how i can install that " update_data_ hw " zip files? This is not update_data_hw.app this is zip files(update_data_hw.zip), and when i extract it i have 2 folders META, and data.. I don't have file with .app there so i don't know can my phone recognize .zip by dload method, and can i only flash that data_hw files now not firmware again?
Click to expand...
Click to collapse
U should put the update.app from B182 in dload folder on the sd card, and put the dt and hw folder in the same dload folder from the B136 firmware.
Then dial *#*#2846579#*#* and choose to uppdate.

Mostar088 said:
U should put the update.app from B182 in dload folder on the sd card, and put the dt and hw folder in the same dload folder from the B136 firmware.
Then dial *#*#2846579#*#* and choose to uppdate.
Click to expand...
Click to collapse
Tnx again for reply, i was busy. Can my folder looks like dload(update.app , data (hw_init))? In this hw_init folder are dt and hw. I have update in "about phone" and folder hwOUC on internal storage and there is b383 firmware - update.zip and update_data_full_hw_eu.zip do you think update to b383 will fix problem?

Kovacc56 said:
Tnx again for reply, i was busy. Can my folder looks like dload(update.app , data (hw_init))? In this hw_init forder are dt and hw. I have update in "about phone" and folder hwOUC on internal storage and there is b383 firmware update.zip and update_data_full_hw_eu.zip do you think update to b383 will fix problem?
Click to expand...
Click to collapse
B383 is Nougat, if u want to upgrade to Nougat u can use B383.
Use Firmware Finder to upgrade, u must choose FullOTA-MF-PV to upgrade.
Use the Proxy method in the app to upgrade.
Sent from my LON-L29 using XDA Labs

Mostar088 said:
B383 is Nougat, if u want to upgrade to Nougat u can use B383.
Use Firmware Finder to upgrade, u must choose FullOTA-MF-PV to upgrade.
Use the Proxy method in the app to upgrade.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
I know b383 is Nougat but don't know can it help. Do this fix a problem?
And why with firmware finder if i have it in updater (settings> updater > new version(b383) > quick update?

Kovacc56 said:
I know b383 is Nougat but don't know can it help. Do this fix a problem?
And why with firmware finder if i have it in updater (settings> updater > new version(b383) > quick update?
Click to expand...
Click to collapse
Ok, did not.know u got OTA.
How big is the update?
Sent from my LON-L29 using XDA Labs

Mostar088 said:
Ok, did not.know u got OTA.
How big is the update?
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Yes i have. I wanted to screenshot you but didn't know how to put picture here on xda...
EVA-L19C432B383 -- 2.28gb. Is it okay?

Kovacc56 said:
Yes i have. I wanted to screenshot you but didn't know how to put picture here on xda...
EVA-L19C432B383 -- 2.28gb. Is it okay?
Click to expand...
Click to collapse
That should fix it, that is the Full Packege.
Sent from my LON-L29 using XDA Labs

Mostar088 said:
That should fix it, that is the Full Packege.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Thank you my friend. I appreciate your effort.
I will try it tomorrow.

Kovacc56 said:
Thank you my friend. I appreciate your effort.
I will try it tomorrow.
Click to expand...
Click to collapse
:good:
Sent from my LON-L29 using XDA Labs

Stuck On NRD90M test keys Help

Hey guys ive been stuck on NRD90M test keys for a while i have a nxt-l29 i installed nougat manually via twrp and the build number was NRD90M ive tried dload for several firmwares but all fail at 5% the roll back packages wont work either if anyone can help i would appreciate " bluetooth doesnt work and other major issues like app crashing and random freezing "
thanks in advance

