Vernee Mix2 (4/6gb) [Modding Thread]
New thread for Modding the new model of Vernee Mix 2 4gb & 6gb of Ram Helio P25 Mtk 6757D 64gb Rom Android 7.0 Smartphone 6 inches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In all those photos are shown the new product and the details of the phone !
Not be considered spam or advertising is shown only to understand the difference and the details.
Everybody are Welcome! :laugh::good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Many thanks to all my Friends in the world that collaborate with me "always".
Procedure to flash the official firmware:
A)For flashtool
Use this flash to re alive your device in brick mode ..
Select all file in flashtool
and make download
Discharge the battery if you receive strange message from flashtool going the device in bootloop the battery will be down to zero .
Flashtool v.5.17.44
http://www.mediafire.com/file/75uco4oydzydn23/SP_Flash_Tool_v5.1744.rar
B) With Fastboot procedure
Drivers to recognize the device from windows xp,7, 8 , 10 ecc:
https://mega.nz/#!uQo1XDDI!EF0V4Tr5LgQvXuPAOSrcegtByZqrZt0tGtZe_8RZLms
Adb Command:
http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar
1) Developer options --> OEM unlocking enabled and USB debugging enabled :
Tap on Settings --> About phone --> Tap Build number seven times.
2) To enter in Fastboot mode -->
Device off -->press Power + Level Volume ( + ) in the same time and you will see the selection FASTBOOT RECOVERY NORMAL
3)Unlock the bootloader:
Open Dos window with CMD comand ...
command to run in fastboot mode :
fastboot oem unlock
(the device after the first reboot will enter in factory reset and will reset your device)
4)In adb command :
Copy all the firmware in adb folder....
5)Command to use :
Fastboot flash [example system] [system.img] Do not use [ brachets]
Fastboot flash [example userdata] [userdata.img] Do not use [brachets ]
Fastboot flash [example recovery] [recovery.img] Do not use [ brachets]
ecc
Firmware for Vernee Mix version 4gb ram 64gb Rom Tested
Android 7 MOLY.LR11.W1630.MD.MP.V9.3.P38,2017/10/31
Kernel Version 4.4.15
Build MIX_2_20171031
Official ota Firmware from Vernee staff:
Version only for mix2 4gb
http://www.mediafire.com/file/odl6w8awmns2dxw/full_hct6757_66_n-ota-1513325257-mix2-20171215.zip
Version only for mix2 6gb
http://www.mediafire.com/file/f8bkn3t9h4z61bf/full_hct6757_66_n-ota-1513327172-mix2-pro-20171215.zip
Official Firmware for Vernee Mix 4gb for Flashtool from Vernee staff:
Official Vernee Mix 2 on onedrive server
https://onedrive.live.com/?cid=f4a8d6c4c699e84d&id=F4A8D6C4C699E84D!138&authkey=!ACYRkOgDb5REbqo
Official Vernee Mix 2 on mediafire server
http://www.mediafire.com/file/9o6cm...g-bom10-3m-n-Dis_MIX_2_20171215-sign_user.zip
Twrp For Vernee Mix2 (4gb)
http://www.mediafire.com/file/2wbuaavp2su1w17/recovery_twrp_Vernee_Mix2_4gb_kernel_patched.img
New Details (only for 4gb version):
1) Set up the english language like default;
2) Change colors menu.
3) New Kernel modded
Twrp For Vernee Mix2 Pro (6gb)
http://www.mediafire.com/file/tfthj47q9sc7c48/Recovery_twrp_Vernee_Mix2_Pro.img
New Details (only for 6gb version):
1) Set up the english language like default;
2)Change colors menu.
3) New Kernel inside
Boot Modded :
Boot Encryptable:
http://www.mediafire.com/file/byfsz3bl78bi5uz/boot_encryptable_mix2.img
Boot Patched:
http://www.mediafire.com/file/1gllb1vchhd7547/boot_mix2_4gb_patched.img
How to Receive right root on Vernee Mix2 4/6gb
How To receive right roots in the vernee mix
1) How To Receive right root with Supersu:
You must FORMAT data TWICE a simple wipe is not enough it seems in Android 7.
Follow this procedure in this exact order and should solve most problems.
1. Install TWRP and Boot patched throught flashtool and then boot directly to recovery not system.
2. Choose Wipe/ Advanced /Format DATA type Yes to confirm. When it finishes choose Reboot then recovery.
3. Choose Wipe Advanced Format DATA again type Yes to confirm When it finishes choose Reboot then recovery.
4. Choose Wipe and select cache and Dalvik swipe to confirm When it finishes choose Reboot then recovery.
5. Now install SuperSU v2.82 official
http://www.devfiles.co/download/74iP...1705271822.zip
To see the last version here:
https://forum.xda-developers.com/showpost.php?p=64916199&postcount=3
6. Reboot to System.
You will see the boot logo then it will stop and reboot again this is normal.
Wait for the phone to fully boot up this can take 10 > 15 mins
How suggested by Bigrammy .
2) How To Receive right root with Magisk:
You must FORMAT data TWICE a simple wipe is not enough it seems in Android 7.
Follow this procedure in this exact order and should solve most problems.
1. Install TWRP and Boot Encryptable throught flashtool then boot directly to recovery not system.
2. Choose Wipe/ Advanced /Format DATA type Yes to confirm. When it finishes choose Reboot then recovery.
3. Choose Wipe Advanced Format DATA again type Yes to confirm When it finishes choose Reboot then recovery.
4. Choose Wipe and select cache and Dalvik swipe to confirm When it finishes choose Reboot then recovery.
5. Now install Magisk v15.2 official
https://forum.xda-developers.com/attachment.php?attachmentid=4376517&d=1514831778
To see the last version here:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
6. Reboot to System you will see the magisk app.
After You have made or the first procedure or the second procedure you must install from Play store the busybox apk
and install busybox in sYstem/bin /xbin ecc
Reserved future use 3
Reserved 4
Soon The first custom Rom.
the x vernee has facial recognition that can put us in the mix 2 because Android recognition slow and does not open directly in the home window
Rach13 said:
the x vernee has facial recognition that can put us in the mix 2 because Android recognition slow and does not open directly in the home window
Click to expand...
Click to collapse
This mix 2 is a tragedy! Not have a good hardware and terrible cameras.. So is very hard to transform this device!
Twrp For Vernee Mix2 (4gb)
Click to expand...
Click to collapse
Is this installed on device? After reboot is available?
croxley said:
Is this installed on device? After reboot is available?
Click to expand...
Click to collapse
explain better what you are saying .. i don't understand!
ghost45 said:
explain better what you are saying .. i don't understand!
Click to expand...
Click to collapse
Can this be done with fastboot flash or you have to use flashtool?
ghost45 said:
Procedure to flash the official firmware:
A)For flashtool
Use this flash to re alive your device in brick mode ..
Select all file in flashtool
and make download
Discharge the battery if you receive strange message from flashtool going the device in bootloop the battery will be down to zero .
Flashtool v.5.17.44
http://www.mediafire.com/file/75uco4oydzydn23/SP_Flash_Tool_v5.1744.rar
B) With Fastboot procedure
Drivers to recognize the device from windows xp,7, 8 , 10 ecc:
https://mega.nz/#!uQo1XDDI!EF0V4Tr5LgQvXuPAOSrcegtByZqrZt0tGtZe_8RZLms
Adb Command:
http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar
1) Developer options --> OEM unlocking enabled and USB debugging enabled :
Tap on Settings --> About phone --> Tap Build number seven times.
