Hi,
I am using Voice Xtreme V30 android jellybean 4.1 device. Device specifications are collected by using Quadrant Standard app and specs are:
System
SDK Version: 4.1.1.
ID: JRO03c
OS Name: Linus
OS version: 3.4.0
Device
Model: Xtreme-V30
Product: Xtreme-V30
Board: Xtreme-V30
Figerpring://:4.1.1./JRO03C/1376357816:user/test-key
CPU
Name: ARMv7 Processor
rev 0 (v7I)
Current Freq.: 1001 MHz
Min freq.: 250.25
Cores: 2
Architecture: 7
BogoMIPS: 1993.93
Hardware: MT6577
Revision:0
Serial Number: 0000000000000000
Memory
Total: 485060 kb
Free: 35348 kb
Inactive: 28352 kb
Display
Resolution: 480x800
Refrest rate: 59.12Hz
Please help me to install CWM recovery mode and I have tired right now my mobile is working fine except unable to boot in recovery mode through power + volume up key while power + volume – ( Odin mode is working )
Asif Hafeez said:
Hi,
I am using Voice Xtreme V30 android jellybean 4.1 device. Device specifications are collected by using Quadrant Standard app and specs are:
System
SDK Version: 4.1.1.
ID: JRO03c
OS Name: Linus
OS version: 3.4.0
Device
Model: Xtreme-V30
Product: Xtreme-V30
Board: Xtreme-V30
Figerpring://:4.1.1./JRO03C/1376357816:user/test-key
CPU
Name: ARMv7 Processor
rev 0 (v7I)
Current Freq.: 1001 MHz
Min freq.: 250.25
Cores: 2
Architecture: 7
BogoMIPS: 1993.93
Hardware: MT6577
Revision:0
Serial Number: 0000000000000000
Memory
Total: 485060 kb
Free: 35348 kb
Inactive: 28352 kb
Display
Resolution: 480x800
Refrest rate: 59.12Hz
Please help me to install CWM recovery mode and I have tired right now my mobile is working fine except unable to boot in recovery mode through power + volume up key while power + volume – ( Odin mode is working )
Click to expand...
Click to collapse
I Dont Think This Device Has CWM
thread: [Q] Xtreme Voice V30 CWM recovery method needed
Recovery mode is not working since i tried to install CWM recovery
Xteme Voice V30 has mediatek mt6577 chipset . its familiar with Chinese handset . I want to update my mobiles android version 4.2 jellybean or 4.4 kitkat
Today hopefully I'm going flash my mobile and my default recovery mode will be working again .
If my mobile doesn't have support of CWM Mode then TWRP will be work or not and I need custom update rom for my mobile.
Dear All,
I had flash my mobile and now I can move into recovery mode by name . android system recovery 3e . i want to update my mobile into 4.2.2 jellybean or 4.4 kikat kindly provide me help . . . .
Hi guys, im not a noob when it comes to rooting but this new tablet is giving me a headache and i dont know what to do now.
So far, I have tried many one click apps, even ones for the pc... Even chinese ones and nothing has managed to root it.
Here is the device details...
About My Device
Android ID: 2c8b057eec19358a
SIM Serial Number: Unavailable
Wi-Fi MAC Address: cc:d2:9b:b4:d1:ea
Bluetooth Address: CC2:9C:B41:EA
IP Address: 192.168.0.7
International Mobile Station Equipment Identity (IMEI): Unavailable
International Mobile Subscriber Identity (IMSI): Unavailable
Internal Memory Status: Available: 3GB | Total: 4GB
External Memory Status: Available: 3GB | Total: 4GB
Manufacturer: UNKNOWN
Model Number: PNDPP44Q7GPBLK
Android Version Name: KITKAT
Android Version: 4.4.2
SDK Version: 19
Build Number: A31S_Q72_Q721HB3C_PG.20140618
Screen Density: Standard/Medium Density (MDPI)
Any advice on how to obtain root would be fantastic.
Update
Right, I read on another forum about Chinese phones and tablets with a certain type of chipset can have the firmware / rom copied directly from the device in the form of a scatter file which you then use to create the image on your pc.
