hello guys , id be grateful if anyone can help me .
im trying to fix my mother phone , the original problem was that the phone kept rebooting on the samsung galaxy j1 image . after reading on internet , i learned that i have to flash it , which i tried to do but failed . which put me on "the firmware upgrade encountered an issue " . after researching again , i found out i need to download a pit and twrp files , which fixed the problem . now it only boots in the twrp program .
so ive downoalded dozens of firmwares , but not even one seems to work ( the ones with the same firmware baseband fail on odin at .cache .img ) and the other ones fail at the start of system.img .
if anyone knows how to help id be very grateful
MS blades said:
hello guys , id be grateful if anyone can help me .
im trying to fix my mother phone , the original problem was that the phone kept rebooting on the samsung galaxy j1 image . after reading on internet , i learned that i have to flash it , which i tried to do but failed . which put me on "the firmware upgrade encountered an issue " . after researching again , i found out i need to download a pit and twrp files , which fixed the problem . now it only boots in the twrp program .
so ive downoalded dozens of firmwares , but not even one seems to work ( the ones with the same firmware baseband fail on odin at .cache .img ) and the other ones fail at the start of system.img .
if anyone knows how to help id be very grateful
Click to expand...
Click to collapse
anyone ?
MS blades said:
hello guys , id be grateful if anyone can help me .
im trying to fix my mother phone , the original problem was that the phone kept rebooting on the samsung galaxy j1 image . after reading on internet , i learned that i have to flash it , which i tried to do but failed . which put me on "the firmware upgrade encountered an issue " . after researching again , i found out i need to download a pit and twrp files , which fixed the problem . now it only boots in the twrp program .
so ive downoalded dozens of firmwares , but not even one seems to work ( the ones with the same firmware baseband fail on odin at .cache .img ) and the other ones fail at the start of system.img .
if anyone knows how to help id be very grateful
Click to expand...
Click to collapse
You Should have not flashed a pit file, it repartitons the phone and may lead to a Hard-Brick (thankfully it didn't)
i assume that you used a wrong pit file which missed up the partioning leading odin to not being able to flash the whole system, leaving you in the no os state.
but we are going to try to use a factory image frimware first
https://androidfilehost.com/?fid=24340319927534089
download this frimware then extract it
then flash ONLY and ONLY PDA file or maybe also be named as AP
if that didn't work a pit file maybe needed
-Hope- said:
You Should have not flashed a pit file, it repartitons the phone and may lead to a Hard-Brick (thankfully it didn't)
i assume that you used a wrong pit file which missed up the partioning leading odin to not being able to flash the whole system, leaving you in the no os state.
but we are going to try to use a factory image frimware first
download this frimware then extract it
then flash ONLY and ONLY PDA file or maybe also be named as AP
if that didn't work a pit file maybe needed
Click to expand...
Click to collapse
good evening , thank you so much for your help first of all
ive downloaded the file on the link you sent me and ive done just like you asked .
it passed on odin :
<ID:0/003> system.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
but it went directly to the firmware upgrade encountred an issue on the phone , does it mean is that this baseband isnt compatible with the phone ?
and since i couldnt in the begining access into the phone , ive only seen in the orginal recovery mode something like this ( ktu84p .j100fnxxuoaoc2 ) .
what can we do now ? and thank you very much again
MS blades said:
good evening , thank you so much for your help first of all
ive downloaded the file on the link you sent me and ive done just like you asked .
it passed on odin :
<ID:0/003> system.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
but it went directly to the firmware upgrade encountred an issue on the phone , does it mean is that this baseband isnt compatible with the phone ?
and since i couldnt in the begining access into the phone , ive only seen in the orginal recovery mode something like this ( ktu84p .j100fnxxuoaoc2 ) .
what can we do now ? and thank you very much again
Click to expand...
Click to collapse
what do u mean exactly ?
did the baseband change ?
is the sim detected ?
if you could capture what you have got too
https://drive.google.com/file/d/197pnfxR6wry52MadHBvkiBnABcKCKWFp/view?usp=drivesdk
-Hope- said:
what do u mean exactly ?
did the baseband change ?
is the sim detected ?
if you could capture what you have got too
Click to expand...
