Database Info

[Completed] Root Tudou91 D1 *no other forums on this*

Dear XDA,
I have had a Tudou 91 D1 for over a year, and i tried every rooting method. (one click root, srs root, etc) I tried looking for roms but there is little on google about this phone, and nothing on xda. It is a good phone, very happy with it, but no roms. Is there any rom that could be tweaked to work on my phone? I checked about rom porting and creating a new rom via kitchen but all those require a rom for my phone, and a rom i want to change. The problem is i got nothing for my phone.
ALPS Tudou91 D1
quadrant standard review
4.2.1 Jellybean
ID: JOP40D
OS Version:3.4.5
dalvik: 1.6.0
Model:Tudou91 D1
Product/board: ratech89_we_rlk_jb2
ARMv7 Processor rev 2 (v7l)
1.2ghz
4 cores
architecture 7
bogoMIPS:2439.94
MT6589
revision 2
serial: bunch of zeros
total memory:995912 kb
540x960
5'3 in
240 dpi
51.02 fps or refresh rate
PowerVR SGX 544MP
OpenGL ES 2.0
bootloader: unknown (although when i boot into recovery "volume up + power" it shows no command, hold volume down + power, and i get into "Android system recovery <3e>") and its yellow, if that helps lol
http://www.cheapunlockphone.com/?p=1688 <--the phone
if it helps, i extracted launcher apk and it had something like s3 launcher.
Thank you very much!

First off, try to see if the manufacturer provides existing firmware on their website. It would be ideal if you can get that. If there is one, then that would be your backup.
Now the next step towards rooting is to either use z4root or try to inject the root into the stock firmware and then flash it yourself. You may also use this guide to enhance it further.
Now supposing you do not find a Stock firmware by the manufacturer, there is a way to backup the current stock firmware on the phone. At least for most of the phones. Here's a nice Guide on how to do so. I am aware its for a different phone. But it will give you ideas and pointers.

FYI on SRS page they say your phone is supported. So Try These steps
1. Use USBDEVIEW to uninstall any usb devices that look like they may be your phone.
2. Download the Universal Drivers from here http://hexamob.com/drivers-smartphone-tablet/tutorial-universal-adb-driver-koush/
3. Once you have your phone installed with the proper drivers and can access ADB via cmd (if you need adb tool search the forms) download the srsroot and run it.
Like i said in the first line Your Phone is Supported by SRS root. Once you have root back up your phone. Back up your WHOLE phone not just system and data. Everything. Once you have a good backup. start playing. If you just want to use some simple mods install xposed. If you want a custom AOSP rom u will prob have to build it your self.
Have fun!

I will try! i think i messed up somewhere with adb, when i tried srs root. does srs root need adb drivers? if so, then that was my problem.

messed up
Perseus71 said:
First off, try to see if the manufacturer provides existing firmware on their website. It would be ideal if you can get that. If there is one, then that would be your backup.
Now the next step towards rooting is to either use z4root or try to inject the root into the stock firmware and then flash it yourself. You may also use this guide to enhance it further.
Now supposing you do not find a Stock firmware by the manufacturer, there is a way to backup the current stock firmware on the phone. At least for most of the phones. Here's a nice Guide on how to do so. I am aware its for a different phone. But it will give you ideas and pointers.
Click to expand...
Click to collapse
I just tried this method, followed your steps, and srs root results:
10:11:58 AM [+] Testing exploit: root4b (please wait..)
10:12:05 AM [+] Device Reboot #1 (Wait till it's started)
10:13:27 AM [+] Device Reboot #2 (Wait till it's started)
10:14:41 AM [+] Remounting /system Filesystem as R/W..
10:14:41 AM [+] Installing SU Binary...
10:14:41 AM [+] Installing SuperUser APK...
10:14:42 AM [+] Remounting /system Filesystem as R/O..
10:14:48 AM [+] Rooting Complete !
I cant find the superuser app, and i checked with root checker pro if i had root, and it says that the device is not rooted.
root checker pro:
superuser application- is not installed!
SuperSU application- is not installed.
analysis: Setuid attribute present and root user ownership present. Root access is correctly configured for this file! Executing this file can grant root access!
I found the file in system/bin/su but i dont know how to execute it.
also to top things up, when i tried srs root option for gesture lock, it said this
10:33:43 AM - Starting ADB Server..
10:33:48 AM - Manufacturer: alps
10:33:48 AM - Model: Tudou91 D1
10:33:48 AM - Android Version: 4.2.1
10:33:48 AM - Build ID: Tudou91_D1_V1.0
10:33:48 AM - Board ID: ratech89_we_rlk_jb2
10:33:48 AM - Chipset Platform:
Device is not rooted, To use this function you need to root it first...
its messed up

Have you tried the steps I had mentioned ?

