Related
Hello guys.
I have a xperia Z3 from VIVO and flashed a rom from OI, everything went well on flashing the rom but after it finished i noticed that i lost my 4G. When i search for network there have a TIM BRASIL LTE but it won't let me register on it.
Do anyone know how to solve that?
Thanks!
Input the correct apn settings from your carrier
LitoNi said:
Input the correct apn settings from your carrier
Click to expand...
Click to collapse
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Info
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
just test firmware of another region
(UK firmware for example)
:good:
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Geeks Empire said:
just test firmware of another region
(UK firmware for example)
:good:
Click to expand...
Click to collapse
Geeks, there have no other region for my version of the Z3, also i am trying to flash many other rooms from my region and all of them results in a error during the flash... Blank error, no description.
LitoNi said:
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Click to expand...
Click to collapse
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
DiegoManBR said:
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
Click to expand...
Click to collapse
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
LitoNi said:
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
Click to expand...
Click to collapse
Lito, now i will complicate a little bit more then. First, the model number of my mobile is D6646 from Brazil with DTV.
Also, i tried to flash the Vivo Baseband and it was worse, i did not install any baseband from USA, just from Portugal.
I tried that on the keyboard, but when i chose USA band i just can't even register on any TIM network.
Also, i tried to flash the original rom, but i can't flash any other firmware apart from Oi. I get a blank error line on flashtool for every other rom i tried to install, so it's even worse
Feel the challenge.
Thanks again for all your help.
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
LitoNi said:
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
Click to expand...
Click to collapse
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
DiegoManBR said:
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
Click to expand...
Click to collapse
that is extremely weird, never had such issues with any of my android phones. make sure data roaming is not on, the carrier shouldnt be able to charge you if you disabled data
Also, make sure the FTF files youve made with xperifirm and flashtool are correct, like not including the TA files etc..., i would advise you redownload those FTF files and try again, also make sure you have the latest flashtool available.
at this point, you are probably better seeking for a developer or someone who can read codes, make a logcat and see if the flashtool thread is available and ask there. Aside from the FTF files, you are better off asking the carrier why they are still able to charge you in such way. Sorry man, this is as far I can aid you in this matter. GL bud!
After flashing an international stock firmware on a chinese phone I've lost Imei and band so the phone can do anything but detecting my sim card.
The firmware was flashed via bootloader.
Is there something I can do? Are there possibilities that I've lost the EFS folder and the phone is gone?
After installing a custom ROM on my galaxy s6 it would no longer recognize my SIM card. I did wipe every option in TWRP recovery before flashing the ROM which might have something to do with the issue. The phone states "No SIM Card - No Service" in the top left of the lock screen, it also wont let me call any numbers to edit things in the phone. I have done some research and it sounds like I have wiped the sim and lost the IMEI/EFS data and therefore no longer have access to my sim. I was wondering if there was any possible fix or should I just send it off to Samsung to get repaired?
Did you back up the EFS partition, and put it somewhere safe? If not, you have a paperweight.
Repair won't be covered under warranty.
Sent from my SM-G920F using Tapatalk
Unfortunately I didn't back up the EFS partition. Situation is looking bad. :l
Try dialnig *#06# and see does it shows IMEI and sn, alo try *#0011# select stack 1 and check whether IMEI is OK, or NG.
Also what does it say in phone settings under baseband? Do you have mobile networks menu in settings?
You can try Smart Switch emergency initialization with sn of the phone if IMEI is ok (it will install latest stock fw for your phone) and see if that helps.
When I typed in "*#06#" The SN number was shown however the IMEI number was not. When I typed in "*#0011#" There was nothing but blank spaces separated by grey lines, I tried selecting row 1 however nothing happened. My base band version is "Unknown" listed under settings. I do however have the network settings listed in settings. In Smart Switch when I try to run the device initialization it states that my s6 "doesn't support initialising". I have flashed three different downloads of the stock rom to my phone using ODIN and have had no luck with any of them.
well Smart Switch always says that S6 is not supported, but initialization can be done anyway, just dont connect the phone until it asks you to do so, instructions below:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
What is your model anyway, do you know which region fw was originaly on the phone, and which sv rev is shown in the download mode?
does in recovery mode says anything about DRK?
