So I made the jump to Tizen 3. Unfortunately all of my GWD faces still show up on the device, they wont launch. I figured I would just reload them in GWD...... Yeah.... NO....
I decided to update to GWD 1.5.0 to see if that made any difference and.... nope.
I reset the watch to start from scratch and STILL nope. I continue to get a Warning in GWD, at the very end says "key[end]val[fail]processing result: Check certificate error[-12] failedspend time for pkgcmd is[1890]ms"
I'm no genius, but I read, certificate error(?) The watch is connecting to my network wifi just fine, and in GWD too, just no bueno!
Anyone else?
MAYBE a resolution? Going to check it out.
http://developer.samsung.com/forum/...ame=SDK&startId=zzzzz~&searchSubId=0000000042
Edit***
Confirmed that updating to GWD 1.5.0, loading your watchface and hit F10(rebuild) works.
PHEW
kangi26 said:
MAYBE a resolution? Going to check it out.
http://developer.samsung.com/forum/...ame=SDK&startId=zzzzz~&searchSubId=0000000042
Edit***
Confirmed that updating to GWD 1.5.0, loading your watchface and hit F10(rebuild) works.
PHEW
Click to expand...
Click to collapse
Thanks for the find and solution!
http://developer.samsung.com/forum/thread/gwd-151/201/332707?boardName=SDK&startId=zzzzz~
Seems 1.5.1 announced...
Best Regards
adfree said:
http://developer.samsung.com/forum/thread/gwd-151/201/332707?boardName=SDK&startId=zzzzz~
Seems 1.5.1 announced...
Best Regards
Click to expand...
Click to collapse
They said it was going to come fast, and ..... it did. Thanks
Doesn't seem to have resolved my issue where a GWD watch face defaults back to a standard one within minutes
Using 1.5.1
Sent from my SM-G935F using Tapatalk
WelshBoa said:
Doesn't seem to have resolved my issue where a GWD watch face defaults back to a standard one within minutes
Using 1.5.1
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Are you talking on the Watch itself? If so, just as you load the watch face in GWD, hit F10, it'll "build" the face again, then reconnect to your watch and push it again. You'll have to re-save the tpk
kangi26 said:
Are you talking on the Watch itself? If so, just as you load the watch face in GWD, hit F10, it'll "build" the face again, then reconnect to your watch and push it again. You'll have to re-save the tpk
Click to expand...
Click to collapse
Ah ok yes did see the f10 instruction but perhaps didn't press it at correct moment
Will try again
Thanks
Sent from my SM-G935F using Tapatalk
WelshBoa said:
Ah ok yes did see the f10 instruction but perhaps didn't press it at correct moment
Will try again
Thanks
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
It keeps saying now the OPR rate is over 15% which it didn't before
Sent from my SM-G935F using Tapatalk
Sorry got it to save properly now but still it disappears off gear as soon as screen times out.
Does tizen 3.0 backup my custom watchface also?? Because when I backup...it's only shows 250kb as its size.
In 2.3.2.3 it used to backup my custom watchface I installed from s3 gear watch designer too.
Related
I know it seems rather trivial, but is there someone working on root access for the gear s2? I'd love custom ringtones like on my gear s.
It can be done without rooting your device. Unfortunately, I don't have a 3g S2 to test it :-/
if you have a method, I'd be more than willing to test and get back to you . Tired of the boring stock tones lol
Actually I'm working on one, and it's very close to release
I can help test with a 3G version as well.
paoloroeseke said:
if you have a method, I'd be more than willing to test and get back to you . Tired of the boring stock tones lol
Click to expand...
Click to collapse
rgburress said:
I can help test with a 3G version as well.
Click to expand...
Click to collapse
Thanks! Currently, I'm having troubles with installing the file on a tester watch other than my own. The steps are rather complicated and difficult due to Samsung's strict policy about distributing apps outside the store. Once the problem is solved, I will let you know. :fingers-crossed:
Thanks! I have sdb setup on my computer at home, and the ability to install sideloaded wgt files if that helps
paoloroeseke said:
Thanks! I have sdb setup on my computer at home, and the ability to install sideloaded wgt files if that helps
Click to expand...
Click to collapse
The problem now is that even if I signed the wgt file with the tester's watch id, it still refuses to install. I'm trying to solve it before I invite more people to test
I also have a 3G version, will be willing to test out. Really sounds dumb, but i want to have custom ringtones, i bought the Filemaster app for $3, it shows you root access. but will not let you transfer to that folder.
