So, the thing is im pretty new here.
I had Marshmallow on my 6x, i had TWRP, then I performed a wipe of every partition (except of Micro SDcard) and installed Resurrection Remix.
It was installed, there was a little Problem, so i wanted to go back to the Stock Firmware.
I wiped it again, and installed the first one of the update.app's (from http://www.stechguide.com/update-honor-6x-to-android-nougat/ ) via dload Method.
Then the second update.app was installed via dload Method. I wanted to reboot the device, but now it doesn't boot into Nougat. Instead it boots to eRecovery.
And now I'm stuck here, no OS and no TWRP (problably got removed by first Nougat update.app)
So is there any way I can install a new OS? or maybe wipe the system partition for a clean start?
THX in advance,
-Paul
Man I don't know. Can you connect via ADB to a pc ?
If so you can try to install MM update B151 full from http://hwmt.ru/oth/HWFF/info/view.php?find_model=
Nollie8969 said:
Man I don't know. Can you connect via ADB to a pc ?
If so you can try to install MM update B151 full from http://hwmt.ru/oth/HWFF/info/view.php?find_model=
Click to expand...
Click to collapse
I'm going to try that, not sure which command I should use... (newbie xD)
Am i right with
adb devices
Click to expand...
Click to collapse
to check if my phone connects, and
adb reboot bootloader
Click to expand...
Click to collapse
to boot my phone to bootloader, finally
fastboot flash system thefullupdatefile
Click to expand...
Click to collapse
?
Depends on your system. If you talk about commands I guess you're on Windows (I'm not). Then search the web or wait for others to respond.
Nollie8969 said:
Depends on your system. If you talk about commands I guess you're on Windows (I'm not). Then search the web or wait for others to respond.
Click to expand...
Click to collapse
nope im on mac, but you cant flash zip files via fastboot, i also tried to install it via dload and it says Software install failed. you know anything else?
You have to flash it with fastoob using terminal and comands if u r under macos
pt_2001 said:
So, the thing is im pretty new here.
I had Marshmallow on my 6x, i had TWRP, then I performed a wipe of every partition (except of Micro SDcard) and installed Resurrection Remix.
It was installed, there was a little Problem, so i wanted to go back to the Stock Firmware.
I wiped it again, and installed the first one of the update.app's (from http://www.stechguide.com/update-honor-6x-to-android-nougat/ ) via dload Method.
Then the second update.app was installed via dload Method. I wanted to reboot the device, but now it doesn't boot into Nougat. Instead it boots to eRecovery.
And now I'm stuck here, no OS and no TWRP (problably got removed by first Nougat update.app)
So is there any way I can install a new OS? or maybe wipe the system partition for a clean start?
THX in advance,
-Paul
Click to expand...
Click to collapse
Same happened to me once !!
Flash the twrp recovery . Wipe em all .
Then put mm dload in internal via MTP .
Then flash the stock recovery .
Then install the dload . Then wipe the system from stock recovery and you are good to go
SmartDrevil said:
Same happened to me once !!
Flash the twrp recovery . Wipe em all .
Then put mm dload in internal via MTP .
Then flash the stock recovery .
Then install the dload . Then wipe the system from stock recovery and you are good to go
Click to expand...
Click to collapse
Ok i put MM in dload on Internal, but I dont have the stock recovery image you now where i can download it?
pt_2001 said:
Ok i put MM in dload on Internal, but I dont have the stock recovery image you now where i can download it?
Click to expand...
Click to collapse
You can extract the stock recovery from
UPDATE.APP using Huawei Update App Extractor :good:
SmartDrevil said:
You can extract the stock recovery from
UPDATE.APP using Huawei Update App Extractor :good:
Click to expand...
Click to collapse
Hello SmartDrevil..
I have indian honor 6x B132 device.... i was on emui 4.1 mm then i updated emui 5.0 beta N through firmware finder app ....i m facing lots of bugs.. now i want to install official stock mm rom on my device... What should i do ? Plz help me !!
there are 2 recoveries one is recovery and other is recovery2 which one to extract and how to flash ?
i m on nougat emui 5 bricked no os isntalled just fastboot and twrp
i m not able to flash stock recovery
narshi shukla said:
i m not able to flash stock recovery
Click to expand...