Click to collapse
no no , i just thought that i should tell you that this ktu84p .j100fnxxuoaoc2 )might be the original baseband.
and i dont really know how to verify if the sim i detected .
heres a picture of the phone after the flashing :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://drive.google.com/file/d/197pnfxR6wry52MadHBvkiBnABcKCKWFp/view?usp=drivesdk
MS blades said:
https://drive.google.com/file/d/197pnfxR6wry52MadHBvkiBnABcKCKWFp/view?usp=drivesdk
no no , i just thought that i should tell you that this ktu84p .j100fnxxuoaoc2 )might be the original baseband.
and i dont really know how to verify if the sim i detected .
heres a picture of the phone after the flashing :
Click to expand...
Click to collapse
Oh ok
use this guide to go through the problem
https://www.youtube.com/watch?v=LqoX7wNhotk
-Hope- said:
Oh ok
use this guide to go through the problem
https://www.youtube.com/watch?v=LqoX7wNhotk
Click to expand...
Click to collapse
Hey , i just tried it for the third time , it keeps failing at 95% .
is the phone broke totally ?
MS blades said:
Hey , i just tried it for the third time , it keeps failing at 95% .
is the phone broke totally ?
Click to expand...
Click to collapse
No I've faced the same problem
Try reflashing and boot
Then if it didn't
Reflash and flash twrp then
We may flash a custom ROM if you could boot it to twrp
-Hope- said:
No I've faced the same problem
Try reflashing and boot
Then if it didn't
Reflash and flash twrp then
We may flash a custom ROM if you could boot it to twrp
Click to expand...
Click to collapse
should i flash twrp without the pit file ?
because after the firmware upgrade encountred an issue , i always flash the pit file and twrp . it boots in the twrp .
i think we can try falshing a custom rom , because it boot sin twrp ?
MS blades said:
should i flash twrp without the pit file ?
because after the firmware upgrade encountred an issue , i always flash the pit file and twrp . it boots in the twrp .
i think we can try falshing a custom rom , because it boot sin twrp ?
Click to expand...
Click to collapse
Man,don't use pit files
Pit files are Dangerous and maybe kill your device
Flash WITHOUT pit files
-Hope- said:
Man,don't use pit files
Pit files are Dangerous and maybe kill your device
Flash WITHOUT pit files
Click to expand...
Click to collapse
oh okay thank you , i thought it was the only possible way.
i just flashed with only twrp , it booted in the twrp menu , after that i went in download mode , and tried kies again , it failed at 95% again .
MS blades said:
oh okay thank you , i thought it was the only possible way.
i just flashed with only twrp , it booted in the twrp menu , after that i went in download mode , and tried kies again , it failed at 95% again .
Click to expand...
Click to collapse
Try a reboot only
If that didn't work we can flash a custom rom
-Hope- said:
Try a reboot only
If that didn't work we can flash a custom recovery
Click to expand...
Click to collapse
a reboot from the twrp menu ?
MS blades said:
a reboot from the twrp menu ?
Click to expand...
Click to collapse
Yes
If that didn't work we can flash custom ROMs
I won't throw any device that boots
-Hope- said:
Yes
If that didn't work we can flash custom ROMs
I won't throw any device that boots
Click to expand...
Click to collapse
should i choose reboot system, recovery or power off ?
MS blades said:
should i choose reboot system, recovery or power off ?
Click to expand...
Click to collapse
System
-Hope- said:
System
Click to expand...
Click to collapse
it shows no os installed and then asks to install super su
MS blades said:
it shows no os installed and then asks to install super su
Click to expand...
Click to collapse
Use the ap file I provided and flash with Odin
Then flash twrp
And try to reboot from it
Don't use pit even experts don't deal with these
Related
Hi there! I will try to write about my problem as much as I can.
