Hi everebody!
Could someone help me with this issue? I tryed everything I could but can't find the way to get my phone connected to my Windows 10 desktop. Tryed every tutorial with no luck.
Any help would be appreciated.
Disable driver signature and reinstall Xperia drivers.
go to Settings > update & security > Recovery > Advanced startup > restart > Troubleshoot >Advanced Options > Startup Settings > restart > press F7 or "7"
Related
Hello!
Help restore phone worked just fine before lunch Today, then switches off by itself and all. when running vibrates but does not run
.Thought battery-it whole. Display-a.
decided to restore the firmware without a battery when connecting USB Device driver Omap4430 prevailed. no more drivers do not see anywhere else!
using LG flash tool tried to recover-it does not see the phone.
using UpTest also doesn't see the phone.
Window 8 x 64
Who has encountered this problem, and I do not understand what port you need to replace
?
P.S. Head boils. sorry for my broken English
From sda171 about Windows 8:
I just wanted to add something for fellow Windows 8 users following your guide. By default, windows 8 does not allow driver which are not signed to be installed. You wont even be prompted to force install it. It will deny the installation without your knowledge (this happened to me and I had no clue). In addition to installing every app as administrator. You have to disable driver signature verification on your windows 8 computer.
To do that.
Go to PC settings > General > Under Advanced startup , click restart now > at the boot up screen click 'troubleshoot' > advanced options > startup settings > restart > then press the corresponding number to temporarily disable driver verification (it was 7 for me).
Then do all the driver installing as stated in the awesome guide. If you restart after the disabling the verification is enabled again. It works for only one boot and has to be done again if required (in case you restart after disabling). The verification has to be disabled for successful installations of the drivers u install or else it wont work for you on windows 8.
In this tutorial I will tell you how to install unsigned drivers in windows 8
follow these steps to install drivers:
1. In windows 8 go to control panel and choose General –> Under that go for
“Advanced Startup” –> Restart now.
Now the system will restart and might take few minutes
to show up the boot menu so just be patient
After some time you will be prompted with a menu with these options:
1. Continue
2. Troubleshoot
3. Turn off
Just Choose Troubleshoot
Then the following menu will appear:
Refresh your PC
Reset your PC
Advanced Options
You have to choose Advanced Options
Then the following menu will appear
System Restore
System Image Recovery
Automatic Repair
Command Prompt
Windows Startup settings
Choose Windows Startup Settings, then Click on Restart..
Now the computer will restart and the boot menu will appear:
[This is important]
Just Choose “Disable Driver signature Enforcement” from the
menu.
Now you are done..
Now windows will start and you can do the installation of
the driver that is not signed..
HIT THANKS IF THIS TUTORIAL HELPED YOU :silly:
Hi!
I want to share with you the sum of all that I have learned and created with this ROM.
What 's so special about this ROM ?
She's all ready with root, busybox , custom theme , bluetooh tethering (is missing in default ROM) and deodexed. :good:
How to install???
>
>>>>>>>>>>>> ALLWAYS HAVE A BACKUP AND A BACKUP FROM YOUR DEFAULT ROM!!!<<<<<<<<<<<<<<<<<<
>
>
It does not work in L22 and L33 , although it is the same phone, but the provider configuration is totally different, frequencies , network codes, etc.
If someone able to change or create , it may be possible to upgrade .
L11 - Europe
L22 - Venezuela
L33 - Colombia
Sorry :\
>
>
This is made for vodafone pt, if you flash and you are not vodafone pt, same app gona miss and themes dont work, but you cand change to yours to fix it. :laugh:
How???
With root, go to /data/custom.bin, see what says in there. write in paper if you need it.
In the end of flash, install root browser, go to /cust folder, and rename vodafone with the first name you find in custom.bin, enter in folder and rename pt with the second name you find custom.bin. do factory reset. Use small fonts!
>
>
>
----I am not responsible for any damage to your device. Everything here indicates was tested on my phone finding the same in perfect condition.---
>
>
To Flash:
Need:
Bootloader unlocked, if you dont have it, Send the following e -mail to:
[email protected] and [email protected]
>
Hi! My name is ( your name ), and I hereby request the bootloader code for my smartphone HUAWEI ASCEND G6 -((write your version)) if possible .
Product SN : (It is on the back of the equipment )
IMEI : (on key pad *#06# )
Product ID : ( on key pad *#*#1357946#*#* )
Thank you for your attention
( Your name).
>
>
With bootloader unlocked Fastboot mode must says UNLOCKED in the end of page
>
ABD Terminal --> https://meocloud.pt/link/986dfd7e-1d97-4458-9806-a576ceb90084/adb terminal/
>
TWRP. recovery - is in the ADB folder already (and before flash it you can do a backup first with it)
>
copy DEODEX_B370_V3.zip to external SD card.
>
> Turn OFF the phone
>
>press vol - and power (fastboot mode)
>
>open ADB in cmd ( the cmd inside ADB is from windows 7 64bit, if you use other version, go to c:\windows\system32 copy and replace in ADB folder)
>
>write in ADB:
fastboot flash recovery TWRP.img
>
> when finish the flash, press vol + and power to go to TWRP recovery.
