Hi this app does not work on miui but should work on cm7
https://market.android.com/details?...GwsMSwxLDEsImNvbS52aXNpb24udmlwY2FsbHNlbmciXQ..
can anybody fix this that this works?
i get these infos from the developer:
cant test it with miui but I have heavily test it with CM7 and use it myself for 7 months.
So I dont think that ROM is problem. But on some phones problem exists and those phones want ring when you change silent to normal mode after call already started.
No developer can do anything about that .
Check if your ring volume level set to some normal level, use widget to go to silent not volume down!
If problem persiss try checking "force ring" in app with media volume set to some normal level. (when force ring is used media volume is important not ring volume!)
I found out that if i use this app to mute all without media sound then it works. but in miui normally is the media sounds also on loud but works not. any idea why? https://market.android.com/details?...t=W251bGwsMSwxLDEsImNvbS5jYi52b2x1bWVQbHVzIl0.
Work in complete silence and eliminate the ram/cpu noises that come out of the Tab Pro speakers with this intuitive app.
Hi all! A lot of people are annoyed by the noises that come out of the Tab Pro speakers. Me included, that's why I made an app for that.
!!! When active it mutes all system sounds, including notifications and incoming calls !!!
It's a service that forces audio to the headphones when you put the volume to zero. When the audio is forced to the headphone it is shutting down the speaker amplifier circuit and thus eliminates noises. If you want to have audio again, simply raise the volume with the hardware buttons.
Features:
No CPU/RAM noises! Low memory footprint, event based only. Wakelocks free, save your battery!
Known limitations:
- Mutes all system sounds (notifications, incoming calls etc.) if enabled.
- Only hardware volume buttons are monitored (for efficiency reasons).
- Tested only on stock android 4.4.2 on Tab Pro 8.4 and Nexus 7 2012 running Lolipop 5.1 (dirty unicorns 9.8)
- No enable/disable feature (service <-> app communication probably increases memory footprint a lot)
Installation:
Install app, run once or reboot to get the service started.
Uninstall
Remove the app "NoiseKill" to inactivate and remove the service.
Permissions:
RECEIVE_BOOT_COMPLETED to start the service at boot
MODIFY_AUDIO_SETTINGS well... It probably is to modify the audio settings right?!
To other developers:
I am still looking to allow the playback of notifications / incoming calls etc while still suppressing the speaker noises. But I didn't found a way to get this information event based (I could poll though but it would drain the battery very fast).
Please let me know what you think of it.
Awesome! Asked someone for this nearly a year ago but they said it wasn't possible. It seems to be working mostly, sometimes at random it doesn't though. I think when you are at any volume level and you press and hold your volume-down button until muted, the app won't recognize that you have muted until you press once more (when already muted). Only a minor nuisance though, since the noise coming from the speakers is infinitely worse. Thank you very much for this app!
Edit: By the way, running CM12.1 on a TabPro 8.4 here.
Spiceworm said:
Work in complete silence and eliminate the ram/cpu noises that come out of the Tab Pro speakers with this intuitive app.
Hi all! A lot of people are annoyed by the noises that come out of the Tab Pro speakers. Me included, that's why I made an app for that.
!!! When active it mutes all system sounds, including notifications and incoming calls !!!
It's a service that forces audio to the headphones when you put the volume to zero. When the audio is forced to the headphone it is shutting down the speaker amplifier circuit and thus eliminates noises. If you want to have audio again, simply raise the volume with the hardware buttons.
Features:
No CPU/RAM noises! Low memory footprint, event based only. Wakelocks free, save your battery!
Known limitations:
- Mutes all system sounds (notifications, incoming calls etc.) if enabled.
- Only hardware volume buttons are monitored (for efficiency reasons).
- Tested only on stock android 4.4.2 on Tab Pro 8.4 and Nexus 7 2012 running Lolipop 5.1 (dirty unicorns 9.8)
- No enable/disable feature (service <-> app communication probably increases memory footprint a lot)
Installation:
Install app, run once or reboot to get the service started.
Uninstall
Remove the app "NoiseKill" to inactivate and remove the service.