2) To enter in Fastboot mode -->
Device off -->press Power + Level Volume ( + ) in the same time and you will see the selection FASTBOOT RECOVERY NORMAL
3)Unlock the bootloader:
Open Dos window with CMD comand ...
command to run in fastboot mode :
fastboot oem unlock
(the device after the first reboot will enter in factory reset and will reset your device)
4)In adb command :
Copy all the firmware in adb folder....
5)Command to use :
Fastboot flash [example system] [system.img] Do not use [ brachets]
Fastboot flash [example userdata] [userdata.img] Do not use [brachets ]
Fastboot flash [example recovery] [recovery.img] Do not use [ brachets]
ecc
Firmware for Vernee Mix version 4gb ram 64gb Rom Tested
Android 7 MOLY.LR11.W1630.MD.MP.V9.3.P38,2017/10/31
Kernel Version 4.4.15
Build MIX_2_20171031
Official ota Firmware from Vernee staff:
Version only for mix2 4gb
http://www.mediafire.com/file/odl6w8awmns2dxw/full_hct6757_66_n-ota-1513325257-mix2-20171215.zip
Version only for mix2 6gb
http://www.mediafire.com/file/f8bkn3t9h4z61bf/full_hct6757_66_n-ota-1513327172-mix2-pro-20171215.zip
Official Firmware for Vernee Mix 4gb for Flashtool from Vernee staff:
Official Vernee Mix 2 on onedrive server
https://onedrive.live.com/?cid=f4a8d6c4c699e84d&id=F4A8D6C4C699E84D!138&authkey=!ACYRkOgDb5REbqo
Official Vernee Mix 2 on mediafire server
http://www.mediafire.com/file/9o6cm...g-bom10-3m-n-Dis_MIX_2_20171215-sign_user.zip
Twrp For Vernee Mix2 (4gb)
http://www.mediafire.com/file/2wbuaavp2su1w17/recovery_twrp_Vernee_Mix2_4gb_kernel_patched.img
New Details (only for 4gb version):
1) Set up the english language like default;
2) Change colors menu.
3) New Kernel modded
Twrp For Vernee Mix2 Pro (6gb)
http://www.mediafire.com/file/tfthj47q9sc7c48/Recovery_twrp_Vernee_Mix2_Pro.img
New Details (only for 6gb version):
1) Set up the english language like default;
2)Change colors menu.
3) New Kernel inside
Boot Modded :
Boot Encryptable:
http://www.mediafire.com/file/byfsz3bl78bi5uz/boot_encryptable_mix2.img
Boot Patched:
http://www.mediafire.com/file/1gllb1vchhd7547/boot_mix2_4gb_patched.img
Click to expand...
Click to collapse
Hi gost, does this version of twrp stay on phone even after reboot?
croxley said:
Can this be done with fastboot flash or you have to use flashtool?
Click to expand...
Click to collapse
You could flash like you want!
@merowin, the recovery remains in the device but you must follow the instructions for right root and it remain in the device.. If you don't follow the instructions after reboot in the system the recovery will be replaced with the original one.
This is for all devices not only for this one.
ghost45 said:
You could flash like you want!
@merowin, the recovery remains in the device but you must follow the instructions for right root and it remain in the device.. If you don't follow the instructions after reboot in the system the recovery will be replaced with the original one.
This is for all devices not only for this one.
Click to expand...
Click to collapse
thanks, I'll try it today. You said that it's bad hardware on this device. Do you really mean it, what is bad exactly?
merowin said:
thanks, I'll try it today. You said that it's bad hardware on this device. Do you really mean it, what is bad exactly?
Click to expand...
Click to collapse
I mean that the hardware not answer correctly, the flash is terrible in this device i never see, from all these past years that i remember, the camera is terrible too and the audio woofer is cheap!
ghost45 said:
I mean that the hardware not answer correctly, the flash is terrible in this device i never see, from all these past years that i remember, the camera is terrible too and the audio woofer is cheap!
Click to expand...
Click to collapse
yeah, I agree with you about flash procedure and terrible sound quality. Does it really have Sony camera sensor or its a scam?
ghost45 said:
Soon The first custom Rom.
Click to expand...
Click to collapse
I was going to ask vernee for the kernel sources but based on reading the threads on xda and on the actual vernee forums not sure thats going to happen. as the hardware is all over the shop do you think anyone will or will bother building a new rom?
thecroupier said:
I was going to ask vernee for the kernel sources but based on reading the threads on xda and on the actual vernee forums not sure thats going to happen. as the hardware is all over the shop do you think anyone will or will bother building a new rom?
Click to expand...
Click to collapse
Vernee will not release the source!
I have builted and now i'm testing phase a custom rom with xposed and several modules.. Pre root and many of my several ticks...
ghost45 said:
Vernee will not release the source!
I have builted and now i'm testing phase a custom rom with xposed and several modules.. Pre root and many of my several ticks...
Click to expand...
Click to collapse
did you built your ROM on the original sources or on lineageOS? Thx
Gesendet von meinem Bluboo Maya Max mit Tapatalk
JRapsky said:
did you built your ROM on the original sources or on lineageOS? Thx
Gesendet von meinem Bluboo Maya Max mit Tapatalk
Click to expand...
Click to collapse
Yes usually i make a custom rom based the official firmware.. Lineage os i don't know.. I never use it.
Related
How to install a custom recovery image and root access on MediaTek based UMI smartphones without loosing your data
This is a general solution for all MTK UMI phones, so you won't find all needed resources (ROM packages) here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This tutorial will guide you through the process of installing a custom recovery image on your MediaTek based UMI smartphone and then get root access (if needed) with the assistance of the custom recovery.
Please note:
- Custom recovery images of different Android versions are not always interchangeable. For example, you can't install an Android 5.0 recovery on a 4.4 system and so on.
- At most of the devices, after flashing the TWRP image, first you have to boot into recovery (TWRP) or the stock recovery will be restored.
- At some devices, after flashing TWRP, first you have to root your phone (install SuperSU) or it won't be able to boot into the system.
- Once you've rooted your device, you won't be able to install OTA updates anymore but the only way to update your phone is flashing with SP Flash Tool. Flashing a stock ROM (with the stock recovery) will make you able to install OTA updates again.
- At some devices (or specific ROM versions), when powering on your phone to boot into TWRP (power + vol-up), after about 3 seconds, you have to release the power button (even if your screen is still black) and keep only the vol-up button pressed until the TWRP welcome screen pops up or the recovery will be skipped and your phone will boot into the system.
What you need:
Driver for Preloader USB VCOM mode: Windows 10 already can automatically install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe
SP Flash Tool application: SP_Flash_Tool_v5.1712.rar
An SPFT ROM package for your specific device, that you can download in UMi's ROM section.
A custom recovery image that fits your phone:
UMI Zero: UMI_ZERO_TWRP_2.8.2_recovery.img
UMI eMAX: TWRP_2.8.1.0_UMI_EMAX_4.4.4_284X_v2_recovery.img for Android 4.4 or UMI_eMAX_TWRP2.8.7.0_lollipop.img for Android 5.x.
