I was flashing a custom rom, when i couldnt install GAPPS, i tried rebooting my phone, and it didnt work. So i went into TWRP and formated the device. When i reboot it get stuck on the device cant be trusted thing (from unlocking the bootloader.) So i go into the Huawei eRecovery, and try to install software with Wi-Fi. However it says getting package info failed. My PC doesnt recognise my phone either.
Is there anything i can do, please help.
I managed to fix it in some way
I fixed it, its no longer bricked.
Repair 100%
i had my honor 8 so bricked that only worked the bootloader and what worked for me was:
https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l19-stock-t3696902
for someone who might need it
Related
Hi there,
Today i've received this tablet. All good and dandy until it notified me it has an update so obviously i've gone and do the update. Surprise.. after reboot, update installment and so on the device won't boot anymore at all, and recover mode doesn't work to enter.
I've found official ROM package on their site:
ftp.vonino.org/public/Firmware/Vonino_Tablets/Pluri%20Q8/Orange%20Version/Android%206.0/
Tablet can connect to the PC, but it isn't recognized because "some drivers" missing. How can i install this ROM on the tablet from my pc ?
Thank you.
Hi,
I can't find anything about it on xda or anywhere. You'll need to contact the manufacturer for drivers and instructions on flashing their firmware.
Good luck!
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
denede said:
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
Click to expand...
Click to collapse
Typically, on devices I know of, it's fastboot that you would use to flash factory images. So you should be good there. But again, I don't know if that is how your device works too. And it would also typically not matter what's been altered on your device, system wise, you would simply flash the appropriate images with fastboot.
So I'd still say you need to determine the correct procedure to flash the files you got from their site. Perhaps there site has instructions? Or a support number for help of its not working as it should?
I've talked with the support. They gave me a link with an official ROM, a different one that the one that was from the site. But they didn't even told how to use it, LOL.
Have the damn files and don't know what to do with them, OMG.
I've placed the zip archive on SD card and tried to use the option from rescue mode with 'update via sd card". The zip archive is visible but after i select it says Installation aborted :|
I've googled around and maybe my tablet needs to be at over 50% power... but it was plugged into the wall it should've worked.
edit: 100% and no good...
edit2: they sent me another e-mail with a pdf file in which it is explained how to flash their device.
Hi, I tried to get update from C185B320 to C185B560 through https://forum.xda-developers.com/mate-8/general/update-to-nougat-easiest-playstore-app-t3554957, but it didnt go well, so i rollback (coz people saying it works with lesser verison than C185B320) to C900B500 (i think, maybe B320).
Then i unlocked bootloader, installed recovery and twrp, then i tried to root my phone, but it didnt go well too. It only showed me that orange text, that it is unlocked and not safe or something like that, and device is booting in 5 sec, but never happened. I managed to somehow install back C185B160 (not sure how) and rooted phone correctly. Then i tried to rebrand to EU (C432) with guide https://www.youtube.com/watch?v=JZVsIKtdgV4. But at the end, i was getting C900B320, so i went back to C185B160 and it downloaded B560 update(with that app), so i was happy, put into DLOAD and started update, but it failed 5%, so i tried another update (C185B162) and after i put this into DLOAD and succesfully updated phone, it is not responding anymore. Display not working, phone not vibrating when restarting, led when it is plugged into the wall, or PC not lightning up. Only when working with SRK, or italian knife and reboot phone, it makes sounds when you disconnect your device from your pc and connect back in.
Can you please help me, i am pretty screwed up.
EDIT: ok i managed to get into the phone again, but my sim is not working (in DC phoenix is shown at the begining as Current version: NextL09C185EMUI50, but later as Build number: :NXT-L29C185B320, Product model: HUAWEI NXT-L29 how can i make my simcard working again?
Hi, how get back in your phone? i´m in the same trouble but i cant back in the fastboot or something again? Thanks in advance.
Federico
SEoR said:
Hi, I tried to get update from C185B320 to C185B560 through https://forum.xda-developers.com/mate-8/general/update-to-nougat-easiest-playstore-app-t3554957, but it didnt go well, so i rollback (coz people saying it works with lesser verison than C185B320) to C900B500 (i think, maybe B320).
Then i unlocked bootloader, installed recovery and twrp, then i tried to root my phone, but it didnt go well too. It only showed me that orange text, that it is unlocked and not safe or something like that, and device is booting in 5 sec, but never happened. I managed to somehow install back C185B160 (not sure how) and rooted phone correctly. Then i tried to rebrand to EU (C432) with guide https://www.youtube.com/watch?v=JZVsIKtdgV4. But at the end, i was getting C900B320, so i went back to C185B160 and it downloaded B560 update(with that app), so i was happy, put into DLOAD and started update, but it failed 5%, so i tried another update (C185B162) and after i put this into DLOAD and succesfully updated phone, it is not responding anymore. Display not working, phone not vibrating when restarting, led when it is plugged into the wall, or PC not lightning up. Only when working with SRK, or italian knife and reboot phone, it makes sounds when you disconnect your device from your pc and connect back in.
Can you please help me, i am pretty screwed up.
EDIT: ok i managed to get into the phone again, but my sim is not working (in DC phoenix is shown at the begining as Current version: NextL09C185EMUI50, but later as Build number: :NXT-L29C185B320, Product model: HUAWEI NXT-L29 how can i make my simcard working again?
Click to expand...
Click to collapse
First of all i tried unbrick via srk tool, but didnt work for me, si i used dcphoenix tool and it worked
Thanks, what tool of all of DCPhoenix?
SEoR said:
First of all i tried unbrick via srk tool, but didnt work for me, si i used dcphoenix tool and it worked
Click to expand...