Unfortunately Smart Switch says that "'SM-G920F' does not support initialing. Please contact out service center." Even when I have entered the correct S/N and device model, as well as not plugging in the phone. My device model is the SM-G920F. I don't know the original region FW that was originally on the phone, however it was purchased in the UK and that is where I am have been ever since I bought the phone. The SWREV is: "B:3 K:2 S:2" in download mode. I currently have TWRP recovery installed so is there a place for me to search for the DRK in TWRP? Or should I re-flash the stock recovery using Odin?
that is weird, I reinitialized my g920f many times without any issue. DRK error is usually shown in stock recovery. does the phone boots up with stock fw, and are you using any custom kernel?
i got the same problem when I flashed xtrolite and alexis custom ROM on my S6, both ROM after flashing I got no service.
But I did a full stock backup in TWRP.
baseband unknown means that there is a problem with modem part of fw. and I dont know what fw you flashed. you said that you tried to flash stock, but it doesn`t work, but a little more details would maybe make a difference, like which fw, and what exactly is happening, what does about the phone menu says.
So far, since baseband is unknown I would try to flash modem fw with odin (for exact fw that is in the phone). before that usb settings should be set to CP, by dialing *#0808#
or if you decide tu run custom fw, you can always try asking in that rom thread, maybe someone already had issues like that with that rom and fixed them, or the developer of that rom can help fix it.
Boot your s6 to download and flash stock rom via odin from samsung it maybe work
I have Samsung Galaxy S3 GT-I9300. When the google drive app was downloading from google play, my phone went off due to poor battery. Later when I tried to turn it ON, it has been getting stuck in the boot. So I decided to reinstall my custom ROM. Being busy with my baby, toddler, household chores and job, I gave it to my brother to flash the ROM. After a while, I noticed that my sim was bricked.
It says "Emergency Calls Only", has fake IMEI but working signal.
We did not backup the efs. I tried searching all the methods like modem installation, CSC, baseband verions, IMEI re-write, Kies Upgrade and Initialization, other people's efs restore, etc. But the problem is unchanged. Some of the followed method might have failed for not having proper knowledge like IMEI re-write tool works on specified chipset, etc.
What we noticed is that using different baseband version toggles from having network signal or no signal.
Kies shows more than four firmware versions and no other details like CSC, etc.
How do I clean up all these especially to have SIM working on my phone?
I appreciate you assistance to be brief and clear to understand steps than sending links. Because my time is stress-fully short.
Hi !
There is some confusing info in your post
What do you mean with it has fake IMEI " ? Have you changed it ?
You say that you have a working SIM on certain basebands , is this happening on a custom rom or stock ?
Have you tried to flash a stock firmware as I see that you tried to flash "your custom rom " ?
Cheers !
First of all, thank you for your response and interest to assist.
My mobile's IMEI is shown as 004999010640000 which is not original. Can you help me to change it to correct IMEI suitable for my Samsung S3 GT-i9300 chipset, if that helps in enabling sim to connect to a network? I think changing method only masks the IMEI?
I have tried flashing stock firmware and also Kies Upgrade and Initialization.
I have also changed baseband version installation on stock ROM too. I don't know which baseband is correct to keep.. for my country India or in the country where my mobile is manufactured, incase that's locking sim accessibility? Some baseband bought signal and detected the network operator name, but the message still says "Emergency Calls Only" and is unable to connect to a network.
I presume this problem arose when installing custom ROM from TWRP recovery and it messed up with efs partition?
I had successfully flashed custom ROM many times before without this problem. I think there's some next step to follow to bring back the working sim like I heard of installing modem. I did just try installing modem but same problem as my baseband is already bringing signal.
I had tested my phone from sim unlock app and found out that CSC is locked and it limited specified MCC and MNC numbers. Is this hindering connection to Indian mobile network? Or corrupt efs? Or missed to manually install something?
