Endomondo problems - Samsung Gear S3

After updating my Gear S3 to Tizen 3.0 I haven´t been able to get my Endomondo app on my watch to save or sync my workouts. I´ve got the latest app versions on both my phone and watch and have tried uninstalling and installing again with no luck. I suppose it has got something to do with the Tizen update as there were no problems before the update.
Anyone got a workaround for this problem?

Same here...and also there was an update few days ago. But it did not solve the issue.
Have you written to endomondo team about it?

moffe said:
Same here...and also there was an update few days ago. But it did not solve the issue.
Have you written to endomondo team about it?
Click to expand...
Click to collapse
Yeah, but no answer yet

This morning I tried Uninstalling and then installing the Endomondo app on both my S7 and Gear S3 and now there are no problems saving my workouts.
Endomondo support wrote to me that there are several users having troubles saving workouts and that they have contacted Samsung about this problem.

I removed Endomondo from my Gear S3 and added it again...it seems to be working now.

I followed your guys, reinstall and it works now !!!.

I've just tried Endomondo on my Gear S3 to record a kayaking activity. It worked, but the battery drained so fast from 98% to 15% for 4 hours. I must stop Endomondo in S3 to save battery, since I still had a few hours in the activity. It could only record half of the trip impractically. Wifi and bluetooth had been switch off previously, and audio alert of the app was disabled. The outdoor screen brightness was forced to 8 by this app in S3 that couldn't be decreased during the activity to save battery power.
I dare not to use this app for my outdoor activity again such as hiking and kayaking, unless there's another workaround to let me use it to record a trip for about 6 to 8.5 hours.