>
> go to install and choose DEODEX_B370_V3.zip
>
>install ( you can read the steps in flash, look at it)
>
>the phone automatically restarts
>
> Phone boot loop, press VOL + and dont release to go to recovery
>
>do factory reset and do reboot system
>
>set defenitions in the phone (wifi, google,etc)
>
>reboot
>
>DONE
>
-------->ROM:
https://meocloud.pt/link/b91f89f5-60ec-4fb4-b739-ec78dbc641e1/DEODEX_B370_V3.zip/
>
--------->root browser:
https://meocloud.pt/link/4b8303d5-1...r-com.jrummy.root.browserfree-223-v2.2.3.apk/
you wrote "custom theme" does it mean this rom supports cyanogenmod themes?
CUSTOM
dravida said:
you wrote "custom theme" does it mean this rom supports cyanogenmod themes?
Click to expand...
Click to collapse
Hi! I write custom because is changend by me., i edit the theme that is show in pictures.
If you go to build.prop and change this line:
ro.config.hwthemes=2 to 0
and reboot
I think my be it work, i dont have try it.
.
So this is my second post on XDA.
LG L50 Sporty is also known as LG L50 D213N.
It is not so high level device and so maybe is not of wide interest. But ...
After searching a whole internet I was root it. So other don't have to go through.
Maybe this post will look as long procedure (first view) but actually is not.
There are a couple preliminary steps but just three steps to root.
________________________________________ [I am not native with English language, sorry about that.]
_____________________ Guide: How to root LG L50 Sporty
PRELIMINARY: steps before rooting your mobile
P1: If you have important data on your mobile phone back them up before starting.
The process itself will not erase your data but it is better to have insurance before modifying the system.
P2: Enable USB debugging option on device:
_____Settings > Developer options * > USB debugging >> turn on.
__________* Developer options screen is hidden by default. If this tab does not appear enable it:
____________Settings > About phone > Software information >> tap Build number 5-10 times.
P3: Enable Unknown sources option:
_____Settings > Security > Unknown sources >> turn on.
P4: Enable Stay awake option:
_____Settings > Developer options > Stay awake >> turn on.
P5: The device should have 90% or more of full battery.
P6: All the specific drivers needed to install in the computer should be done before rooting *.
_________* > go to the LG Electronics official site
__________ > type the name and model of your device in the search box,
__________> select your device and click the PRODUCT SUPPORT,
__________> in the support page, click the SOFTWARE UPDATE tab,
__________> download the drivers and install onto to your computer.
P7: Download and install *: 15 seconds ADB Installer - Version 1.3.
__________* 15 seconds ADB Installer you can find here on the forum: http://forum.xda-developers.com/showthread.php?t=2588979;
____________follow Install process instruction given by the author.
P8: Download the PurpleDrake *, extract it and place at the comfortable space on your computer where remember.
__________* PurpleDrake you can find here: http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-Lite_R03.tar.gz
___________ You need 7-Zip (or similar) to extract tar.gz file ( ... it will be two successive extractions).
P9: Download SuperSu from the Google Play on your device.
SECOND SECTION: steps to rooting device
R1: Set mobile phone device as next:
_____Settings > PC connection > Select USB connection method
_______>> turn on Media sync (MTP).
R2: Connect device to the PC . ..... (You can close AutoPlay windows what will open).
R3: Go to extracted PurpleDrake. .and run 'purpledrake_windows' file. On the black window, what will be opened, in last row will appear ·Press [enter] to continue...· so press a ENTER to start the process.
___
The warning will appear on mobile phone device, accept it and continue the program should appear by itself.
Then program will shows the model number of your LG L50 and there press ENTER to continue with the process.
___
______________< if no progress after ·Waiting for device...· reconect device and try again>
___
The phone will reboot. It is normal.
Press ENTER again to continue, wait for short and finally press ENTER again and the process is done.
_________________________________________________________________________________________
__________________________________________________________That all! Please be patient through the entire process!!
9006..Ritmo said:
.
So this is my second post on XDA.
LG L50 Sporty is also known as LG L50 D213N.
It is not so high level device and so maybe is not of wide interest. But ...
After searching a whole internet I was root it. So other don't have to go through.
Maybe this post will look as long procedure (first view) but actually is not.
There are a couple preliminary steps but just three steps to root.
________________________________________ [I am not native with English language, sorry about that.]
_____________________ Guide: How to root LG L50 Sporty
PRELIMINARY: steps before rooting your mobile
P1: If you have important data on your mobile phone back them up before starting.
The process itself will not erase your data but it is better to have insurance before modifying the system.
P2: Enable USB debugging option on device:
_____Settings > Developer options * > USB debugging >> turn on.
__________* Developer options screen is hidden by default. If this tab does not appear enable it:
____________Settings > About phone > Software information >> tap Build number 5-10 times.
P3: Enable Unknown sources option:
_____Settings > Security > Unknown sources >> turn on.
P4: Enable Stay awake option:
_____Settings > Developer options > Stay awake >> turn on.
P5: The device should have 90% or more of full battery.
