After 8.1 update can pause but cannot unpause audio via LG Tone bluetooth headset - Google Pixel 2 Questions & Answers

Both my wife and I have the Pixel 2 (non-XL) and both have LG Tone bluetooth headsets. I have the 810 model and she has the 820.
After receiving the 8.1 update, both of us can pause whatever audio is playing over the headsets using the headsets play/pause controls but both cannot unpause the audio from the headset.
This is pretty frustrating for both of us as we both tend to listen to a lot of audio books and it is a very common thing to do throughout a day to pause the audio then unpause.
What's interesting though is in my car (Honda Accord) I can pause and unpause without issue from the controls and in my wife's vehicle (Nissan Rouge) it works as well.
This would point to something specific with the LG's or they type of headsets or perhaps using a combo play/pause is the issue? In my car I have a separate button to play and to pause. In my wife's Rouge, it's on-screen touch controls, not a physical button.
Has anyone else run into this issue after receiving 8.1? Has anyone found any solutions to make it work again?
I have fully removed the headset and re-added it. I did a factory reset on my headset. Rebooted the phones a number of times. It will never unpause only but will pause the audio without issue.
Edit: I tried doing a "Reset Wi-Fi, mobile & Bluetooth" just to see if that helped and it did not reset any of my Bluetooth settings! I rebooted and tried again and it resets my Wi-Fi saved networks but my Bluetooth devices that have been or are paired persist. Has anyone else run into this?
I made a post over at Reddit about this as well.
https://www.reddit.com/r/GooglePixe...t_network_settings_pixel_2_nonxl_81_does_not/
Edit: I did a full factory image reinstall from the downloaded image via fastboot/adb and still have the same result.
I seem to be getting further by trying different combinations in the developer menu for the bluetooth settings. Now if the last used audio app is closed and I push play on the headset it will reopen that app. Prior to 8.1 it would do that and also start playing the audio from the last used app. It's a step in the right direction. I did find a workaround for my most used audio app which is Smart Audiobook Player under the troubleshooting settings to force pause/unpause which seems to work for just that app at least. I still cannot unpause music from the Play Music app or the Audible app though.

Related

Playing music thru wired headset, incoming call forces play thru built-in speaker??

this is a major annoyance... I've had a Samsung i760 for a couple months now and have found it seems to have a serious design flaw.
I like to listen to music at work, through my phone using a wired headset (two way headset with mic). I work in a quiet office environment. I always set my ring to silent/vibrate while at work. If I'm listening to music, and happen to receive a call, the music will stop playing through the headset and will start playing through the built in speaker of the phone for all my coworkers and supervisor to hear.
The music would continue to play like this even after answering the call... I have to bring up the player and stop it manually. I was able to partially alleviate this by disabling the 'play in background' setting. With that, the music will still play through the external speaker briefly, roughly 3 seconds, before the player pauses the song. Which is still unacceptable.
I have tried TCPMP and Windows Media and had the same result.
Also, if I have the phone set to ring audibly, the ring is forced through the speaker as well, and the music I was listening to AND the ringtone will play at the same time for those 3 or so seconds.
what I'm hoping someone can help me with is a) a way to make ringtones play through the wired headset if possible, or b) at least keep the sound from being forced through the external speaker when the wired headset is connected and I recieve a call. As it stands, I either can't listen to music at work (a big part of why I bought the phone), or I have to turn the phone receiver off and risk missing calls. Either option sucks and is making consider another phone... though I don't know if this is a WM6 issue or an issue with this specfic phone.
any help would be greatly appreciated!
*bump* anyone?
any way thru the registry to disable the built in speaker alltogether while leaving the headphones operational?
On Acer s200, you can change the value of registry key HKLM\Software\Acer\Scenario\HeadsetIn to 1...
Maybe that can help...

Bluetooth Issue

I used to have a Galaxy SII that was able to connect to my car stereo through bluetooth with no issue.
With the Tmobile One S, often time my phone does not full connect it will do things like only connect for phone use but not for listening to music. I also used to be able to control moving the songs and I can no longer do that. I also cannot get the metadata to show up on the car display.
Many times a reboot will hook the audio up and I can listen to music, but I still can only go forwards and backwards by using the phone.
Is anyone else having issues like this?
Yep, I got the same issues....A2DP sync problem.
Does it sync your phone contacts too. If so change what contacts are synced only allow google contacts. This was a solution for a similar issue in another thread.
Sent back in time to find Marty.
No, I don't sync my contacts...worked perfectly with MyTouch4G...also noticed headset droid and jays headset control take away Bluetooth control capability...anyone know a work around besides disabling?
Same issue here with my bluetooth headset (Cardo scala rider G4) and HTC One X.
Since installing Jays headset control for my Jays One+ (which is a one-button wired headset) my bluetooth headset control fails big time. I can only use my headset play functionality and after disconnecting the headset the music player starts playing music again within a couple of minutes.
I'll try to disable Jays headset control and let you know if this resolves my bluetooth problems.
how do/when do you select which contacts to send to headset? Didn't see an option for this in Bluetooth settings.
I received the Tmobile update today and I still have the issue of the phone not transmitting the metadata to my radio. Interestingly enough when I stream Pandora the data from pandora shows on my radio display.
Do any of you all know of a ROM that will allow the metadata to be sent from my phone to the radio?
This is the only thing that really annoys me about this phone. Thinking of selling it when the SIII comes out.