Permissions:
RECEIVE_BOOT_COMPLETED to start the service at boot
MODIFY_AUDIO_SETTINGS well... It probably is to modify the audio settings right?!
To other developers:
I am still looking to allow the playback of notifications / incoming calls etc while still suppressing the speaker noises. But I didn't found a way to get this information event based (I could poll though but it would drain the battery very fast).
Please let me know what you think of it.
Click to expand...
Click to collapse
The app doesn't seem to be working for CM13. I believe the way the volume is controlled was changed in Marshmallow. Are you planning on updating the app?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHARACTERISTICS:
Volume Mod Version:
- Increase incall volume
- Increase handsfree volume
- Increase multimedia playback volume
- Increase bluetooth multimedia playback volume
- Increase bluetooth incall volume
- Increase VoLTE incall volume
- Increase Wifi Call volume
- Improved mic sensibility on video recording
- Improved mic sensibility on voice recording
- Improved mic sensibility during calls on speaker mode
Dual Speaker Version:
- Activate dual speaker when playing media
- Increase incall volume
- Increase handsfree volume
- Increase multimedia playback volume
- Increase bluetooth multimedia playback volume
- Increase bluetooth incall volume
- Increase VoLTE incall volume
- Increase Wifi Call volume
- Improved mic sensibility on video recording
- Improved mic sensibility on voice recording
- Improved mic sensibility during calls on speaker mode
What is Dual Speaker:
The Dual Speaker Version activate the handset speaker (1 in picture) when playing media. Creating a rich sound and a surround effect.
VERSIONS:
Revert to stock:
- Disable all modification and return to stock values
Volume Mod:
- Increase incall volume
- Increase handsfree volume
- Increase multimadia playback volume
- Increase bluetooth multimedia playback volume
- Increase bluetooth incall volume
- Increase VoLTE incall volume
- Increase Wifi Call volume
- Improved mic sensibility on video recording
- Improved mic sensibility on voice recording
- Improved mic sensibility during calls on speaker mode
Dual Speaker
- Activate dual speaker when playing media
- Increase incall volume
- Increase handsfree volume
- Increase multimadia playback volume
- Increase bluetooth multimedia playback volume
- Increase bluetooth incall volume
- Increase VoLTE incall volume
- Increase Wifi Call volume
- Improved mic sensibility on video recording
- Improved mic sensibility on voice recording
- Improved mic sensibility during calls on speaker mode
WHAT VERSION DO YOU NEED
UNIVERSAL VERSION
- Samsung S7 930F
- Samsung S7 930FD
- Samsung S7 Edge 935F
- Samsung S7 Edge 935FD
W8 VERSION
- Samsung S7 930W8
- Samsung S7 Edge 935W8
S VERSION
- Samsung S7 G930S
- Samsung S7 Edge G935S
INSTALLATION:
1 - Make a backup
2 - Flash zip
3 - Reboot
THE DUAL SPEAKER VERSION INCLUDES ALL VOLUME MODS. IT'S NOT NECESARY TO FLASH VOLUME MOD FIRST.
IF YOU HAVE DUAL SPEAKER AND WANT TO DISABLE ONLY THE DUAL SPEAKER FUNCTION, FLASH VOLUME MOD ZIP.
IF YOU HAVE DUAL SPEAKER OR VOLUME MOD VERSION AND WANT TO REVERT TO STOCK, FLASH THE REVERT TO STOCK ZIP.
(Is not neccesary to clean dalvik cache)
(When flash stock, a new version or changin between volume and dual speaker mods, is not necessary to flash stock or anything. Only flash the zip that you want)
DOWNLOAD
CHANGELOG:
V1
- Dual speaker
- Increased headset volume
- Increased handset volume in calls
- Increased volume for dual speakers
V2
- Increase Bluetooth volume
- Little increased handset speaker volume when playing media
V3
- Fix a problem in the sound redirection to handset speaker when playing media
- Now the call speaker sound much better when playing media
V4
- Increase call volume
- Increased headphone volume (Is the max for original S7 headphones, but perfect for big headphones)
- Slightly decrease Bluetooth call and media volume
V5 BETA 1
- This version is for test the incall volume and bluetooth media volume.