Click to collapse
Dload method is your friend
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @shashank1320 @RedSkull23
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
narshi shukla said:
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @[email protected]
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
Wanna fix the nrd test keys and unlocked stuff.
I can help and this will vanish too :good:
link to download full firmware(bln 22 b340)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v94286/f1/full/update.zip
if ur update fails
download this file and flash again
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
---------- Post added at 06:33 AM ---------- Previous post was at 06:32 AM ----------
shashank1320 said:
Wanna fix the nrd test keys and unlocked stuff.
I can help and this will vanish too :good:
Click to expand...
Click to collapse
yes how to fix this?
narshi shukla said:
link to download full firmware(bln 22 b340)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v94286/f1/full/update.zip
if ur update fails
download this file and flash again
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
---------- Post added at 06:33 AM ---------- Previous post was at 06:32 AM ----------
yes how to fix this?
Click to expand...
Click to collapse
2nd link is mostly not required. 1st will fix 99.9999%
narshi shukla said:
THANKS @[email protected]
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
Glad that you've finally restored a working OS dude, you're welcome.
narshi shukla said:
yes it helped me a lot of thanks to @shashank1320
he given his valuable time and personally assisted me on telegram
what is the ultimate solution of all type of brick is dload method
many people says it works with internal storage ,works with twrp intstalled need to put this or this file into dload folder etc etc
my experience is this
NONE OS METHOD WORKING NEITHER FASTBOOT FLASHING ANYTHING NOR TWRP RESTORING BACKUP OR FLASHING ANYTHING
FINALLY I TRIED DLOAD METHODS BUT IT DIDNT WORKED AT THAT TIME
MISTAKE WHAT I WAS MAKING WAS THAT I WAS USING FIRMWARE WHICH WAS ON OFFICIAL SITE OF HUAWEI
LATER @shashank1320
GUIDED ME TO DOWNLOAD THE FIRMWARE EXACTLY SIMILAR TO MY PHONES FIRMWARE THIS IS MUST IT SHOULD MATCH WITH YOU FIRMWARE
THEN PUT ALL THE FILES UNDER DLOAD FOLDER(THERE WERE 4 FILES)
SOME SAYS JUST PUT UPDATE.APP BUT FORM ME IT DID NOT WORKED SO I PUTTED ALL 4 FILES UNDER DLOAD FOLDER CLEANED ALL OTHER FOLDERS,FILES FROM MY SD CARD THERE WERE ONLY DLOAD FOLDER
SO I SHUT DOWN PHONE THEN PRESSD ALL THREE BUTTONS TOGETHER(POWER +VOL UP + VOL DOWN) AND AFTER STUCKING ON HONOR SCREEN FOR 5 6 MINUTES ITS STARTED FLASHING
AND I GOT MY PHONE WORKING AGAIN
HOWEVER MY BOOTLOADER AND FRP IS STILL UNLOCKED
TWRP IS STILL THERE I DONT HAVE STOCK RECOVERY AND BUILD NUMBER IS NRD90M TEST KEYS
BUT IT DONT MATTER FOR ME NOW
THANKS @shashank1320 @RedSkull23
BOTTOM LINE IS DLOAD METHOD IS ULTIMATE SOLUTION IF YOU DO IT CORRECTLY.
Click to expand...
Click to collapse
I have a bricked Honor 6x BLN-L24C567 (USA MODEL), i've tried the dload method with the oficial files update_full_BLN-L24_hw_usa.zip and update.zip , i get "software install failed!". Can you point me to the right files for mi device, thanks in advance.
vcetina said:
I have a bricked Honor 6x BLN-L24C567 (USA MODEL), i've tried the dload method with the oficial files update_full_BLN-L24_hw_usa.zip and update.zip , i get "software install failed!". Can you point me to the right files for mi device, thanks in advance.
Click to expand...
Click to collapse
Which firmware number you were on before issue??
Related
Hello!
I own a FRD-L19C432 device loaded with B120 FW, TWRP flashed to erecovery, the recovery partition is stock (?) since I haven't flashed anything on it and it is also rooted.
A few days ago, I got the notification of the availability of B131 update. According to some info I've read over the web, the erecovery isn't/wasn't used for anything, so I tried my luck and proceeded with updating operation from UI. It booted to recovery, failed to install, showed some error and booted to OS, that stills on B120.
