Database Info

[Q] no battery pull precludes recovery

I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!

I was stuck rooting on the boot logo too. Had to use odin 3.10 and did "run as administrator". Also if this helps to reboot the stuck phone press vol down+power together until the screen blanks out. If you need to get into download mode, as soon as the screen blanks out, press and hold the Home button ( Don't let go of the vol down and power though ).
Good grief.... the non-removable battery has made these recovery tricks so difficult

thanks twisted_mind. at this point, i only get the blue screen asking me to do smartswitch recovery, and the one thing i CAN seem to do is volDown-power-home and it easily goes to download mode. i have not been able to get to recovery mode no matter what i do (including volUp-power-home, even before this smartswitch message came up after i tried to odin a stock recovery).
so i can still go to dload mode, and stick in a stock rom. the ones i've tried are from sammobile, and a potential issue is that i don't know the exact one to pick (this phone is a demo here in europe and i didn't note the details under settings when it was working). so the ones i try end in an odin FAIL. again, i've also tried odin unchecking auto-reboot, but then the phone is stuck at the very end of dload ("don't turn off target", etc), and i have no way to battery pull, etc.

Instead of holding power to shut off you have to hold power and vol down

jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks

ktetreault14 said:
Instead of holding power to shut off you have to hold power and vol down
Click to expand...
Click to collapse
I have the turquoise screen that says "an error has occurred... use the emergency recovery function in smart switch...". if i do power + volDown there OR when the phone is stuck in download mode after the odin fail, the phone turns off but then comes right back on with the turquoise error screen. i've tried quickly going to the recovery key combo right when or right after the screen goes dark, but to no avail.
I can easily do power +volDown + home and go to dload mode. i just can't get into recovery mode no matter what i've tried so far.
if i could just find a stock rom that wouldn't fail in odin, or something else to use as AP/PDA in odin, i'd be set i think. wish i knew how to do this. hitting nand erase all in odin doesn't do the trick by the way.

ammsamm said:
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks
Click to expand...
Click to collapse
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters: http://www.sammobile.com/firmwares/database/SM-G925F/

jasonastley said:
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters
Click to expand...
Click to collapse
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted

ammsamm said:
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted
Click to expand...
Click to collapse
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.

jasonastley said:
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.
Click to expand...
Click to collapse
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com

ammsamm said:
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com
Click to expand...
Click to collapse
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?

jasonastley said:
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?
Click to expand...
Click to collapse
Actually this is not the link i downloaded the odin from i tried to
Atthach the one i have but faced with the upload limit, even
After ziping and spilting the the odin, upload failed,
So, you better find another odin 3.10.6 a version with all the buttons
are enabled.

S7 won't boot (Stays at the pulsating samsung logo)

Hello XDA friends,
I hope to find a solution for my problem with my Galaxy S7.
I've flashed the newest Version of Android with Smart Switch, but it won't boot to Android. It just starts "Samsung, Powered by Android" then switches to just the Samsung Logo then gets hot and after 5-6 Minutes it vibrates 2 times but nothing is showing on the screen except the Samsung logo.
I tried everything, rebooting it several times, multiple tries with factory reset. Nothing helps.
Hopefully you guys can understand my broken german english.
This is what the Download Mode currently says:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Samsung Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0
RP SWREV: B:1 K:0 S:0

I have a similar issue to this, no fix found yet though.

Flash stock with ODIN 3.12.3

^^^^ Flash stock OS with Odin, if Odin returns with FAIL straight away go into TWRP and format System and Data then flash stock OS

I already tried 7 different stock roms, all have the same problem.
And I cant flash TWRP because the FRP Lock is on. And because I cant boot into Android I am not able to switch it off.

So far, i've tried these firmwares:
Smart Switch - Nope
SM-G930F_1_20170203142713_MOB_fac - nope
SM-G930F_1_20170210110639_6j1nt9xw0b_fac - nope
SM-G930F_1_20170418223200_pf0e8ktcz8_fac - nope
G930FXXU1APB4_G930FVFG1APB2_MOB - nope
SM-G930F_1_20170329175552_qghvj8op9t_fac - nope
SM-G930F_1_20170317121226_ipt5jsw6zo_fac - nope
And on every firmware there is the same problem. Pulsating logo, but nothing happens except the phone gets warm for some time and then cools back down.