UMI Hammer: UMI_Hammer_TWRP_2.8.7_recovery.img
UMI Hammer S: HammerS_TWRP_2.8.7.3.img (not tested on real device)
UMI Fair: CWM_Umi_Fair.img (created by megthebest)
UMI Iron: UMI_Iron_TWRP_2.8.7_recovery.img
UMI Iron Pro: UMI_Iron_Pro_TWRP-2.8.70_recovery.img (created by megthebest)
UMI Rome: TWRP_2.8.7_Umi_Rome.img (created by megthebest)
UMI Rome X: TWRP3.0.0RomeX.img (created by megthebest)
UMI Touch: Touch_TWRP_3.0.2.img or CWM_6.0.5.1_UMI_touch.img
UMI Touch X: TWRP_302_for_UMI_Touch_X_201605171.img (created by megthebest and jemmini)
UMI Super: TWRP_3.02_UMI_Super.img (created by megthebest and jemmini)
UMI London: TWRP_302_UMI_London.V3.01_20160612.img (created by jemmini)
UMI MAX: TWRP_302_UMI_MAX.V1.01_20160819.img (created by jemmini)
UMI Plus: TWRP_302_UMI_PLUS.V3.01_20161019.img (created by jemmini)
UMI Plus E: PlusE_TWRP_303_V3.01_20170112.img (created by jemmini)
UMI Z and Z Pro: TWRP_303_UMI_Z.V3.01_20170116.img (created by jemmini)
UMIDIGI C Note: C_Note_TWRP-3.1.1-0_NoTouch.img (created by joe2k01) - no touch screen support, you can control it with an OTG mouse (use a wireless one)
Newer models will be added later.
Super SU installation package: SuperSU-v2.82-201705271822.zip or you can find the latest versions HERE
Now I'm going to guide you through the whole process, using a UMI Touch and TWRP recovery.
You can use the same method on other models but the UI and some features of the CWM recovery are different.
Charge the battery of your phone to at least 50% and turn it off before starting this process.
1. Install the MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe driver (if your system cannot download and install the drivers automatically).
2. Extract the SP_Flash_Tool_v5.1712.rar file and run flash_tool.exe.
3. Extract the content of the ROM archive, that you downloaded for your specific phone in the ROM section.*
*Beside the recovery image file, just only a compatible scatter file is mostly enough for this process but not always without editing it. So please strictly follow the instructions below and use a full ROM package together with the scatter file inside its folder. Don't use a such setup where not all partitions are loaded.
4. Open the scatter file, that you can find in the ROM folder.
5. Leave only the recovery line checked, then double click on its Location field and brows for your device specific custom recovery image file, that you can find in the list above.
6. Click on the Download button and connect your phone to a USB port of your computer. The flashing process will start automatically and it needs just a few seconds.*
*At some models you have to press one of the volume buttons while connecting to USB but most of them don't need it and you mustn't press any of the buttons.
7. Now the custom recovery has been flashed. You may remove the USB cable. You can boot your phone into recovery by powering it on while pressing the volume up button. After your phone is powered on, release the power key but still keep the vol-up button pressed until the TWRP boot screen pops up.
At some models this action starts the bootloader mode and you can boot into recovery from its menu. In such menus you can navigate with the vol-up button and select an item with the vol-down button.
*At some models you HAVE TO boot your phone into recovery at the first power on that follows the TWRP flashing or the original stock recovery will be restored by the system. So that's always better to start with booting into recovery after the flashing process finished.
Root your phone by SuperSU with TWRP
Step 1.
Boot your phone into recovery and connect it to a USB port of that computer, where you store the downloaded SuperSU installation zip file. Copy that file to the Internal storage of your phone. After finished, you may remove the USB cable.
Step 2.
Select Install - Before you process the further steps, I suggest you to make a backup of your Data and Nvram partition or the whole system.
Step 3.
Select the Internal Storage, then brows for the SuperSU .zip file.
Step 4.
On the next screen don't check any of the options, just swipe right the bottom slider to start the installation process.
Wait until the installation finishes. It needs just a few seconds, not a long time.
Step 5.
Click on Wipe cache/dalvik (swipe right), then Reboot System.
Warning! Don't wipe the cache if you use a not fully compatible TWRP image (such ported ones without touch screen support and with other bugs), just select Reboot System or your action may drive to a boot loop.
Step 6.
Wait until your system boots up. Now your phone has root access. You can check your status with Root Checker.
All the screenshots are captured and the guide is written by me for UMI users. Unauthorized copy of this content is prohibited.
Please let me know if you find errors or missing info.
Thank you for your attention,
bencebacsi
Umi Super?
chaoscreater said:
Umi Super?
Click to expand...
Click to collapse
Yes... same here... UMI Super!?
That phone isn't being shipped yet, is it? Can't know without trying.
aPexalpha said:
That phone isn't being shipped yet, is it? Can't know without trying.
Click to expand...
Click to collapse
It is shipped since 2 weeks or though.
I have one in my hands living in Germany and got delivered last week...
chaoscreater said:
Umi Super?
Click to expand...
Click to collapse
UMi Super has been added to the list
Very nice tutorial
---------- Post added at 04:36 PM ---------- Previous post was at 04:24 PM ----------
Keep on sharing ?
Unlock Bootloader ?
Is it necessary to unlock the bootloader before starting?
Unlocking the bootloader on the UMI Super seems to be a problem....
Thanks
Umiuser said:
Is it necessary to unlock the bootloader before starting?
Unlocking the bootloader on the UMI Super seems to be a problem....
Thanks
Click to expand...
Click to collapse
The bootloader is factory unlocked at UMi Super but in accordance of rooting it doesn't make sense at MediaTek SoC based smartphones. If you have any kind of MTK phone, you don't have to unlock the bootloader for rooting.
Nice ! ! !
bencebacsi said:
Huge quote removed
Click to expand...
Click to collapse
:good:
Awesome guide! Can't wait to get my super to get this done!
i av issue wit the twrp recovery for my umi hammer s..its not responding to touch...
I need UMI Touch X custom recovery image file boss.......PLZ Can u help me????
polashbd2012 said:
I need UMI Touch X custom recovery image file boss.......PLZ Can u help me????
Click to expand...
Click to collapse
Added.
Hi,
Please add the UMI MAX recovery image. I want to root the phone and install ViperAudio for a system wide Equalizer.
Thanks.
kubafu said:
Hi,
Please add the UMI MAX recovery image. I want to root the phone and install ViperAudio for a system wide Equalizer.
Thanks.
Click to expand...
Click to collapse
i built Twrp for Max... but touch not working for kernel issue.. so you must use OTG mouse with Type C adaptor to use TWRP.
if you need, i will share soon.. or we need to wait a fix from my friend jemmini..
regards
kubafu said:
Hi,
Please add the UMI MAX recovery image. I want to root the phone and install ViperAudio for a system wide Equalizer.
Thanks.
Click to expand...
Click to collapse
Edit: Don't use the Super twrp for the MAX!
megthebest said:
i built Twrp for Max... but touch not working for kernel issue.. so you must use OTG mouse with Type C adaptor to use TWRP.
if you need, i will share soon.. or we need to wait a fix from my friend jemmini..
regards
Click to expand...
Click to collapse
Edit: I cleared the info for safety reason.
bencebacsi said:
Thank you but that doesn't needed. UMi MAX is the same phone as the Super, just with less ROM and RAM.
Click to expand...
Click to collapse
Different kernel indeed and different touch screen.. I messed up touch trying to use kernel from Super.. Now touch screen is messed up/uncalibrated and is not fixable anymore (touch firmware seems to be corrupted by kernel)... So i need how to restore Max to his brand new config, because flashing rom or making an hard reset didn't help.. I'm in contact with jemmini, to understand if is possible to restore corrupted touch firmware...
If you have some advice or tool to fix goodix touch screen, i will be grateful...Thanks
P. S. Twrp of Super messed up Touch Screen, so don't use it on Max
Sent by Mi5 64Gb
megthebest said:
Different kernel indeed and different touch screen.. I messed up touch trying to use kernel from Super.. Now touch screen is messed up/uncalibrated and is not fixable anymore (touch firmware seems to be corrupted by kernel)... So i need how to restore Max to his brand new config, because flashing rom or making an hard reset didn't help.. I'm in contact with jemmini, to understand if is possible to restore corrupted touch firmware...
If you have some advice or tool to fix goodix touch screen, i will be grateful...Thanks
P. S. Twrp of Super messed up Touch Screen, so don't use it on Max
Sent by Mi5 64Gb
Click to expand...