Introduction made, the question is:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
If so, where can I get the B120 stock recovery and erecovery? I'm not finding it while using the Firmware Finder app by Team MT.
Hope you can give some help.
Tks,
RM
you can extract the recovery.img using huawei update extractor and then flash via adb or the multitool
jkccl9 said:
you can extract the recovery.img using huawei update extractor and then flash via adb or the multitool
Click to expand...
Click to collapse
Thank you for trying to help, but that's not what I'm asking in first place:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
Click to expand...
Click to collapse
Thank you.
RM
omartins said:
Thank you for trying to help, but that's not what I'm asking in first place:
Thank you.
RM
Click to expand...
Click to collapse
well you have to unroot and install stock recovery before being able to update
jkccl9 said:
well you have to unroot and install stock recovery before being able to update
Click to expand...
Click to collapse
Stock recovery from B120, right? If so, where can I find this recovery since I'm not finding the full B120 FW zip?
omartins said:
Stock recovery from B120, right? If so, where can I find this recovery since I'm not finding the full B120 FW zip?
Click to expand...
Click to collapse
Try huawei firmware Updater by team mt (can't remember full name) to search for the last update and extract using tool from post 1 ^^
omartins said:
Hello!
I own a FRD-L19C432 device loaded with B120 FW, TWRP flashed to erecovery, the recovery partition is stock (?) since I haven't flashed anything on it and it is also rooted.
A few days ago, I got the notification of the availability of B131 update. According to some info I've read over the web, the erecovery isn't/wasn't used for anything, so I tried my luck and proceeded with updating operation from UI. It booted to recovery, failed to install, showed some error and booted to OS, that stills on B120.
Introduction made, the question is:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
If so, where can I get the B120 stock recovery and erecovery? I'm not finding it while using the Firmware Finder app by Team MT.
Hope you can give some help.
Tks,
RM
Click to expand...
Click to collapse
It's weird and sad to hear that you flashed twrp to erecovery.
Let me explain u briefly what erecovery does . when u use dload method (while flashing an update.app) , erecovery extracts all .img and .bin files and later it flashes the each file (image files) to its respective partition .
In ur case. The normal stock recovery flashed the update.zip which was included in the script . but it failed to extract update.app in the update.zip and finally output u got is error.
Solution:
The only solution for this problem is ..
Download a full update package of stock ROM...
Extract Update.app (use huawei update extractor) and then find erecovery.IMG
Install adb and fastboot drivers ..
Put your phone in fastboot mode .
Connect to PC ..
In the terminal (command prompt) , type this command and hit enter .
fastboot flash erecovery erecovery.img
(From here u can reinstall the update.zip ) if it fails .
And then try to shutdown the phone , later put full update.app in dload folder ..
Use the 3 button combination to install full package of update.app and thats it .
It reboots to stock again .besure to take a backup of your data before attempting above step . after everything done check for update from settings and install it normally
hello!
Thanks for a proper answer
At the moment I'm stuck (paused) at the TWRP backup operation, since I don't seem to be able to perform a full back to internal storage (with the previous NEXUS phones I owned it was possible...) I need first to get an USB-C adapter in order to use USB OTG to perform the safety backup.
After That I'll flash B120 stock recovery and erecovery, unroot and dload the new FW version.
Meanwhile, another question: Using the FW Finder APP from Team MT on Windows it gets a FRD-L19C432B131 result, while on the Android version of the same AP it only finds B130, not B131 (?). On the other hand, I can only find the B120 full FW over Android APP, and don't seem to find it while using Windows... Any idea why this occurs?
RM
Hello!
Task accomplished! TWRP full backup made, flashed stock recoveries from B120 and after that flashed B131 update.app though dload method.
Everything went OK except for the fact I got bootloader relocked after the second flash. I miss the simplicity of the Nexus devices...
With the TWRP backup made before I was able to restore most of the definitions though. It would be nice to digg a workaround to flash update.app without getting bootloader relocked...
I wonder if extracting boot, system and recoveries IMGs and flash all this through fastboot wouldn't work!? Did anyone tried?
RM
hello, i will try to explain my problem :
My honor was bricked by an error of flash.
I have "repair" it by a way found here on xda : flash boot.img, cust, recovery, system, and after i have could make the update by dload.
Then all was ok under the firmware LO9C432B131.
But now, i can't update to B360...
Before my brick, i had the ota update to B360... but now i have nothing....