DerpyDoom said:
So far, i've tried these firmwares:
Smart Switch - Nope
SM-G930F_1_20170203142713_MOB_fac - nope
SM-G930F_1_20170210110639_6j1nt9xw0b_fac - nope
SM-G930F_1_20170418223200_pf0e8ktcz8_fac - nope
G930FXXU1APB4_G930FVFG1APB2_MOB - nope
SM-G930F_1_20170329175552_qghvj8op9t_fac - nope
SM-G930F_1_20170317121226_ipt5jsw6zo_fac - nope
And on every firmware there is the same problem. Pulsating logo, but nothing happens except the phone gets warm for some time and then cools back down.
Click to expand...
Click to collapse
I see all the firmwares you have tried have been from 2017, so I assume are all Nougat?
Tried an older Marshmallow firmware?
This one is BTU Unbranded United Kingdom MM for G930F
http://updato.com/firmware-archive-select-model?record=2877DF1921A611E6949E0CC47A44B7B2
Also have you tried using CSC rather than CSC_HOME?
Are you using the correct CSC for your device?
Have you tried checking Repartition in PIT section of ODIN?
Finally are you using ODIN 3.12.3 minimum version?

Tried an older Marshmallow firmware? Yes (Stays on the "Samsung powered by Android" logo)
Also have you tried using CSC rather than CSC_HOME? Yes
Are you using the correct CSC for your device? Yes
Have you tried checking Repartition in PIT section of ODIN? Yes
Finally are you using ODIN 3.12.3 minimum version? Yes
So far, no success

Have you got access to a different PC to flash from?
And a different USB cable to flash with?
If not a different PC, try a different USB port, if using 3.0, try 2.0 and vice versa

Tried it on a different pc and on different usb ports, I even tried multiple versions of the rom on multiple ports.
Still no luck

Sounds like it might be time to RMA unfortunately

*Detection* said:
Sounds like it might be time to RMA unfortunately
Click to expand...
Click to collapse
I can't send it back, since I got it from a friend and he had a screen repair from a non-samsung partnered shop.
So the warranty is void :/

I have had this problem in the past.
You need to download Samsung KIES 3
(Version 3.2.16084-2)
Select Firmware Upgrade & Initialization from TOOLS at top of APP.
MAKE SURE YOU CONNECT AND DISCONNECT WHEN KIES TELLS YOU TO.
Make sure you have your exact model (example: my model is SM-G930FD)
Make sure you have your Samsung Serial Number (example: NOT ACTUAL S59K432SLQF).
IF YOU DON'T HAVE SAMSUNG SERIAL NUMBER, YOU MIGHT HAVE IT ON YOUR RECEIPT OR BOX.
IF NOT, PERHAPS YOUR CARRIER CAN GIVE IT TO YOU.
DON'T WORRY ABOUT ANY SMALL SCREENS THAT POPUP AND SAY ANYTHING ABOUT NOT BEING SUPPORTED -OR-
THAT SMART SWITCH IS FASTER.
Eventually you will get to a screen that says
"The device can be initialized to its original settings.
All settings and data will be deleted, and the latest software verison will be installed.
Do you want to proceed with the firmware upgrade and initializastion? (OK CANCEL)
The app will download the firmware and then apply it to your phone.
Do not touch the cable or the phone while the process takes place.
When done, your phone will reboot as a new phone.

thevmax said:
I have had this problem in the past.
You need to download Samsung KIES 3
(Version 3.2.16084-2)
Select Firmware Upgrade & Initialization from TOOLS at top of APP.
MAKE SURE YOU CONNECT AND DISCONNECT WHEN KIES TELLS YOU TO.
Make sure you have your exact model (example: my model is SM-G930FD)
Make sure you have your Samsung Serial Number (example: NOT ACTUAL S59K432SLQF).
IF YOU DON'T HAVE SAMSUNG SERIAL NUMBER, YOU MIGHT HAVE IT ON YOUR RECEIPT OR BOX.
IF NOT, PERHAPS YOUR CARRIER CAN GIVE IT TO YOU.
DON'T WORRY ABOUT ANY SMALL SCREENS THAT POPUP AND SAY ANYTHING ABOUT NOT BEING SUPPORTED -OR-
THAT SMART SWITCH IS FASTER.
Eventually you will get to a screen that says
"The device can be initialized to its original settings.
All settings and data will be deleted, and the latest software verison will be installed.
Do you want to proceed with the firmware upgrade and initializastion? (OK CANCEL)
The app will download the firmware and then apply it to your phone.
Do not touch the cable or the phone while the process takes place.
When done, your phone will reboot as a new phone.
Click to expand...
Click to collapse
I did everything as You and Kies explained, sadly tho this also does not work for me....
This is so weird why is it constantly trying to boot and get stuck at the logo? :/