Related

Watchmaker (App) Issues

Hey guys,
So I recently downloaded the new Watchmaker app that was released for Tizen (finally), but I'm running into some issues and was wondering if you guys were experiencing the same problems or have any fixes.
The problems are basically to do with the sensors.. So for all of the watch faces, my steps are showing as 0, the weather is showing as default (something like 6 degrees with 95% POP), and heart rate doesn't update as it should. For the heart rate, if I reload the watch face, it updates with the newest heart rate (I think), but the steps and weather are stuck at default (0 for steps).
Mostly everything else works (battery, stop watch, time, etc...), but for some reason the steps and weather won't update. I have checked to see that the scripts were correct..
For heart rate it's {shr}, for steps it's {ssc}, weather is {wtd}.
So, anyone experiencing these issues or have any fixes? I'm definitely out of ideas.
Thanks
Wait for an update. It's still new and buggy for now.
Sensors don't work reliably for me either, it's an app issue as noted, steps are way off.
Sent from my SM-G935V using Tapatalk
There's an update due out this week to fix these issues.
Lakota said:
There's an update due out this week to fix these issues.
Click to expand...
Click to collapse
Where did you see that...I'm running the newest beta of the watch WM app, and steps still don't work.
Sent from my SM-G935V using Tapatalk
I read something about it over on the developers Google+ page.
It mentioned being updated and submitted to Google for approval so should be due about Wednesday.
Lakota said:
I read something about it over on the developers Google+ page.
It mentioned being updated and submitted to Google for approval so should be due about Wednesday.
Click to expand...
Click to collapse
Thanks, I hang out over there and all I've seen from Alex Curran (WM team) on things addressed in updates is below, which doesn't include a fix for reading sensors/getting accurate step data. However (some good news here) Alex did said today in a post on G+ that Tizen 3.0 (not released yet) will provide access to the watch sensors from native Tizen 3rd party apps. For some reason (known only so Samsung), currently only web apps (like the Facer app) have access to the step sensor, and WM (being a native Tizen app) can't access the watch's step sensor (at least not until Tizen 3.0 is released).
So hopefully Samsung will release Tizen 3.0 soon!
WM watch up stuff in progress...Have you seen anything else?
Two days ago, from Alex:
New Samsung Gear Companion App in Beta :
http://androidslide.com/watchmaker_tizen.tpk
- Fix for spaces in curved text
- Fix for some watchfaces showing black in AOD
- Fix for incorrect vibrations
Four days ago from Alex:
New Samsung Gear Companion App in Beta :
- Support for Tizen-based tap actions on watch, e.g. launch Alarm, S Health, etc
- Weekdays / month names localized to correct language
- Fixed {awname}
Watchmaker doesn't seem to like custom roms on rooted Samsung devices (KLTEDV with custom Nougat rom). I can get it on the phone but when trying to install the companion app to the watch (Gear S3) the phone crashes. All my other companion apps install without issue from phone to watch, it's just Watchmaker that doesn't want to play the game? Yes I do know that I can always go back to a stock rom but it just seems a bit unusual that this app is the odd one out amongst the rest?
I was able to install Watchmaker on my Gear S2 with a Samsung Note 3 on custom Kitkat rom (SlimROM). My issues so far are that I can't update the app on the Gear S2 (even though it states "installed" in the notification, I only see the installation icon looping indefinitely on the Gear Store on my phone) and Watchmaker can't update weather status anymore...
I'm having similar issues with my Gear S3 and Watchmaker.
I can build faces and scripts that run and update great in the app, but then don't function properly once loaded on the S3.
Examples: Temperature units are always displayed as C regardless of setting in both app and watch.
Temps and weather info don't udate on the watch. They just display whatever value they had when I pushed the face from my phone to the S3.
Timezone handling is off, even on my phone. Trying to set something as simple as UTC is horrific. And having a clock that displays the time at home when I'm traveling doesn't work no matter how I've defined the time zones. Very frustrating.
Ok...most of my issues seem to be resolved now. One problem was my phone somehow got stuck in a manual time zone mode. Fixed now. Took a couple of sending the eatch face to my watch but suddenly started displaying other timezones properly.
Ditto for weather status.
Only remaining problem was temps are still in Celcius, but some trivial math worked around that.
Sent from my SM-N910T3 using XDA-Developers Legacy app
My watch maker can't seem to find my gear s3. even after i reboot and do all the suggestions.
Hello guys! I've changed my smartphone and I've re-installed watchmaker, and now, I can't find a way to make the phone's battery level more frequent refresh.. I don't remember.. Thanks
WM S3 gear step counter
Dear friends,
WM obviously can not show steps from gear S3, using the sensor built in. Nevertheless there is a workaround using data from S-Health app. Now my question : step value on my gear shows 9012 steps, counter on s-health app shows equal value of 9012 steps,
but on watchface from WM it shows 14827 steps. Using {ssc} command for this value.
Does anybody has an idea where this value comes from, or how to setup that both values are equal.
By the way, setting for
Settings: Watch
Steps source for Gear S2/S3 (Samsung Health on Phone (Strategy 1)
Thanks for support
Peter
peter_mars said:
Dear friends,
WM obviously can not show steps from gear S3, using the sensor built in. Nevertheless there is a workaround using data from S-Health app. Now my question : step value on my gear shows 9012 steps, counter on s-health app shows equal value of 9012 steps,
but on watchface from WM it shows 14827 steps. Using {ssc} command for this value.
Does anybody has an idea where this value comes from, or how to setup that both values are equal.
By the way, setting for
Settings: Watch
Steps source for Gear S2/S3 (Samsung Health on Phone (Strategy 1)
Thanks for support
Peter
Click to expand...
Click to collapse
It's the S-Health app on your phone since it's showing your combined steps from both phone and S3. I tried changing this in the S-Health app to stop counting steps on the phone and that did work, but now it seems to have stopped the S-Health auto-sync of getting the steps from the S3. When I launch the S-Health app on my phone, then it syncs them. I tried changing it back to combined and turned the phones step count back on to try and get auto-sync back, but it didn't fix it. Anyway, I'm now stuck with no autosync of steps from the S3 for my troubles.
If you want to try this as your, pardon the pun, mileage may vary, here we go, but note that this could put you in the same no auto-sync between S-Health and the S3 situation that I'm in now.
Open the S-Health app on your phone, select Steps to get to the steps main screen, select the hamburger menu and then select View your Step Count Data, select the mobile phone, now select the hamburger menu and you'll see how to stop the phone from counting steps. Then select the hamburger menu and select View your Step Count Data and set it to the S3 or All Steps since it's the phones S-Health step count is disabled.
Sent from my SM-T800 using XDA-Developers Legacy app
Sad... since this thread started.. this app STILL has problems..for me at least
I had a similar problem with the steps recorded by phone and gear. After I managed to filter only the steps from gear (in a custom app) I found out that the synchronization between the phone and gear is very bad. Even the steps count changes in the gear, the SHealth on my phone still displays the old value. If I disconnect and reconnect the gear it updates the value. Not reliable for a company app.
Thoughts?
Can't install companion app on Gear S3
Strange
I have Watchmaker on my Galaxy S8+ but when I try to install the companion app on my Gear S3 I receive an error msg saying that this app is not available any longer for purchase, or that it's not supported in my country or device.
I purchased the full version and have it installed on my phone.
please advise how to install .tpk in gear s3 frontier?
please advise how to install .tpk in gear s3 frontier?
farooqrehmani said:
please advise how to install .tpk in gear s3 frontier?
Click to expand...
Click to collapse
Use SDB (Smart Development Bridge) from your computer to install the tpk file.
1) To use the SDB in a target device, set the device to the SDB mode by going to Settings > More system settings > Developer options > USB debugging in the device menu.
2) Turn on wifi (not auto) on your watch and make sure the watch is connected to the same wifi as your pc.
3) Use sdb connect and sdb install commands to perform the install. More details about SDB here: https://developer.tizen.org/dev-guide/2.4/org.tizen.devtools/html/common_tools/smart_dev_bridge.htm