Click to collapse
Thank you for your information, it's very important and I'm sorry for your trouble.
I have the same issue with my MAX test device but I received it some weeks ago directly from UMi with an earlier ROM version, so I just thought, it's a pre-release, not the final version with a different touch panel. This case is very weird since the Super is perfectly compatible with the MAX ROM, even the touch screen as well. Actually the MAX V1.01_20160819 ROM is installed on my UMi Super test device and everything work fine. So, after completely formatting my MAX and installing the stock ROM again with SPFT, I didn't think the Super's TWRP recovery caused the issue. Now it's confirmed, so I'm continuing to find a solution.
Thank you again for your feedback.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Collection for Redmi Pro
DISCLAIMER
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
GUIDE FOR TWRP install & ROOT
Xiaomi Redmi Pro {ALL VERSIONS} TWRP download and Redmi Pro root
This guide will help you install TWRP and root Redmi Pro, the first step is to install TWRP custom recovery on the Redmi Pro. The process contains quite a few steps, but most of them take just a few seconds.
If it looks daunting, don’t worry, take each step one by one and you’ll come through with TWRP and a rooted Redmi Pro within just a few minutes.
Prerequisites and note
You must have an unlocked bootloader to follow this guide; flashing through fastboot requires an unlocked bootloader. If your Redmi Pro bootloader isn’t unlocked yet, go to the official Xiaomi unlock page to begin the process.
You need to backup anything you don’t want lost to your PC or a TF SD card; for TWRP to work, you may need to factory reset. You will lose all user data. Backup all important data BEFORE you flash the TWRP.{only if you choose twrp 3.0.20}
1. WHATS INCLUDED
PASSWORD IS"kristi6.9"
a.Auto installer for adb commands, adb drivers and fastboot commands– These are the tools that will allow your PC to communicate with your mobile.
View attachment adb-setup-1.4.2.zip
b.Redmi Pro TWRP custom recovery used for rooting and flashing custom ROMs onto Redmi Pro.-links below
c.Redmi Pro root SuperSU.zip– The SuperSU.zip used for rooting Redmi Pro through TWRP recovery(extract it to get supersu binary +supersuapk+supersu premium)link below
2. Install the adb drivers and fastboot commands
Extract the above download.
Run “adb-setup.exe”.
Hit “Y” to all 3 questions.
The Google adb driver installer will then popup. Go ahead and allow and install.
3. Prepare your Xiaomi Redmi Pro
Settings >> About phone >> Tap “MIUI Version” seven times.
Hit the back button. You should then be at the main settings menu.
Go to “Additional settings” >> “Developer options” >> “USB Debugging”.
A warning will pop up. Go ahead and allow.
Plug your phone to PC via USB cable.
You should then see a pop up request on your Redmi Pro to give your PC USB debugging permissions. Go ahead and allow.
4. Copy the TWRP and open the command window
Open Windows Explorer and go to “c:/adb”.
Copy “twrp.img” to “c:/adb”.
IN A BLANK SPACE (not on a filename etc…), hold SHIFT while RIGHT-CLICK
Select “Open command window here”. You should then see a small black window open.
5. Boot into bootloader and fastboot flash the TWRP
In the black command window type “adb reboot bootloader”. Hit Enter. Wait about 10 seconds and you should then see your Redmi Pro says “Fastboot” along with the Xiaomi Mascot.
In the black command window type “fastboot flash recovery twrp.img”. Hit Enter.
You should then see that the file has flashed successfully (OKAY). It all takes just a second. (see pic and video)
6. Boot into TWRP
In the black command window, type “fastboot reboot”. Do not hit Enter yet.
Hold Volume Up on the Xiaomi Redmi Pro while hitting Enter on your PC.
Continue holding Volume Up for about 30 seconds until you see TWRP has booted.
BAM! You’re now booted into TWRP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Method 2: If you have twrp already installed
1.Put twrp.img in the phone storage
2.Boot on twrp recovery
3. Press install
4.Then install image
5.Check twrp.img in your phone storage
6.And slide to install it.
TWRP 3.0.2-0
Download this zip and extract it
View attachment twrp.3.0.2.0.zip
or download from here
Link here
BUGS
Code:
FIRST RUN CAN SHOW {error mounting}-can be fixed by formatting data
TWRP 3.0.2-2
Download this zip and extract it
View attachment twrp.3.0.2.2.zip
or Download Mega apk from play store
Link on Mega
BUGS
Code:
1.DOESN'T SUPPORT 4GB/128GB VERSION
2.CAN'T SEND FILES WITH MTP
TWRP 3.0.3-0
Download this zip and extract it
View attachment twrp.3.0.3.0.zip
or download
Link here
BUGS
Code:
Yuo tell me
TWRP 3.0.2-0 by @end222
Note: It is ported from Vernee Apollo Lite by @end222-[thanks for everything].
To download go HERE
TWRP 3.1.0 by @end222
Note: THIS IS THE MOST RECOMMENDED version.
To download go https://xiaomi.eu/community/threads/twrp-3-1-0-by-end222.39179/
ATTENTION AFTER INSTALLING TWRP YOU SHOULD INSTALL SUPERSU OR FLASH A CUSTOM ROM ( xiaomi.eu for example)
Root your Xiaomi Redmi Pro
Now that your TWRP is functioning, you can easily root your Xiaomi Redmi Pro.
Download this View attachment SuperSu.zip
Connect Redmi Pro to your PC.
TWRP main menu >> Mount >> Mount USB storage. The Redmi Pro should then show up in Windows File Explorer under This PC / My Computer.
Copy the SuperSU.zip to the root of your Redmi Pro. and extract it.
Now you have supersu apks +supersu2.79.zip (that should be flashed)
TWRP main menu >> Install
Assuming you have the Supersu.2.79.zip. in the base of the internal storage, you should see it at /sdcard. If it’s in another directory, then navigate to whichever directory you extracted the Supersu.2.79.zip to.
Select the Supersu2.79.zip
Swipe to confirm the flash
Credits:
@kristi6.9 #Me for posting ---HIT THANKS
#hanuma50 for twrp 3.0.3.0
Xda Developers #for the forum
BrianAbad #for posting twrp 3.0.2.2 on Miui Forums
@daohoa #for it's first twrp build
Upgrade from TWRP => INSTALL > INSTALL IMAGE >>> check Recovery
any bug fixes ?
The bug fixes:
criszz said:
Upgrade from TWRP => INSTALL > INSTALL IMAGE >>> check Recovery
any bug fixes ?
Click to expand...
Click to collapse
-No more need to format data
-It starts directly in english language
this twrp does not suits for 4/128 version.
on 128g, twrp can not recognize data and storage partitions so it can not make a full wipe to these partitions. So after installing xiaomi.eu rom from any official rom, a lot of programs crashes and gives error. no possiblity to use phone.
thanks for information
sokomind said:
this twrp does not suits for 4/128 version.
on 128g, twrp can not recognize data and storage partitions so it can not make a full wipe to these partitions. So after installing xiaomi.eu rom from any official rom, a lot of programs crashes and gives error. no possiblity to use phone.
Click to expand...
Click to collapse
I use a 3/32gb version and didnt know this problem..I will re-edit post
just noticed i cannot copy twrp bakup, created with this version, from internal to pc with mtp(phone on)
working if backup is on sd-card but not on internal
working when use mtp from twrp
i switced back to first twrp.
criszz said:
just noticed i cannot copy twrp bakup, created with this version, from internal to pc with mtp(phone on)
working if backup is on sd-card but not on internal
working when use mtp from twrp
i switced back to first twrp.
Click to expand...