Unless someone has a way to do that.
Let me know if you need any testing.
Ok guys any news on rooting this baby?
tipztv said:
The problem now is that even if I signed the wgt file with the tester's watch id, it still refuses to install. I'm trying to solve it before I invite more people to test
Click to expand...
Click to collapse
With root access, is one able to modify system settings like on Android phones (like buildprop tweaks)?
I'm specifically looking for ways to fix the buggy always-on mode still turning off the display & to change the screen timeout.
But if one modifies the watch, will OTA updates still work?
And is there an Odin-like program for the Gear S2?
Sent from my SM-G925P using Tapatalk
optimummind said:
With root access, is one able to modify system settings like on Android phones (like buildprop tweaks)?
I'm specifically looking for ways to fix the buggy always-on mode still turning off the display & to change the screen timeout.
But if one modifies the watch, will OTA updates still work?
And is there an Odin-like program for the Gear S2?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Sorry but I'm not familiar with this topic. I haven't messed with the Tizen system before. However, I'm sure that the Odin-like app for the S2 doesn't exist
The custom ringtone app is now available for 3g users. Let me know what you think about it
tipztv said:
The custom ringtone app is now available for 3g users. Let me know what you think about it
Click to expand...
Click to collapse
Do we just download from the app store?
paoloroeseke said:
Do we just download from the app store?
Click to expand...
Click to collapse
Yes, it's in the gear app store
Sent from my iPhone using Tapatalk
Damn, just found this thread and read through it. Haven't looked at Tizen development yet, but am well-experienced developing for Android.
@tipztv, what you mention about deployment is very troubling! How does this issue affect private app development and deployment on one's own watch? I have all kinds of little apps I've developed over the years just for myself to plug functionality holes or just make something easier to do on the phone. Of course, with Android, it's trivial to do this. How about on Tizen?
No news about the root ?
Was root never achieved?
Everything is ready but I'm stuck scratching my head on the final step of opening the "Oculus App" and downloading the games. Where is the app? Is the the Gear VR Service and automatically launches when I connect it to the Oculus? Any help from those that have completed the process would be appreciated. Thanks in advance!
KCRic said:
Everything is ready but I'm stuck scratching my head on the final step of opening the "Oculus App" and downloading the games. Where is the app? Is the the Gear VR Service and automatically launches when I connect it to the Oculus? Any help from those that have completed the process would be appreciated. Thanks in advance!
Click to expand...
Click to collapse
When you plug it in it should say something like please install blah blah blah the when you unplug it it should pop up what is needed
Sent from my SM-G930T using Tapatalk
You finally got ur gear vr through samsung?
Quick shortcut maker (play store)
You can see the setup wizard with in. Make a shortcut to your home screen and run it. Profit!
I received my gear vr as well today. It's a unique experience.
Sent from my SM-G930T using Tapatalk
OMG this VR is so cool! My kid is rolling around the room cooing, lol. FUN
*edit*
Pretty sure I'm going blind now......
Sent from my SM-G930T using XDA-Developers mobile app
Thanks for the help everyone. I have my notifications off for the XDA app and didn't know you responded. Just a side question: is anyone having an issue with notifications playing sound despite being on vibrate? It seems to be fairly random but I thought maybe there's a setting I'm missing?
People,
Those apps are now available in iOS app store!
Samsung Gear Fit By Samsung Electronics CO.LTD.
Samsung Gear S By Samsung Electronics CO.LTD.
Go get them
nothing change from the beta
cerlixda said:
nothing change from the beta
Click to expand...
Click to collapse
I never had the beta. I was too late to register.
However, there are a lot of UI changes when compared with the leaked 1.5 version. ?
And the Bluetooth app installations in the watch are possessed much faster, although they are still slow as hell.
All I see is the Gear Fit app anything on the S2?
Sent from my iPhone using Tapatalk
JohnnyCarlos said:
I never had the beta. I was too late to register.
However, there are a lot of UI changes when compared with the leaked 1.5 version.
And the Bluetooth app installations in the watch are possessed much faster, although they are still slow as hell.
Click to expand...
