Hey Guys,
in the last weeks a problem with my USB-Port occured. About 2 weaks ago i was able to plug in an usb drive and backup my system onto it via twrp. Yesterday i wanted to refresh the backup and twrp did not recognized the drive. I restarted the phone, and flashed the newest version of twrp via odin. Still not recognizing any usb storage. Then i booted up and pluged the usb storge in ... still not detected.
Even when i connect the phone to my pc it is not detected. The only way to connect my phone to the pc, ist by using the download mode and flash something via odin.
Now I'm confused. Is the USB-port not working or is something wrong with the software. Should i flash a 4 Port firmware and install everything again?
And why the **** is the phone detected while its in downloadmode but not detected in any other mode (recovery, booted up, shutdown etc.) ?
I appreciate any advice
Flash Stock Rom
I tried to flash the stock rom and it didn't solve the problem.
Its so strange i can flash roms and recoverys using the download mode. But in any other mode the usb storage is not detected. Even beeing in the twrp i cannot get the an usb-stick to be detected. Actually im pretty sure the usb-port is broken, but as i said i appreciate every advice.
Last idea i have is to flash a 4 part firmware, but i not sure wheather this would change anything.
SeppGoPro said:
I tried to flash the stock rom and it didn't solve the problem.
Its so strange i can flash roms and recoverys using the download mode. But in any other mode the usb storage is not detected. Even beeing in the twrp i cannot get the an usb-stick to be detected. Actually im pretty sure the usb-port is broken, but as i said i appreciate every advice.
Last idea i have is to flash a 4 part firmware, but i not sure wheather this would change anything.
Click to expand...
Click to collapse
If different ROMs don't fix it then yes your USB is FUBAR. The functionality of low end operations such as download mode work because they use very little. Does it charge?/
Related
Hi
I have run into a small problem with my SGS 9000. I wanted to flash Insanity ROM 8.5 and ran into some problems so I restored my phone using Odin. I then booted into recovery and flashed a new modem and Kanity kernel 2.0. I then accidentally hit reboot before flashing the new ROM and now the phone won't boot (halts at the first SGS logo).
I can access download mode but not recovery. When I connect the phone to USB, Windows gives me a message that USB unit not recognized. This means I can't restore it using Odin.
I've tried taking out the battery for 5 minutes and changing computer/cable. I also uninstalled/re-installed the Samsung drivers and re-booted the computer a couple of times. Could it have something to do with USB debugging mode?
mate, open odin and the insanity rom....
then go to download mode on ur sgs and plug in ur usb, if alls well? reflash the Insanity ROM 8.5 again
That would work if Odin could discover the phone. I can get into download mode but the computer does not recognize the phone and thus I can not flash anything through Odin.
Could it have something to do with USB debugging mode?
no...
ur in a stivky situation, have u sorted it yet? ask a custom rom dev about it
lilmo22 said:
Could it have something to do with USB debugging mode?
no...
ur in a stivky situation, have u sorted it yet? ask a custom rom dev about it
Click to expand...
Click to collapse
Thanks, I'll do that I haven't had any progress, just endless hours reading various forums without any luck.
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Daniel_NC said:
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Click to expand...
Click to collapse
If you boot into DL mode and run odin on your PC does it fail to see the device?
apacseven said:
If you boot into DL mode and run odin on your PC does it fail to see the device?
Click to expand...
Click to collapse
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Daniel_NC said:
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Click to expand...
Click to collapse
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver http://d-h.st/vMk
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver ...
Thanks!! I'll give it a shot now.
Click to expand...
Click to collapse
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver......
Click to expand...
Click to collapse
Odin is not recognizing the device. Should I unmount or mount anything on the device for this to work properly? I have drivers installed.
Please i need help i m not sure what to do the problem is my phone suddenly started rebooting and went into loop and whenever i open playstore it tells me force close vending error and also my pc can t detect my phone sometimes it says device not recognized and sometimes it says can be used but nothing happening...
- downloaded kies all drivers nothing working
- tried changing cable but didn t work while on other samsungs it worked well nromal
- tried debugg mode mass storage everything that was suggested here in xda and on other sites
- z4root and gingerbreAk not working
Want to root it to flash better firmware vut since i can t detected on pc to root it i was trying to look for a root without pc
I m not sure what to do ... tried odin and download mode not working to detect device and also recovery mode cleared cash and rest factory not workin
Plz i don t want to lose my phone
My phone i9003 not rooted no custom room just only stock rom running gingerbeard 2.3.6
So the problem is the looping reboot that happens suddenly and unablity to connect it to pc to flash cmod 10.1
I was wondering if there is any way to repair/fix my phone or at least root it to flash better rom ?
Thank you very much
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
K9998 said:
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
Click to expand...
Click to collapse
but i can t connect my pc in all modes to use odin
Shady282 said:
but i can t connect my pc in all modes to use odin
Click to expand...
Click to collapse
I fixed it already.
try read this:
http://forum.xda-developers.com/showthread.php?t=1651619
I simply remove the internal memory and flash a custom phone image, it usable but without external memory.
If you cannot connect to the odin3, use Fastboot mode
Trying to get my mk908II up to 4.4.2 and saw that shinny 2.0 on KitKat Finless ROM 2.0 over @ http://freaktab.com/forum/tv-player-support/rk3188-devices/beelink-tronsmart-t428-mk908-etc and thought that must be the latest/greatest and flashed my mk908II with it, everything worked "fine" but no wifi or bt, now I'm thinking the 428 in the name = screw-up.
So on closer look MK908-II - Finless 1.6 ROM seems to be what I wanted, now how to get thar from har? Settings only has usb debug, no connect usb, so how do you connect via usb? Second method sd card update while holding update button gets twrp recovery not bulit-in update, is their a way to use the sd update, or can I flash from within twrp? None of the files seem to be zip updates which is the usual twrp update method??
Tried booting with the 4.42 sd rom and get at it that way, it has the "usb connect" but no usb debug, no dev. options at all it seems, so the computer sees it as a usd drive but not in the flash tool. Maybe I can copy the correct wifi drivers to the nand from here? If yes, any ideas on what exactly needs to be replaced??
Any guidance?? Thanks
So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help
ElDochart said:
So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help
Click to expand...
Click to collapse
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor
Click to expand...
Click to collapse
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.
ElDochart said:
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.
Click to expand...
Click to collapse
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.
ElDochart said:
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.
Click to expand...
Click to collapse
If you start kies and select emergency firmware recovery it will ask you to put your phone in download mode and connect it. Does kies recognise it then?
Sent from my SM-N930F using Tapatalk
Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.
ElDochart said:
Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.
Click to expand...
Click to collapse
Excellent news [emoji106] [emoji106]
Sent from my SM-N930F using Tapatalk