Click to collapse
Hello guys..
I really have a problem right now! I appreciate everyone who tries to help me. I´ll try to expain what exactly is my problem with my Mate8.
Also I´d like to apologize for mistakes of gramatics, because im acutally from Germany..
So, my phone was working right, and actually everything was okay. With time it got so slowly, because storage was full with datas and so on. I tried to clean up some things to get it again a bit faster and so on, but that did not make it (at all). Also windows wont recognize the phone anymore. When plug in the USB it didnt even asked for data, charging or photos.. also I had problems with charging, it took toooo long for a few %.
I was on "KANGVIP" Rom (as much I know i changed stock to this custom rom) https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572
Time passed untill 3 days I decided to flash a new rom normally, like put rom on sd card, wipe dalvic and cache, and so on. I wanted this rom; Lineage OS https://forum.xda-developers.com/mate-8/development/6-0-1-cyanogenmod-13-port-t3512985
But everything came up with different errors for different actions I did like this:
"cant mound sd card"
"cant mount inernal storage"
"cant mount data"
"cant format data"
"cant mount system"
"cant mount cache"
etc. etc...
I tried to change file system to EXT3. EXT4, EXT2, FAT, and so on, for Data and System. Nothing worked correctly (but I had still on some Filestystems instead of 0MB like 2700MB). Still not working correct... On TWRP.
Then I tried to update TWRP from 3.0.1 to 3.1 (new one released). Because I saw, more precisely, I heard that an update can fix this mount issues I had.
Said and done, I updated it and instead of 3.1 I had 3.0.2 (idk why but I didnt care). But still theese problems happend.
So then I saw in a Video on youtube (which I cant find anymore) that another recovery like CWM can fix this issues. So I downloaded CWM recovery.img and installed it with TWRP an rebooted to recovery again. And now I´m in a situation, in wich I dont know what to do.
Now the phone tries to start, but no OS installed.
Try to get into Recovery, but no recovery aviable exept eRecovery which is failing with data when trying to restore.
Problem is also that Fastboot and ADB is not working. Installed HiSuite, ADB drivers, Samsung drivers (though could help).
Tried Knife Italian, but no connection to pc..
Tried different cable, no luck.
Tried windows 7, 8.1, 10 Home and now im on Win 10 Pro 64x.
All I can do is to boot into Fastmode, but cant do anything. And when I try to boot the phone normally it stucks on "Your device is booting now..." because no OS...
PLEASE HELP ME GUYS! I REALLY NEED THAT PHONE :crying::crying::crying::crying::crying:
THANK YOU !!! :good:
Hallo,
If your phone is still recognized in fastboot mode, you can try following up my tutorial here » https://forum.xda-developers.com/mate-8/help/how-to-unbrick-l29-al10-stuck-fastboot-t3599775
I was experiencing the same problem. No OS, no recovery, no fastboot flash possibility, only fastboot booting. Keep in mind that you will need 15€ for this method to work but it is the only way to resurrect your device.
PM me if you need further assistance.
djmitza222 said:
Hallo,
If your phone is still recognized in fastboot mode, you can try following up my tutorial here » https://forum.xda-developers.com/mate-8/help/how-to-unbrick-l29-al10-stuck-fastboot-t3599775
I was experiencing the same problem. No OS, no recovery, no fastboot flash possibility, only fastboot booting. Keep in mind that you will need 15€ for this method to work but it is the only way to resurrect your device.
PM me if you need further assistance.
Click to expand...
Click to collapse
Thank you for the reply my friend.
The problem is, that it only boots in to fastbootmode, but any pc wont recognize it. I tried even with Mac...:crying:
Greetings
DC-Phoenix should recognize the fastboot brick state even if the device doesn't show up in Minimal ADB & Fastboot. Try my method and let me know if it works.
Hi guy's.
DC Phoenix save my mate 8 with factory firmware.
I was the same problem like you and search one week a solution and after I decided to pay and try Phoenix and now I write from my mate 8
Before buy 15€ of credit you can download and try to connect your phone on DC Phoenix
does the DC phoenix method take your phone to absolute stock? ie, stock firmware +recovery + Locked + no root?
Yes. You will have the factory firmware (stock) but with unlocked bootloader.
I was using Twrp, was trying to install RR https://forum.xda-developers.com/honor-8/development/rom-t3606257 Somehow since iam a noob I most have done something terrible wrong, formated the phone in the wrong step or whatever, can't get in to Twrp again.
Huawei eRecovery says "Getting package info failed" after it tries to connect for a while over wifi. I know my files remain on the SD card in "dload", but I cant really reach them with the phone
I can get in to Fastboot&Rescue mode but from there I dont know what to do to advance. Phone unlocked & FRP unlocked. Android reboot reason: AP_S_ABNORMAL (well f me?) Cant connect thru HiSuite, at least I dont know how
I have re-download this file http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1774/g1755/v101649/f1/full/update.zip but I cant really use it
Any idea is highly welcome, thank you
Edit: I solved how to get in to twrp again and could reinstall original.. thank god
U need to use another phone or pc to put update.app tp dload.
Hi guys, my friends phone suddenly got bricked with error: Your Device has failed verification and may not work properly
Phone was never rooted, never unlocked bootloader, usb debugging was not enabled.
I am only able to boot to recovery. If i try recovery i always get "Get package info fail".
I did not try factory reset as the data in the phone is really important to him.
Phone is visible to fastboot, but not to ADB. Its also not visible to HiSuite.
I have been trying for 2 days but this seems to me like impossible situation, to recover the data.
anyone has any solution?
@kmet11 you can use HiSuite Proxy and Recovery OS https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)