Database Info

TouchWiz Rom For Gionee Gpad G2

TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05

1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom

That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today

This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...

Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee

Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc

Pure Xperia Rom For Gionee Gpad G2

Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from Downloads​N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20

steps error?
Please check step1b and step 9, am seeing Touchwiz Rom. This is pure Xperia procedure. Any mix up?

bug free rom
very stable and sweet rom but my battery takes longer to charge. any solution?

deleted...

Change Charger
haykay2005 said:
very stable and sweet rom but my battery takes longer to charge. any solution?
Click to expand...
Click to collapse
Use Samsung Charger or Sony Charger

i was excited to know that there was an upgrade available for my device. and this ROM is more beautifull than i anticipated. Great Work.
it is 4.2.2 taking up more RAM than stock version i feel. i posted a feature request hope that you can add that. and also i dont know where is the USB debugging option in this ROM.

can not download any app from playstore.
DevSkilled said:
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from Downloads​N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
Click to expand...
Click to collapse
whenever i try downloading an app from google play the error pops up. "can not b downloaded due to an error. (error retrieving information from server. [RPC:S-7AEC-7]) please help

The development of the mate 7 AOSP android 6

I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
Any one can ask for help from a developer or can fix some bugs will be a great help
We have 4 places or more to ask for developers help in
Xda site and Huawei club site in both Huawei mate 7 and honor 6 section
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code: https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.​
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.​
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code: https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017

mhmedahmed1996 said:
I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code:https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code:https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017
Click to expand...
Click to collapse
Thanks :good::good::good:

fazi2015 said:
Thanks :good::good::good:
Click to expand...
Click to collapse
Any one have any news about it can write it here
We can update the post with every news

Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though

There's still a way to get AOSP to the mate 7.
Last resort: Find a dev and pay him. On reddit r/android you could find devs. Perhaps if everybidy whos interested pays a minor fee, the dev is willing to help us.
https://www.reddit.com/r/Android/comments/69o2t8/huawei_mate_7_aosp_devs_wanted/
---------- Post added at 11:19 PM ---------- Previous post was at 11:12 PM ----------
WildfireDEV said:
Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though
Click to expand...
Click to collapse
First of all, thanks.
Second, There's a document on github which mentions bugs and you can find people mentioning bugs in the old thread: https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656/page22

---

Camera fix for all lineage 14.1 based roms

This is only temporary and the project along with the thread will be both deleted as soon as LG releases our Android 7 drivers later this year.
Installation guide​1. Install footej camera from play store.
2. Run the app to initialise it's settings.
3. Reboot to recovery and flash the camera fix .zip that you will download from here.
4. Reboot and enjoy.
**My installer won't delete the stock camera app because the fix it's only temporary. So if you want to delete the stock camera app do it on your own record with an 'app remover' app.
Click here to download the camera fix.
Special Thanks to:
Footej Camera
and to Semaphore Inc
XDA:DevDB Information
[CAMERA][FIX][LINEAGE][14.1]Camera Fix[CAMERA][FIX][LINEAGE][14.1], App for all devices (see above for details)
Contributors
kessaras
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-05-16
Created 2017-05-16
Last Updated 2017-05-16

Reserved
1. If you skip a step , you won't fix anything. So don't complain.
2. To shot a photo you first need to touch at the spot you want to focus and then hit to take a photo.
**This is the only way to shot with flashlight. Otherwise you will hit a bug caused from our missing drivers.
3. After completing the steps , you can go to settings and choose to save your photos to the external sd if you want to.
Don't ask later for the impossible , i only found an easy way to bypass the bugs caused from our missing drivers.

duplicate thread , original here https://forum.xda-developers.com/g4/general/camera-fix-lineage-14-1-based-roms-t3607574
thread closed
Dan - forum moderator

[ROM][CM13][PORT][6.0.1] Phicomm E653 Cyanogenmod 13 Marshmellow

What's working:
device boot
wifi and hotspot
ril with
camera both and flash light
BT
video recording by screen recorder
storage internal and extsdcard
video encoding decoding
device
Know issue:-
external speakers
you tell me
Screenshots
change log :-
Code:
beta 1
initialize Release...
beta 2
fixed wifi ril camera
requirements before flashing -
1 . Hit thanks and Join Group on telegram =.> t.me/kyle02 :laugh:
2. You should have installed this twrp on your device
Get Twrp here https://forum.xda-developers.com/android/general/recovery-phicomm-e653-t3750807
Install instructions:-
Wipe data , cache and system :good:
Get the rom http://www.mediafire.com/file/iczkxmbp4qe35l0/cm13_beta_2.zip/file
Flash the cm-13 beta2 e653.zip
Reboot :fingers-crossed:
cm13 E653 phicomm , ROM for all devices (see above for details)
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Twrp 3.2.1.0
Based On: Cyanogenmod
Version Information
Status: Testing
Current Beta Version: 2
Beta Release Date: 2019-01-16
Created 2018-03-11
Last Updated 2019-01-16
Click to expand...
Click to collapse

setting app crash fixed
exsdcard fixed
BT is working now
Mtp fixed
flash this kernel by install img option from twrp
Rom is here
http://www.mediafire.com/file/zays247po11f8ue/cm-13_beta1_e653.zip

Reserved

rom updated to beta 2
http://www.mediafire.com/file/iczkxmbp4qe35l0/cm13_beta_2.zip/file
Both camera and flash light working fixed:good:
Also video decoding working

in case of black screen in camera or
cannot connect to camera in cm13 beta 2
use this app
https://m.apkpure.com/footej-camera/com.footej.camera

speaker has no sound!
Hi,
I just downloaded this rom and it is working except for the speaker (using headphone is ok). Any way to get another fix for it.
Thank you.