I already tried the tools but unfortunately, the software is not compatible with my tablets hardware.
I have now sent an email to the manufacturer explaining that my tablet is stuck in a bootloop and even the reset pin and recovery modes won't work and have requested a copy of the original firmware to flash to my device.
If I am successful in obtaining a copy of the firmware / rom, is there a guide explaining how to modify it in order to root it and how to make a recovery compatible with my device.
At the moment, this is all relying on me getting the firmware / rom from the manufacturer but, if I am successful, I will share my modded + rooted rom with the rest of xda.
While I am waiting for a response from the manufacturer, does anyone know if it is possible to "rip" the current rom / bootloader / etc from the tablet, just in case they don't send me the files I requested?
Any news on this at all? I have an 8inch cello win 8 tablet that won't start up so any future info on cello tablets would be handy.
Any news?
I purchased a tablet for my kids to play Pokémon go, the issue is that authentication fails, I started to look into the issue and I ran root checker, it says your K107 is not rooted
Root Access:
No Access
SU:
su found
UID/GID:
uid=10078(u0_a78)
gid=10078(u0_a78)
groups=3003(inet),9997(everybody),50078(all_a78)
context=kernel
Utils:
toolbox
Path:
/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
Path:
/system/xbin/
Version:
/system/bin/sh: <stdin>[41]: /system/xbin//su: can't execute: Permission denied
Permissions:
rwsr-x---
Owner:
shell:67060
SELinux:
Disabled
I then ran Safety Net and it failed
Basic integrity and CTS Profile match.
This I think means that the bevice has access to the system files.
Because of this access Pokémon go, android pay and others will not authenticate access.
The tablet is a Beista 10.1 Android 5.1 (SDK 22)
Any ideas on how to fix this?
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
2k05gt said:
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
Click to expand...
Click to collapse
Unroot the device by opening Super app (if you don't have it, install it from Playstore), then open its app settings, find the setting that says "cleanup for Unroot and uninstall", this will remove the su binaries from system and uninstall the Super app. That will fully Unroot you and allow your apps to run.
Or you can leave it rooted and find a mod or app that hides root from those apps to let them run.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Unroot the device by opening Super app (if you don't have it, install it from Playstore), then open its app settings, find the setting that says "cleanup for Unroot and uninstall", this will remove the su binaries from system and uninstall the Super app. That will fully Unroot you and allow your apps to run.
Or you can leave it rooted and find a mod or app that hides root from those apps to let them run.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Unable to find Super App. but I have SuperSU it says that there is no binary installed.
I did root checker and It says system is not Rooted.
but when I use file explorer I am able to see the system files, (etc, system so on)
There is an app called SIM Toolkit (versioin 5.1-vKB095L) it wont run, says it's not installed, but it's in the application list as installed and running.
using root app deleter I see under system apps its located at /system/priv-app/stk1/stk1.apk
says its an official app optimized for current ROM
2k05gt said:
Unable to find Super App. but I have SuperSU it says that there is no binary installed.
I did root checker and It says system is not Rooted.
but when I use file explorer I am able to see the system files, (etc, system so on)
There is an app called SIM Toolkit (versioin 5.1-vKB095L) it wont run, says it's not installed, but it's in the application list as installed and running.
using root app deleter I see under system apps its located at /system/priv-app/stk1/stk1.apk
says its an official app optimized for current ROM
Click to expand...
Click to collapse
Yeah, autocorrect got me.
If there are no su binaries then you aren't rooted.
The SIM Toolkit is a stock system app, it is supposed to be there, it's not an app you can open or do anything with, it just runs in the background.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Yeah, autocorrect got me.
If there are no su binaries then you aren't rooted.
The SIM Toolkit is a stock system app, it is supposed to be there, it's not an app you can open or do anything with, it just runs in the background.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Well then I need to figure out what is causing SafetyNet to fail CTS Profile mismatch.
Both Pokemon Go and Android Pay will not Authenticate.
And why is it that I can see the System files?
2k05gt said:
Well then I need to figure out what is causing SafetyNet to fail CTS Profile mismatch.
Both Pokemon Go and Android Pay will not Authenticate.
Click to expand...