nad.j said:
Hey guys ive been stuck on NRD90M test keys for a while i have a nxt-l29 i installed nougat manually via twrp and the build number was NRD90M ive tried dload for several firmwares but all fail at 5% the roll back packages wont work either if anyone can help i would appreciate " bluetooth doesnt work and other major issues like app crashing and random freezing "
thanks in advance
Click to expand...
Click to collapse
You need roll back package for L29. It will be around 90 mb. Put it in dload folder in sdcard. Then go to dialer and type *#*#2846579#*#* and then select software upgrade. It will reboot and will undergo that process or you can do that three finger process. Once it is done you can reboot back to your OS. This time put the B1xx or B3xx firmware in dload folder and try to do that again. It will go back.
In my case I went back from L29C432B560 to L29C432B180 doing this way. I am saying this from my personal experience. Key here is the rollback package from Huawei. It is there in one of the threads or you can google Huawei rollback package. Once you get that you resolve your issue.
Another thing I observed is locked bootloader.
Hope it works out for you.

Samavb said:
You need roll back package for L29. It will be around 90 mb. Put it in dload folder in sdcard. Then go to dialer and type *#*#2846579#*#* and then select software upgrade. It will reboot and will undergo that process or you can do that three finger process. Once it is done you can reboot back to your OS. This time put the B1xx or B3xx firmware in dload folder and try to do that again. It will go back.
In my case I went back from L29C432B560 to L29C432B180 doing this way. I am saying this from my personal experience. Key here is the rollback package from Huawei. It is there in one of the threads or you can google Huawei rollback package. Once you get that you resolve your issue.
Another thing I observed is locked bootloader.
Hope it works out for you.
Click to expand...
Click to collapse
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?

nad.j said:
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?
Click to expand...
Click to collapse
Which rollback are you using?

nad.j said:
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?
Click to expand...
Click to collapse
Go to this link
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
And select the last one L29C900B500
That is the one I used.
If that code doesn't work then try the 3 finger rule
After you do with this rollback package
You will once again come back to nougat
You can check the build number if the process is successful.
Then you have to dload again to B180 or B3xx
Hope this works for you

Samavb said:
Go to this link
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
And select the last one L29C900B500
That is the one I used.
If that code doesn't work then try the 3 finger rule
After you do with this rollback package
You will once again come back to nougat
You can check the build number if the process is successful.
Then you have to dload again to B180 or B3xx
Hope this works for you
Click to expand...
Click to collapse
i downloaded the c900b500 and when i tried to install it gave me incompatible update... failed at 5%

dexz said:
Which rollback are you using?
Click to expand...
Click to collapse
i used the nxt l29c900b500 and failed at 5% every time it gives me incompatible update ...

nad.j said:
i used the nxt l29c900b500 and failed at 5% every time it gives me incompatible update ...
Click to expand...
Click to collapse
i get this

nad.j said:
i get this
Click to expand...
Click to collapse
What's your original region?
Did you try to install update_data.zip again via twrp?

dexz said:
What's your original region?
Did you try to install update_data.zip again via twrp?
Click to expand...
Click to collapse
its m.e.a
and tried to install using twrp but i get alot of failed nd unable to mount etc

nad.j said:
its m.e.a
and tried to install using twrp but i get alot of failed nd unable to mount etc
Click to expand...
Click to collapse
Which twrp version are you using?
Which partition was failed to mount?
Did you format data before install?

dexz said:
Which twrp version are you using?
Which partition was failed to mount?
Did you format data before install?
Click to expand...
Click to collapse
im using twrp 3.0.3-0 nd all format attempts fail

nad.j said:
im using twrp 3.0.3-0 nd all format attempts fail
Click to expand...
Click to collapse
Please use twrp 3.0.2 (Nougat) . Twrp 3.0.3 is broken.
You can get it from here. https://forum.xda-developers.com/ma...ot-nougat-mate-8-phh-superuser-t3570898/page2

dexz said:
Please use twrp 3.0.2 (Nougat) . Twrp 3.0.3 is broken.
You can get it from here. https://forum.xda-developers.com/ma...ot-nougat-mate-8-phh-superuser-t3570898/page2
Click to expand...
Click to collapse
should i format then install the rollback

nad.j said:
should i format then install the rollback
Click to expand...
Click to collapse
Don't think it will make any difference. You may try to install update.zip (EMUI 4.0) via twrp.
Just checking. Is your FRP unlocked?