Click to collapse
I was hoping to be able to call, navigate and answer to text messages but as the leak version there isn't those functions
CoachCorrieMac said:
All I see is the Gear Fit app anything on the S2?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes... Here
https://appsto.re/it/R6mMcb.i
YES - in app store there is the old beta. UNFORTUNATELY the app has the same error that the last beta had (I have reported 3 weeks ago to the developers): when you call in S Health a training with recorded route the app hangs/crashes.
The same thing happens with other users or only with my iPhone SE?
ThinkD said:
YES - in app store there is the old beta. UNFORTUNATELY the app has the same error that the last beta had (I have reported 3 weeks ago to the developers): when you call in S Health a training with recorded route the app hangs/crashes.
The same thing happens with other users or only with my iPhone SE?
Click to expand...
Click to collapse
i had installed on iphone 6 plus IOS 10.2
but as I said, unfortunateley, same that nothing is changed. only read whatsapp/sms, whatsapp no pictures, no contacts, no calls, no maps....
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
MokonaW said:
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
Click to expand...
Click to collapse
I only reseted the watch. Nothing else.
Basically I installed the official version, and reseted the watch. Only then I uninstalled the leaked version. But there was a few minutes with both the official and the leaked versions installed and everything was working as it is now.
Ah, and I didn't make the phone forget the watch in the Bluetooth settings. Just left it there.
JohnnyCarlos said:
Yes... Here
https://appsto.re/it/R6mMcb.i
Click to expand...
Click to collapse
Awesome thanks! It works for both my wife's and my watch! Funny thing is we had been Samsung galaxy people for 7+ years and just switched to an iPhone two days ago. I run a business and the Samsung just couldn't hang with me and my business. I was extremely bombed because I loved my watch and so did my wife and thought we were going to have to go purchase Apple Watch is. But this saves me! Thanks
Sent from my iPhone using Tapatalk
MokonaW said:
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
Click to expand...
Click to collapse
i have this firmware R732XXU2EPK5 and i dowloaded official app that have 1.6.16121402
i follow the steps like you explained but i'm in the same situation: it connect on the app but the watch don't have sms, maps, contact icons, and can only read notification and no for example answer a whatsappa/sms message, no see the contacts.
firstly... are you able to do all those that i'cant do?
if yes can you tell me which firmware i have to install ?
CoachCorrieMac said:
Awesome thanks! It works for both my wife's and my watch! Funny thing is we had been Samsung galaxy people for 7+ years and just switched to an iPhone two days ago. I run a business and the Samsung just couldn't hang with me and my business. I was extremely bombed because I loved my watch and so did my wife and thought we were going to have to go purchase Apple Watch is. But this saves me! Thanks
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
What's the name of the app?
Only see Gear fit manager in the app store.
Gijsph said:
What's the name of the app?
Only see Gear fit manager in the app store.
Click to expand...
Click to collapse
Quote:
Originally Posted by JohnnyCarlos
Yes... Here
https://appsto.re/it/R6mMcb.i
cerlixda said:
Quote:
Originally Posted by JohnnyCarlos
Yes... Here
https://appsto.re/it/R6mMcb.i
Click to expand...
Click to collapse
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Gijsph said:
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Click to expand...
Click to collapse
for some reason the app don't appear in the app store. the only way is open "the strange link" view app in itunes and install the app from itunes.
Gijsph said:
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Click to expand...
Click to collapse
Try going to the Samsung Gear Ft app and click on the Samsung Electronics name. You should see Samsung Gear S app in there.
cerlixda said:
i have this firmware R732XXU2EPK5 and i dowloaded official app that have 1.6.16121402
i follow the steps like you explained but i'm in the same situation: it connect on the app but the watch don't have sms, maps, contact icons, and can only read notification and no for example answer a whatsappa/sms message, no see the contacts.
firstly... are you able to do all those that i'cant do?
if yes can you tell me which firmware i have to install ?
Click to expand...
Click to collapse
can someone help me please?
cerlixda said:
can someone help me please?
Click to expand...
Click to collapse
The watches, that works with iPhone dont have text messeges and cant reply. No contacts too..hope,maybe, in future it will be, but I dont believe in it)) sorry for my English)
Valerievna said:
The watches, that works with iPhone dont have text messeges and cant reply. No contacts too..hope,maybe, in future it will be, but I dont believe in it)) sorry for my English)
Click to expand...