Click to collapse
Try reflashing stock firmware and start over from scratch.
Do a Google search for:
"Return to stock (your model number)"
If it's available for your model, that will find your stock firmware and instructions to flash it. Get it flashed and then reinstall the apps you're trying to get working.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:35 AM ---------- Previous post was at 11:19 AM ----------
2k05gt said:
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
Click to expand...
Click to collapse
I found this thread for your device, you can probably find the stock firmware to restore it somewhere in that thread. Use SP Flash tool to flash it. I saw a firmware linked there for K960 which I believe is your device.
http://www.chinaphonearena.com/forum/Thread-Question-How-to-root-JLINKSZ-K960-MTK6592-OR-T
I found this thread discussing alternative firmwares that might be used.
https://www.china-devices.com/forum...e-t950s-_tried-every-rom_still-bricked.20009/
In my experience, these cheap Chinese tablets aren't worth having because they have no product support whatsoever. These devices are actually knock-off trying to imitate/clone "real" devices.
I suggest you ditch that tablet and get something better.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Try reflashing stock firmware and start over from scratch.
Do a Google search for:
"Return to stock (your model number)"
If it's available for your model, that will find your stock firmware and instructions to flash it. Get it flashed and then reinstall the apps you're trying to get working.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:35 AM ---------- Previous post was at 11:19 AM ----------
I found this thread for your device, you can probably find the stock firmware to restore it somewhere in that thread. Use SP Flash tool to flash it. I saw a firmware linked there for K960 which I believe is your device.
http://www.chinaphonearena.com/forum/Thread-Question-How-to-root-JLINKSZ-K960-MTK6592-OR-T
I found this thread discussing alternative firmwares that might be used.
https://www.china-devices.com/forum...e-t950s-_tried-every-rom_still-bricked.20009/
In my experience, these cheap Chinese tablets aren't worth having because they have no product support whatsoever. These devices are actually knock-off trying to imitate/clone "real" devices.
I suggest you ditch that tablet and get something better.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I tried getting the kids Samsung Tablets, @ 250.00 each. busted then in a few months, I want a cheap tablet that will run Pokemon Go that if they break them its not breaking my wallet. nothing out there with 2gb system memory is under 120 bucks.
I found a FTP Site ftp://ftp.jlinksz.com/
Account: BMXC
Password: bmxcrjxz
I am really not sure what ROM is for My Device...
2k05gt said:
I found a FTP Site ftp://ftp.jlinksz.com/
Account: BMXC
Password: bmxcrjxz
I am really not sure what ROM is for My Device...
Click to expand...
Click to collapse
MODEL: k107
2k05gt said:
I purchased a tablet for my kids to play Pokémon go, the issue is that authentication fails, I started to look into the issue and I ran root checker, it says your K107 is not rooted
Root Access:
No Access
SU:
su found
UID/GID:
uid=10078(u0_a78)
gid=10078(u0_a78)
groups=3003(inet),9997(everybody),50078(all_a78)
context=kernel
Utils:
toolbox
Path:
/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
Path:
/system/xbin/
Version:
/system/bin/sh: <stdin>[41]: /system/xbin//su: can't execute: Permission denied
Permissions:
rwsr-x---
Owner:
shell:67060
SELinux:
Disabled
I then ran Safety Net and it failed
Basic integrity and CTS Profile match.
This I think means that the bevice has access to the system files.
Because of this access Pokémon go, android pay and others will not authenticate access.
The tablet is a Beista 10.1 Android 5.1 (SDK 22)
Any ideas on how to fix this?
Click to expand...
Click to collapse
Hello 2k05gt, I recently bought this device. I messed up with the launcher and now is stuck in the "Adnroid is starting, optimizing app" loop. When I enter to recovery mode, a screen pops up saying "No command". Perhaps no recovery is flashed? Do you happen to have the same issue? I am really pissed off because I don't know how to fix this.