When you are in download mode, press and hold down volume, Home button, & Power key. When phone goes dark, switch from volume down to volume up, & keep holding power & home. This might get you into stock recovery.
Sent from my SM-G930F using XDA-Developers Legacy app

thevmax said:
When you are in download mode, press and hold down volume, Home button, & Power key. When phone goes dark, switch from volume down to volume up, & keep holding power & home. This might get you into stock recovery.
Sent from my SM-G930F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I can access the recovery, but Wipe/Factory reset also makes no difference. Like i said in my first post

DerpyDoom said:
I can access the recovery, but Wipe/Factory reset also makes no difference. Like i said in my first post
Click to expand...
Click to collapse
You may be able to find a local repair shop by searching through Google. OR-you can try searching for craigslist. Org and your city. Then lookup repair of your phone.
Sent from my SM-G930F using XDA-Developers Legacy app

DerpyDoom said:
I can't send it back, since I got it from a friend and he had a screen repair from a non-samsung partnered shop.
So the warranty is void :/
Click to expand...
Click to collapse
Have you tried flashing each section of the ROM one by one and attempt a boot after each?
Can't really think of anything else, it sounds as if the internal storage is having problems, as mentioned above, a repair shop could be your only hope now, but I already know they'll tell you the motherboard is faulty (even if it is not) unless you know of a reputable shop that doesn't BS customers for £

Try calling Samsung and ask them how much to reflash out of warranty.
It shouldn't be that much....

Samsung s7 root does not work result to bootloops

hi,
I tired root my samsung s7 using this file : CF-Auto-Root-herolte-heroltexx-smg930f.zip using odin but I got a boot loop and an error before boot loop was : "recovery is not seandroid enforcing"
the problem the phone is trying to start now and I can't force it to download mode what should I do it's too much hot

akim24 said:
hi,
I tired root my samsung s7 using this file : CF-Auto-Root-herolte-heroltexx-smg930f.zip using odin but I got a boot loop and an error before boot loop was : "recovery is not seandroid enforcing"
the problem the phone is trying to start now and I can't force it to download mode what should I do it's too much hot
Click to expand...
Click to collapse
You can't use any of the CF auto-root files if you're bootloader is locked. If you are using the US model S7, you can't unlock the bootloader. You'll have to flash back to stock firmware. Download mode = Volume down + home + power. Hold all three down, in that order, until you see the 'custom OS screen' then press volume up. Even if you brick using CF root files, download mode should still work. I have a G930U I tried to flash with CF (a few times before I figured out the bootloader was locked) and I have been able to get to download mode no matter what I flashed, so far.

DragonFire1024 said:
You can't use any of the CF auto-root files if you're bootloader is locked. If you are using the US model S7, you can't unlock the bootloader. You'll have to flash back to stock firmware. Download mode = Volume down + home + power. Hold all three down, in that order, until you see the 'custom OS screen' then press volume up. Even if you brick using CF root files, download mode should still work. I have a G930U I tried to flash with CF (a few times before I figured out the bootloader was locked) and I have been able to get to download mode no matter what I flashed, so far.
Click to expand...
Click to collapse
Hi,
I have a S7 930U that had FRP, I used combination firmware to enable developers mode on, then flashed with several firmware that I found online for 930U, but the phone will boot fully, then reboot within 20 seconds. the vicious boot cycle continues no matter what firmware I put in. I'm thinking I still haven't found the correct firmware for my phone, which is causing the boot loop? Please advise what I should do.
I'm trying to flash again with combination firmware so I can collect all the CSC and related details so I can search for the correct firmware in SamFirm. Please advise.
Thanks.

