TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today
This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...
Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee
Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc
Related
Rom Version :MIUI_V5_4.4.20
Android Version : 4.2.1
Rom Features: http://en.miui.com/features.php
Copyrights: DevSkilled
Reviewed By : NafeesKhabir
First developed For XOLO Q800 by Stas2z
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download The MIUIv5_4.4.20.zipfile(450mb+) from Download Section
2.Extract the zip
* You will get one Folder And One Zip
* Place Them To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>MIUIv5_B4.4.20.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now Reboot Into TWRP again
16. Select Restore>MIUIV5B4.4.20 [ This is For fix Apk Installation Error]
17.Wipe>Cache,Dalvik Cache
18.Reboot System
19.Now You are Done
Without Restoration You will Face Apk Installation error
If You Face Google Play Issue the Simply sign out From Google Account Update it to latest version (Go to settings Clean Data and cache of Google Apps and Sign in Again)
N.B Back up your Current ROM please before Flashing
XDA:DevDB Information
Gionee Gpad G2 Custom Rom 4, ROM for all devices (see above for details)
Contributors
DevSkilled, stas2z
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.20
Stable Release Date: 2014-05-29
Created 2014-05-29
Last Updated 2014-05-30
Nice ?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Bhai,
1. The camera application does not open properly in Primo N1 model. When I open the camera app, the app opens but can not show any picture, the screen is black. the the message says, the app has stopped unfortunately.
2. Some google apps does not update such as gmail, text to speech etc. during update error message is shown which includes -110 number.
Please help is this issue.
DevSkilled said:
Rom Version :MIUI_V5_4.4.20
Android Version : 4.2.1
Rom Features: http://en.miui.com/features.php
Copyrights: DevSkilled
Reviewed By : NafeesKhabir
First developed For XOLO Q800 by Stas2z
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download The MIUIv5_4.4.20.zipfile(450mb+) from Download Section
2.Extract the zip
* You will get one Folder And One Zip
* Place Them To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>MIUIv5_B4.4.20.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now Reboot Into TWRP again
16. Select Restore>MIUIV5B4.4.20
17.Wipe>Cache,Dalvik Cache
18.Reboot System
19.Now You are Done
N.B Back up your Current ROM please before Flashing
XDA:DevDB Information
Gionee Gpad G2 Custom Rom 4, ROM for all devices (see above for details)
Contributors
DevSkilled, stas2z
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.20
Stable Release Date: 2014-05-29
Created 2014-05-29
Last Updated 2014-05-30
Click to expand...
Click to collapse
This IS Not Bug
raihankabir_1 said:
Bhai,
1. The camera application does not open properly in Primo N1 model. When I open the camera app, the app opens but can not show any picture, the screen is black. the the message says, the app has stopped unfortunately.
2. Some google apps does not update such as gmail, text to speech etc. during update error message is shown which includes -110 number.
Please help is this issue.
Click to expand...
Click to collapse
This Time Do a clean Flash And After Flashing Do wipe(Cache/Dalvik)
AFter Restore Again Do wipe(Cache/Dalvik)
The Install LAtest Google Playstore with Gapps.
And Can Check this
gapps ok, camera still not working
DevSkilled said:
This Time Do a clean Flash And After Flashing Do wipe(Cache/Dalvik)
AFter Restore Again Do wipe(Cache/Dalvik)
The Install LAtest Google Playstore with Gapps.
And Can Check this
Click to expand...
Click to collapse
Thanks for the solution. I can now update the apps via google play store. I had to delete both data and cache of some google applications such as, play store, google services, hangout etc and also deleted the google account and then restarted and added google id again. then the play store worked properly.
2. Still the camera application doesn't work.
Camera Is Working tested by Me
DevSkilled said:
This Time Do a clean Flash And After Flashing Do wipe(Cache/Dalvik)
AFter Restore Again Do wipe(Cache/Dalvik)
The Install LAtest Google Playstore with Gapps.
And Can Check this
Click to expand...
Click to collapse
Congratulations For Google Play store
Camera Is 100% Working See the attachment for Prove.
Please update Kitkat rom. Thank you.
walton primo n1
hello bro ..i did a clean install but when i tried to do restore for apk install error fix there was no file... what should i do now.. pls reply asap
any updates for this rom?
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from DownloadsN.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
steps error?
Please check step1b and step 9, am seeing Touchwiz Rom. This is pure Xperia procedure. Any mix up?
bug free rom
very stable and sweet rom but my battery takes longer to charge. any solution?
deleted...
Change Charger
haykay2005 said:
very stable and sweet rom but my battery takes longer to charge. any solution?
Click to expand...
Click to collapse
Use Samsung Charger or Sony Charger
i was excited to know that there was an upgrade available for my device. and this ROM is more beautifull than i anticipated. Great Work.
it is 4.2.2 taking up more RAM than stock version i feel. i posted a feature request hope that you can add that. and also i dont know where is the USB debugging option in this ROM.
can not download any app from playstore.
DevSkilled said:
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from DownloadsN.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
Click to expand...
Click to collapse
whenever i try downloading an app from google play the error pops up. "can not b downloaded due to an error. (error retrieving information from server. [RPC:S-7AEC-7]) please help
SYSTEM PARTITION NEEDED
Features of Android 4.4 KitKat on MicroMaX Canvas 2+ A110Q
-Latest Android 4.4.2
-Latest Android 4.4.2 Elife E3 Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
And Many More.........
ScreenShots
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** feature updates **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : denisj from 4pda, Besik_13 xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
DOWNLOADS
Mirror1
uf
For Root Problem Flash This
XDA:DevDB Information
Stock Elife E3 4.4.2 For MicroMaX Canvas 2+ A110Q, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: 4pda
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4
Version Information
Status: Stable
Created 2014-11-12
Last Updated 2014-11-12
Great job buddy.. Do you have any known bugs as of yet coz I'll be installing this to my friend's mobile..
SYSTEM PARTITION NEEDED
Features of Android 4.4 KitKat on MicroMaX Canvas 2+ A110Q
-Latest Android 4.4.2
-Latest Android 4.4.2 Stock Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
And Many More.........
Bugs :
Tell if you see any more....
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** feature updates **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : forum.pittech.net, DinasNet, 4pda, Besik_13 xda developers.
If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
DOWNLOADS
customroms.theSwapnil.cOM
XDA:DevDB Information
LEGOO LEAD3 4.4.2 for MicroMaX Canvas 2+ A110Q (MTK6589), ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=577004&st=1160#entry33976947
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4
Version Information
Status: Stable
Created 2014-12-04
Last Updated 2014-12-04
Awesome one.:good:
Only thing play store not worked for me.
I tried all the ways google suggest.
Introducing pure Resurection RemixOS with Android 5.1.1 version 64 bit ( CM12.1 ) for Lenovo
A6000/Plus
ROM Author: Stuep D
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first, see tutorial here to upgrade it to Lollipop)
Install TWRP Recovery tutorial here
Download NEW Resurection Remix 5.1.1 ROM from here https://drive.google.com/file/d/0Bxq...VG8/view?pli=1
Installing Resurection Remix Cyanogenmod 12.1 on Lenovo A6000
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes) XDAevDB Information
RessurectionRemix 5.5.8 ROM for lenovo-a6000
ISSUES:
Some Apps force close upon restoration through Titanium Backup.
SOLUTION:
Uninstall those Apps and then install again from Play store or from other stores.
Contributors
Stuepd
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-01-16