If i try the update by dload, it says : "problem compatibility"
I have downgraded to B120 and ota update was good for B131. But nothing for B360
If someone can explain me...thank you so much (actually the phone is no rooted and relocked)
Hi there. Go through the entire rollback procedure and you will be fine: https://forum.xda-developers.com/honor-8/how-to/guide-downgrading-unlocked-rooted-twrpd-t3549281
Put the update.app file in a folder called dload on a SD card. If you haven't got one, flash twrp in fastboot and when in twrp you'll be able to transfer them to internal storage from your pc. Then follow the instruction above. That's how I unbricked mine. Good luck.
sysak said:
Hi there. Go through the entire rollback procedure and you will be fine: https://forum.xda-developers.com/honor-8/how-to/guide-downgrading-unlocked-rooted-twrpd-t3549281
Put the update.app file in a folder called dload on a SD card. If you haven't got one, flash twrp in fastboot and when in twrp you'll be able to transfer them to internal storage from your pc. Then follow the instruction above. That's how I unbricked mine. Good luck.
Click to expand...
Click to collapse
I don't think you understood what OP is saying. He successfully rolled back to MM but he cant go to Nougat anymore.
takichiman said:
I don't think you understood what OP is saying. He successfully rolled back to MM but he cant go to Nougat anymore.
Click to expand...
Click to collapse
Yes, but I believe the issue comes from manual flashing of partitions. I have also tried that when my phone was dead and the recovery and eRecovery always threw "package incompatible" error. I think restoring the entire file system to factory condition (which happens during the rollback process) is the sure best way to fix all issues.
Thanks for your answers,
I finally got the update with the charlie app...(not easy this method !)
But now i don't know if ota will be ok...
I will perhaps do the rollback as you said to restore the entire file system...
Hey guys ive been stuck on NRD90M test keys for a while i have a nxt-l29 i installed nougat manually via twrp and the build number was NRD90M ive tried dload for several firmwares but all fail at 5% the roll back packages wont work either if anyone can help i would appreciate " bluetooth doesnt work and other major issues like app crashing and random freezing "
thanks in advance
nad.j said:
Hey guys ive been stuck on NRD90M test keys for a while i have a nxt-l29 i installed nougat manually via twrp and the build number was NRD90M ive tried dload for several firmwares but all fail at 5% the roll back packages wont work either if anyone can help i would appreciate " bluetooth doesnt work and other major issues like app crashing and random freezing "
thanks in advance
Click to expand...
Click to collapse
You need roll back package for L29. It will be around 90 mb. Put it in dload folder in sdcard. Then go to dialer and type *#*#2846579#*#* and then select software upgrade. It will reboot and will undergo that process or you can do that three finger process. Once it is done you can reboot back to your OS. This time put the B1xx or B3xx firmware in dload folder and try to do that again. It will go back.
In my case I went back from L29C432B560 to L29C432B180 doing this way. I am saying this from my personal experience. Key here is the rollback package from Huawei. It is there in one of the threads or you can google Huawei rollback package. Once you get that you resolve your issue.
Another thing I observed is locked bootloader.
Hope it works out for you.
Samavb said:
You need roll back package for L29. It will be around 90 mb. Put it in dload folder in sdcard. Then go to dialer and type *#*#2846579#*#* and then select software upgrade. It will reboot and will undergo that process or you can do that three finger process. Once it is done you can reboot back to your OS. This time put the B1xx or B3xx firmware in dload folder and try to do that again. It will go back.
In my case I went back from L29C432B560 to L29C432B180 doing this way. I am saying this from my personal experience. Key here is the rollback package from Huawei. It is there in one of the threads or you can google Huawei rollback package. Once you get that you resolve your issue.
Another thing I observed is locked bootloader.
Hope it works out for you.
Click to expand...
Click to collapse
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?
nad.j said:
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?
Click to expand...
Click to collapse
Which rollback are you using?
nad.j said:
hey man the *#*#2846579#*#* doesn't open anything on my phone and i tried dload to rollback using the volume up volume down and power and i get installation failed any other tips ? i downloaded alot of softwares nothing seems to work can u give the the specific software you used ?
Click to expand...
Click to collapse
Go to this link
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
And select the last one L29C900B500
That is the one I used.
If that code doesn't work then try the 3 finger rule
After you do with this rollback package
You will once again come back to nougat
You can check the build number if the process is successful.