Click to collapse
I'm sorry but I dont own this project Im just posting it .
not a problem mate, just for people to know
Can we flash incremental OTA update with this TWRP? Also do we need to flash any additional zip file while flashing OTA update?
criszz said:
not a problem mate, just for people to know
Click to expand...
Click to collapse
ok?? thanks for sharing
sakibshahriyar98 said:
Can we flash incremental OTA update with this TWRP? Also do we need to flash any additional zip file while flashing OTA update?
Click to expand...
Click to collapse
? I dont know if we can flash OTAs but I believe not.......if you want you can test it and reply me...?
twrp 3.0.3.0 is out but i don't have account ( i have account but i cannot read capcha, i'm not russian) to download >>> https://translate.googleusercontent...JrhiSRckpRu0LTM8MC6hL3AaPTVYapA#entry57345595
criszz said:
twrp 3.0.3.0 is out but i don't have account ( i have account but i cannot read capcha, i'm not russian) to download >>> https://translate.googleusercontent...JrhiSRckpRu0LTM8MC6hL3AaPTVYapA#entry57345595
Click to expand...
Click to collapse
You can download twrp 3030 from 4pda below
I have not tested it, just sharing.
http://www.filedropper.com/twrpomega3030
kremmit said:
You can download twrp 3030 from 4pda below
I have not tested it, just sharing.
http://www.filedropper.com/twrpomega3030
Click to expand...
Click to collapse
any changelog from previous build??
kristi6.9 said:
any changelog from previous build??
Click to expand...
Click to collapse
Can't find the changelog for the new version.
But it seems to be green in color.
kremmit said:
Can't find the changelog for the new version.
But it seems to be green in color.
Click to expand...
Click to collapse
ok...thanks however?
Error mounting memory via recovery. Thanks for corrected
fays91 said:
Error mounting memory via recovery. Thanks for corrected
Click to expand...
Click to collapse
what version.....
try formating data....
I use your rom version and install
But if I go into recovery and I upgrade the memory can not copied files on
fays91 said:
I use your rom version and install
But if I go into recovery and I upgrade the memory can not copied files on
Click to expand...
Click to collapse
i didnt understood u...
can you tell me the twrp version 3.0.2.0~3.0.2.2~3.0.3.0
......and describe your problem better
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Supported Devices: Oppo F3 Plus (CPH1613EX) & Oppo R9s Plus (CPH1611EX)
Caution:
Please disable Antivirus for any false Detections
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery:
1. Download Drivers and install them (Disable Signed Driver Enforcement)
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo R9s Plus/F3 Plus Marshmallow Firmware (CPH1611EX_11_A.16_180106) and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/file/d/1xo-J5Pe65-fXyJbysVrAZYQ1mocfl53s/view
2.1 Also Download Oppo A57 Firmware and extract it anywhere you like
https://drive.google.com/uc?id=0B_0XnEjFCVsPWndzSnp2YTFYSkU&export=download
3. Download TWRP Recovery - Keep the recovery img in the same folder as of extracted firmware folder and make sure recovery file name is set to "recovery.img"
Twrp 3.1.1-0 (Latest) - Material Theme and Inbuilt Super SU Root available for easy rooting BUT Chinese language
Download and Extract only recovery.img and place it under firmware folder. u can delete other files.
https://drive.google.com/file/d/1gkNNx2Ik6oRF-juBDNIilDUu31w6_oI_/view?usp=sharing
To change the chinese language to english please download and flash this zip But in English language you will not get Super SU Root option to root the device from built-in twrp. you have to download SU zip now. So root directly from chinese language and then flash the english language zip to be on safe and easy side
https://androidfilehost.com/?fid=817550096634752414
Twrp 3.1.0-0 (old) (RECOMMENDED) -
Normal appearance of twrp and no inbuilt SU (sometimes it prompts to install SU, if you decline once, it won't prompt again) and totally English language. Most importantly you can flash opposite OTA updates (ozip) via this twrp
https://www.dropbox.com/sh/qbobokagdgme2oa/AABQBtKTmbwChne9z1DaayHca?dl=0&preview=recovery.zip
4. Run the MsmDownloadTool from A57 Firmware folder and you will get Session Timeout error. just ignore it and close the software
4.1. Now run MsmDownloadTool from our F3 plus firmware folder and uncheck "Reset After Download"
5. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5.1 After plugging to pc, open device manager and expand PORTS section and make sure the device is detected as "Qualcomm HS-USB QDLoader 9008 (COM xx)". if not you have drivers issues!
6. Press F5, uncheck all options except Recovery and double click on Recovery option and select the recovery.img from firmware folder.
7. press Start and Flashing will be success (Green color message). press stop and unplug the usb
8. Press and hold Vol Up and Power Button and release them when it vibrates. NOW IMMEDIATELY after seeing oppo logo AGAIN PRESS Vol up + Power button to Power Off your device to prevent booting!!!! (If you fail to turn off your device, mobile will boot and will auto restore the stock recovery. so you will have to re-flash the twrp again)
9. Now press Vol Down + Power button to Enter into TWRP
BONUS - Stock Recovery & New OTA Update
Stock Recovery build: CPH1611EX_11_A.16_180106
https://drive.google.com/open?id=1u2Td1g93FwyAdPuKYNqz_iMHAYMpwrwJ
New Build Version: CPH1611EX_11_A.18_180413
Flash this zip via twrp. if it gives error 7 please ask in comment section
https://drive.google.com/open?id=1UA_DEjSQ4ESQO22VuvEpBsZhW9UepafY
else, flash this ozip from stock recovery
https://drive.google.com/open?id=1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3
ROOTING
Screenshot: No more red line
Boot into TWRP by Holding Vol Down + Power Button
TWRP 3.1.1.0 - Go To Advanced option (Last but one option), Tap on last option: Super SU Root and Swipe to flash
UNROOT: just uninstall the SuperSU app to remove root
TWRP 3.1.0.0 - Download this zip and copy to storage and flash it
https://drive.google.com/open?id=1dIa9jRgh5Jy_cayM4QuOw8nL8ma574jU
UnRoot: Open SuperSU>Settings>Full UnRoot.
Note: After Rooting via twrp your device might reboot twice. dont worry. its not a bootloop. its a sign of success
XPOSED FRAMEWORK - Fix Red Statusbar Warning
Screenshot:
1. Download and add extension (.zip)
https://www.dropbox.com/s/e35zeqf619...bar FIX?dl=0
2. Boot into TWRP and flash the xposed framework zip and reboot (Reboot will take about 15mins. Please dont think its a Bootloop. Have a nap)
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled or leave it as deafult or if you know chinese you can choose what you want
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
Optional:
IMEI Backup
goto twrp and backup EFS partition
you can also backup using this easy method via pc : https://forum.xda-developers.com/on...click-backup-restore-efs-oneplus-one-t3150883
CREDITS:
Xda, Baidu, bbs.7to.cn
used couple of links and very useful thread: https://forum.xda-developers.com/android/help/how-to-root-oppo-r9s-plus-cph1611-t3609586
@Rimo4099 for sharing 100% working twrp recovery.img
@john_david9000 - For sharing valuable information
@wuxianlin - He is the one who ported twrp :fingers-crossed:
@cjkimlaysico - he gave the instructions to run the msm tool (hard part)
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much ☺
verydp1 said:
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much
Click to expand...
Click to collapse
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
i can't access the download link for msm download tools, help pls sir
shepherd80 said:
i can't access the download link for msm download tools, help pls sir
Click to expand...
Click to collapse
damnnn. something is not legal by sharing that specific file maybe bcoz of paid or cracked content. idk
first please try to flash with stock msmdownloadtool.exe which u get by extracting firmware. if it doesnt work then you need cracked msmdownload tool
iHeymanth said:
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
Click to expand...