dexz said:
Don't think it will make any difference. You may try to install update.zip (EMUI 4.0) via twrp.
Just checking. Is your FRP unlocked?
Click to expand...
Click to collapse
i formated the device and using twrp 3.0.2 tried to install rollback pack and the 6.0 software but i kept getting i kept getting this "could not find meta inf com google android update binary in the zip file huwaei " and then i tried to format system then flash 6.0 still got the same error and now i re installed the nrd90m since it got stuck on the huawei logo and still nothing is working out

nad.j said:
i formated the device and using twrp 3.0.2 tried to install rollback pack and the 6.0 software but i kept getting i kept getting this "could not find meta inf com google android update binary in the zip file huwaei " and then i tried to format system then flash 6.0 still got the same error and now i re installed the nrd90m since it got stuck on the huawei logo and still nothing is working out
Click to expand...
Click to collapse
Can you boot to bootloader and check if FRP is unlocked or lock?
Make sure your original firmware (6.0) is full not ota.

dexz said:
Can you boot to bootloader and check if FRP is unlocked or lock?
Make sure your original firmware (6.0) is full not ota.
Click to expand...
Click to collapse
whats frp ?

How to Rollback from Nougat to Stock - Mate 8 - L29
nad.j said:
i downloaded the c900b500 and when i tried to install it gave me incompatible update... failed at 5%
Click to expand...
Click to collapse
I had the same problems.
option 1
I downloaded stock B560 zip files
flashed it in TWRP
next I locked the bootloader
now the dload to rollback - worked. buildnumber - changed
then another dload to B180 to go back.
after that I did dload to B190
updated to B560 using system update. then I flashed kangvip B577 and its all good now.
my phone was debranded to L29c432 so I used these files.
you have to get the right set of files for your phone model especially stock firmware.
roll back package from here
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
locked bootloader and stock recovery did the trick for me.
hope it works out for you. :good:

nad.j said:
whats frp ?
Click to expand...
Click to collapse
You can change by switch off your phone then press volume down and plug in your usb cable. It will bring you to bootloader mode. From there it will tell you bootloader and FRP status

Need help fixing an Honor 8. Stuck on EMUI 4.0 after failing with custom ROMs

Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!

On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method

Rayan19997 said:
On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method
Click to expand...
Click to collapse
The custom ROM was Linageos 14.1, so it wasn't anything EMUI based.
I'm gonna try and manually flash the ROM from an update.app that we downloaded from the app Firmware Finder.

ZelafAry said:
Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!
Click to expand...
Click to collapse
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??

hassanjavaid8181 said:
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??
Click to expand...
Click to collapse
We did not make a twrp backup (In hindsight we should've....)
We don't have twrp on it right not but can be fixed if needed.
We were on the latest update available to the phone which should be latest today as well. (OTA)

Flashing it manually made the phone enter a bootloop. It didn't even start the firmware. Any suggestions?
EDIT: We got into Fastboot. What are our options?

Right now your best option in my opinion is to flash Boot.img, recovery.img,cust.img and system.img that you will extract from the UPDATE.APP of your CURRENT Rom. Then just try the dload method again and again, it may not accept the firmware you try to flash but in this case just try another, but not a lower one because you need the rollback package to do that

Rayan19997 said:
Right now your best option is to pray for USB debugging to be enabled and then unlock the bootloader if you didn't do it earlier. After that you should try to flash TWRP
Click to expand...
Click to collapse
What should we do after we've flashed TWRP? When I tried flashing LineageOS 14 it decided to fail the installation somehow and be at an endless boot animation. So I'd like to get the phone restored to EMUI5.0.

Sorry, what I said was garbage, I just edited my comment, you're so quick lol

Rayan19997 said:
Sorry, what I said was garbage, I just edited my comment, you're so quick lol
Click to expand...
Click to collapse
Well currently there's a broken firmware on it of FRD-L09C432B943... Or something like that.
I think at this point he's looking at getting a new phone all together.