I'm on stock XWLA4 and CWM 4.0.0.2. I wanted to flash CWM 6.0.1.5 (and CM10 later) but when I push start in odin my laptop give me nice BSOD. Now my Android wont load. I see first screen with device name and later error - phone on the left, pc display on the right and yellow triangle betwen them. Under it a msg:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
I can go into Recovery Mode (4.0.0.2) but don't know if it will work good.
When I enter into Download Mode im pressing Continue (Volume up) and I see green Android with "Downloading..." msg under it and next msg under it "Do not turn off target !!" just like usb cable was still plug in(?) but msg on the top of screen tell me its waiting for usb cable.
I tried flash CWM again on my PC (leptop BSOD-ing me all the time in this one case) when I push Start its stuck at:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Click to expand...
Click to collapse
I read on web about one fix so I unplug usb cable and plug in, then it start to do smth and stuck at:
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
Click to expand...
Click to collapse
If I don't unplug and wait for long enought I get this:
<ID:0/003> Can't open the serial(COM) port.
Click to expand...
Click to collapse
Tried on few usb ports.
I was thinking at beginning about backup with current CWM but I think "Hey, its only CWM, not all rom", then BSOD from my laptop maybe ruin everything x). Hopefully I do a backup with current CWM version. Should I try flash CWM v6 via CWM? I saw version for that.
But guys, what can I do now?
Install kies in your system so that it will update the required drivers, Then flash the Stock ROM and after that you can flash CWM V4...
CM 10 can be flashed through CWM 4 also so no need to flash CWM V6...
Recently my phone also having similar problem.. upgrade from Stock 2.3.6 KK5 (with CWM 6.0.1.1) to latest Stock 4.0.4 XLP2.. then I wanted to load CWM..
so I downloaded 6.0.1.5.. stuck at the "<ID:0/005> Firmware update start... <ID:0/005> recovery.img..." for nearly 30 minutes nothing happened.. unplugged it..start again and "Please select recovery mode in Kies & try again" came out..
tried several files.. maybe my download was corrupted.. still having problem.. so I flash back stock ICS recovery via ODIN.. and tried CWM 6.0.1.1 and it works!!
I dont know why my phone could not install CWM 6.0.1.5
The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Sent from my CM10-powered GT-I9103
Adam77Root said:
The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Agree, I faced it too.Hey Adam the TWRP Mount Storage is also not working.
mj.vikram said:
Install kies in your system so that it will update the required drivers
Click to expand...
Click to collapse
Already done, in other case I could not connect my R to PC .
krobar77 said:
Recently my phone also having similar problem.. upgrade from Stock 2.3.6 KK5 (with CWM 6.0.1.1) to latest Stock 4.0.4 XLP2.. then I wanted to load CWM..
so I downloaded 6.0.1.5.. stuck at the "<ID:0/005> Firmware update start... <ID:0/005> recovery.img..." for nearly 30 minutes nothing happened.. unplugged it..start again and "Please select recovery mode in Kies & try again" came out..
tried several files.. maybe my download was corrupted.. still having problem.. so I flash back stock ICS recovery via ODIN.. and tried CWM 6.0.1.1 and it works!!
I dont know why my phone could not install CWM 6.0.1.5
Click to expand...
Click to collapse
Thx for the info . Could you provide the link to 6.0.1.1?
Adam77Root said:
The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Click to expand...
Click to collapse
By older version you mean 6.0.1.1 for example or 5.*?
Rejwen said:
Already done, in other case I could not connect my R to PC .
Thx for the info . Could you provide the link to 6.0.1.1?
By older version you mean 6.0.1.1 for example or 5.*?
Click to expand...
Click to collapse
You can find the link here -> http://forum.xda-developers.com/showthread.php?t=1839900
Yes older means 6.0.1.1 or below its Version.
kataria.vikesh said:
You can find the link here -> http://forum.xda-developers.com/showthread.php?t=1839900
Yes older means 6.0.1.1 or below its Version.
Click to expand...
Click to collapse
Yes, saw that topic but can't find 6.0.1.1 . Or I will just try v5.5.0.4 (is it also creating some "blobs" file during backup?)
