[Q] Stuck in setup wizard after factory reset - General Questions and Answers

To start off I have a Huawei Ascend y300 and rooted my phone following this post: http://forum.xda-developers.com/showthread.php?t=2290610
I followed every step and it worked perferctly but I couldn't acces the google play store. After some searching on the forum I got recommended to reset to factory settings.
After reseting I powered up my phone again and got to the setup wizard I chose my language which is Dutch and a loading screen appears. After a few seconds I get this message:Unfortunately, Setup Wizard has stopped.
I can still use my notification bar and turn on Wifi or connect to my pc.
I can't get to the home screen and get to settings.
Can somebody please help me? Thanks
ps: I'm sorry for my language I'm from Belgium and speak Dutch :silly:

Heyswa said:
To start off I have a Huawei Ascend y300 and rooted my phone following this post: http://forum.xda-developers.com/showthread.php?t=2290610
I followed every step and it worked perferctly but I couldn't acces the google play store. After some searching on the forum I got recommended to reset to factory settings.
After reseting I powered up my phone again and got to the setup wizard I chose my language which is Dutch and a loading screen appears. After a few seconds I get this message:Unfortunately, Setup Wizard has stopped.
I can still use my notification bar and turn on Wifi or connect to my pc.
I can't get to the home screen and get to settings.
Can somebody please help me? Thanks
ps: I'm sorry for my language I'm from Belgium and speak Dutch :silly:
Click to expand...
Click to collapse
no.
maybe a stock rom re-flash would do!!

Related

[Q] Huawei G520-Everytime I start the phone I need to

Hello,
I bought a Huawei G520 and tried to install Google Playstore and delete the Chinese apps. I did something wrong and I made a factory reset. Now I have a huge problem : Everytime I start the phone or go out of sleep I am at the Lockscreen and after I unlock the phone There is this " Tap the Android" (It was once in English and then every other time in Chinese) When I tap it the Android turns white for a second and nothing happens. I cant flash the phone because I need to unlock the "BootLoader" and I need to write a Code in the dialpad that I cant acces. I cant access the Phone through USB because it shows it as a "Removable Disk". I factory reseted the phone a lot and it didnt helped a bit.
Does anyone know what I can do to use my Phone again, please????
please help me
bump
Help plese

Setup Wizard Error After Factory Reset (Rooted Phone)

Hello I have rooted my phone 2 days ago and I saw i can't acces google play , I searched the internet for how can i fix this but I only see the best method is to reset to factory settings , so that's what I have done and now when I'm to Welcome screen ( where i need to select the language ) I tap next , then wait like 1-2 minutes , and I got a error (Setup Wizard Has Stopped Working) and than I need to go back to select language and I can't open the phone , I can't do anything , Please If someone can help me I will really appreciate
Phone : Huaweii Ascend G510
Sorry for my bad english
Up
Bump!
same problem
I have a rooted galaxy core prime that I was having problems with so I had to hard reset it but now setup wizard stops and won't finish loading. Can someone please help. I'm not tech savvy about ROM or Flashing my device but I'm willing to try it if explained how to do it. Tyvm in advance

Too many pattern attempts

Hello,
I have a chinese phone (Jugate P328) locked because too many pattern attempts. I can´t connect it to internet and I can´t access to recovery and make a factory reset.
Can anyone help me?
Thanks in advance. (Sorry for my bad english)
jcmarques92 said:
Hello,
I have a chinese phone (Jugate P328) locked because too many pattern attempts. I can´t connect it to internet and I can´t access to recovery and make a factory reset.
Can anyone help me?
Thanks in advance. (Sorry for my bad english)
Click to expand...
Click to collapse
Use ADB in Android SDK tool to remove the lock, search it in google. This will work if you enabled USB Debugging option in Development option in your phone.
jcmarques92 said:
Hello,
I have a chinese phone (Jugate P328) locked because too many pattern attempts. I can´t connect it to internet and I can´t access to recovery and make a factory reset.
Can anyone help me?
Thanks in advance. (Sorry for my bad english)
Click to expand...
Click to collapse
You have to do a hard reset your phone. go to boot menu by pressing power button and volume button -.
there factory reset (etc) option will be seen. choose with volume key and press power button to ok. wait till the process end.
Your pattern lock will be removed.
(Note: all data of your mobile will be deleted by this process).
Thanks for the replies.
The only options that i saw in recovery are:
spreadtrum factory test
full phone test
item test
BT MUT mode
clt collabution
And the usb debugging isn´t enabled.
hello! guys i have the same mobile, (Jugate P328) and it's stuck ! like i turn on the mobile and the screen has a picture, that changes place only. i cant acess menu nor do nothing! i tried the power button and vol button - and all appears is to turn off the mobile. can u guys help me? im very noob at this ^^ sad tho
thanks in advance
ps: i dont know how to access mobile from pc. i think usb debugging isn´t enabled. all it does it recharge the battery lol xD help pls <3
i would love to reset this

Q help lenovo s5000-h stuck in loading start screen

Please help me guys
device : Lenovo s5000-h
android version: 4.4.2
here's what happen, my tablet got slower because of too much apps. Installed by my daughter now, what i did is hard reset it,then after formatting it was successful, now after that it says the device needs to be updated, after it downloaded the update then ask for a reboot, after that it started to install the update, im not doing anything and wait the suddenly it say failed to updated.. After that i rebooted it again, now im stuck on starting screen after the lenovo logo appears... I provided some screenshots... I dont know what to do please help me anyone who is good in this... Any advice and help would be pretty much appreciated..
Regards vans
With my tablet this extacly issue happens but I tried pressing Power OFF and only VOLUME UP !! trigger then a chinese menu appeard. Here it is opposite as to the menu in English, because you use volume up to accept and volumne down to go through different modes - select the only option that contains some letters in English (smth like e MMC...) : this will bring your tablet to the point as if it was recently purchased so you will need to start from setting it up again, but it works again and very smoothly. hope it will help!. You can watch detail for this process in Lenovo S5000 Tablet Manual. Good luck.

no keyboard , voice only

dear all
i have installed firmware nxt-l29c185b580 , i decided to hard reset my phone and after hard reset finish i was asked for FPR , i actually know the email and password but i have no way to input them due to no keyboard only google voice
i spent nights trying to input but i could not by pass that through google voice only.
is there any way to install the keyboard from fastboot with computer connect and why did it disappear after hard reset ?
is there any way to remove this connected email from my device remotely from my computer or any web page ( i have access to this email from my chrome "
fast boot show " relocked bootloader " and " FRP locked
what can i do to get my phone back please help , what is the possible solution now
thank you guys , my issue has been resolved by roll back update and full firmware of marshlome and my keyboard came back and i resolved my issue
thank you
Hii, I am facing a problem in my huawei mate 8. After a hard reset the keypad disappeared from the mobile & I am not able to setup the mobile. Could anyone help with any suggestions......
My mobile is totally noy operational,while doing the factory reset,keypad not appearing for the password input.How to get the keypad back.....?
a year ago I had the same problem and I think it was solved by installing the rom again or using another rom.
No need to reflash or go back
Guys is simple .You cannot insert the credentials to your router and so on because the keyboard is missing ?First grab another phone and start a hotspot without any password.connect with mate on that hotspot,then spell pressing the circle clear and loud Fdroid.Install ,then on the search in fdroid say liud and clear keyboard .install the first keybord aviable on fdroid .have fun and remamber ,no need to flash enyhing .think twice!

Categories

Resources