Hey, first post on here so not sure if this is in the right place but here goes.
the phone randomly turned off last night and has been stuck in a bootloop since, when I go into recovery mode its showing that manual mode has loaded, successfully applying multi-CSC at the bottom of the screen but other than that the screen is black.
It isn't rooted and the bootloader is locked, I'm really at a loss for possible ways to fix so any advice whatsoever would be appreciated.
The device is Booting to Bootloader/ Flash mode?
If yes, i recomend to flash Latest Stock Firmware with odin for your Phone Region/ Model,
Download firmware in SamMobile/ SamsungFirmwares
Related
I have a huge problem!
I flashed the twrp (http://forum.xda-developers.com/galaxy-s6/development/rom-aterminatorg920f3zpa1m-6-0-11-0b-t3295183 ) via odin ,as said, and then the phone stayed in download mode instead of rebooting or saying something like "finish" (in odin i got a message that the process successed) only the writing "dont turn the phone off". it stay like this for a long time so i had turn the phone off and since then the phone doesnt go past the samsung s6 logo screen and can be booted into recovery mode in any way!!
Ive tried reflashing twrp (many versions) and to use every other combination to get into Recovery mode (so i could do a factory reset or a data wipe) but it doesnt work.
I had this issue. It was because I was running the latest 5.1.1 update and couldn't flash TWRP. My solution was to use odin to flash stock recovery.
Hope that helps
where cani find stock recovery?
I had a huge problem with my phone after trying to flash a new rom, my phone got brick and i was able to fix it by flashing with odin a firmware and right after the firmware finish going into recovery mode (which is no longer TWRP) and doing a factory reset.
now, everytime that i try to root my device, either with cf-root or twrp my phone goes into boot loop, and the only why to fix it is by doing what i did the first time! (flashing the firmware etc).
Im pretty sure that the problem is somehow related to the red lettering sentece i get in the top left conrer once the phone is in the boot screen (Recovery is not seandroid enforcing) I had this message also everytime well having the old rom but the phone worked fine.
what can I do to fix it, and is it possible that the problem doesnt related to the red message.
P.S - after flashing the firmware and doing factory reset and booting the phone, the message in the top left corner doesnt appearce
which model are you using and are you on the latest android update ? I'm pretty sure you are in DOL5 , if yes then you have to download dok9 and flash that firmware then proceed with root
Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
rakibshahid said:
Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Vatsal said:
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Click to expand...
Click to collapse
Thanks for responding so quickly! But I fixed the problem a few minutes after posting this . But there is a new problem, I downgraded from Android 5.0.2 to Android 4.4.2. After doing this the phone worked perfectly. Then a few minutes later it installed a system update for 4.4.4 and now the phone is hard bricked. I can't access recovery mode, CWM, or even turn the phone on now. Before charging the phone, if I held the power button for a long time, the LED lit up and turned back off. Now there is no response from the phone at all no matter what I do.
Also, I had ClockWorkMod and stock recovery on my phone (Is stock recovery the one that shows up when you hold power+volume down? If so I had both CWM and stock) But now I can't access either recovery modes. If it at least went into stock recovery, I'd flash stock firmware, root it, install CWM, and flash a Lollipop zip. (I like Lollipop, I don't know why there are so many people that hate Lollipop )
Any help would be much appreciated. All i need now is a way to flash files without going into recovery mode on phone.
Greetings, community
I had a hard time yesterday figuring out how to revive my Tab2... My device is (or was) a Tab 2 Wifi P5110 with the Germany 4.2.2 stock ROM installed.
I accidentially (...) flashed TWRP image with ODINs BL (!) option... (3.13) don't ask why... gave me no error... After that it wouldn't want to boot nor it wanted to go to recovery anymore... just a blank screen with backlight on. The only thing that still worked was the download mode.
So to rescue the OS I downloaded the stock 4.2.2 tar (Germany / DBT-P5110XXDMI1-20131118182728) and flashed it with ODIN 3.07 / AP. That worked without errors and after reboot the tablet booted normally to the GUI. :angel:
So far so good, but as I want to get a CustomROM to the device I wanted to get into recovery mode. I tried to get to stock recovery with Pwr+Vol- but the Android Robot didn't show up (I did before my BL-FLash... the day before) and I ended up with just a blank black screen (with backlight on). I tried flashing TWRP with ODIN 3.07 / AP with no other result.
How can I fix that? Have I destroyed some part of my bootloader (?) or bricked my recovery mode with that BL flashing action? What else can I do to get at least the stock recovery and/or TWRP back?
Anybody a glue?
Thanks in advance,
stefl0n
Hello, my problem is that I flash "Twrp_3.2.3-1_a750.tar" with ODIN in order to try and root my SM-A750FN device.
After I flash it and ODIN sais PASS, I get out of download mode and immediatly enter recovery mode. At that point the teamwin logo flashes on the screen and then the phone shuts down. The phone boots up again, tries to go into recovery mode again at which point it goes into a kind of bootloop to teamwin logo and after a few tries it just stays closed, doesnt take anymore commands (dl, recovery, etc.) and starts to heat up like he is still bootlooping just doesnt show on the screen. I let the battery drain, i go into download mode and install stock firmware. I know long story.
SHORT STORY: SM-A750FN wont go into TWRP recovery, when i try to go to recovery mode it bootloops to TWRP logo. I would like to solve this in order to root it.
I specify that i have changed the firmware(rom) on the device, the original one worked with TWRP, I tried the latest firmware I could find for two separete regions and both have the same behavior.
Thanks in advance!
Re-flash the original ROM to get rid off of the failed TWRP installation.
Hello, thanks for the answear. Do you have any idea where to get the original rom from? I dont have it anymore as i din't make a back-up before flashing the ones that i got from the internet. I already tried to flash 2 stock roms from the internet and they dont seem to work with twrp.
Request it from OEM / Carrier.
BTW: It's NOT the installed ROM that doesn't work with TWRP but it's TWRP that doesn't work with installed ROM. Take note that TWRP rewrites portions of installed ROM.
I see, so I should request it from Samsung? Also thanks for you answears, i think i'll try atleast one older ROM for my phone, maybe TWRP will work with that. Thanks!