New Gear S3 Frontier - Some questions (Apps and Wakelocks)

Hello,
I bought a Gear S3 Frontier a few days ago and I really like this Smartwatch.
But I have some questions regarding the apps I need.
So there are 2 apps I installed besides Gear app:
- Gear S Plugin
- Samsung Accessory Service
What are these apps for? Do I need all of them?
Another problem I have is my terrible battery life since I installed these apps (+ S Health).
My phone never goes to deep sleep, it's always awake.
I think it's because of the S Health app.
I installed BetterBatteryStats to analyse this problem, but I have to wait a day for good results.
Any ideas what is the problem and how I can fix this?
Thanks!
by using Samsung phone ?

S Health and Gear 3

So I used to use Under Amour Record on the watch and phone for tracking workouts. I would put on an external HRM and then start the app on the phone and do my Crossfit workout. Once done I would stop the work out on the phone an then after awhile the app would update on the watch. I ditched it thinking I could accomplish the same thing with S Health
So I went into Shealth and pair my external HRM to the app. I started a circuit training session ( since they dont have a Crossfit Workout ) for about 1.5 hours. Took the Gear 3 off and went out my workout. Got done and stopped the workout on my Google Pixel S Health App and it tracked decent. But I do not see the workout on my watch. Does the software on the phone not talk to the software on the app? I know the watch will sync workouts to the app on the phone and steps sleep etc, but does the phone not speak to the watch?
Also on the app on the phone how do you see your all day calorie burn??
I am a newb so maybe I am missing something
Any help would be appreciated
You can just transfer your workouts from gear to shealth, not from shealth to gear.
Sent from my HTC 10 using XDA Labs

No notifications

Since I updated my Pixel to Android 8.0 Oreo about a month ago, I don't get any notifications any more. The only thing that seems to be working is phone calls which I can see on my gear.
What I've tried to do, to solve it:
- Cleared data for the Gear app
- Uninstalled and reinstalled all Samsung applications
- Factory reset the Gear
- Checked that the Gear app has permission to notifications
- Checked that the Gear has the latest firmware
- Rebooted my Pixel
- Tried to connect my Gear S3 to a Huawei phone running Android 7.0 (notifications worked)
- Contacted Google that said the issue probably is because the Samsung app doesn't support Oreo
- Contacted Samsung that said Google is "probaby right" and I'll have to wait for an firmware update for the Gear which they have no ETA for?
If Google is right, everyone with Oreo should have this problem? Or atleast someone else? Is that the case?
I have Oreo beta on my Nokia 8 and have no problems which weren't present on nougat.
No issues with notifications.
Sent from my TA-1012 using XDA-Developers Legacy app
Ok, does anyone else have any idea of what can be the issue for me?
I'm having the same issue. Also with my pixel. Tried everything you have also done. Almost at the stage I'm about to switch back to my old moto 360 until they release a patch. Not being able to receive any type of notification is a deal breaker for me.
have you tried to clean cache, stop the Bluetooth process on pixel and run it again?
Anybody got solution for this?
I upgraded OnePlus 3 to Oreo and notifications stopped showing on Gear.
Soon afterwards I upgraded Gear to Tizen 3 but that didi't solve problem.
The new software update that was released a few days ago solved the issue for me.
Exactly the same problems and frustrations
In short, have tried all the same actions as set out by yourself. No Gear 3 notifications started with Pixel upgrade to Android 8.0. Like others have stated here, makes wearing and relying on Gear watch very marginal. I bought Gear watch to pickup notifications when doing outdoors, relatively hands free sporting activities.
Everyone: please keep THIS discussion thread alive in search of eventual solution. Thanks. John, Sydney Australia
Same issues
I recently purchased a gear s3 Frontier watch, after much researching, it was the one that most fit my wants.
It is paired with my Pixel phone and for the first 3 or 4 days it worked great but now I don't receive any notifications at all except for Samsung Health... Notifications are all turned on but nothing comes through?
It seemed to have started with the Tizen 3.0 update. But could't say if it was immediately after or a day or two later. I've done multiple resets but nada.
Phone calls do come through to the watch but my phone doesn't ring anymore when the watch is connected..
No settings were changed on the watch or the phone app.. One day it worked fine, the next day, everything quit...
This is very disappointing... these notifications were the reason I wanted a smart watch in the first place.
Any idea whats going on?
The watch is SM-R760 running Tizen 3.0.0.1 version R760XXU2CQL1
Knox 2.2.0
Know Tizen 2.2.0
SE for Tizen 1.0.0
TIMA 3.0.0
Pixel Phone on Android 8.1.0
Snapdragon S8 on nougat with a similar problem. My notifications will disable themselves and the switch to turn them back on will be grayed out and unselectable. Only way to get them to work again is by rebooting the watch and the phone, but it will only work for a few hours until it's broken again.
I have a similar problem with my Oneplus 3.
Evertyhing worked fine until I updated my phone to OxygenOS 5.0.3 Android 8.0.0. Since then the Gear S3 doesn't receive any notification. The only one are phone calls.
The settings for notifications are on (in the Gear App and OS settings unchanged). Resetting the watch didn't change anything. Round about 2 times a day the gear looses the bluetooth connection for ~30 seconds which is new as well.
Resetting the phone is no option.
Any ideas or new information about this problem?
nouseeme said:
I have a similar problem with my Oneplus 3.
Evertyhing worked fine until I updated my phone to OxygenOS 5.0.3 Android 8.0.0. Since then the Gear S3 doesn't receive any notification. The only one are phone calls.
The settings for notifications are on (in the Gear App and OS settings unchanged). Resetting the watch didn't change anything. Round about 2 times a day the gear looses the bluetooth connection for ~30 seconds which is new as well.
Resetting the phone is no option.
Any ideas or new information about this problem?
Click to expand...
Click to collapse
I reinstalled the Gear app, repaired and resetted the watch which didn't change anything.
Though I forget about the Samsung Accessory Service app. After reinstalling this, rebooting the phone and repairing the watch the notifitications are working again.
In the matter of connection loss I can't tell not yet.
nouseeme said:
I reinstalled the Gear app, repaired and resetted the watch which didn't change anything.
Though I forget about the Samsung Accessory Service app. After reinstalling this, rebooting the phone and repairing the watch the notifitications are working again.
In the matter of connection loss I can't tell not yet.
Click to expand...
Click to collapse
I know this is an old thread, but I stopped getting notifications on my Oneplus 7 Pro - Android 10. I had to turn off battery optimization for the three Samsung apps - Galaxy Wear, Gear Plug in and Samsung Accessory Service. I now have notifications back.