Hello,
After looking at your thread we have decided to close it. XDA assist is here to help users learn their way around XDA. It is not here to fix issues for users. Please have a look at the goals of the forum:
The mission of XDA Assist is to provide basic help to those who have tried searching but can't find what they are looking for and need assistance. This is not a "helpdesk" providing technical assistance but more to point you in the correct direction with your problem. Perhaps you can't find posts on how to root your phone, install custom recovery or maybe you have questions about how to navigate and use features on the site.
Click to expand...
Click to collapse
As there is no dedicated forum available for your device, the best we can offer is to create a thread in: Upgrading, Modifying and Unlocking section in the general forum. Other users on XDA may be able to help you there. If you can provide as much detail on your device as possible and the steps you have taken so far it will help.
We do hope you can get your issue resolved.
Many thanks,
Ghost
Forum Moderator - XDA Assist forum.

How to root a new purchased rk3188 unit correctly without installing custom rom?

I purchased the following Android 5.1.1 rk3188 unit:
https://nl.aliexpress.com/item/Car-...luetooth-andrdoid-5-1-system/32805370646.html
The unit runs on android 5.1.1 and uses an rk3188 chip.
I need to root it because I want to install TomTom GO on it, at the moment i cannot install it because TomTom gives a internet connection error when i start the app.
Elsewhere on the forum i found a solution how to fix this, by changing the serialnumber and or devicetype/make/model etc.
To do this my unit needs to be rooted and xposed installed but currently it isn't rooted, i also want to keep using the stock rom because i like the interface and it has a special option for the MINI (mph button) in the interface.
I tried too root it myself but sadly i failed.
I entered *#hct#root# in factory settings and it stated 'adb rooted' (or something) but still i have no root when i run a root check app.
I then rebooted (as advised) and installed the latest version of kingoroot and ran it, sadly this app reports it has failed to root it.
Now my question is how do i root this device without installing a custom rom and install xposed so i can change my serial number to get tomtom go working?

B3rt said:
I purchased the following Android 5.1.1 rk3188 unit:
https://nl.aliexpress.com/item/Car-...luetooth-andrdoid-5-1-system/32805370646.html
Now my question is how do i root this device without installing a custom rom and install xposed so i can change my serial number to get tomtom go working?
Click to expand...
Click to collapse
I always used KingoRoot successfully on all 5.1.1 MTCB ROMs. Did you have Internet access when trying to root? Kingo root needs to download files from the Internet, if you're not connected it won't work.

m00n61 said:
I always used KingoRoot successfully on all 5.1.1 MTCB ROMs. Did you have Internet access when trying to root? Kingo root needs to download files from the Internet, if you're not connected it won't work.
Click to expand...
Click to collapse
Yes i had internet and it downloaded files also, but root failed.
Maybe i did it wrong....
Should i reboot after i enabled adb root using factory settings password *#hct#root# ?
Is this correct:
- enable (adb) root factory setting
- reboot
- download and run kingoroot
OR
- enable (adb) root factory setting (do NOT reboot)
- download and run kingoroot

B3rt said:
Yes i had internet and it downloaded files also, but root failed.
Maybe i did it wrong....
Should i reboot after i enabled adb root using factory settings password *#hct#root# ?
Is this correct:
- enable (adb) root factory setting
- reboot
- download and run kingoroot
OR
- enable (adb) root factory setting (do NOT reboot)
- download and run kingoroot
Click to expand...
Click to collapse
Just download and run kingoroot. The "*#hct#root#" code is no longer working on 5.1.1 ROMs

m00n61 said:
Just download and run kingoroot. The "*#hct#root#" code is no longer working on 5.1.1 ROMs
Click to expand...
Click to collapse
Tried it several times but eachtime it fails to root....

