I rooted my note 5 some time ago and recently a Magisk update made the phone stick on the "Samsung" logo. "soft brick" I could not remember the keys to get to recovery, and all my googling yielded nothing, until I finally was able to use a couple different articles to put it together. (Mods, if there is a better article, please do whatever to get it more prevalent in Google. Or this one )
FROM THE SAMSUNG LOGO SCREEN.
PRESS THE DOWN VOLUME AND POWER AT THE SAME TIME AND HOLD (5-12 SECONDS)
WHEN THE SAMSUNG GOES AWAY AND/OR VIBRATES.....
QUICKLY SWITCH TO THE POWER, VOLUME UP, HOME BUTTON
THIS WILL BOOT TO RECOVERY
Obviously this make take a little practice, or try and rehearse it in your mind. It was easy, if your ready.
p.s. I cant tell you how many google results said "turn phone off." As part of the instructions. That just ticked me off. THAT IS WHAT I AM TRYING TO FIGURE OUT!!!! DUH
Related
I decided to install VooDoo lagfix on my new captivate when it still didn't have anything on it to minimize potential loss of information. I downloaded the lagfix, got it started, then the damn battery popped out when I got off my bed a few min into the mod. Immediately I felt like an idiot. Now, when I start my phone I get this sequence: ATT world phone screen, then a GALAXY S / GT-I9000 / SAMSUNG screen which it freezes on.
I have odin3 v1.7, but I'm unable to get it to Download Mode with any of the methods I've found (I don't know what I need for adb or what it is though...).
If I attempt to go go into download mode with Vol + & Power it shows a circle of radial lines, then it goes to a battery with the circle of radial lines (and I'm still holding both Vol + & power), then a black screen, then repeats what seems an indefinite amount of times. If I release the Power or Vol buttons it stays black for a couple seconds then it goes to the charging battery screen.
If I plug it in and turn it on with odin3 running, the phone stays on the frozen GALAXY S screen, odin3 recognizes it as COM6 but wont allow Start.
Any help would be great. My intuition says it has to be fixable if it's software.
Not sure if this will help, but earlier today I installed a theme on my phone that wasn't supported by my kernel by accident. The phone went to the AT&T World Phone screen then hit the Samsung Galaxy S screen and froze. I pulled the battery out to unfreeze the phone and then I put it back in after a few seconds and turned the phone on. I immediatly did the three button method and held it down so the phone did the AT&T World Phone/Samsung Galaxy S thing. I kept my fingers on them and the phone rebooted again (which is supposed to happen) and I kept the three buttons held down so again, it rebooted. After the second reboot I immediately took my fingers off the buttons when the AT&T World Phone screen popped up and I got into recovery. Now, this is a theme so it's totally different, but it's worth a shot and hopefully it works for you.
But if that doesn't work I still wouldn't worry as you most likely didn't brick your phone. If it was bricked it wouldn't be turning on at all and Odin is reading it at least so I'm sure with the right help if my method doesn't work, you can fix it.
Hopes this helps you man!
No power, just volume up and down plus in usb
Get a Jig. I was in the same boat. Worked like a charm.. You can make one (I did)
http://forum.xda-developers.com/showthread.php?t=841512
or you can buy a jig. Will surely work. Good luck
Alright so here's the issue. I was about to flash the latest CM using ClockworkMod, before it restarted it asked for superuser permissions which I had already granted before which seemed odd to me. I set down my phone after this to let it do its thing after this and when I picked it back up it was off and wouldn't come back to life. It's bricked.
When I try to power it on, it shows the Samsung logo and then goes black and then nothing. If I hold down the vol+, power and home to get to recovery it will show the Samsung Galaxy S3 logo then goes black, then shows the samsung logo again, then goes black and stays there. If I do vol-, power and home, it asks to press vol+ or vol-, so I press vol+ to get to Odin. It shows the Odin screen for about 5 seconds and then it goes black and stays black.
So basically, I can't boot, get to recovery, or get to odin long enough to actually use it. Any help is appreciated, thanks.
Sounds like it is time for a replacement. I had a Thunderbolt that did the same thing and couldn't fix it because the phone will not stay on long enough to do anything.
[Q]Can't get into Recovery Mode,possibly due 2 "sticky" power button.It got worse
Couple of things first to lay down the situation.
I'm on BEAN Builds 19,
http://forum.xda-developers.com/showthread.php?t=1973982
I'm also using ClockworkMod Recovery. Not sure what version.
Now my power button is one of those "sticky" ones, where it's not springy. This has caused me a few problems in which I can't seem to use the button to turn on my phone anymore. If the phone is off, I have to pull the battery, and then re=insert it to turn the phone back on. Also I'm not sure if button is "being held down", since it's so sticky, but the quick toggle options in the ROM for Restart and Recovery don't work. When I use the quick toggle for restart, my phone just turns off, and doesn't restart. As for recovery, I'll touch on that below.
Today I wanted to flash myself a new modem. So I tried to get into Recovery mode. I go into there once after a couple of tries, but the Power Button , being in the down position from the "sticky button", hit the option to restart the phone before I could flash anything/do anything. After a couple of tries of unsuccessfully getting into Recovery Mode the normal holding down buttons way, I decided to try the quick toggle in the rom to get into Recovery mode.
But just like hitting the restart option, it didn't do what I wanted it to do. My phone shut off, but that was it. Now when I try to battery pull and reinsert to get the phone to turn back on, all it does is show the Samsung Logo, turn black, and that's it. I'm assuming that it's trying to boot into Recovery Mode since that's what it was last told to do before I shut off my phone, and I also think that the "sticky power button" is throwing off the phone's attempts to do that.