- Test it and say me if there is any enhacement
V5
- New values for incall volume and bluetooth media
- Values are slightly different to previous V5 Beta 1
V6
- Clean modification of files
- Restore all unnecesary modified values
- Slightly decreased dual speaker volume when playing media
- Other changes for fix the drop volume and notifications distorsion.
- Fix a error in the V6 beta that don't send two sound channel to handset speaker (Dual Speaker Version)
V7
- Completely fix a error in the V6 that don't send two sound channel to handset speaker (Dual Speaker Version)
- Add support for 930W8 and 935W8 models (Especific Mod version for this models)
- Add support for 930S and 935S models (Especific Mod version for this models)
Test the version for W8 and S models and say me if all is fine please. Thanks!!
V8
- Test version for incall volume
- Totally revised values
- VoLTE incall volume increased
- Bluetooth multimedia volume increased
- Reduced distortion when playing media (I will increase values on v9. I need to do more test)
V9
- Better incall volume values
- Increased bluetooth volume when playing media (Test it please and say me if this value is sufficient)
- Slighly increased headphones volume (Specially for people that don't use original Samsung headphones)
- Notification volume changes (Fix for low volume notifications in certain Apps. Test it and say me if has changed the facebook notification volume)
- I continue working on Incall Dual Speaker....
V9.1
- Revert headphones volume to v8 value
- Slighly decreased bluetooth volume. I push too much on V9.
V10
- Increased Speaker volume.
- Incall volume slighly decreased for eliminate distortion.
- Incall "Extra Volume Button" value slighly decreased for eliminate distortion
- W8 Model versions
- S Model Versions
V11
- Dual Speaker for incall "Speaker" mode (Test)
- Fix incall distortion (New values. Much more loud than original but not loud than V10)
- New values for incall volume and extra incall volume.
V12
- Totally revised files.
- Restored unnecesary values
- v12 is a test version. On v13 i will revise multiple values that i revert on v12 for see if i can fix distortion on many notifications.
- Changes in hearphone volume. I think that now the hearphone sound is better
- Other value changes for test different volumes
V13
- Enhaced Dual Speaker Volume
- Better incall sound quality. (Testing)
- Now the surround effect when playing media is the best so far since this proyect start
- Ringtone volume changed for fix the notification sound when listening music with BT. (Testing).
V13.5
- Fix incall volume (Now sounds much better and louder than stock)
- Better incall dual speaker sound (I continue investigating this section)
V14
- Increase volume for notifications when incall or listening multimedia content
- W8 and S versions
- VoLTE incall volume increased
- WifiCall incall volume increased
- VoIP incall volume increased
- VideoCall incall volume increased
- Dual speaker for VoLTE incall speaker mode
- Dual speaker for WifiCall incall speaker mode
- Dual speaker for VoIP incall speaker mode
- Dual speaker for VideoCall incall speaker mode
V15
- Decreased the earpiece volume (Actual volume is fine with all content but with music, the earpiece has a lot of distortion. I decreased a little the volume for search a stability between music and other content)
- Decreased headphone volume (Actual volume has noise and is louder than i spected)
- Decreased a little bluetooth volume for fix bass distortion
- 930F - 935F - 930FD - 935FD: Include all changes on mixer_gains.xml included on last XXU1APD3 firmware. This changes are focused on improve mic quality on all type of calls (Normal, VoLTE, Wifi, ...)
V16
- Fix earpiece distortion when playing music (Better treble redirection to earpiece. Create an awesome sound effect with minimum distortion. Test it yourself listening music and covering earpiece with your finger)
- Fix earpiece distortion when ringtone playback
- Fix high volume and distortion on Hangout and similar software (Testing)
- Fix headset distortion on high volume
- Improved mic sensibility on video recording (Tested and is awesome)
- Improved mic sensibility on voice recording
- Improved mic sensibility during calls on speaker mode
* Remember that you have a button during calls that add extra volume. The values of this button are also tweaked by me for sound even more louder for low volume calls
* The extra volume button on incall screen also works on incall speaker mode.