Click to collapse
ah, so i wasted my time all the day when all iphone users aren't able to do those things... so i don't understand whi other users said "work charme" for me, if with this situation could use only half device...
thanks and no problem for the english. my is too bad than yours
Is there a group or elsewhere on the Web, where it is possible to download finished projects from "Gear Watch Designer"?
*.gwd files
stonefox said:
Is there a group or elsewhere on the Web, where it is possible to download finished projects from "Gear Watch Designer"?
*.gwd files
Click to expand...
Click to collapse
Yes, Check Here.
JazonX said:
Yes, Check Here.
Click to expand...
Click to collapse
wow...some amazing watch faces on display there. Thanks!
How should i copy thesei gwd file to my watch?
Ankit-dba said:
How should i copy thesei gwd file to my watch?
Click to expand...
Click to collapse
You would use Gear Watch Designer to build the project from the downloaded gwd file then use GWD to push it to your phone.
Tel864 said:
You would use Gear Watch Designer to build the project from the downloaded gwd file then use GWD to push it to your phone.
Click to expand...
Click to collapse
Thanks. I tried that but when i select to show on device it shows for few seconds on my s3 but didn't get copied on it for permanently.
Ankit-dba said:
Thanks. I tried that but when i select to show on device it shows for few seconds on my s3 but didn't get copied on it for permanently.
Click to expand...
Click to collapse
Odd, and you do have debugging on?
Tel864 said:
Odd, and you do have debugging on?
Click to expand...
Click to collapse
Yes i have.
It's Easy,
For those who have trouble - Follow this guide.
Mine only displays for a couple seconds too.
But, it still installs the face on the watch, it just doesn't set it as the current face. I just switch faces and it is there.
Thanks @JazonX it is working now. For some face is i am getting error 'pixel ratio of always on state is high' it is around 21% even if turn off AOM. How can i reduce it.
Ankit-dba said:
Thanks @JazonX it is working now. For some face is i am getting error 'pixel ratio of always on state is high' it is around 21% even if turn off AOM. How can i reduce it.
Click to expand...
Click to collapse
You can try going to the top right corner of GWD and select always on, high color, and then reduce the opacity of the background image.
OR, switch back to GWD 1.2.1 which doesn't have this restriction. Very annoying - many are asking on the Samsung forums to eliminate it in future releases.
arl16 said:
You can try going to the top right corner of GWD and select always on, high color, and then reduce the opacity of the background image.
OR, switch back to GWD 1.2.1 which doesn't have this restriction. Very annoying - many are asking on the Samsung forums to eliminate it in future releases.
Click to expand...
Click to collapse
I can understand why samsung is doing this as they don't want any watch faces released in the their store to negatively affect the battery life, but for tinkerers like us wanting to make 'banned' watchfaces...not great.
Instead..they should tag the tpk file created with ratio set too high..so when submitted..it gets auto rejected from Samsung side.
aarick said:
I can understand why samsung is doing this as they don't want any watch faces released in the their store to negatively affect the battery life, but for tinkerers like us wanting to make 'banned' watchfaces...not great.
Instead..they should tag the tpk file created with ratio set too high..so when submitted..it gets auto rejected from Samsung side.
Click to expand...
Click to collapse
Agreed - 100%. Exactly my comment to them!
http://developer.samsung.com/forum/board/thread/view.do?boardName=SDK&messageId=301329&topCtgy=03
a nice link to download goods faces
thank you :good:
Easy fix
Ankit-dba said:
Thanks @JazonX it is working now. For some face is i am getting error 'pixel ratio of always on state is high' it is around 21% even if turn off AOM. How can i reduce it.
Click to expand...
Click to collapse
Please check the answer here
JazonX said:
Yes, Check Here.
Click to expand...
Click to collapse
Guys, you have maybe something more? Wathfaces from this link is very ****ty :cyclops:
QVA said:
Guys, you have maybe something more? Wathfaces from this link is very ****ty :cyclops:
Click to expand...
Click to collapse
Come to Watchland: watchland.ca/console/gwd/
There are thousands of GWD files All neatly organized and easy to search through!
They have really low quality and resolution (S3 frontier). Most of them don't have functional icons etc.
There's a similar thread https://forum.xda-developers.com/gear-s3/themes/watch-gear-watch-designer-t3509588
This site has TONS https://www.watchfaces.be/resources/
Sorry if this is the wrong thread, couldn't find a post similar searching on mobile.