B3rt said:
Tried it several times but eachtime it fails to root....
Click to expand...
Click to collapse
What kind of MCU do you have?

m00n61 said:
What kind of MCU do you have?
Click to expand...
Click to collapse
A-MEDIA AUTO (1024x600)
ARM Cortex-A9 @ 1.6Ghz (x4)
1024 MB memory
mcu: MTCD_HLA_V1.88_1
android 5.1.1
kernel: 3.0.101+ ([email protected] #90 Fri Sep 9 16:24:49 CST 2016)
Buildnumber: rk3188-userdebug 1302016.18:00:29

B3rt said:
A-MEDIA AUTO (1024x600)
ARM Cortex-A9 @ 1.6Ghz (x4)
1024 MB memory
mcu: MTCD_HLA_V1.88_1
android 5.1.1
kernel: 3.0.101+ ([email protected] #90 Fri Sep 9 16:24:49 CST 2016)
Buildnumber: rk3188-userdebug 1302016.18:00:29
Click to expand...
Click to collapse
Looks like you're in the wrong section, you have a MTCD unit, not a MTCB/C
You should look for answers HERE

Root Access Enabled but no Root Apps Respond

I recently dusted off a 2012 pre-rooted Android TV box and am trying to attain root again after doing a factory reset.
AMLOGIC Cortex A9 Neon ARMv7L Rev4 32-bit CPU
Mali400 Quad Core 3D GPU
Model: MBX reference board (f16ref)
OS version: ICS 4.0.4
Kernel version: 2.6.34
Build number: ICS.MBX.20120811
Chipset: ARM AMLOGIC Meson3 8726M SKT SH
The CPU Identifier app shows that root access is enabled, as it was before the reset. However, the Root Checker app indicates that I'm not rooted. The Reboot Manager root app also indicates root failure and won't perform. Are there some troubleshooting steps I can take to get apps to respond to root? Any help appreciated. Thanks.

mel2000 said:
I recently dusted off a 2012 pre-rooted Android TV box and am trying to attain root again after doing a factory reset.
AMLOGIC Cortex A9 Neon ARMv7L Rev4 32-bit CPU
Mali400 Quad Core 3D GPU
Model: MBX reference board (f16ref)
OS version: ICS 4.0.4
Kernel version: 2.6.34
Build number: ICS.MBX.20120811
Chipset: ARM AMLOGIC Meson3 8726M SKT SH
The CPU Identifier app shows that root access is enabled, as it was before the reset. However, the Root Checker app indicates that I'm not rooted. The Reboot Manager root app also indicates root failure and won't perform. Are there some troubleshooting steps I can take to get apps to respond to root? Any help appreciated. Thanks.
Click to expand...
Click to collapse
I don't know much about android tv, but is it possible you lost you SuperUser app when you factory reset? In this scenario you'd have root, but no root apps would work because the app that authorizes it is not there. Probably need to put SuperSu, Magisk, or similar app on it to have root function.
Sent from my SM-T210 using Tapatalk

Yeah, You may have the binaries installed but you might not have the Superuser app installed.
On the Google PlayStore search for SuperSU and download the one by Codingcode Tools.
Not an issue with SuperSU it is all fine on my Android 5.0.2!

RealWelder said:
...you'd have root, but no root apps would work because the app that authorizes it is not there. Probably need to put SuperSu, Magisk, or similar app on it to have root function.
Click to expand...
Click to collapse
Thanks so so much for all replies. The suggestions to install a SU manager app worked and now my root behaves as expected.
I didn't try SuperSU because that one caused my issues in the first place with a "binary occupied" error. Superuser ClockworkMod v1.0.3.0 worked as expected. Thanks again.

Need help root o+ compact pro android 6.0

:crying:Help pls i tried all other rooting apps. all fail.

I need it too.

me too.. i tried all & says something like its not in their cloud system yet.. help

DEVICE INFORMATION
NAME: P8 lite 2017
MODEL: PRA-LA1
CODENAME: HWPRA-H
MANUFACTURER: Huawei
────────────────
GOOGLE SAFETY NET REPORT
STATUS: PASSED
────────────────
BUSYBOX REPORT
STATUS: NOT INSTALLED
────────────────
BUILD PROPERTIES
BOARD: hi6250
BRAND: HONOR
CPU ABI: arm64-v8a
DISPLAY: PRA-LA1C185B187
FINGERPRINT: HONOR/PRA-LA1/HWPRA-H:7.0/HONORPRA-LA1/C185B187:user/release-keys
HARDWARE: hi6250
HIDE PRODUCT INFO: false
ID: HONORPRA-LA1
IS EMULATOR: false
NO HOTA: false
PERMISSIONS REVIEW REQUIRED: false
PRODUCT: PRA-LA1
SERIAL: HGHDU17A26001465
SUPPORTED 32 BIT ABIS: armeabi-v7a, armeabi
SUPPORTED 64 BIT ABIS: arm64-v8a
SUPPORTED ABIS: arm64-v8a, armeabi-v7a, armeabi
TIME: 1512526705000
TYPE: user
Report generated using SafetyNet Checker on Google Play

we need help rooting this phone, unfortunately no one and i mean NO ONE even bothered helping us out, i know this phone is pretty much of a junk since the manufacturer went AWOL and therefor wont and will never receives updates, so please if anyone in here who has knowledge of rooting this phone please help us, I already search for a manual way of rooting but the process is way too old and outdated.