Then you have to dload again to B180 or B3xx
Hope this works for you
Samavb said:
Go to this link
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
And select the last one L29C900B500
That is the one I used.
If that code doesn't work then try the 3 finger rule
After you do with this rollback package
You will once again come back to nougat
You can check the build number if the process is successful.
Then you have to dload again to B180 or B3xx
Hope this works for you
Click to expand...
Click to collapse
i downloaded the c900b500 and when i tried to install it gave me incompatible update... failed at 5%
dexz said:
Which rollback are you using?
Click to expand...
Click to collapse
i used the nxt l29c900b500 and failed at 5% every time it gives me incompatible update ...
nad.j said:
i used the nxt l29c900b500 and failed at 5% every time it gives me incompatible update ...
Click to expand...
Click to collapse
i get this
nad.j said:
i get this
Click to expand...
Click to collapse
What's your original region?
Did you try to install update_data.zip again via twrp?
dexz said:
What's your original region?
Did you try to install update_data.zip again via twrp?
Click to expand...
Click to collapse
its m.e.a
and tried to install using twrp but i get alot of failed nd unable to mount etc
nad.j said:
its m.e.a
and tried to install using twrp but i get alot of failed nd unable to mount etc
Click to expand...
Click to collapse
Which twrp version are you using?
Which partition was failed to mount?
Did you format data before install?
dexz said:
Which twrp version are you using?
Which partition was failed to mount?
Did you format data before install?
Click to expand...
Click to collapse
im using twrp 3.0.3-0 nd all format attempts fail
nad.j said:
im using twrp 3.0.3-0 nd all format attempts fail
Click to expand...
Click to collapse
Please use twrp 3.0.2 (Nougat) . Twrp 3.0.3 is broken.
You can get it from here. https://forum.xda-developers.com/ma...ot-nougat-mate-8-phh-superuser-t3570898/page2
dexz said:
Please use twrp 3.0.2 (Nougat) . Twrp 3.0.3 is broken.
You can get it from here. https://forum.xda-developers.com/ma...ot-nougat-mate-8-phh-superuser-t3570898/page2
Click to expand...
Click to collapse
should i format then install the rollback
nad.j said:
should i format then install the rollback
Click to expand...
Click to collapse
Don't think it will make any difference. You may try to install update.zip (EMUI 4.0) via twrp.
Just checking. Is your FRP unlocked?
dexz said:
Don't think it will make any difference. You may try to install update.zip (EMUI 4.0) via twrp.
Just checking. Is your FRP unlocked?
Click to expand...
Click to collapse
i formated the device and using twrp 3.0.2 tried to install rollback pack and the 6.0 software but i kept getting i kept getting this "could not find meta inf com google android update binary in the zip file huwaei " and then i tried to format system then flash 6.0 still got the same error and now i re installed the nrd90m since it got stuck on the huawei logo and still nothing is working out
nad.j said:
i formated the device and using twrp 3.0.2 tried to install rollback pack and the 6.0 software but i kept getting i kept getting this "could not find meta inf com google android update binary in the zip file huwaei " and then i tried to format system then flash 6.0 still got the same error and now i re installed the nrd90m since it got stuck on the huawei logo and still nothing is working out
Click to expand...
Click to collapse
Can you boot to bootloader and check if FRP is unlocked or lock?
Make sure your original firmware (6.0) is full not ota.
dexz said:
Can you boot to bootloader and check if FRP is unlocked or lock?
Make sure your original firmware (6.0) is full not ota.
Click to expand...
Click to collapse
whats frp ?
How to Rollback from Nougat to Stock - Mate 8 - L29
nad.j said:
i downloaded the c900b500 and when i tried to install it gave me incompatible update... failed at 5%
Click to expand...
Click to collapse
I had the same problems.
option 1
I downloaded stock B560 zip files
flashed it in TWRP
next I locked the bootloader
now the dload to rollback - worked. buildnumber - changed
then another dload to B180 to go back.
after that I did dload to B190
updated to B560 using system update. then I flashed kangvip B577 and its all good now.
my phone was debranded to L29c432 so I used these files.
you have to get the right set of files for your phone model especially stock firmware.
roll back package from here
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
locked bootloader and stock recovery did the trick for me.
hope it works out for you. :good:
nad.j said:
whats frp ?
