Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Double tread
Inviato dal mio LG-P500 con Tapatalk 2
??.. can u reply in english please.
problem solved.
CLOSE THREAD
help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.
clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
praik96 said:
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
Click to expand...
Click to collapse
Don't worry my friend one and only one solution just flash the stock ROM with flashing tools. You can search in XDA thread regarding this....
Else download the latest from this link
http://xdafirmware.com/micromax-a117
For flashing instructions follow this link-
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
not able to install other ROM s in a117
Sir I installed xld ROM 1.3 first time ,it booted successfully but it lacks sim toolkit (sim not supporting) ,whenever I try to install any other ROM it sticks to the boot image (bootloop) but at the same time xld ROM is easily installed
I have tried everything, formatting data ,cache in Mount and storage, cleared dalvik and partition
So pls guide me a solution
Thanks
Hi,
I flashed new ROM for m phone with TWRP but when i reboot, it's again TWRP recovery. Android do not start.
I have fastboot access, i can flash the recovery, i can flash another ROM but every time, the phone only reboot to TWRP recovery.
If someone have an idea to resolve my problem.
Thx
ghicat said:
Hi,
I flashed new ROM for m phone with TWRP but when i reboot, it's again TWRP recovery. Android do not start.
I have fastboot access, i can flash the recovery, i can flash another ROM but every time, the phone only reboot to TWRP recovery.
If someone have an idea to resolve my problem.
Thx
Click to expand...
Click to collapse
Hello,
Please tell us the make and model of your device?
Regards
Vatsal,
Forum Moderator.
i rooted my android and installed succesfully custom recovery twrp zip through flashify
and then tried to install custom rom but my device is now damaged totally, its is now getting on/off on its own and device is not starting only screen with lenovo androis is seen
plz help, if i can fix it
THANK YOU in advance