Database Info

screen replacement

Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!

ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.

I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???

ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy

Hi,
To barncourt, how is the build quality of those honk kong made screens?

also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?

Of course, it is just a hole

p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.

barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)

http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm

I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button

[GUIDE] I9000 Screen Replacement

This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128

pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.

Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.

the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect

pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.

gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?

If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!

I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.

Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.

please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).

Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App

yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.

pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.

I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.

Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.

YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App

amoled or samoled though?

My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App

Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?

Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App

Cracked Screen - Replacement part?

Well, I knew the time would come, I shouldn't be so picky on cases. I had my phone in my lap, hopped out of the car and heard my phone drop from my lap. Totally forgot it was there. One corner impact and it cracked my screen, which is disappointing because I drop my iPhone all the time and nothing happens to it. But, at least it's not the whole screen that's shattered, might even be a waste to replace it. The screen is responsive still.
With that said, anyone know where I can get a replacement screen or should I have a "professional" do it?
I'm looking at this:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item233373ec1c
That way there's no damage to the frame.

well yeah i want to know that too and how much it cost me to replace the screen
Sent from my Nexus 5 using Tapatalk

@dinggus
Ebay link looks OK. I guess you can replace screen yourself, if you have "straight" hands. Nexus 5 Teardown should helps you.
BTW, more Parts for Nexus 5.

Well, if you are going to try this one yourself, it's one of the "easier" ones. As long as you get the LCD assembly and frame that is already put together. On eBay, there are some vendors selling the the assembly + frame for $135. No really crazy tools are needed. Shouldn't be anything too catastrophic happen since you are changing the whole front of the phone. If you were trying to separate the top glass, I'd definitely advise against if you aren't a pro. If you absolutely don't feel comfortable with doing it and can be without the phone for a few days, then feel free to PM me, and we can discuss other options.

If you have steady hands, enough patience and some previous experience in disassembling phones (youtube could help a lot), it shouldn't turn out to be quite a big challenge.
I would advise though in some attention taking off the rear cover (it's not difficult, but if you apply too much pressure you might end up bending or breaking it). Same goes with the battery, which is attached to the back of the screen with some adhesive. Use a plastic tool for this, and try to peel it off with a strong and steady hand. Once you do that, it's only a few screws.

I think LG would fix it for $150 so $135 to fix it yourself eh. Unless you want the accomplishment, but I have never ventured into replacing a cracked screen.

Just got off the phone with LG, they said they can't price over the phone, they have to have a tech see the phone and they'll call with a quote. So, 2 weeks without a phone just to get a quote and maybe repaired if I want to spend that kind of money.

I am 80% positive that I have viewed a few post of them charging $150 for screen replacement. You aught to check in the thread "who dropped it" the answer might be there. Its in general. Hard to find with xda app.
Sent from The Deathstar

Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
I'm looking at this: http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html
It seems to come with majority of everything and I just need to transfer over the antenna wires, motherboard and battery.
or
http://www.repairsuniverse.com/lg-g...exus 5 Screen with Frame&utm_campaign=LE55ONS
I'll have to transfer over everything, which they have a tutorial - https://www.youtube.com/watch?v=OPuCmfhzgbg - which makes me nervous seeing this.

dinggus said:
Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
Can't you try the below? Quite easy to dis-assemble the phone, steady hands and proper screw driver + torx driver, use a hairdryer to warm up the glue connecting the battery + LCD to the digitizer
Sorry can't post external links to XDA due to post counter search Ebay for "Frame-LCD-Display-Touch-Digitizer-Screen-for-LG-Google-Nexus-5-D820-D821" results are between $108-$120 ...
Click to expand...
Click to collapse

[Q] Nexus 5 - Cracked glass front plate question.

Hello folks, first time on these forums.
The glass on my nexus 5 has cracked, but is completely functional. No screen distortion or damage to lower screen components. I have searched for this issue but could only find videos on how to replace the whole screen assembly. I found a replacement screen on eBay for 8.00 which is JUST the glass.
I am wondering if it is possible to replace just the glass plate and not the LCD or digitizer?
Thanks for the help!

I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com

kvillafana said:
I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com
Click to expand...
Click to collapse
This seems to be the general consensus. Thanks for the response.

Restore my Nexus 5

I'm wanting to give my old Nexus 5 a facelift. I love the old phone and not parting with it. Problem is.. The frame is cracked by the sim card tray. Do I have e to replace the screen or just the midframe?

Simplest way to deal with the issue would be a nice case. I use a spigen hybrid case to hide scratches on the back and minor frame cracks.

Frame can be replaced easily...but you obviously need to take it apart for it..

Found a frame for 14 bucks.. but it would be less Hassel to get the frame/LCD together wouldn't it?
I just don't want to mess anything up taking the LCD off the frame

An original frame and LCD are very expensive and the third party LCD and frame are definitely not as good as the original but they are much cheaper. I have replaced quite a few LCD screens using replacements from Aliexpress. The original screens are brighter and the colour looks richer. People for whom I replaced the screen can't really tell the difference until I hold a working party screen screen next to my phone which has an original screen.

A few months ago I spent a lot of time on eBay looking for a used N5. A large number of them had the SIM tray crack, and all of them without exception said it was purely cosmetic and had no effect at all on the phone's performance.
If you really love your N5 the very last thing you want to do is take it apart. Have a browse across the XDA forums to see how many people replaced just the battery and ended up with a dead device. And what you're talking about is no doubt riskier than a simple battery replacement.
Me, I'd just live with it, or if you really can't stand the sight of the crack then use a case as audit13 suggests.