And is there any reason to use Odin v3.07? Using v1.85 atm.
Rejwen said:
Yes, saw that topic but can't find 6.0.1.1 . Or I will just try v5.5.0.4 (is it also creating some "blobs" file during backup?)
And is there any reason to use Odin v3.07? Using v1.85 atm.
Click to expand...
Click to collapse
I have it in My Dropbox. will update it here. But till then use V5.5.0.4. but i dont think so it has blobs for backup..
I tried to flash v5 and v4 but also stuck on recovery.img. Only this time a green bar of process move just a little at beginning. "SOS" msg in first square under "Android+SLP" is meaning smth?
And still when I go into Download Mode I see msg:
"Downloading...
Do not turn off target !!"
Click to expand...
Click to collapse
Is this a right thing if I didn't plug cable yet?
How can I try to fix it in another way? Or only what I can try is flash stock rom and then flash again CWM? But I dont know if my CWM backup I have done yesterday will work now. What if I recover backup later and this situation happen again?
Is it possible for our Royal delete and install CWM via adb console?
here you go bro.. sorry for late reply..
1) CWM 6.0.1.1 ODIN - http://www.general-files.com/download/gs5d642b2ehdi0/CWMv6.0.1.1_ODIN.tar.html
2) CWM 6.0.1.1 ODIN Touch - http://www.general-files.com/download/gs5d6418afhdi0/CWMv6.0.1.1_TOUCH_ODIN.tar.html
3) CWM 6.0.1.1 CWM Flashable - http://www.general-files.com/download/gs5d6422f1hdi0/CWMv6.0.1.1_CWM.zip.html
4) CWM 6.0.1.1 Touch CWM Flashable - http://www.general-files.com/download/gs5d642b09hdi0/CWMv6.0.1.1_TOUCH_CWM.zip.html
krobar77 said:
here you go bro.. sorry for late reply..
1) CWM 6.0.1.1 ODIN - http://www.general-files.com/download/gs5d642b2ehdi0/CWMv6.0.1.1_ODIN.tar.html
2) CWM 6.0.1.1 ODIN Touch - http://www.general-files.com/download/gs5d6418afhdi0/CWMv6.0.1.1_TOUCH_ODIN.tar.html
3) CWM 6.0.1.1 CWM Flashable - http://www.general-files.com/download/gs5d6422f1hdi0/CWMv6.0.1.1_CWM.zip.html
4) CWM 6.0.1.1 Touch CWM Flashable - http://www.general-files.com/download/gs5d642b09hdi0/CWMv6.0.1.1_TOUCH_CWM.zip.html
Click to expand...
Click to collapse
Great buddy. This link is not available in Adam thread. Ask him to add this one also.
Ok guys, I flash stock XWLA4 and its working . I didn't do any reset/format so could I use rom just like that again? I mean apps would be working good? Now if I want to use Titanum Bacup for some apps, everything gonna be ok later after flash another rom and I restore them from TB? Or install them in normal way and I restore only app's data?
I thought CWM is a separated thing from ROM Oo. I was wondering is it gonna work when I flash rom but not CWM .
Rejwen said:
Ok guys, I flash stock XWLA4 and its working . I didn't do any reset/format so could I use rom just like that again? I mean apps would be working good? Now if I want to use Titanum Bacup for some apps, everything gonna be ok later after flash another rom and I restore them from TB? Or install them in normal way and I restore only app's data?
I thought CWM is a separated thing from ROM Oo. I was wondering is it gonna work when I flash rom but not CWM .
Click to expand...
Click to collapse
Great. BTW Have listen about this tool -> [TOOL] APK Batch Installer
Thx for this . But can I chech what apps I want to backup? I need only few (data) + some games (also data) so I think my TB will be enought . Rest of apps I will install from market. I don't have any apk on my hdd anyway .
Rejwen said:
Thx for this . But can I chech what apps I want to backup? I need only few (data) + some games (also data) so I think my TB will be enought . Rest of apps I will install from market. I don't have any apk on my hdd anyway .
