dear all
i have installed firmware nxt-l29c185b580 , i decided to hard reset my phone and after hard reset finish i was asked for FPR , i actually know the email and password but i have no way to input them due to no keyboard only google voice
i spent nights trying to input but i could not by pass that through google voice only.
is there any way to install the keyboard from fastboot with computer connect and why did it disappear after hard reset ?
is there any way to remove this connected email from my device remotely from my computer or any web page ( i have access to this email from my chrome "
fast boot show " relocked bootloader " and " FRP locked
what can i do to get my phone back please help , what is the possible solution now
thank you guys , my issue has been resolved by roll back update and full firmware of marshlome and my keyboard came back and i resolved my issue
thank you
Hii, I am facing a problem in my huawei mate 8. After a hard reset the keypad disappeared from the mobile & I am not able to setup the mobile. Could anyone help with any suggestions......
My mobile is totally noy operational,while doing the factory reset,keypad not appearing for the password input.How to get the keypad back.....?
a year ago I had the same problem and I think it was solved by installing the rom again or using another rom.
No need to reflash or go back
Guys is simple .You cannot insert the credentials to your router and so on because the keyboard is missing ?First grab another phone and start a hotspot without any password.connect with mate on that hotspot,then spell pressing the circle clear and loud Fdroid.Install ,then on the search in fdroid say liud and clear keyboard .install the first keybord aviable on fdroid .have fun and remamber ,no need to flash enyhing .think twice!
Related
To start off I have a Huawei Ascend y300 and rooted my phone following this post: http://forum.xda-developers.com/showthread.php?t=2290610
I followed every step and it worked perferctly but I couldn't acces the google play store. After some searching on the forum I got recommended to reset to factory settings.
After reseting I powered up my phone again and got to the setup wizard I chose my language which is Dutch and a loading screen appears. After a few seconds I get this message:Unfortunately, Setup Wizard has stopped.
I can still use my notification bar and turn on Wifi or connect to my pc.
I can't get to the home screen and get to settings.
Can somebody please help me? Thanks
ps: I'm sorry for my language I'm from Belgium and speak Dutch :silly:
Heyswa said:
To start off I have a Huawei Ascend y300 and rooted my phone following this post: http://forum.xda-developers.com/showthread.php?t=2290610
I followed every step and it worked perferctly but I couldn't acces the google play store. After some searching on the forum I got recommended to reset to factory settings.
After reseting I powered up my phone again and got to the setup wizard I chose my language which is Dutch and a loading screen appears. After a few seconds I get this message:Unfortunately, Setup Wizard has stopped.
I can still use my notification bar and turn on Wifi or connect to my pc.
I can't get to the home screen and get to settings.
Can somebody please help me? Thanks
ps: I'm sorry for my language I'm from Belgium and speak Dutch :silly:
Click to expand...
Click to collapse
no.
maybe a stock rom re-flash would do!!
Hello,
I bought a Huawei G520 and tried to install Google Playstore and delete the Chinese apps. I did something wrong and I made a factory reset. Now I have a huge problem : Everytime I start the phone or go out of sleep I am at the Lockscreen and after I unlock the phone There is this " Tap the Android" (It was once in English and then every other time in Chinese) When I tap it the Android turns white for a second and nothing happens. I cant flash the phone because I need to unlock the "BootLoader" and I need to write a Code in the dialpad that I cant acces. I cant access the Phone through USB because it shows it as a "Removable Disk". I factory reseted the phone a lot and it didnt helped a bit.
Does anyone know what I can do to use my Phone again, please????
please help me
bump
Help plese
Hello I have rooted my phone 2 days ago and I saw i can't acces google play , I searched the internet for how can i fix this but I only see the best method is to reset to factory settings , so that's what I have done and now when I'm to Welcome screen ( where i need to select the language ) I tap next , then wait like 1-2 minutes , and I got a error (Setup Wizard Has Stopped Working) and than I need to go back to select language and I can't open the phone , I can't do anything , Please If someone can help me I will really appreciate
Phone : Huaweii Ascend G510
Sorry for my bad english
Up
Bump!
same problem
I have a rooted galaxy core prime that I was having problems with so I had to hard reset it but now setup wizard stops and won't finish loading. Can someone please help. I'm not tech savvy about ROM or Flashing my device but I'm willing to try it if explained how to do it. Tyvm in advance
Hi I need some help with a customer J7 boost mobile, She purchased a Galaxy J7 and the phone was defective and she has to send it to Samsung for repair, the phone was fixed and send it back to her. the problem was that they reset her phone and now is asking for the google account password. ( she doesn't remember her login and password)
so the only solution was to bypass the security lock, I tried OTG cable and didn't work, I tried side sync and didn't work, the only working method was to call 611 and from there going to the internet, download shortcut maker and from there to settings and reset and voila! Right? BUT NO!!!
The first think I noticed is that doesn't let me go into developer mode by typing the build number, kernel,baseband, nothing :crying: developer was lock. the second is that when I reset the phone from the actual phone (with short cut maker) the phone will reset and then reinstall everything back again, I know because the customer had Spanish language by default, I tried again call 611 and go to the internet, download shortcut maker go settings check is any account on google (none) try to open developer mode (none) reset the phone and AGAIN the phone reset and and reinstall and lock again, I tried odin and root but google account block any try to root the phone, try odin with stock image and the same install and after reinstall and lock again. Could Samsung did something to the phone ? I seen videos unloking the J700H but nothing on boost mobile J700P? anyone knows hot to fix this ... thanks in advance
see this guy
http://forum.xda-developers.com/galaxy-j7/help/frp-samsung-j700t-t3464797
Hello
I have a problem with this tablet. It was used several people in my company. Someone tried to do a recovery but now, there's a message "this device was reset. To continue, sign in with a google account that was previously synced on this device". Nobody remember the account used.
I asked HP and they want me to pay nearly 400€ for that !!!
I think the USB debugging is OFF.
I can access the recovery mode by pressing POWER + VOLUME UP.
Options :
- reboot system now
- apply update from ADB
- wipe data/factory reset
- wipe cache partition
- apply update from sdcard
I tried wipe data and wipe cache partition, but same problem.
Can anyone help me ?
Thank you
Hi !
Unfortunately it looks like the tablet has been locked by Google via the google account after a factory reset , account which has been set-up previously
I don`t think you have any option considering that the usb debugging has been not enabled so you can`t use any adb commands if there were any workarounds available
The recovery commands you have there doesn`t help on this matter
Basically the manufacturer is the one who can help you out
You can search on Google or youtube , the issue is called FRP bypass
Good luck !
xanthrax said:
Hi !
Unfortunately it looks like the tablet has been locked by Google via the google account after a factory reset , account which has been set-up previously
I don`t think you have any option considering that the usb debugging has been not enabled so you can`t use any adb commands if there were any workarounds available
The recovery commands you have there doesn`t help on this matter
Basically the manufacturer is the one who can help you out
You can search on Google or youtube , the issue is called FRP bypass
Good luck !
Click to expand...
Click to collapse
Thank you