Hi guys i have what i can only describe as a big tablet (i believe it to be some sort of adverting screen running android kitkat) i have been looking for days for info on the device but have come up blank. I would like to be able to install new firmware as the one on it is very limited. all info i have is listed any advice on Firmware and how to install TWRP as device has no buttons bar 2 Power Button and Reset Button. device has 3 usb ports and i have keyboard installed.
elonex
AD181-SDCT-BBW1-A-V1
RK3188
ROCKCHIP
RK30SDK
RK30BOARD
ARM [email protected]
REVISION - R3PO
BUILD ID - CX-WF185IT-Z05-18.5-B1.02.20170412
BUILD/KOT49H
DALVIK 1.6.0
KERNEL VERSON 3.0.36+(ENG.ROOT.20151104.193426)
KERNEL ARCHITECTURE ARMV71
API LEVEL 19
OPEN GL ES 2.0
samsung 622
KLN8GIWEPD-B031
S4CRDMGXN
SKhynix
H5TQ2G83GFR
RDC 627V
DWMN0916LH1
Z05-V4.1 8G+1G
18.5/21.5-5V
04.600.ELC.0195
CXP02016376 KBL
ADW160851056
Im currently stuck on android screen lol any help would be greatly appreciated
So I have this tablet, thanks to my little nephew who loaded it up with tons of games and viruses/ads (he's 8 yrs old) so he asked me to repair it for him. My problem is that I can't seem to find any relevant info on this tablet, not even on the manufacturer's website , which i find truly strange not to find it there and it's not a very well designed site either. Does anyone know of any software for this tablet to restore or upgrade firmware on this equipment? Can it be TWRP'd or CWM'd?? Are there any Custom ROM's for it? I'm kind of assuming most answers will be hard no's due to the Intel Processor in this thing.
According to CPU-Z this are the specs:
Processor: Intel Atom (TM) CPU Z2520 1.20 GHz
Cores: 2 (4 CPU's)
Architecture: x86
CPUID: 6.35.1
Codename: Saltwell
Model: ONLY AGILE B (GHIA-pn)
Manufacturer: GHIA
Board: GB7_GEN_CN
Hardware: redhookbay
Screen; 6.94 inches
Resolution: 600 x 1024 pixels
DPI: 170
RAM: 1024 MB
Internal Storage: 3.85 GB
OS: Android 4.4.2
API: 19
Bootloader: Droidboot Provision OS v.2.0
IFWI version: F9.FD
Product: GHIA-PN
BUILD ID: G02TJET_A442_X04_006_607PRS_ES
Java VM: Davlik 1.6.0
OpenGL ES: 2.0
Kernel Arch.: i686
Kernel Version: 3.10.20 (eng.aily.20150128.132500)
Root: NO
Google Play Svc.: 20.15.16 (000700-309763488)
UPDATE 5/30/2020: I contacted the manufacturer GHIA and they responded quickly indicating this tablet is supposed to match up with the GHIA Agile A7i and even provided me this direct link to download the manual and firmware updates. It contains the IntelAndroidDrvSetup 1.1.5, iSocUSB Driver 1.0.1, and PhoneFlashTool 3.1.8.2 (win32) executables. I couldn't get the 1.1.5 or 3.1.8.2 files to launch, it gave me a "admin user has blocked these programs..." error msg even though I ran them as Admin. So instead, I downloaded updated versions of these programs and they installed fine (IntelAndroidDrvSetup 1.10.0, iSocUSB 1.2.0 & PhoneFlashToolLite 5.8.4.0). I was able to flash the firmware using PhoneFlashToolLite 5.3.2.0 which did give the tablet a better touchscreen response and eliminated the lag i saw originally (process is rather lengthy), but it did remain on kitkat 4.4.2 and no root access. It does offer the option to apply firmware updates locally via the system updates menu (online updates wouldn't connect to network), but I couldn't locate the correct directory in order for the system to recognize them that way.
I'm not familiar at all with the Droidboot Provision OS bootloader, albeit it looks pretty cool and useful. Unfortunately I couldn't find adb/fastboot commands that work with it to unlock the bootloader and be able to flash a custom recovery like TWRP/CWM (perhaps ported?) or get a custom ROM on it either. One major flaw i did noticed though is that not many games from the Google Play Store work at all even though they install but just FC. Surprisingly enough, it did allow you to uninstall any app it comes bundled with, so good for bloatware cleanup. I welcome any feedback anyone may have on this little tablet.