V17
This version is for separate the mod on different volume levels.
- 3 different volume level for Volume Mod
- 3 different volume level for Dual Speaker Mod
(The difference between levels is only multimedia volume. On next version i will change all volumes between levels)
Level 0 - Stock Volume
Level 1 - Slightly increased values
Level 2 - Intermediate version
Level 3 - Best volume values (I always use this version)
V18
- Totally clean version
- Deleted unnecessary modifications
- Version for W8 Models
- Version for S Models
- Version for Note 7 Ported Roms (Test)
Level 0 - Stock Volume
Level 1 - Slightly increased values
Level 2 - Intermediate version
Level 3 - Best volume values (I always use this version)
V19
- First Android 7.0 release
Thanks I just tried ur sound speakers mod and its works great with nice dual speakers sound
can u include that when calling bez its running on one when using speakers
Great work
Works very well. Test the speakers and there is no distortion :good:
do i need gto root my s7 or is there any chance to use the mod without root ?
jassu said:
do i need gto root my s7 or is there any chance to use the mod without root ?
Click to expand...
Click to collapse
You need TWRP to flash the file, if I´m not wrong.
Dual speakers? isn't the S7 have a mono speaker?
Derpling said:
Dual speakers? isn't the S7 have a mono speaker?
Click to expand...
Click to collapse
The mod activate the handset speaker when playing media.
The S7 have powerfull main and handset speaker.
Version V2 uploaded.
V2
- Increases Bluetooth volume
- Little increased Headset speaker volume when playing media
I don't have any Bluetooth for test the values. If anyone can test the V2 with a bluetooth in comunication and playing media.
jassu said:
do i need gto root my s7 or is there any chance to use the mod without root ?
Click to expand...
Click to collapse
No, sorry. Without root you can't flash zips or edit manually the needed files.
Stock version
Can you please upload a stock version?
mleon88 said:
Can you please upload a stock version?
Click to expand...
Click to collapse
Yes, in 10 minutes i upload a stock versión for you
LITE
- Dual speaker
- Slightly modified stock volume values
zubi182 said:
Yes, in 10 minutes i upload a stock versión for you
Click to expand...
Click to collapse
Is the Lite version the stock version? (please upload stock if it is not because it has screwed up my phone calls)
---------- Post added at 08:12 PM ---------- Previous post was at 08:07 PM ----------
zubi182 said:
LITE
- Dual speaker
- Slightly modified stock volume values
Click to expand...
Click to collapse
Please upload stock ASAP
mleon88 said:
Is the Lite version the stock version? (please upload stock if it is not because it has screwed up my phone calls)
---------- Post added at 08:12 PM ---------- Previous post was at 08:07 PM ----------
Please upload stock ASAP
Click to expand...
Click to collapse
What is your problem with calls?
zubi182 said:
What is your problem with calls?
Click to expand...
Click to collapse
The person on the other line just hears weird noises.. I am using the 930W8 variant though...
LIke I said, please post a stock version asap so I can correct this and leave my house lol.. im waiting on you!
mleon88 said:
The person on the other line just hears weird noises.. I am using the 930W8 variant though...
LIke I said, please post a stock version asap so I can correct this and leave my house lol.. im waiting on you!
Click to expand...
Click to collapse
Please, anyone with a 930F or other variant can confirm problems in calls?
I will upload a stock version. One moment.
EDIT:
I make two calls to different persons and they have no problem to hear me. They say that hear me perfect.
Is posible that your model have diferent values in sections of the archives that i don't edit but are different on stock.
zubi182 said:
Please, anyone with a 930F or other variant can confirm problems in calls?
I will upload a stock version. One moment.
EDIT:
I make two calls to different persons and they have no problem to hear me. They say that hear me perfect.
Is posible that your model have diferent values in sections of the archives that i don't edit but are different on stock.
Click to expand...
Click to collapse
Honestly bro I can't even confirm if this mod is what is causing the issue unless you upload a stock file and see if it fixes it. i will let you know once you post stock.