Click to expand...
Click to collapse
The apk tool backs up all the apps but gives you a choice which apk to restore.. It creates an apk of all the installed apps so that you don't have to download and reinstall all apps
From my CM10.1 powered galaxy R
One more question before I try to do smth more like flash CM10 and CWM v6. Is there any reason to use Odin v3.07? Using v1.85 atm.
Rejwen said:
One more question before I try to do smth more like flash CM10 and CWM v6. Is there any reason to use Odin v3.07? Using v1.85 atm.
Click to expand...
Click to collapse
You cannot flash ICS roms with v1.85. Must use v3.07 for those.
Adam77Root said:
You cannot flash ICS roms with v1.85. Must use v3.07 for those.
Click to expand...
Click to collapse
Well it actually works but its risky, sometime gets stuck in between. Happened with me.
Sent from my GT-I9103 using xda app-developers app
Hello All,
My N8020 is now semi brick after trying to flash it back to stock.It was on custom rom before but showing different errors so i decided to change the rom...First i tried to install another custom rom which was cynogenmod 10 but after intstalling this rom from cwm phone stuck at cynogenmod startup logo i waited for long time but still nothing.Then tried different versions of cynogen roms but same...After all this i decided to install a official rom so i flashed this with
N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar
but now the real problem started..Now i can boot phone in download mode but not in recovery mode at all...Then i tried to flash a cwm via odin and get "PASS" messege in odin but still no recovery mode...Tried to flash to flash clockwork recovery several time but nothing changed and then i check in download mode the custom flash counter increase every time i try to flash cwm...then i searched the stock recovery for 8020 but when i try to flash it via odin i always get "FAIL"...
Now i m out of ideas and searching for a real solution....SO can anybody please tell me what to do next to get it back to life???
Regards,
Muneeb
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply but can u please tell me from where i get n8020 twrp?i only able to find N8000 to N8013 but cant find for N8020....
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thnx but its still same..did this as per your instructions but tablet still on samsung galaxy note 10.1 logo i have pressed the vol up for long time but nothing...One more thing that one more count added to custom binary download.
Still no luck...
I'm sorry to hear that. I hope you'll find a solution soon.
Sent from my Nexus 5 using Tapatalk
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
MUNEEB_AKHTAR_RAZA said:
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
Click to expand...
Click to collapse
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
KDKobes said:
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
Click to expand...
Click to collapse
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
MUNEEB_AKHTAR_RAZA said:
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
Click to expand...
Click to collapse
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
KDKobes said:
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
Click to expand...
Click to collapse
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
I didn't find a working pit for my n 8010. Don't worry too much about the binary counter, mine was 118 today, I reset it with triangle away. I don't have the balls to do a nand erase on mine, I'm not even sure that is required for my problem, at least mine is working.
Sent from my Nexus 5 using Tapatalk
MUNEEB_AKHTAR_RAZA said:
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
Click to expand...
Click to collapse
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
KDKobes said:
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
Click to expand...
Click to collapse
Never ticked this option yet...So you suggest me to do so?
MUNEEB_AKHTAR_RAZA said:
Never ticked this option yet...So you suggest me to do so?
Click to expand...
Click to collapse
Yes, dont check auto boot though leave that unchecked and if it passes reboot to recovery and do a data wipe then reboot. If you run into error add your pit file to the pit window along with your stock tar.md5 file and run it just as I mentioned before with repartition selected
Make sure the pit file you use is for your device model/storage size
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
pilo_kulet said:
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
Click to expand...
Click to collapse
Last post 2014 poster no longer active on the forum .
TWRP and CWM see development threads .
Oddly enough a notification was sent to my email. That's correct though I'm no longer active in this forum.
Here is all I have left on the Galaxy Note 10.1, anything else you need you will have to find.
https://drive.google.com/open?id=0B-BP_JVn6T1Mb1o4UXVUYUpnc0E
Thanks for that .
I PM the mods is probably why you got the message .
Sadly/ logically this forum is nearly dead .