P6: All the specific drivers needed to install in the computer should be done before rooting *.
_________* > go to the LG Electronics official site
__________ > type the name and model of your device in the search box,
__________> select your device and click the PRODUCT SUPPORT,
__________> in the support page, click the SOFTWARE UPDATE tab,
__________> download the drivers and install onto to your computer.
P7: Download and install *: 15 seconds ADB Installer - Version 1.3.
__________* 15 seconds ADB Installer you can find here on the forum: http://forum.xda-developers.com/showthread.php?t=2588979;
____________follow Install process instruction given by the author.
P8: Download the PurpleDrake *, extract it and place at the comfortable space on your computer where remember.
__________* PurpleDrake you can find here: http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-Lite_R03.tar.gz
___________ You need 7-Zip (or similar) to extract tar.gz file ( ... it will be two successive extractions).
P9: Download SuperSu from the Google Play on your device.
SECOND SECTION: steps to rooting device
R1: Set mobile phone device as next:
_____Settings > PC connection > Select USB connection method
_______>> turn on Media sync (MTP).
R2: Connect device to the PC . ..... (You can close AutoPlay windows what will open).
R3: Go to extracted PurpleDrake. .and run 'purpledrake_windows' file. On the black window, what will be opened, in last row will appear ·Press [enter] to continue...· so press a ENTER to start the process.
___
The warning will appear on mobile phone device, accept it and continue the program should appear by itself.
Then program will shows the model number of your LG L50 and there press ENTER to continue with the process.
___
______________< if no progress after ·Waiting for device...· reconect device and try again>
___
The phone will reboot. It is normal.
Press ENTER again to continue, wait for short and finally press ENTER again and the process is done.
_________________________________________________________________________________________
__________________________________________________________That all! Please be patient through the entire process!!
Click to expand...
Click to collapse
hi thank you for this great toturial but my question is will this unlock bootloader for this device.i made cwm recovery and cm12.1 but is the bootloader unlocked with this i dont want to risk too much and hardbrick my phone...
nice thanx
Nice and easy tutorial... Rooted fast and easy
Question: How to unroot the l50 sporty after changes with purple drake ?
Silly me i see i can full unrooted with super su
Also what is the best rom for this device did you put also twarp on it after rooted any tutorial on it.
I have idea to put Android 7.1 ROM | 391.19MB | from link new user cant post link anyone done it ?
I have idea to put new OS Lineage on it to make it usefully again any advice ?
Regards from Cro
Root Checker says: Not Rooted
Hi.
First of all thanks for submiting this post.
I've followed all the steps to root my phone, everything goes as it should be, but when it reboots and I open Root Checker to see if it worked it says my phone is not rooted. I've reseted my phone, rebooted my pc and nothing seems to help. :crying:
Any idea to solve this problem? i would apreciate it.
---------- Post added at 04:32 AM ---------- Previous post was at 04:23 AM ----------
zaam94 said:
Hi.
First of all thanks for submiting this post.
I've followed all the steps to root my phone, everything goes as it should be, but when it reboots and I open Root Checker to see if it worked it says my phone is not rooted. I've reseted my phone, rebooted my pc and nothing seems to help. :crying:
Any idea to solve this problem? i would apreciate it.
Click to expand...
Click to collapse
Here are the Check Details from root checker:
Root Access No Access
SU Su found
UID/GDI uid=10086(u0_a86)
gid=10086(u0_a86)
groups=3003(inet),50086(all_a86)
context=u:r:untrusted_apps:s0
Unix Utils toolbox
Env. Paths /sbin:/vendor/bin:/
system/sbin:/
system/bin:/system/
xbin
SU info
Path /system/xbin/
/system/bin/
Versions 3.61:kinguser_su
Permissions rwxr-xr-x
Owner root:167696
SELinux Enforcing
How To Root Asus Zenfone Max M1 ZB555KL X00PD
First download the material
> UBL & MAGISK: Download Here
> Required Firmware : Download Here
Step by Step
> Install the firmware first
> Recovery mode (turn off your smarthphone, then press volume down + power)
> update via adb
> Connect the handphone to the PC / laptop
> press shift + right click select open command windows here then type "ADB SIDELOAD NAMAFIRMWARE.ZIP" without quotes
> ENTER
> Wait until the process is complete
> Reboot the System
how to unlock bootloader
> Extract all ingredients that have been downloaded
> Copy the file called "UnlockTool_ASUS_Android_signed_E300_1.apk" to your Smarthphone
> Then install "UnlockTool_ASUS_Android_signed_E300_1.apk"
> Here you backup first because it will format the data on your smartphone
> Open the unlock apk, then follow the instructions until Smarthphone restarts by itself
INSTALL MAGISK
> Enable unlocking OEM & USB debugging
> open settings -> about cellphone -> information software -> build number and click 7X -> back -> OPTION DEVELOPERS
> double-click install.bat
> And wait for your smarthphone to reboot automatically
> DONE
Your Asus Zenfone Max M1 already Unlock Bootloader and installed Magisk
reserved
Is this legit? Thanks.
is the downgrading part necessary?