Click to collapse
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
verydp1 said:
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
Click to expand...
Click to collapse
show you what ? i dont understand ur first line.
yes, similar to remove the yellow line but not yellow line. just similarly red line will remove. we can also remove the captcha codes and yellow warning lines of developer options etc.. im figuring out to test in f3 plus
iHeymanth said:
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Caution:
1. Please disable Antivirus for any false Detections
2. After getting Rooted, the statusbar will turn into Red cautioning about root access
check the screenshot
Note: Downloading Firmware is an Optional thing to Install only Recovery. If you want to install both Rom and Recovery then Download the firmware files too
TWRP Recovery:
1. Download Drivers and install
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo F3 Plus Marshallow Firmware and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/open?id=0B5ZISKae4wQKeEdfbGNOT3lDa28
3. Download the Tool. zip (extract it) and Recovery.img and place it under the Firmware's FOLDER (step2)
msmdownloadTool link is down. find the cracked tool in google or crack the stock tool manually by this tutorial : techzai.com/crack-msmdownload-tool/
https://drive.google.com/open?id=13AKVz94x6w4-GaSnPTXzgCoGjwm2QqpQ
4. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5. Run the MsmDownloadTool and Load the extracted Firmware from folder (.ofp)
6. Press F5, uncheck all options except Recovery and double click on recovery to Browse the recovery.img
7. press Start and Flashing will be done.
Holding Vol Down + Power Button will boot into Recovery
To Avoid Signal Loss/ IMEI Missing in future, please boot into twrp and take a backup of EFS Partition
ROOTING
Boot into TWRP by Holding Vol Down + Power Button and Flash the SU or Magisk
find the zip somewhere in xda. i will post it later. sorry
Please check the Video tutorial for this Rooting process
I will try to post a clean video tutorial. stay tuned!
FIX to Red Statusbar Warning (Screenshot)
1. Download the zip below and extract them
https://drive.google.com/open?id=1hVLLigAks6ltcHrPL21L5hqDgkUKSwv5
2. Boot into TWRP and flash the xposed framework zip and reboot
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
CREDITS:
Xda and Developers who made all these zips/apks
@Rimo4099 for sharing the 100% confirmed recovery.img, video tutorial, screenshot and installation steps
@john_david9000 - For sharing valuable information to confirm the source of this recovery img
@Wuxalin - according to info that John david provided me, i believe this recovery is exactly same as OPPO R9S recovery by wuxalin
Click to expand...
Click to collapse
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
john_david9000 said:
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
Click to expand...
Click to collapse
i think i have the nougat recovery. testing in progress now. will let you know
edit: tested nougat recovery of r9s/r9sk but FAILED
tested windows 10 method of flashing via MiFlash tool. flashing goes success but mobile keeps vibrating but no life
tested twrp 3.1.1.0 and 3.1.0.0. both are working fine but the latest twrp is in chinese language. will figure out to change its language
only windows 7 with msmdownload tool method is working.
Good news:
Root > Magisk v16.0(latest stable) is working flawlessly
Will update OP with magisk installation steps
note: backup ur internal memory in advance xD xD
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Re: So, i flashed my oppo with the msmtool that you put on your post (all images expect datauser partition), and changed the recovery image before the phone boots..... and it woorks perfectly now.
PS: dont upgrade to the version CPH1613EX_11_A.18_180413 if you want root your phone, it won't work.
EniMaX said:
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Click to expand...
Click to collapse
Did you uncheck "Reset After Download" option in msmtool ?
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
EDIT: when i downgrade the rom, it worked perfectly
NB: after downgrading , the first time, the phone boot directly and it was the new version (wich causes me problems) that was on it, even when i had flashing all the system
EniMaX said:
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
Click to expand...
Click to collapse
1. U need to uncheck reset after download option to not let the tool to reboot it phone into os
2. I have upgraded to a.18 build via ota 65mb and root worked. Tested with my own hands
3. Caution: if you dont CHECK userpartition in msmtool, after reboot it asks for Android password to proceed and we don't know that password. It's a checkmate. You need to wipe everything to boot
4. If you have patience please flash Magical 16.0 and test it. For me Wi-Fi is not turning on after flashing magisk.
5. I suggest you to use the twrp 3.1.0. bcoz the latest 3.1.1 does not flash oppo ota (.ozip)
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
I forgot to take backup of that 65mb Ota. Sorry. I will restore stock recovery in sometime and will download that 65mb ota
Does our oppo camera supports camera2api feature?
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
EniMaX said:
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
Click to expand...
Click to collapse
I have enabled it to check pixel cameras to work but failed.
also if ur willing to do then please enable multi window in ur rooted marshmallow (build prop and developer mode method)
I tried but no multi window option enabled in recent apps
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
OTA link for CPH1613EX_11_A.18_180413 (65mb)
Can use this 65mb ota if you are in A16 or A17 build versions
https://drive.google.com/file/d/1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3/view?usp=drivesdk
(Resized to fit the XDA thread for mobile phones)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, my name's SmallTarzan (@dotMiracle at Telegram), and I'm here to do it once again - to write yet another guide.
But, why am I doing this? There are two other guides already that explain the installation process well.
Well, I've gone through them, and the first one was not clear to me, I had to read it several times to properly understand the guide. I think that's, especially for new users, not helpful. The other one was written quite well, (shoutout to @madsponge26).
So, here I am, with my little bit to add to this, so far quite empty, sub-forum.
- an unlocked bootloader
- a TWRP recovery image
- a GSI image of your choice
- an Encryption Disabler - the current build of TWRP cannot decrypt your data
The process of unlocking the bootloader is the same on all Xiaomi devices. (Not counting the Android One ones.)
This process factory-resets your phone.
-
0. Open your phone's settings, go to About Phone at the top, find "MIUI version (For POCO)", and tap on it 7 times. (You should see a notification at the bottom, that you are now a developer.)
0.1 Go back, scroll down to Additional settings > Developer Options > Check "OEM unlocking" slider, (it may ask you for your password). Also, open "Mi Unlock status", agree to the permissions, and click on "Add account and device".
0.2 After this, you have to wait for 72 hours to unlock your phone. (Xiaomi Security Procedure)
-
1. Head over to Xiaomi Unlock Tool website, register, if you haven't yet, and download the tool.
2. Open the tool, accept the agreement, log in, and connect your device via USB-C cable to your computer.
3. Now, we'll need to reboot our device to fastboot: Turn off your device completely, hold down power button + volume down button at the same time, until you see a green logo of "fastboot".
4. The tool should now detect the device, press the Unlock button.
At the moment, there's only one TWRP recovery image available for this phone.
0. Currently, the TWRP cannot decrypt your data, make sure to back it up beforehand.
-
0.1 Download the Encryption disabler
0.2 Download ADB tools (Also, run the .exe, let it install all the required files, the driver from Google too.)
0.3 It's recommended to remove your screen-lock before doing this.
1. Reboot your device to fastboot again: Turn off your device completely, hold down power button + volume down button at the same time, until you see a green logo of "fastboot".
1.1 Connect your device to your computer.
2. Open your ADB folder, shift+right click on an empty space in the folder, choose open a Powershell/Command prompt window. (The folder should be located at C:/adb, or in the root of your system drive /adb.)
3. Now, put the recovery image you've downloaded in the ADB folder.
4. Type: fastboot flash recovery twrp-3.2.3.0-beryllium-20180831.img (You can, optionally, rename the file to recovery.img to make the typing easier for you.)
5. Once the process completes, hold down the power button + volume up button. (Your device may even restart twice, hold these buttons until you see the TWRP recovery screen.)