Hi there,
I have a Samsung Galaxy Note 10.1 WIFI (GT-N8010). I had it rooted, custom ROM on it.....frequently forced closes so i decided to cleensweep the thing. Went into TWRP....did factory reset (wipe cache, Dalvik and System) and then formatted DATA.
So no OS anymore.
Then when i wanted to flash the custom ROM (from external SD like i always do) again.....it got stuck.......couldnt flash it it said. Okay.....so.....now what i thought. I tried the procedure of flashing with the galaxy Toolkit. Doesnt work because it waits for "debug enable"....but there is no OS.....so cant do that.
Then i made the biggest mistake i guess.
I flashed new firmware through ODIN.....but accidently for the GT-N8000. Strange that the procedure went well.
Then it came: the device got stuck on the Samsung logo.....no bootloop....just the logo. When i restarted the tablet it went strait to download mode (power and vol - normally) I dont even get the choice of cancelling or continue to download mode. The screen looks like this:
ODIN MODE
product name: gt-n8000
current binary: samsung official
system status: custom
(and then in gray) RP SWREV: A2
And NO custom binary download: no
When i go into recovery mode (power and vol+) it goes strait to the android with "downloading, do not turn off device"
WHAT HAPPENED ????
And does somebody know what to do PRETTY PLEASE
Hope you guys know what to do....or is it bricked ????
PS. It's still seen by Odin !
Greetz from the netherlands
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
crombull said:
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
Click to expand...
Click to collapse
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
Click to expand...
Click to collapse
I have a similar problem and can't flash original firmware via odin. could you send me the pit file you have used?
Thanks in advance!
I just sent you the pit file through mail
Hope it helps
Bricked since updated to KitKat - Odin flashes fail!!
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
Could I please have a secure PIT file for the GT-N8010 16GB bought in France? I've bricked my Note 10.1 after updating to the official Kitkat (N8010XXUDNE4_N8010OXXDNF1_HOME.tar.md5). I did a wipe data and cache and all seemed to be working fine for 2 days... but the tablet got stuck on a game and after a force close has been stuck in a bootloop with no access to recovery mode. I do manage to get into download mode and have tried to flash a number of times with different roms (going back seems to be impossible with KitKat) but to no avail as I keep getting an issue about 'no PIT partition'. I took it to a shop (as my warranty ran out a month ago - lucky me!) and they were also unable to flash the tablet so the issue does not seem to be the cable or the drivers (as Odin recognizes the tablet). I tried flashing with a PIT file (ticking re-partition with and without the kitkat rom) that I got on some website but I'm not certain it is the right one for my GT-N8010 and it also fails. Before I try a Nand erase I want to make sure that I have the right PIT file. By the way does the PIT file you have work with KitKat as the one I found seems to be for an outdated version of Android and as Kitkat doesn't enable one to go back to an older version of Android I'm in a catch 22 with only the Nand erase option left?
FYI, I tried flashing a recovery like TWP to try flashing custom roms but it also doesn't work.
Any other ideas? Should I tick Nand Erase and Phone EFS Clear. As the issue seems to be the kitkat bootloader is it possible to flash a bootloader? Can't find any trace of anything other than the tar files for GT-N8010 in Jelly Bean or KitKat. Anybody have a bootloader, PDA, CSC and Phone file for the GT-N8010? Can one attempt the following on a GT-N8010: http://forum.xda-developers.com/showthread.php?t=2610757&page=2 ?
Thanks for any help as I've been without my tablet for weeks now!!:crying:
Need PIT file for GT-N8010 16GB under Kitkat
Any PIT file please? Thanks!
Same problem here
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
can you send me that pit file too, please?
Me too!
I'd like that file too...
I just flashed the wrong bootloader file onto my N8010. Luckily it's still working!
Still looking for the correct KitKat bootloader, but I'd happily take the pit file and see if that works.
Pretty Please!
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
I have the same problem... flashed 4.4.2 on a North American Galaxy Note 10.1 (2012) with Odin and am stuck in downloading mode.