No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:

Rayan19997 said:
No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:
Click to expand...
Click to collapse
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?

Yeah on honor official site: Hihonor
Or with firmware finder

ZelafAry said:
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?
Click to expand...
Click to collapse
If you need a full firmware then you should visit official honor site..

If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot

hassanjavaid8181 said:
If you need a full firmware then you should visit official honor site..
Click to expand...
Click to collapse
I can't find any Honor 8 FRD-L09 downloads anywhere on the Huawei sites or Honor sites. They must've removed the downloads just like they did with the Honor 7..
Rayan19997 said:
If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot
Click to expand...
Click to collapse
I get that now and I know how to proceed in the future.
On another note, I got a good UPDATE.APP available but it refuses to install using the dload method because the versions are different. Does anyone know which partition the USERDATA.img file goes to?

You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8

Rayan19997 said:
You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8
Click to expand...
Click to collapse
Thank you for that link, I downloaded it and flashed it, I couldn't find it on any other hihonor site but this French one had it.
Again, thank you, it worked flawlessly installing and it updated instantly. You saved me from a lot of worrying and anxiety about breaking my friends phone lol.

I'm really glad to read that dude

thanks for the firmware been looking for it for very long!
btw you just saved another honor 8

dload method, no firmware file for Nougat i download is valid!

I need help! I often softbrick my device, but can be fixed by using official 6.0 update.app However updating back to emui 5 takes way too long. But every firmware i download from huawei firmware finder isn't valid for dload for some reason! Help!

Did you already tried with firmwares listed as "FullOTA-MF-PV" available on hwmt.ru site, section firmware database? The Point Version is a firmware that must work while you're executing a dload method flash, the safest usually.
What's your build number? I'll provide a valid firmware to use with dload method.

BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind

Use team mt tool extract update.app from firmware and use Huawei extracter to provide required file

Filo 97 said:
BLN-L21C432 but i didnt see any MF-PV for b360+ so i dont think there are... that, or i am blind
Click to expand...
Click to collapse
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.

RedSkull23 said:
Yeah, latest is B360, EMUI 5. Dload it and then update regularly to latest build, B371.
Click to expand...
Click to collapse
Which of the two .zips?

Filo 97 said:
Which of the two .zips?
Click to expand...
Click to collapse
The biggest one with dload method first of all, then the other two dload too (or flash by TWRP)

TWRP says command unknown, and how am i supposed to flash the second one? (There is no third file) Do i dload big one, then boot to EMUI, then shutdown, extract SD, switch dload folder, and install the second?

Refer to this guide https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240

i have also same issue with my honor 6x not working dload installing failed on 5%

shehroz71 said:
i have also same issue with my honor 6x not working dload installing failed on 5%
Click to expand...
Click to collapse
Did the failure brick your phone? or the phone just reboots itself normally? are you sure that your firmware is approved first for installtion before you apply it? (you can know this using Firmware Finder by checking if it's approved first or not for installation by Huawei)

Stock firmware

Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.

iconius said:
Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.
Click to expand...
Click to collapse
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader

ScardracS said:
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader
Click to expand...
Click to collapse
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!

iconius said:
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!
Click to expand...
Click to collapse
Search hurupdater and you'll find the answer

ScardracS said:
Search hurupdater and you'll find the answer
Click to expand...
Click to collapse
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me

Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone

iconius said:
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me
Click to expand...
Click to collapse
Use eRecovery

ScardracS said:
Use eRecovery
Click to expand...
Click to collapse
When i enter erecovery i get a message: "data partition severely corrupted. To reset your device, please format the data partition".
Should i do it, or do i try something else?
Thanks a LOT for your help!

bumbi99 said:
Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone
Click to expand...
Click to collapse
I am running OpenKirin Omni rom alpha 5.2. Do i just enter erecovery and wipe data partition?
Thank for help!

Format data
Inviato dal mio FRD-L09 utilizzando Tapatalk