kimbhoot said:
Hi,
I have a S7 930U that had FRP, I used combination firmware to enable developers mode on, then flashed with several firmware that I found online for 930U, but the phone will boot fully, then reboot within 20 seconds. the vicious boot cycle continues no matter what firmware I put in. I'm thinking I still haven't found the correct firmware for my phone, which is causing the boot loop? Please advise what I should do.
I'm trying to flash again with combination firmware so I can collect all the CSC and related details so I can search for the correct firmware in SamFirm. Please advise.
Thanks.
Click to expand...
Click to collapse
If you can enable debugging and PC recognizes it, plug it in to PC > go to my computer > right click your phone > properties. That should tell you enough.
Sent from my Galaxy S4 using XDA Labs

I thought I found the right firmware with the region code XAA and phone model SM-G930U using SamFirm. Flashed it, booted and it seemed like it was working, but the cycle started again!!! I don't understand why the phone would just reboot when it's being setup. shows setting up android, this may take 3 or 4 minutes, then just shuts off and powers back up.
on the back of the phone, it has this G930UZKAX. Is the region code embedded in that string? if it is, I can't figure out what region code this phone is! Can someone please help me obtain the PDA, CSC and region for this damn phone? I'm about to smash it on the wall.

S7 not booting - recovery not working

My Galaxy was stuck in a boot loop, would load up O/S then when I get to the Android part of my O/S it would freeze on PIN code entry then constantly fail on reboot. I'd have to let the battery flatten before I tried again. I figured I couldn't get anywhere so I'd replace the factory rom. Recovery mode is intermittently working, either it works first time or gets stuck in a boot loop again.
For reference I used the following file to replace the stock ROM in ODIN (I didn't choose re-partition)
AP_G930FXXU1DQAN_CL10305131_QB12238018_REV00_user_low_ship_meta.tar
The phone is completely stock by the way. No root. Has USB debugging enabled
Samsung S7 (Unlocked to all networks, I'm on the GiffGaff network if it matters)
UK Network
SM-G930F is the code on the back of the phone
Currently I can do following since replacing the stock ROM with the rom listed above
- Access recovery mode using the key presses - but gives "No Command". I can't get back through button presses
> I've tried VolUp/VolDown, Power - VolUp - VolDown, Power - Volup, Home, Power - VolUp/Down - Home pretty much all combinations
- I can access Download mode without an issue (Which leads me to believe phone is possible fixable)
Have I completely knackered the phone flashing with the wrong ROM? Or am I missing something?
I'm trying to avoid replacing the bootloader at the moment because I've read it wipes the data, and it's the data I'm trying to get off the phone as it's important. After this I couldn't care less about flashing the phone
Any suggestions please. Help would be greatly appreciated. Or is the phone already FUBAR?

Confirm the model in download mode. Then flash the latest ROM from sammobile.com.

How do I confirm the model in dl mode via Odin or is it written as anothrn name

GrabAndSmash said:
How do I confirm the model in dl mode via Odin or is it written as anothrn name
Click to expand...
Click to collapse
In Download Mode top left corner you have model

Domino5 said:
In Download Mode top left corner you have model
Click to expand...
Click to collapse
Download mode just matches the model number on the back of my phone
PRODUC NAME : SM-G930F
Did I use the right rom? It's listed in my first post, or which one is the right one to use?

GrabAndSmash said:
Download mode just matches the model number on the back of my phone
PRODUC NAME : SM-G930F
Did I use the right rom? It's listed in my first post, or which one is the right one to use?
Click to expand...
Click to collapse
Download and flash this one BL, AP, CP, CSC (not home-csc) https://updato.com/firmware-archive-select-model?record=CE58E60E0EEF11E89F15FA163EE8F90B it's latest stock firmware for UK

Domino5 said:
Download and flash this one BL, AP, CP, CSC (not home-csc) https://updato.com/firmware-archive-select-model?record=CE58E60E0EEF11E89F15FA163EE8F90B it's latest stock firmware for UK
Click to expand...
Click to collapse
Thanks . I'll try that . I can't flash boot loader arm because I'm trying to get access to the files on the e phone first. After that I can do a factory reset
If that fails I'll try a jig maybe that will work

I think it's a bit late, but if you flash with CSC and not the HOME_CSC, you will lose your Data.

profi_fahrer said:
I think it's a bit late, but if you flash with CSC and not the HOME_CSC, you will lose you Data.
Click to expand...
Click to collapse
about 2 mins too late
I just flashed with odin everything but the bootloader and using CSC

Did I just brick my device?