Question Galaxy watch 4 classic 46mm gps not working

Hi guys, after update watch to one UI 4.5 on last September, gps can't find location on Samsung health, Strava and same apps. Yesterday I updated watch to October update, but problem not solved. Can anyone help me?
yasador said:
Hi guys, after update watch to one UI 4.5 on last September, gps can't find location on Samsung health, Strava and same apps. Yesterday I updated watch to October update, but problem not solved. Can anyone help me?
Click to expand...
Click to collapse
There is an entire thread about this here https://forum.xda-developers.com/t/gps-issues.4417711/page-2#post-87552393
I did not had the time yet to check if enabling location in auto detect mode sorted the issue.
Thanks for guidance. I did but the problem is not solved.
Did not work.
Also check this out (and the comments)
"If you open the workout widget on the watch and choose your workout from there instead of just selecting the run widget, you can see at the top of the screen that GPS and Heartrate are blinking. When they both are solid and you see your heart rate you are ready to press run or walk, etc. That way you know everything is locked in before you start your workout."
The problem is with the internal gps connection of the watch
The Google Fit app uses the phone's GPS
Few people have noticed this problem and Samsung has cleverly avoided fixing it
Has anyone been able to solve the problem?????????
admiral_v said:
The problem is with the internal gps connection of the watch
The Google Fit app uses the phone's GPS
Few people have noticed this problem and Samsung has cleverly avoided fixing it
Has anyone been able to solve the problem?????????
Click to expand...
Click to collapse
Maybe in your watch, my GPS still works fine.
I don't use Google Fit and I don't exercise/hike with my phone - just the GW4 Classic 42mm.
GPS works fine and tracks/routes are recorded fine (within accuracy of the receiver).
Only existing issue is that auto-detection of exercise (walk/run/cycle) works but does not initiate GPS route recording; you need to start the exercise manually to have route recorded.
Weird, but worked for me>>>
removed original straps from watch
cleaned watch dial
powered off and heated up with hair dryer
powered on in outdoor
and voila!! GPS fixed. i have tracked cycling, running working fine now!
also i have changed straps locations (means, swapped upper and bottom straps)
🫰

Categories

Resources