Bump.
I recently bought a used Samsung Galaxy S10 (SM-G973F).
At first glance the phone was in excelent shape. The SIM Card was connecting to the mobile network, and calls, internet connection, etc was OK.
But then, I found out that the phone had been rooted. Probably, by the seller. In pannic, I rushed to unroot flashing the stock Rom.
Here what I did:
1- Forgot to check my precisly CSC code and assumed ZTA (cause I'm from Brazil, and the phone is from carrier "Claro")
2- Downloaded the stock rom using Frija
3- Using Odin 3.14.1 flashed the device.
The previous rooted system was on Android 10 and One UI 2.5. With this new rom went to Android 11 and One UI 3.0.
The problem:
The phone recognizes the SIM Card. But it simply doesn't connect to the network. When I try to make a call it says: " not registered on network"
The phone DO recgonizes the SIM Card. On the SIM Card Manager shows my carrier name (Vivo) and my phone number. Also, the SIM app is showing on the app list.
Things I tried:
Rebooting the phone
Changin the SIM Slot
Testing the SIM on another device to ensure it was working
Checked if the IMEI wasn't missing/undefined. It is not, the IMEI appears to be untouched
Checked if the IMEI had been blacklisted. It's not.
Flashed SEVERAL different stock ROMS with different CSC (ZTO, ZTA, ZVV)
Try to manually select the network. This also throws an error saying "error while searching for network"
I'm really desperate and don't know what to do anymore.
No one have a clue either? :C
Look inside here:
How to Fix 'Not Registered on Network' on Android
Here is how to fix 'Not Registered On Network' error on Android. Mostly error occurs on Samsung phones, but this solution works for all android phones.
www.android-recovery.net
Wow,
This is exactly like my S10 right now.
At first, all is good, the signal was great, all working well, except cant connect to samsung pass and samsung health because it was root.
then i brought to sellular shop service, to flash the phone.
Then, “not registered to network” happened. The signal ok, the phone able to read dual simcard, but “emergency call only” and if i try to search network manually, “error while searching for network”
And the sellular shop service have no idea how to fix after they reflashed and try to fix it for several days.
Have you found any solution to fix your pho?
pls advice…
itupini said:
I recently bought a used Samsung Galaxy S10 (SM-G973F).
At first glance the phone was in excelent shape. The SIM Card was connecting to the mobile network, and calls, internet connection, etc was OK.
But then, I found out that the phone had been rooted. Probably, by the seller. In pannic, I rushed to unroot flashing the stock Rom.
Here what I did:
1- Forgot to check my precisly CSC code and assumed ZTA (cause I'm from Brazil, and the phone is from carrier "Claro")
2- Downloaded the stock rom using Frija
3- Using Odin 3.14.1 flashed the device.
The previous rooted system was on Android 10 and One UI 2.5. With this new rom went to Android 11 and One UI 3.0.
The problem:
The phone recognizes the SIM Card. But it simply doesn't connect to the network. When I try to make a call it says: " not registered on network"
The phone DO recgonizes the SIM Card. On the SIM Card Manager shows my carrier name (Vivo) and my phone number. Also, the SIM app is showing on the app list.
Things I tried:
Rebooting the phone
Changin the SIM Slot
Testing the SIM on another device to ensure it was working
Checked if the IMEI wasn't missing/undefined. It is not, the IMEI appears to be untouched
Checked if the IMEI had been blacklisted. It's not.
Flashed SEVERAL different stock ROMS with different CSC (ZTO, ZTA, ZVV)
Try to manually select the network. This also throws an error saying "error while searching for network"
I'm really desperate and don't know what to do anymore.
Click to expand...
Click to collapse
So, were you able to find a solution for this problem? I also bought a Note 9 N960F/DS recently and found out it was actually a N960N model that was changed to N960F/DS. So I did exactly what you did, I flashed the original stock rom, N960N, but now phone will not connect to network. I also did hard reset, reflash other stock roms, nothing changed. Anybody with insight should please give us some pointers.