Hey guys!
So basically I will start from the top:
1. Device is Samsung Galaxy Note 10 Lite (SM-N770F) (F/DS if it matters really)
What happened is:
I've wanted to install Android 11 update on my phone - downloaded SamFirm app, searched for correct firmware for my region (I've made sure to select appropriate device and region).
Then I've downloaded Odin (3.14.1), loaded all files correctly - no errors or anything, started the process in Odin and after some time I got an error on the phone - Custom Binary(SUPER) Blocked By OEM Lock.
Now what happens is that I can't do literally anything with my device - it's turned on constantly on the same screen, on the top I can see the above error in red font, while on the center of the screen there is message "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." - which I of course did, but Smart Switch doesn't even see the device or anything.
I can't turn off the device - while I press power and volume down button, it just goes black for a moment and comes right back up on the same screen no matter what.
Although, I think it's in downloading mode - Odin still sees it correctly (when I plug it in or out I can see changes in Odins screen).
Tried downloading older versions through SamFirm, other versions of Odin, other USB in computer, other cable - no luck at all.
Did I fully bricked the device? Or is it just soft bricked? Is there anything I can do now? Can Samsung center help me? I've tried chatting with them but they just sent me to their facility.
I'd do literally anything to fix this. Please help me, I'm desperate.

If you can get into recovery, i would try factory reset there. Then go to downloadmode and try complete new flash of newest version with csc (not home_csc). But im not sure, wether it is possible to flash with odin if bootloader is not unlocked in this new samsungs. I allways used odin with unlocked bootloader.

can't get into recovery - only thing I see is the above mentioned screen and there is 0 possibility of going anywhere else

priamusx said:
Hey guys!
So basically I will start from the top:
1. Device is Samsung Galaxy Note 10 Lite (SM-N770F) (F/DS if it matters really)
What happened is:
I've wanted to install Android 11 update on my phone - downloaded SamFirm app, searched for correct firmware for my region (I've made sure to select appropriate device and region).
Then I've downloaded Odin (3.14.1), loaded all files correctly - no errors or anything, started the process in Odin and after some time I got an error on the phone - Custom Binary(SUPER) Blocked By OEM Lock.
Now what happens is that I can't do literally anything with my device - it's turned on constantly on the same screen, on the top I can see the above error in red font, while on the center of the screen there is message "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." - which I of course did, but Smart Switch doesn't even see the device or anything.
I can't turn off the device - while I press power and volume down button, it just goes black for a moment and comes right back up on the same screen no matter what.
Although, I think it's in downloading mode - Odin still sees it correctly (when I plug it in or out I can see changes in Odins screen).
Tried downloading older versions through SamFirm, other versions of Odin, other USB in computer, other cable - no luck at all.
Did I fully bricked the device? Or is it just soft bricked? Is there anything I can do now? Can Samsung center help me? I've tried chatting with them but they just sent me to their facility.
I'd do literally anything to fix this. Please help me, I'm desperate.
Click to expand...
Click to collapse
I experienced similar situation, but in my case, even my phone stuck in download mode screen, ODIN did not detect my phone, even PC wasn't response when plug in USB cable. As same as you say, when I tried to power off, it was power on itself and "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" message appear on screen.
Then I tried to enter download mode again in download mode screen, by pressing power off, and after screen go black press immediately volume up+down. After that phone enter the download mode screen (again), it was looks like the same, but this time I was able to install firmware. Actually I really dont understand why this method work but you can give a try.

Unfortunately, still no luck.
But I've thought about other thing. Do you think it's possible to use .PIT file and re-partition option in Odin?
From what I've read everywhere this will wipe all partition data (so basically it should wipe every single thing) from the device, so it should be possible to overcome this oem lock, shouldn't it? Or will I just brick the device even further? I'm kinda desperate here as the phone is about 2-3 months so it's as brand new...
Edit: I think I've found another issue here. My device model is SM-N770F/DS so it's a Dual Sim model, while everywhere I only see firmware for SM-N770F so without dual sim. May it cause problems as well? How about the above option with flashin firmware with pit file and wiping partitions?

If you have figured it out by now good for you. If not, that emergency screen you see is nothing to fear. You can flash firmware with Odin from that screen...no worries your not bricked. Just do as you would if the device were in download mode..flash away.

Was your bootloader unlocked?