[Q] Bluetooth audio streaming problem

I've been having an issue with the media audio streaming to Bluetooth on the Blaze, which I did not have on my previous phone (Optimus). I pair with a Soundfly View in my car, and use the app BeyondPod to listed to podcasts. On a "fresh" Blaze, the audio will begin to play/stream for a split second, and then stop (though the podcast will continue to "play" or advance on the phone). I can occasionally get it to do it again by clicking play, but never for more than that split second.
Through experimenting, I noticed that phone audio seems to be fine, as well as audio on the Music player. What I've found, consistently, when this happens, if I start the Music player, start playing some audio then pause it, then go back to BeyondPod, it streams fine. At least for a time, though I've yet to figure out exactly what "resets" this workaround. But when I'm unable to play, I have to redo this Music player trick to play the podcasts.
Any clue what is going on here, and any permanent fix?
Bluetooth streaming... I have been doing this for a few years using a slightly different method that I'll share here in hopes it might help. I know this is kinda unrelated to your app, but this might be a fix.
Connect any bluetooth headset (I use my PS3 headset)
Download an app called BTmono (its free and a very simple interface, on/off)
Press the on button
Now any sound you would of heard out of your phone speaker you hear on your headset. This lets you listen to music, audio books, videos, or whatever on your headset. When you are tired of it, make sure to press the off button on BTmono to go back to normal. Hopefully this will help or at least provide a temp fix for now. My boss just thinks I like to wear mine all the time, he has no clue I am jamming dubstep and listening to audio books all night
Well, even should that work, it's really the same solution...using another app to force the streaming which should be happening automatically if you're connected with the right BT profile.
I did forget to mention that I do use A2DP volume, which launches an app (BeyondPod) and adjusts the volume when BT is connected. I also used it on my old phone, so I doubt it's related, but...
Nobody else has any problems with Bluetooth from other apps? It's just me???

All Media Except Pandora Play Through Bluetooth

Running Codename Android
I set up my phone to play through a Bluetooth stereo dock and at first BeyondPod wasn't playing through it but Google Play music was. BeyondPod Started playing through the speakerphone instead. When I realized Play Music was working I opened up Pandora and it also played through the Bluetooth.... until the first song ended and it switched over to the speaker phone. Oddly enough, BeyondPod then started playing through bluetooth. I rebooted the phone and now Pandora is permanently playing through speaker phone only. I downloaded and used BT mono, which caused Pandora to play through Bluetooth with a 15 second delay, but when I shut it off it played through Bluetooth perfectly! I rebooted my phone and it is back to speaker phone only. Now BT mono does not affect it at all.
Summary of what I have tried:
Two separate Bluetooth devices, same behavior
BT mono app, worked at first (crappily) but now has no effect.
Multiple reboots, cleared data and reinstalled Pandora, no effect.
Unchecked and recheck BT setting in Pandora, no effect.
The Bluetooth devices are set to "media" in the bluetooth setting, and one of them was set to "media" and "Phone"
Is this a ROM issue? I love this rom... Any other ideas? I don't think it is a problem with the bluetooth devices considering every other app works fine.
Ok so to add to the mystery, I just tried Double Twist, and it did exactly what pandora did. It played the first song through Bluetooth, and when it cycled to the next track it went to speaker phone. Now I can't get Double Twist back to Bluetooth.
IF anyone is following this, I have found that if I enable BT Mono, the sound stops playing from the speaker, and when I disable BT mono it start playing through Bluetooth.
So just a toggle on and off and it randomly works, sometimes it does nothing though. It's incredibly inconsistent.
Could this be a kernel issue?
Appears to be a general CM10 issue. Sorry.
Not sure what the issue is but I have a Samsung Galaxy Nexus with the same issues. I'm trying to find a fix but nobody knows what is going on. I saw on other forums someone referencing the AVRCP version with new builds. Not sure if this is it or not. But I have a 2011 Toyota Camry it will not pair with for Pandora, YouTube, etc... Google Music works but that's it. And I can replicate your issue. If music is playing, I can hear notifications but if it isn't I don't hear anything.
Not sure if this will work for you but it worked for my HTC One and 2011 Sienna:
Launch pandora
Launch Google Play Music
Under Manage apps, select Google Play Music and stop it.
Sometimes Pandora starts streaming at this point.
If not, select Pandora from Running and stop everything under it.
Restart Pandora and it should stream now.

Bluetooth Controls

I can't control my music player via Bluetooth. No pause/play/fwd/rev. Some issue for both Pairs of headphones and my bluetooth car radio. Audio p,as fine just no way to control it from the connected device.
Is it working for anyone else?
Sent from my SM-T710 using XDA-Developers Legacy app
I'm listening right now to Bose QC35 and ev3rything goes fine. The player is neutron.
Search for options in your player ( settings)
For me, controls only work the first time you connect to the car. On the next drive, audio works, but not AVRCP functionality. Disabling and reenabling Bluetooth fixes it for one cycle.
Don't have that problem but maybe developer options and toggle "Disable absolute volume"? Might not work though because I'm not sure if the setting only covers volume controls or all controls but worth a shot
Do you still have this problem?
I had my S8 repaired and since then I can not control music when connected to BT. With my Sont MDR-1000X I can skip tracks and lower volume but unable to start/stop. In my car none of the controls work. Tried other headsets with the same result. Repaired everything.
Coming from a factory reset because of the repair I am not yet feeling another one. Anyone got tips?

Categories

Resources