Can someone send me the pit file I require? Please!
Click to expand...
Click to collapse
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
mendacium said:
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
Click to expand...
Click to collapse
Thanks... Any idea what the name of the original PIT file is?
(I believe it should have the .pit extension. I hope I can rename this file accordingly?)
Sorry, no.
Heimdall doesn't seem to care how the file is named. I'd hazard a guess, that it's similar for most Samsung devices.
help please. .
Hi
Any chance of sending me the PIT file. . I did the same! :'(
Thanks in advance .
.
Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1
Click to expand...
Click to collapse
and on odin
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I
dextroit said:
Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say and on odin
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I
Click to expand...
Click to collapse
As it seems you have downloaded it an older firmware than you have flashed. That's why it gives you an error. You should flash the latest!!
t-shock said:
As it seems you have downloaded it an older firmware than you have flashed. That's why it gives you an error. You should flash the latest!!
Click to expand...
Click to collapse
Ok so I downloaded the latest firmware I believe from Sammobile it took me 4 hrs... and when I try to flash it with Odin 3.10.7 it says
"Get PIT for mapping"
Click to expand...
Click to collapse
and it gets stuck on that step...
any idea what else I can do?
dextroit said:
Ok so I downloaded the latest firmware I believe from Sammobile it took me 4 hrs... and when I try to flash it with Odin 3.10.7 it says
and it gets stuck on that step...
any idea what else I can do?
Click to expand...
Click to collapse
Find a pit for your pc and click re-partition
t-shock said:
Find a pit for your pc and click re-partition
Click to expand...
Click to collapse
Sorry to keep bothering you , and thank you for you'r help so far... I can't find this PIT file I read that is in the .md5 file? Really no idea, i prefer to ask instead of screwing up again.
Same problem, but I can't flash stock ever again, I can only flash custom roms, but try flashing twrp recovery and flash a rom to see if you partition is corrupted,
dextroit said:
Sorry to keep bothering you , and thank you for you'r help so far... I can't find this PIT file I read that is in the .md5 file? Really no idea, i prefer to ask instead of screwing up again.
Click to expand...
Click to collapse
Use one from the G920F
Just upgrade to latest modem and bootloader for your model via odin. Also flash TWRP. Install a custom rom and you should be ok
shotgun10ga said:
Same problem, but I can't flash stock ever again, I can only flash custom roms, but try flashing twrp recovery and flash a rom to see if you partition is corrupted,
Click to expand...
Click to collapse
I have TWRP but how can I install a custom ROM? I mean is there someway to pass the zip file to the phone bricked?
t-shock said:
Use one from the G920F
Click to expand...
Click to collapse
Ok so i found a few but it has a warning
warning : pit can brick your dévice,so use it only if you need and with modération
Click to expand...
Click to collapse
Uh so I'll wait for you answer but my question is I'll use ZEROFLTE_EUR_OPEN.pit : hidden (2560) 10 240KB cache: (51200) 204 800KB from this post http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459 is that ok for my device, do I need to flash the PIT first and then the stock firmware or both.
bahmonkeys said:
Just upgrade to latest modem and bootloader for your model via odin. Also flash TWRP. Install a custom rom and you should be ok
Click to expand...
Click to collapse
Ok so after flashing the modem and the bootloader I'll be able to transfer the custom rom to the memory phone? or how do I do it
Thanks all of you guys for your help
I think I am in the same boot, I've tried flashing the stock rom at least 8 times with no luck even it says it passed, I even flashed modem and bootloader with with stock rom,
I don't have the files anymore. But what I had to do was this:
Download the latest Stock from Sammobile for your phone. Make sure it's the latest, that will give you the latest Modem and Bootloader.
With Odin (right click and Run as superuser), flash the Stock.
Also then Flash TWRP.
I would search in Youtube, I think I had found videos of people doing what I'm suggesting. Hope you can fix it!
gaston_garcia said:
I don't have the files anymore. But what I had to do was this:
Download the latest Stock from Sammobile for your phone. Make sure it's the latest, that will give you the latest Modem and Bootloader.