6. Allow modifications, if prompted.
7. Go to Install > select the DisableForceEncryption_Treble.zip > Swipe to flash it.
8. Once that's done, go back to the main screen (by using the on-screen buttons), Wipe > Advanced Wipe > Select Data > Swipe to wipe.
9. Go back to the main screen again, Reboot > Recovery.
(Android P for Poco F1. For those who didn't get the pun.)
0.1 Let's get the image we want first. Head over to the: Treble-Enabled Device Development, and choose the OS you'd like.
For the sake of this tutorial, and obviously, the header with Android P in it, we'll use one of the P GSI images. I, personally, like the ArrowOS.
0.2 Reboot into recovery, and connect the device to your computer.
1. Download the ArrowOS-9.0-OFFICIAL-GSI-A.zip to your computer. (Or any other .zip you'd like to install.)
2. Unzip the file with WinRAR or 7zip.
3. Copy the .img file to either your SD card, or your internal storage.
4. Install > On the bottom right "Install Image" > Find the .img file > Tap on it.
5. Select partition System/System Image > Swipe to flash.
6. This might not be necessary, but I highly recommend flashing the DisableForceEncryption_Treble.zip again.
6.1 If you don't need root, reboot the device. (Reboot > System)
0. You may, as well, reboot the device first, and do the setup, in order to avoid any potential issues.
1. Download the latest stable version of Magisk.
2. Reboot to recovery.
3. Install > Find Magisk-v17.2.zip (make sure you selected "Install zip" at the bottom right) > Find the .zip file > Swipe to Flash.
4. Again, it's recommended to flash the DisableForceEncryption_Treble.zip.
5. Reboot > System.
@madsponge26
@Shivam Kumar Jha - used his TWRP image in this guide.
@ganesh varma - used his ArrowOS GSI in this guide.
No sound/Broken sound/Low volume temporary fix: here.
For GApps, you can download them here. Flash them through the TWRP recovery.
Reserved.
EDIT: The guide works for both MIUI 10, and P custom GSI ROMs.
Also, search for GSI A images.
Thanks @SmallTarzan for the tutorial. I will try it.
Starred for later reference when I finally got this phone.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
This is the first guide i actually understood. Thank you for that. I've one question though, the OS you suggested, is it stable for poco f1. I'm actually new to a treble device so i don't actually know how it works. Thank you once again for this guide.
Hello, thank you for your guide it's really very well explained with enough details that any newb can understand.
Btw, i have suggestion for your thread title, if you want you should rename your thread title to "[GUIDE]Install Any Android P GSIs In Your Poco"
Its just my suggestion cause i think it's better to follow the correct proforma:silly:
Anyway, have a nice day.
Regards,
Ali.
u_knw_who said:
This is the first guide i actually understood. Thank you for that. I've one question though, the OS you suggested, is it stable for poco f1. I'm actually new to a treble device so i don't actually know how it works. Thank you once again for this guide.
Click to expand...
Click to collapse
I haven't tried it yet, I'll do a test tommorow, and I'll let you know the result.
Ali Haide 001 said:
Hello, thank you for your guide it's really very well explained with enough details that any newb can understand.
Btw, i have suggestion for your thread title, if you want you should rename your thread title to "[GUIDE]Install Any Android P GSIs In Your Poco"
Its just my suggestion cause i think it's better to follow the correct proforma:silly:
Anyway, have a nice day.
Regards,
Ali.
Click to expand...
Click to collapse
Done, thanks!
Thanks for your well made guide. I just wonder how well everything works with these GSI images. Usually some features don't work.
Tomatot- said:
Thanks for your well made guide. I just wonder how well everything works with these GSI images. Usually some features don't work.
Click to expand...
Click to collapse
I haven't faced any issues.
SmallTarzan said:
I haven't faced any issues.
Click to expand...
Click to collapse
is gcam and face unlock working with you?
adityajiwap said:
is gcam and face unlock working with you?
Click to expand...
Click to collapse
I'll let you know later today.
@SmallTarzan,
I didn't see Treblizing step ..... Does it mean this Poco F1 is Treble enabled already?
don´t have sound.
Anyone have the same problem?
yis221 said:
@SmallTarzan,
I didn't see Treblizing step ..... Does it mean this Poco F1 is Treble enabled already?
Click to expand...
Click to collapse
Yes, it is.
detritu5 said:
don´t have sound.
Anyone have the same problem?
Click to expand...
Click to collapse
Correct, it's a bug currently present on some treble ROMs.
https://forum.xda-developers.com/poco-f1/how-to/temp-audio-distorted-p-gsis-fix-t3839427
Good stuff, five stars for you my friend for putting in the effort to help the rookies
is face unlock working?
ganyguru said:
is face unlock working?
Click to expand...
Click to collapse
Not in treble roms as of now.
detritu5 said:
don´t have sound.
Anyone have the same problem?
Click to expand...
Click to collapse
use global stable rom as base before installing GSI. it should fix it
u_knw_who said:
Not in treble roms as of now.
Click to expand...
Click to collapse
is there an apk for the facescanner in the stock rom?
Running PixelExperience 8.1 GSI. Had a problem on the google initial play service setup. google came up with a message that my device is uncertified and I had to register it at google to use the play service. Anyone else got that problem ?
It haves antirollback active.
CN Thread with info.
Direct Download Drive Mirror MEGA Mirror
Can someone make a tutorial post on how to install it?
souma_rox said:
Can someone make a tutorial post on how to install it?
Click to expand...
Click to collapse
It can be installed by original cn recovery, but i didn't try cause of anti-rollback
I hope they make global one to because its already 6 months with no updates...
is it global or chinese version?
Questafa said:
is it global or chinese version?
Click to expand...
Click to collapse
Chinese version.
Has anyone try whether gapps and twrp work on this rom?
I installed this ROM it has almost all languages, very good ROM only the gyroscope that didn't work
Enviado de meu Pixel 2 XL usando o Tapatalk
The installation's process and some details [TWRP, ROOT, GAPPS]
Hey!
I finally install and run the beta on my device. The process is very simple and easy to follow:
1. Get the stock rom on your device without root. You will have to do a full wipe of your data and cache from the Recovery. If you have installed a GSI (as me) you can simply use the Unbrick Tool shared on XDA. After that, just flash from a OTG device in the stock recovery the rom. It should install normally (I did it about three times). Let the device restart normally and configure it.
2. At this point, you will have your device working with the android 10 beta without Google Services and root. To get them, follow the next steps. In the developer's settings enable the usb depuration and reboot into the bootloader menu (if you are here, you don't need a guide to do this).
Once in the bootloader, you will have to type the next commands from a PC:
Code:
fastboot oem nubia_unlock NUBIA_NX629J
Code:
fastboot flash recovery [URL="https://forum.xda-developers.com/red-magic-3/development/recovery-unofficial-twrp-nubia-red-t3962482"]twrp.img[/URL]
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
You can extract the vbmeta.img from the package of the beta.
You should can boot the custom recovery without problems. There is an importante failure at this point. I can't acces to the data of the sdcard of my device. It could be a problem if you flash a wrong module in magisk and you can't delete it from the recovery.
To get the gapps working and root in the device, flash the "pico" package from the open gapps project page and flash the last version of magisk (maybe this could be the cause of the encrypted data in the twrp, I will be experimenting other options (the most evident thing is that the recovery is not the correct ones for this rom).
3. Just reboot the device and enjoy the new android 10 experience on Red Magic 3. You shold be able to proceed to finish the setup and install all the apps you want. The are some things that didn't work for me: some syncs with the google account (Google Keep, Calendar, etc.), auto-rotation (gyroscope), the music notification panel, various notifications, etc. You can't recover your apps and data from a past backup, the rom doesn't give the storage permission to the Google Play Services, so that's the problem. Just install them from the playstore. You will have to reboot one time before use the play store normally.
