Hello! I am Brazilian Moto G 1033 with unlocked bootloader.
Was using the Rom Kitkat UK but decided to return to the Jellybean order to use the two sims.
At the end of the installation it crashed in the fastboot screen, rebooted and nothing, I tried to hard reset and nothing. the loop is giving warning and enters the bootloader unlocked fastboot.
I tried to install the rom again but does not recognize the phone due to lack of clearance.
Can anyone help me
(Sorry for my english)
Related
So, i was trying to upgrade to 5.02 and accidentally flashed a xt1032 firmware (BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml & GPE_5.1_XT1032_LMY47M.M001_CFC.xml) I used the "firmware flasher by Alkalinorap" and i got several "Image is too large"
OK so i can see the problem here, i flashed a wrong firmware version, now i've tried to return to stock but get the same resutls. (
I've tried these stock firmwares getting no results:
XT1045_AMX-PE-SS_4.4.4_KXB21.14-L1.54_cid12_CFC_1FF.xml
RETUS_XT1045_4.4.4_KXB21.14-L1.56_cid9_CFC.xml
XT1034_FALCON-RETUAWS_5.0.2_LXB22.99-36_19_cid9_CFC_1FF.xml
On my cid info it shows 41.1A(sha-8048ae,2015-04-10 14:30:28)
The cell phone was bootloader unlocked before flashing for the first time
It shows: Device is UNLOCKED. Status Code 3
when trying to boot it vibrates and then it stucks on "warning bootloader unlocked" screen
I'm downloading
(Moto G LTE) RETUS_XT1045_4.4.3_KXB21.14-L1.23-4_cid9_CFC.xml.zip
to see if there's any chance
Thanks in advance
hecmarrufo said:
So, i was trying to upgrade to 5.02 and accidentally flashed a xt1032 firmware (BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml & GPE_5.1_XT1032_LMY47M.M001_CFC.xml) I used the "firmware flasher by Alkalinorap" and i got several "Image is too large"
OK so i can see the problem here, i flashed a wrong firmware version, now i've tried to return to stock but get the same resutls. (
I've tried these stock firmwares getting no results:
XT1045_AMX-PE-SS_4.4.4_KXB21.14-L1.54_cid12_CFC_1FF.xml
RETUS_XT1045_4.4.4_KXB21.14-L1.56_cid9_CFC.xml
XT1034_FALCON-RETUAWS_5.0.2_LXB22.99-36_19_cid9_CFC_1FF.xml
On my cid info it shows 41.1A(sha-8048ae,2015-04-10 14:30:28)
The cell phone was bootloader unlocked before flashing for the first time
It shows: Device is UNLOCKED. Status Code 3
when trying to boot it vibrates and then it stucks on "warning bootloader unlocked" screen
I'm downloading
(Moto G LTE) RETUS_XT1045_4.4.3_KXB21.14-L1.23-4_cid9_CFC.xml.zip
to see if there's any chance
Thanks in advance
Click to expand...
Click to collapse
Hi . you have the solution?
hello
i have the motorolla xt1060. It has undergone a hard brick after I tried to root it with this method http://forum.xda-developers.com/moto-x/general/moto-x-att-vzw-root-busybox-lpa23-12-xx-t3244627. I inserted qualcomm driver after that i flashed bootloader with python and it says that it flashed successfully but the screen is still blank. Then I go to rsd lite and flash Repair_Boot.xml file but it says that the phone failed to switch to fastboot mode
could you guys help me please or give some kind of advice?
thnks.
My bike g xt1033 during the installation of a 5.0 rom locked in the rebuilding, did not light the screen, did not load and the led did not respond, thanks to the fable san I managed to take it from Hardbrick, but in the step that is to install the rom, the Processes failed.
PS: My bike g was previously unlocked and after recovering from the hardbrick he returned to the LOCKED mode and does not accept being UNLOCKED again.
Please, any idea what to do?
(Translation by Google translator)
My moto maxx is booting till the stitching animation and just keeps repeating that animation and doesn’t go further.
I tried to reflash the software but keep getting preflash validification error no matter which region I try to flash
Recovery shows that it is on 6.0.1 but I tried to flash all and didn’t work.. please help ?
I cannot unlock bootloader since it is not enabled in developer settings and I’m not able to boot into android to enable ?*
My moto maxx was purchased in india! xt1225
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com