I'd really like this watch face, does anyone know where I can find it please?
Many thanks in advance and as a new user of a smartwatch I've found this forum to be very useful
Looks like a Pujie template
https://play.google.com/store/apps/details?id=com.pujie.wristwear.pujieblack
http://www.pujiewear.com
https://facerepo.com/app/search/results/?query=pujie black&platform=android&page=1
Sign into Google/gmail, join here:
https://plus.google.com/communities/111188993026575572764
wozhere said:
Looks like a Pujie template
https://play.google.com/store/apps/details?id=com.pujie.wristwear.pujieblack
http://www.pujiewear.com
https://facerepo.com/app/search/results/?query=pujie black&platform=android&page=1
Sign into Google/gmail, join here:
https://plus.google.com/communities/111188993026575572764
Click to expand...
Click to collapse
Thank you very much
MilgeS said:
Sorry if this is the wrong thread, couldn't find a post similar searching on mobile.
I'd really like this watch face, does anyone know where I can find it please?
Many thanks in advance and as a new user of a smartwatch I've found this forum to be very useful
Click to expand...
Click to collapse
Any joy with this yet mate? I've had a look and can't find the Elements Analog available for our Huawei Watch 2 Sport but I did find this:
https://play.google.com/store/apps/details?id=vg.maarten.adwatchface
It's very customisable and looks similar to yours (I'd like to be able to remove the borders of the complications however).
Let me know if you found yours though cos it really is a thing of beauty!
Close enough?
Lolpoppa said:
Close enough?
Click to expand...
Click to collapse
Looks really nice! I also found this link but can't suss out ADB
https://forum.xda-developers.com/android-wear/general/google-elements-watch-download-t3583455
Lolpoppa said:
Close enough?
Click to expand...
Click to collapse
I just bought this, lots of options with it https://play.google.com/store/apps/details?id=huskydev.android.watchface.blackclassic
Ultimate Watch 2 has lots of settings. I got the premium too within app on phone, $1. It's my top layer face, with others showing under & other apps on and linked around it. I try different faces every day though other than UW2
So, just to be a pain in the arse, has anyone got any idea where I can lay my hands on the below watch face please? Image is taken from Wear OS app and lots of reviews show this face on the Huawei Watch 2 Sport but also the GT.
Has it been pulled on an update maybe?
Anyone?
MilgeS said:
Sorry if this is the wrong thread, couldn't find a post similar searching on mobile.
I'd really like this watch face, does anyone know where I can find it please?
Many thanks in advance and as a new user of a smartwatch I've found this forum to be very useful
Click to expand...
Click to collapse
Actually that's my watchface and I found it pre-installed in my Huawei Watch 2. How come it's not on yours?
shishimaru1000 said:
Actually that's my watchface and I found it pre-installed in my Huawei Watch 2. How come it's not on yours?
Click to expand...
Click to collapse
I can only think it's a regional thing, some get it, some don't
Trying to get this as my watch face from my Honor note 10, does anyone have the background by any chance?
shishimaru1000 said:
Actually that's my watchface and I found it pre-installed in my Huawei Watch 2. How come it's not on yours?
Click to expand...
Click to collapse
Has anyone managed to obtain this clock face. as it does seem the newer 4g versions dont have it, although its all over their media. Id like this face too and update on obtaining it would be great.
Can it be installed as a standard clock face by dragging it on the watch disk at all.
ATB
Kash20011 said:
Has anyone managed to obtain this clock face. as it does seem the newer 4g versions dont have it, although its all over their media. Id like this face too and update on obtaining it would be great.
Can it be installed as a standard clock face by dragging it on the watch disk at all.
ATB
Click to expand...
Click to collapse
I just bought a LEO-DLXX last month and the clock face comes standard. The bottom of the box does say 05/2019, but I'm not sure if that is the manufacture date. Also, there are two ways to install a watch face:
1) Installing through an app, such as WatchMaker, from your phone
2) Manually install via ADB but the watch face has to be an apk file
The watch face you're looking for you can be found on FacePro. You would have to download the watch face on your phone, then install WatchMaker on your phone, and use the app to import the watch face and install it on your watch.
I also made a pull of the stock watch faces stored in /system/priv-app/HwWatchface on my watch. You would install it via ADB with the following command:
Code:
adb install HwWatchface.apk
Please PM me for the file.