I hope the developers of Nubia could make a fully working global rom for this great device. Until then, we have this new option to get the best experience of RM3.
Important: If you just don't like the rom and you would like to downgrade to android 9, you will have to use the unbrick tool in order to avoid a softbrick caused by the anti-rollback system. I tried and it works, but after the program finished the unbrick process the phone started to boot into a black screen, only lighting up the led in a green colour. It was strange and I believed that my phone was bricked without possibility to recover it. After a few tries to reboot the device pressing the power button, I was able to boot without problems into the 2.07 global rom europe version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Perseo99 said:
Hey!
I finally install and run the beta on my device. The process is very simple and easy to follow:
1. Get the stock rom on your device without root. You will have to do a full wipe of your data and cache from the Recovery. If you have installed a GSI (as me) you can simply use the Unbrick Tool shared on XDA. After that, just flash from a OTG device in the stock recovery the rom. It should install normally (I did it about three times). Let the device restart normally and configure it.
2. At this point, you will have your device working with the android 10 beta without Google Services and root. To get them, follow the next steps. In the developer's settings enable the usb depuration and reboot into the bootloader menu (if you are here, you don't need a guide to do this).
Once in the bootloader, you will have to type the next commands from a PC:
You can extract the vbmeta.img from the package of the beta.
You should can boot the custom recovery without problems. There is an importante failure at this point. I can't acces to the data of the sdcard of my device. It could be a problem if you flash a wrong module in magisk and you can't delete it from the recovery.
To get the gapps working and root in the device, flash the "pico" package from the open gapps project page and flash the last version of magisk (maybe this could be the cause of the encrypted data in the twrp, I will be experimenting other options (the most evident thing is that the recovery is not the correct ones for this rom).
3. Just reboot the device and enjoy the new android 10 experience on Red Magic 3. You shold be able to proceed to finish the setup and install all the apps you want. The are some things that didn't work for me: some syncs with the google account (Google Keep, Calendar, etc.), auto-rotation (gyroscope), the music notification panel, various notifications, etc. You can't recover your apps and data from a past backup, the rom doesn't give the storage permission to the Google Play Services, so that's the problem. Just install them from the playstore. You will have to reboot one time before use the play store normally.
I hope the developers of Nubia could make a fully working global rom for this great device. Until then, we have this new option to get the best experience of RM3.
Important: If you just don't like the rom and you would like to downgrade to android 9, you will have to use the unbrick tool in order to avoid a softbrick caused by the anti-rollback system. I tried and it works, but after the program finished the unbrick process the phone started to boot into a black screen, only lighting up the led in a green colour. It was strange and I believed that my phone was bricked without possibility to recover it. After a few tries to reboot the device pressing the power button, I was able to boot without problems into the 2.07 global rom europe version.
Click to expand...
Click to collapse
Can I install this on red magic 3s?
does anyone know gyro solution for this ROM just missing that so you can use as daily ROM
Enviado de meu Pixel 2 XL usando o Tapatalk
Hi. I just installed the rom without formatting the phone and the code of the screen lock that was previously 6 figures has become 4 and they are not the first 4 of the previous one.
Does anyone know what it can be or am I going to have to format it?
Questafa said:
Hi. I just installed the rom without formatting the phone and the code of the screen lock that was previously 6 figures has become 4 and they are not the first 4 of the previous one.
Does anyone know what it can be or am I going to have to format it?
Click to expand...
Click to collapse
I don't see another option for your situation
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
akashc3303 said:
Can I install this on red magic 3s?
Click to expand...
Click to collapse
No. it's for RM3... I don't know if there is an android 10 beta for 3S
akashc3303 said:
Can I install this on red magic 3s?
Click to expand...
Click to collapse
For red magic 3s is that ROM https://bbs.nubia.com/thread-2578208-1-2.html
http://romdownload.nubia.com/红魔3S/V3.01/NX629J-update.zip
Enviado desde mi NX629J mediante Tapatalk
Thank you for your useful post. After reading it, I tried the ROM myself, with about the same results. Then I used the unbrick tool to reverse to Android 9.
Things that didn't work for me in the beta:
- Bluetooth kept restarting every 10 seconds, I couldn't use my Bluetooth headset
- Some incompatibility between the ROM and GAPPS, Google Play working only on occasions; after installing some stuff some apps refused to start ( Phone, Settings, Outlook etc).
It was an interesting experience, but it can't be used as the daily driver, at least not for me.
Detection 10 error
hoichemgio9x said:
Detection 10 error
Click to expand...
Click to collapse
What does it mean?
Nightpwish said:
What does it mean?
Click to expand...
Click to collapse
Button touch in YouTube, time screen , etc
Try V3.25
Perseo99 said:
Hey!
I finally install and run the beta on my device. The process is very simple and easy to follow:
1. Get the stock rom on your device without root. You will have to do a full wipe of your data and cache from the Recovery. If you have installed a GSI (as me) you can simply use the Unbrick Tool shared on XDA. After that, just flash from a OTG device in the stock recovery the rom. It should install normally (I did it about three times). Let the device restart normally and configure it.
2. At this point, you will have your device working with the android 10 beta without Google Services and root. To get them, follow the next steps. In the developer's settings enable the usb depuration and reboot into the bootloader menu (if you are here, you don't need a guide to do this).
Once in the bootloader, you will have to type the next commands from a PC:
Code:
fastboot oem nubia_unlock NUBIA_NX629J
Code:
fastboot flash recovery [URL="https://forum.xda-developers.com/red-magic-3/development/recovery-unofficial-twrp-nubia-red-t3962482"]twrp.img[/URL]
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
You can extract the vbmeta.img from the package of the beta.
You should can boot the custom recovery without problems. There is an importante failure at this point. I can't acces to the data of the sdcard of my device. It could be a problem if you flash a wrong module in magisk and you can't delete it from the recovery.
To get the gapps working and root in the device, flash the "pico" package from the open gapps project page and flash the last version of magisk (maybe this could be the cause of the encrypted data in the twrp, I will be experimenting other options (the most evident thing is that the recovery is not the correct ones for this rom).
3. Just reboot the device and enjoy the new android 10 experience on Red Magic 3. You shold be able to proceed to finish the setup and install all the apps you want. The are some things that didn't work for me: some syncs with the google account (Google Keep, Calendar, etc.), auto-rotation (gyroscope), the music notification panel, various notifications, etc. You can't recover your apps and data from a past backup, the rom doesn't give the storage permission to the Google Play Services, so that's the problem. Just install them from the playstore. You will have to reboot one time before use the play store normally.
I hope the developers of Nubia could make a fully working global rom for this great device. Until then, we have this new option to get the best experience of RM3.
Important: If you just don't like the rom and you would like to downgrade to android 9, you will have to use the unbrick tool in order to avoid a softbrick caused by the anti-rollback system. I tried and it works, but after the program finished the unbrick process the phone started to boot into a black screen, only lighting up the led in a green colour. It was strange and I believed that my phone was bricked without possibility to recover it. After a few tries to reboot the device pressing the power button, I was able to boot without problems into the 2.07 global rom europe version.
View attachment 5030877
View attachment 5030879
View attachment 5030881
View attachment 5030883
View attachment 5030885
View attachment 5030887
Click to expand...
Click to collapse
Hey Buddy,
You are on V3.22, Why don't you try V3.25 the latest one and share us your experiences.
I like your review. Thumbs up brother.
V3.25
jlorf7 said:
It haves antirollback active.
CN Thread with info.
Direct Download Drive Mirror MEGA Mirror
Click to expand...
Click to collapse
Could you provide us the latest update v3.25 link?
Thank you.