How to root o+ compact pro

Progress
So far got to unlock bootloader using tge usb driver from //singledrivers.blogspot.com2017/03/oplus-compact-pro-usb-driver-for-windows.html?m=1
Can anyone help by making a twrp recovery for this phone? Running mt6735.

I recently bought a Lebast x14 pro max phone and wanted to Root it, but I couldn't find a way to unlock it.

Phone model: Lebast X14 Promax
Version number: T9312-G2233F-5G-20221201-V1104
Hardware version number: T9312
Baseband version: 4G_MODEM_20A_W21.50.2|sharkl5pro_modem, 4G_MODEM_20A_W21.50.2|sharkl5pro_modem
CPU model: snapdragon855
Number of CPU cores: 8 cores
RAM: 16G
ROM: 512G
Screen resolution: 1600x720
Operating System: FreemeOS
Android version: 11
This is the message displayed in "About phone"
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
It is said on the Internet that 5G is not supported, but this version is mainly based on 5G. Anyway, I tried to find a lot of Root methods, but unfortunately none of them work. May a root expert please give me a clear direction.

you got scammed bro wtf

w_tapper said:
你被騙了兄弟 wtf
Click to expand...
Click to collapse
Even if it is not 5G, I still want to root it and use it as other software.

May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.

jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
I'll try it out, thanks for sharing

Catbgm said:
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
Click to expand...
Click to collapse
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com

jwoegerbauer said:
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com
Click to expand...
Click to collapse
I opened it after installation, but jumped out.

jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
jwoegerbauer said:
May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.
Click to expand...
Click to collapse
Catbgm said:
I'll try it out, thanks for sharing
Click to expand...
Click to collapse
I open KernelSU after installation, but it shows
Unsupported
KernelSU now only supports GKI kernels
Core: 4.14.193
Admin version: v0.5.7(10866) Fingerprint:5G/T93115G:11/RP1A.201005.001/1669974822: user/release-keys SELinux state: Mandatory
Because the display is Unsupported, according to the above, you need to compile the kernel yourself.
I checked the unofficially supported devices and saw a similar version number, but there is only one digit difference.
rushiranpise
android_kernel_samsung_exynos9610_mint
Kernel 4.14.194 exynos9610 non-GKI device, added KernelSu using manual method
Would it be more appropriate to use this?

Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .

If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.

jwoegerbauer said:
Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .
Click to expand...
Click to collapse
In fact, I have installed the magisk, just on the installation, I don’t know how to proceed, I need to select and repair the file, but this phone does not have a file for flashing the phone like a big brand, I also tried to go to the file in the phone I searched for boot-related files and tried to patch and install them, but they couldn’t be installed. I tried to install the magisk in a virtual machine, but even if it was installed, I still need to patch the files to get full permissions.

jwoegerbauer said:
If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.
Click to expand...
Click to collapse
In fact, I want to install the software to get cracked and get restricted functions.

.

@Catbgm
Here you go - Notice: I've not tested it.
Using your phone
A:
Open browser
1. Install SH Script Runner
2. Download Buysbox
Close browser
B:
Open SH Script Runner
1. Create shell script what contains these lines of code
Code:
#!/bin/bash
CPU64=$(cat /proc/cpuinfo | grep 'ARMv8')
if [[ -z "$CPU64"]] ; then
CPU="arm"
else
CPU="arm64"
fi
BB="/data/local/tmp/bb"
mkdir -p -m 777 $BB
cp /sdcard/Download/busybox_1_34_1_ARM/$CPU/bin/* $BB/
rm -r /sdcard/Download/busybox_1_34_1_ARM
mv $BB/busybox $BB/bb
chmod -R u=rwx,g=r,o= $BB/*
alias SU="$BB/bb su"
echo "Testing SU functionality..."
sleep 15 && echo -en '\007'
whoami
echo ""
$($SU)
echo ""
whoami
echo "All done."
sleep 15
exit 0
2. Run the script
C:
Close SH Script Runner