CONFIRMED
Working perfect on 930F
Working perfect on 935F
Do I need to flash v1 then v2 then 3 and then v4?
Or just choose one of them?
daproject said:
Do I need to flash v1 then v2 then 3 and then v4?
Or just choose one of them?
Click to expand...
Click to collapse
Only flash V4 and enjoy
● Okay, so I have been plagued by the stacked clock and volume issues on my AT&T Samsung Galaxy S 8+.
After hours on the phone with Samsung, and countless google searches I have compiled some solutions and I wanted to share them with you.
● You've all seen the Youtube Videos telling you how the answer to all your dreams comes via the Theme including a Horizontal Lock Screen Clock. This is partially true, but as many of you know the clock changes back to stacked after you clear your notifications.
• Find your Theme with a Horizontal Lock Screen Clock. I use Minu Material_Black.
[MINU]Material Black
http://www.samsung.com/global/themestore/index.html?appId=minuhome.Material_Black&SITE_CODE=us
○ Next you need an apk that has a built in sticky notification optional setting.
• One such apk is also a partial solution to the volume problem, and it's called Speaker Boost. This apk ties to your media volume and also allows you to increase your volume past the factory limit. I have been using it on every Samsung device since my Sprint Epic 4G. It works best after a fresh boot.
Check out "Speaker Boost"
https://play.google.com/store/apps/details?id=mobi.omegacentauri.SpeakerBoost
☆ So now you have a Theme with a Horizontal Lock Screen Clock and an Apk with a sticky Notification optional setting to make the Clock STAY Horizontal on your Lock Screen with Speaker Boost control under it.
● Volume legally must be reduced every 20 hrs to 75% by your device without your consent automatically. The issue is if at that time you are using it the sliders all stay maxed even though it's actually only 75% volume.
○ The most annoying way to fix this is to reboot. That refreshes the 20 hr timer before you loose volume again.
○ A better option is to use an Apk.
• I use Bluetooth Volume Control. This Apk shows all of the volume sliders for your bluetooth devices with seperate sliders for call volume and media volume.
Check out "Bluetooth Volume Control"
https://play.google.com/store/apps/details?id=eu.darken.bluemusic
○ Okay, this part sucks but bare with me.
• Max out the volume dial on your Bluetooth device and your phone sliders.
• Power off your Bluetooth Device.
• lower the volume sliders to min in Bluetooth Volume Control Apk.
• Power on your Bluetooth Device.
• Increase volume sliders in Bluetooth Volume Control.
• Optional use Speaker Boost to go more, but not recommended to boost over 20%
○ Disable the warning.
• Settings/Sounds and Vibration/Volume 3 Dots upper right. Turn ON Media Volume Limiter and slide right.
☆ That fixed my call volume and media volume.
That's it gang I really hope this helps someone else!
What's new in Latest Build (4_15D) Update with May, 2020 Security Update? I found the following:
1. Best flawless performance ever. Animation time has been adjusted very well, fells buttery smooth.
2. Call recording option in dialer app. It has a big problem though: Call recording stars with the automatic voice "the call is now being recorded" that can be heard by both the caller and receiver!
3. Display size in Default mode has become bigger than the previous update.
4. Screen on time has been drastically reduced!!! Only 3 and half hour.
5. One bug: Phone's loudspeaker is not working!
What about your update? Please share in this thread.
jahangirbsmrau said:
What's new in Latest Build (4_15D) Update with May, 2020 Security Update? I found the following:
1. Best flawless performance ever. Animation time has been adjusted very well, fells buttery smooth.
2. Call recording option in dialer app. It has a big problem though: Call recording stars with the automatic voice "the call is now being recorded" that can be heard by both the caller and receiver!
3. Display size in Default mode has become bigger than the previous update.
4. One bug: Phone's loudspeaker is not working!
What about your update? Please share in this thread.
Click to expand...
Click to collapse
I feel like gaming is better now
Speaker is working
WhatsApp audio bug seems fixed
loud speaker is working for me too, no problem at all with speakers during phone calls.
Audio bug isn't there anymore (Whatsapp, tunein radio and so on...)
I don't have CALL RECORDING in phone app anyway.