With Odin (right click and Run as superuser), flash the Stock.
Also then Flash TWRP.
I would search in Youtube, I think I had found videos of people doing what I'm suggesting. Hope you can fix it!
Click to expand...
Click to collapse
I downloade the latest firmware but can't flash it because asks for the PIT file, no idea really.
dextroit said:
I downloade the latest firmware but can't flash it because asks for the PIT file, no idea really.
Click to expand...
Click to collapse
****. I don't know what that is.
Check youtube, it's really full of excellent help videos.
dextroit said:
Ok so i found a few but it has a warning
Uh so I'll wait for you answer but my question is I'll use ZEROFLTE_EUR_OPEN.pit : hidden (2560) 10 240KB cache: (51200) 204 800KB from this post http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459 is that ok for my device, do I need to flash the PIT first and then the stock firmware or both.
Click to expand...
Click to collapse
Although it IS NOT recommended to use pit files, give it a shot. If your phone is already kinda bricked then you won't loose anything at the trying!
I recommend this firmware and that pit
I'm not responsible your your device is completely destroyed after this. At the odin don't use re-partition
t-shock said:
Although it IS NOT recommended to use pit files, give it a shot. If your phone is already kinda bricked then you won't loose anything at the trying!
I recommend this firmware and that pit
I'm not responsible your your device is completely destroyed after this. At the odin don't use re-partition
Click to expand...
Click to collapse
RIP...
Ok so I place the firmware on AP and the PIT file on Pit then I hit start but Odin still says
<ID:0/007> Get PIT for mapping..
Click to expand...
Click to collapse
:crying: I am really confused now.
dextroit said:
RIP...
Ok so I place the firmware on AP and the PIT file on Pit then I hit start but Odin still says
:crying: I am really confused now.
Click to expand...
Click to collapse
Try without pit
dextroit said:
Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say and on odin
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I
Click to expand...
Click to collapse
I had the EXACT same problem happen to me yesterday, and it was just to do with the rom I downloaded. I downloaded the new rom from this link ( http://forum.youmobile.org/downloads/?sa=view&down=4400 ) and flashed using odin, and it worked perfectly.
t-shock said:
Try without pit
Click to expand...
Click to collapse
and with PIT is the same stuff
emcardle660 said:
I had the EXACT same problem happen to me yesterday, and it was just to do with the rom I downloaded. I downloaded the new rom from this link ( http://forum.youmobile.org/downloads/?sa=view&down=4400 ) and flashed using odin, and it worked perfectly.
Click to expand...
Click to collapse
Hmm but thats for the 920F should I flash that to my phone?
Hey guys I think my GS5 900I is stuffed. Battery was knocked out during factory reset, now I can't reboot it to turn usb debugging on, I have tried a number of roms through odin and android toolbox including cwm, philz, twrp, and stock. It won't take me past the samsung screen. Please help. I have tried adb sideload but not sure if I've done it right or used the correct zip file.
Can u give us more details , as there is many variants for s5 , & in ur title its says 900i & in ur post s5 ??? , please give us more details , ..
All i can say it its try to flash odin fw with pit file or at least tick a nand erase All with flashing fw ok
Thank you for using XDA Assist ,,
thereassaad said:
Can u give us more details , as there is many variants for s5 , & in ur title its says 900i & in ur post s5 ??? , please give us more details , ..
All i can say it its try to flash odin fw with pit file or at least tick a nand erase All with flashing fw ok
Thank you for using XDA Assist ,,
Click to expand...
Click to collapse
Hey mate cheers for the response. What do you mean by "fw"? Where can I find the correct pit file?
Other than that I have just done a factory reset, flashed a stock recovery with Odin, and have Odin set up ready to go with "Nand erase all" ticked, "auto re boot" unticked, until further notice.
Thanks
Fw means firmware for your S5 , pit file , u can get it from S5 forum , as i can't link to u correct pit threads but u can find it there ok , nand erase All need full firmware that flashed from AP or pda from odin ok ..
Thank you for using XDA Assist,,