Any help or direction would be great and much appreciated. Thank you for your time you took to read this.
Bang ur fone on a table. Seriously ppl been doing that on ur situation to pop out the power button. Try to cover ur fone or put a cloth on table so ur fone wont get scratch and stuff
Sent from my d2lte using Tapatalk
VigilanteM2 said:
Couple of things first to lay down the situation.
I'm on BEAN Builds 19,
http://forum.xda-developers.com/showthread.php?t=1973982
I'm also using ClockworkMod Recovery. Not sure what version.
Now my power button is one of those "sticky" ones, where it's not springy. This has caused me a few problems in which I can't seem to use the button to turn on my phone anymore. If the phone is off, I have to pull the battery, and then re=insert it to turn the phone back on. Also I'm not sure if button is "being held down", since it's so sticky, but the quick toggle options in the ROM for Restart and Recovery don't work. When I use the quick toggle for restart, my phone just turns off, and doesn't restart. As for recovery, I'll touch on that below.
Today I wanted to flash myself a new modem. So I tried to get into Recovery mode. I go into there once after a couple of tries, but the Power Button , being in the down position from the "sticky button", hit the option to restart the phone before I could flash anything/do anything. After a couple of tries of unsuccessfully getting into Recovery Mode the normal holding down buttons way, I decided to try the quick toggle in the rom to get into Recovery mode.
But just like hitting the restart option, it didn't do what I wanted it to do. My phone shut off, but that was it. Now when I try to battery pull and reinsert to get the phone to turn back on, all it does is show the Samsung Logo, turn black, and that's it. I'm assuming that it's trying to boot into Recovery Mode since that's what it was last told to do before I shut off my phone, and I also think that the "sticky power button" is throwing off the phone's attempts to do that.
Any help or direction would be great and much appreciated. Thank you for your time you took to read this.
Click to expand...
Click to collapse
I've got a very similar issue. Only difference is my power button is not stuck at all. However regardless of how I try to enter recovery/Download/ or simply to restart my phone I often times have to try 10 - 15 times before anything other than the Samsung splash screen into black screen of ??? Happens. Up until 5 minutes ago and hopefully for good something somehow decides to let the phone do as I had asked(told) it to do. Wish I had an answer or some help for you instead of reporting the same problem. Hopefully someone out there does.
Sent from my unknown using XDA Premium 4 mobile app
johnsgone said:
I've got a very similar issue. Only difference is my power button is not stuck at all. However regardless of how I try to enter recovery/Download/ or simply to restart my phone I often times have to try 10 - 15 times before anything other than the Samsung splash screen into black screen of ??? Happens. Up until 5 minutes ago and hopefully for good something somehow decides to let the phone do as I had asked(told) it to do. Wish I had an answer or some help for you instead of reporting the same problem. Hopefully someone out there does.
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you open up your phone and meter the button? If not its probably sticking. The button you see on the outside is just a contact not the actual button so it won't look compressed. Sounds like your problem is super sensitive button which is related to the sticking button in fact it was what happened to me beforeit started sticking.
ThePagel said:
Did you open up your phone and meter the button? If not its probably sticking. The button you see on the outside is just a contact not the actual button so it won't look compressed. Sounds like your problem is super sensitive button which is related to the sticking button in fact it was what happened to me beforeit started sticking.
Click to expand...
Click to collapse
No sir, I've not looked into that. Indeed I will now, and I thank you for your response.
Sent from my unknown using XDA Premium 4 mobile app
Greetings!
I'm sorry if this is a stupid question, but I'm having a hard time with this. I was carrying my galaxy S6 on my pocket, and when I got it out I saw that it was stuck on this screen: https:// i.imgur.com/DnddzrR.png
The phone won't turn off. I've tried to hold the power button for a long time, but nothing happens. The only two combinations that work are vol- & power (which reboots the phone, but that's it) and vol- & power & home, which puts it into download mode.
I can't get into the recovery, no matter how I try. Since the only thing I can do is go into download mode, I've tried downloading the stock firmware in sammobile and flashing it with odin, and while the flashing went well and there wasn't any error, the phone is still stuck in the same screen.
I'm not sure what to do or what happened. Please ask me for any info that might be relevant or help.
Press vol up down and lock button and hold all 3 together wait for turn off then try to boot in recovery if it restarts it self then do it again but then after its turn off just hold vol up
I've tried that a lot of times, but no matter for how long do I press the buttons or with buttons do I press, it's still stuck in that screen. Seriously, the only two things that work are download mode and soft reboot.
Greetings, I'll try to keep it short. My device is a Zenfone 7 Pro (ZS671KS)
I was using the phone normally and then for some reason it got stuck and I had to perform a "holding the power button" force shutdown to get out of it. The same thing has happened a few times before and it always boots back to normal. This time however, happened after I just downloaded and installed the latest firmware update when the phone was in its "waiting for reboot" state.
It has been bricked ever since and holding the power button will just send it into a boot loop (a brief vibration every once in a while). Whatever I do nothing will show, no logo no LED indicator light or anything like that. All black. Holding volume up or down + power also don't do anything. Vibration is the only response I am getting.
The phone itself was not modified in any way, it was never rooted, didn't have a custom firmware and stuff. Is there anything I can try to save it and all the data inside (data being my priority) before I give up and admit defeat?
Don't think I've see anything quite like it before, so any idea is appreciated.