Click to expand...
Click to collapse
You can change by switch off your phone then press volume down and plug in your usb cable. It will bring you to bootloader mode. From there it will tell you bootloader and FRP status
Hello y'all, i issued a problem tomorrow by rooting BLN-L21C432, i unlocked bootloader with no problem, when was time for flashing recovery, i flashed the boot into the recovery and issued a problem in the dev options and security. Cuz of that, i can't access to adb, hisuite hdb to backup, and can't install extern apps without autorizations.
I tried all night long to resolve but no way, add to that the fact i've got a very very low connexion so 3-4h to load an update.zip.
So i downloaded b370, no way i can't use the dload method, fail at 5%. Same issue with b369. Tried to flash manually system boot and recovery by extracting update.app, no result, it's same. Tried to Unbrick via multi-tool, i use it on honor 7, but there's no cust image in update.app.
Build number is normal, C432B365.
I don't know what to do now, it's 10 hours i'm losing my minds with that phone. Please heeeelp :crying:
From which firmware ? Is it good if i flash boot and recovery from B360 ?
Edit : Actually the phone is in B365, it would be better if i try to dload from it right ?
I read that unlocked bootloader could block an update, is that true ?
Rommco05 said:
No u need to flash boot and recovery from actually firmware. After when u flash right boot and recovery (from B365). Now u try installing this firmware us it B360. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v82485/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L21_hw_eu/update_data_full_BLN-L21_hw_eu.zip
You can use dload method or over Firmware Finder
Click to expand...
Click to collapse
I'm gonna download it and come back later, thank you very much
Hi guys I came over the problem by only flashing the original boot that was B365, it was si obvious, thanks to you for helping me bro, real thank ?
Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.
iconius said:
Hello,
I have Honor 8 frd-l09, that was running c432 b521 version of EMUI 8.0. I want to go back to stock but i do not know which files should i download. On pro-teammt website are many donwload link for my model:
... update.zip
... update_full_FRD-L02_hw_eu.zip
... update_full_FRD-L19_hw_eu.zip
... update_data_full_public.zip
... update_full_FRD-L09_hw_eu.zip
Those are all the links when i click "filelist". It is obvious that i do not need to download FRD-L02 and FRD-L19, because i have FRD-L09. Should i download just that one or do i also need "update.zip" and "update_data_full_public.zip"?
Thanks for the answers.
Click to expand...
Click to collapse
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader
ScardracS said:
You need update and update_data too
Anyway I suggest to you to use eRecovery, but that will take you to Android 7 and lock back your bootloader
Click to expand...
Click to collapse
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!
iconius said:
Thanks for the reply.
I downloaded all of them, but i do not know what should i do with them. "update.zip" constains "UPDATE.APP" and also "update_full_FRD-L09_hw_eu-zip" constains UPDATE.APP. I looked at some tutorials and they just put "UPDATE.APP" in the dload and flash it. I have 3 zips and 2 "update.app" files.
Could you help me get to stock and describe what i need to do.
THANKS A LOT!
Click to expand...
Click to collapse
Search hurupdater and you'll find the answer
ScardracS said:
Search hurupdater and you'll find the answer
Click to expand...
Click to collapse
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me
Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone
iconius said:
The problem with huru is that i do not have TWRP recovery, because i am running OpenKirin rom. I wanted to flash twrp but it did not work and now i do not have a recovery. When i boot into recovery i just get Func NO : 11 (reovery image), Error NO : 2 (load failed!).
What could i do?
Thanks for helping me
Click to expand...
Click to collapse
Use eRecovery
ScardracS said:
Use eRecovery
Click to expand...
Click to collapse
When i enter erecovery i get a message: "data partition severely corrupted. To reset your device, please format the data partition".
Should i do it, or do i try something else?
Thanks a LOT for your help!
bumbi99 said:
Hi, you can safely use your erecovery as it will download the stock b562 Oreo firmware. It won't relock your bootloader because you are already on Oreo. It used to lock it when you went back from Oreo to nougat. You can trust me as I have used this method quite a bit of times to save my half bricked phone
Click to expand...
Click to collapse
I am running OpenKirin Omni rom alpha 5.2. Do i just enter erecovery and wipe data partition?
Thank for help!
Format data
Inviato dal mio FRD-L09 utilizzando Tapatalk