I was trying to flash stock rom on my mate 9 after having it rooted for about a month. I was using HWOTA and I think I messed up because I did not have my unlock code written somewhere and could not continue the final steps to flash the stock rom. And so now, it says phone locked in fastboot and powering up the phone boots into erecovery default, which says getting package info failed. Can't get into twrp anymore as well. Is there any way to make my phone normal again. The phone is an Australian Vodafone mate 9, start with L09, single sim, not sure about the rest of the numbers.
Related
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
Long story short fully wiped system with TWRP, then messed up more and deleted TWP, Erecovery doesn't work, Fastboot&Rescue mode says "Phone Locked" and also "FRP Unlock" In red. ADB recognizes the device but says unauthorized, and i'm just looking to restore this to the STOCK image.
Someone help please?
Found Phone : MHA-L29
mHA-L29C636B180 ( I believe this is the firmware, I may be wrong since I flashed a few different custom ROMs)
You need to unlock bootloader again.
It should say Phone Unlocked.
After that, follow this to update/reinstall firmware: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I was trying to flash an oeminfo file from a C432 on to my bln-l24 after flashing Elite 5.1. I mistakenly thought I could rename oeminfo to oeminfo.img and flash with twrp. Well, I did that, and now I have a brick. At first, all I could get to was erecovery, which would fail when I let it do its thing. I've tried to flash B360 back on it using the 3 finger method with no luck. I flashed to MM rollback package, which was successful but still would only boot to erecovery. I flashed the full MM package, which again was successful. However, not it just hangs on the blue honor screen after the boot animation. I can't do anything in fastboot without getting a Command Not Allowed message since I am FRP locked. Any ideas? Hopefully I'm not SOL....Thanks.
Flash boot.img
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Ronedion said:
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Click to expand...
Click to collapse
I can't. Everytime I try to flash something in fastboot, it says command not allowed
Download Huawei Multi Tools by Team MT
Download the above and use it to unbrick your phone ?
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
RealParity said:
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
Click to expand...
Click to collapse
Tried it, I get Command Not Allowed error message. I think the problem is I'm FRP locked as well, which interferes with a lot of fastboot commands. Thanks for the assistance though.
as you have flashed the OEMINFO of C432, you need to flash the update.app files for BLN-L21C432, available here
https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
by any chance you are able to access TWRP now?
if the 1st method doesnt work then refer this https://forum.xda-developers.com/honor-6x/how-to/guide-unbrick-bln-l24-rollback-to-b310-t3695154
if not, then on DC Phoenix is your option. you can more info in multi tool thread under Honor 7 section.
Ok so, this isn't my first time flashing and returning to stock with phones, just the worst. Any help is appreciated.
I unlocked the bootloader, installed TWRP and tried to flash a few ROMS which were not working great so I went to go back to stock and then the **** show happened. Its the LO4 Model. I flashed stock recovery, Relocked the bootloader and tried the Force Flash Update method. Well now the phone is stuck in a boot loop(Cant power it down), cant boot to erecovery/ recovery -- I can get to fast boot mode but the FRP is locked so I can not do anything all commands fail with an error.
Any thoughts? I just need to get it back to stock OR a working ROM- I plan on selling this phone and My wife (it was her phone) has upgraded to a Galaxy S9. If I cant get it to work, I will post it on swappa as is for a cheap price
Thanks!
Same Issue
I did the same thing, however when in fastboot type fastboot oem unlock (put the code here) and this will unlock your bootloader. I did this I even managed to flash the stock system cust recovery and boot, but it doesnt boot into recovory, erecover, or even download mode to download the software from the sd card. Any ideas?
I tried that fastboot code and I get an error because of the FRP lock
I upgraded to the Note 20 ultra and I want to relock my OnePlus 8 5G bootloader for resale. I did unlock the sim as it was originally for TMobile. But when I recently relocked the bootloader it basically was soft bricked, and wouldn't boot past some weird error message about something corrupt. When I unlocked the bootloader again that message went away and it booted fine. One issue is that it won't take an ota it keeps failing to even download. I've tried many times. Not sure what's up with it, but if there is a way to relock the bootloader and have it boot and update the ota I'd be much appreciative.
Sent from my SM-N986U using Tapatalk
follow these steps:
1. backup your persist.img file
2. use unbrick tool to recover the phone to an orignal version
3. upgrade to the newest version through OTA
4a. if the fingerprint works, it works all done.
4b. if the fingerprint sensor is abnormal, unlock your phone and flash persist.img, then relock your phone. There will be a series of wiping data during your lock/unlock operation.