hello members i need some help
my device is motorola e2 otus
and its compleatly hard bricked
becouse i recently using some customroms
then i decided to come back to by stock rom
i was successfully restored
to android 5.0.1 then i get a new ota update
to 5.0.2 after the updation my phone wont boot
when i connect to the charger the notification light
is blinking (no recovery,bootloader) it was compleatly hard bricked
then i was found utility to restore it "blank flash"
to flash the bootloader but i get some error
"flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
"
the bootloader does not supported to my motherboard
please any one have solution for this
is there was any blankflash for my device
please help
sorry for my bad english
thanks
Related
Hello! I am Brazilian Moto G 1033 with unlocked bootloader.
Was using the Rom Kitkat UK but decided to return to the Jellybean order to use the two sims.
At the end of the installation it crashed in the fastboot screen, rebooted and nothing, I tried to hard reset and nothing. the loop is giving warning and enters the bootloader unlocked fastboot.
I tried to install the rom again but does not recognize the phone due to lack of clearance.
Can anyone help me
(Sorry for my english)
Hi all,
I've a XT1033. Running Anroid 4.4.4 (Stock)
When upgrading to Android 5.0.2 (OTA) the phone's screen (connected to charger) during the upgrade went black. Wit no error message whatsoever.
Now I'm stuck with a hard-bricked phone. Seeing the QBOOT_USB interface in device manager and getting;
"FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)"
Is there really no fix to resolve this issue? We "must" wait for Motorola to come with the signed bootloader for Android 5.x?
Same Problem with me.
and in the service center they are saying to change the motherboard which costs a lot.
and my phone is out of warranty.
plz help me out.
Same here... Maybe check this?
copezzz said:
Hi all,
I've a XT1033. Running Anroid 4.4.4 (Stock)
When upgrading to Android 5.0.2 (OTA) the phone's screen (connected to charger) during the upgrade went black. Wit no error message whatsoever.
Now I'm stuck with a hard-bricked phone. Seeing the QBOOT_USB interface in device manager and getting;
"FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)"
Is there really no fix to resolve this issue? We "must" wait for Motorola to come with the signed bootloader for Android 5.x?
Click to expand...
Click to collapse
I am having the same problem, I take a lot to restore my device even if it is with android from scratch and everything clean, does not enter or in fastboot
Me too..
My brother's XT1033 has bricked the same way and the blankflash prints the same error.
Sent from my GT-I9500 using Tapatalk
My moto g xt1033 is hard bricked I flashed 4.4.2 gpe edition I got an update of 4.4.4 I updated and after that it bricked it is not recognized by computer it is just showing in device manager ports "Qualcomm hs-usb-qloader9008" I tried all techniques to try I've it back but I failed I tried all things in XDA also but failed please help me I am not in warraty
(I searched before posting I don't find my solution then only I post)
If you ever had Lollipop on your phone go here http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
If you only had KitKat on your phone go here http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
hello
i have the motorolla xt1060. It has undergone a hard brick after I tried to root it with this method http://forum.xda-developers.com/moto-x/general/moto-x-att-vzw-root-busybox-lpa23-12-xx-t3244627. I inserted qualcomm driver after that i flashed bootloader with python and it says that it flashed successfully but the screen is still blank. Then I go to rsd lite and flash Repair_Boot.xml file but it says that the phone failed to switch to fastboot mode
could you guys help me please or give some kind of advice?
thnks.
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com