Hi.
Something happens with the P2 (European) and it is when I connect the headphones, the sound is limited to a volume lower than the maximum, seeing the size of the volume bar is approximately 75% and if I want to upload it by pressing the Volume + button an error message appears .. "UU has stopped ..." as if giving an error message of the User Interface (UI) and does not let the volume go down, download it as you want, but upload it, as soon as it reaches that top of 75% approx. gives an error on the screen, I can imagine that it is a protection, okay, but if I want to upload it more under my responsibility, I should be able to ... or warn me, but I get an error and it ejects me to the main screen of the mobile phone ..
It is not root and I have the launcher NOVA in its latest version, to give data .. someone else happens ..?.
Thank you.
Related
Device: HTC One M8 running Liquid Smooth from may 13th.
This is rather odd - All day, my phone was working just fine. As I was listening to some music (through the speaker... or should i say speakers boomsoundhighfive:highfive, I pushed the power button to unlock the phone to text somebody, except all I could see was the music app (apollo) in the background with a dialogue saying that android system UI has stopped. Every time I hit "ok", it popped right back up. I'm assuming that that was because it was trying to restart, and it just kept crashing.
A bit later, it was still doing the same thing when all of a sudden I could no longer turn on the screen. However, my music is still playing, and I can control the volume with the vol buttons. The only other thing I can do is double tap the screen to get a bit of hepatic feedback from double tap to wake. Also, the low battery notification LED is now flashing, as it was at fairly low battery when this started (around 30, it's been about 45 minutes since this started).
I can't reboot through ADB as usb debugging isn't on, and I tried holding down the power button for about a minute with no luck.
Anybody got any advice? My current plan is to wait for it to die and hope it reboot normally... Otherwise I might boot straight into recovery and restore a nandroid...
Alright, sorry for creating this thread - it died, I plugged it in and turned it on. It appears to be completely working. Anybody know why this would happen? It seems a bit odd.
Suspected problem: Bootloop
It all started when I connect my phone (Garmin-Asus A10 (v5.0.82 (updated with GarminAsusPhoneUpdater_Telenor_v2.0.3.exe of denmark))) on laptop through USB cable, the USB slot looks slightly damaged already upon looking at it, after connecting the expected to be happen is that the back-light will turn on, but what happen is that the phone has no response from it, I try to press the power button still no response, I removed the battery and bring it back and try to turn on again the logo appears (without vibrate which is supposed to be present in turning on my phone) then disappear after 7-10 secs.
It's already stock on the logo as I turn it on, the moment I pressed the power button the logo appears for about 7-10 secs then it disappear, also when I removed the battery and put it back the logo appears without pressing anything and disappear again after 7-10 secs.
I try to wipe the data through Volume Up + Volume Down + Power Button the ** WIPE USERDATA ** appears but then after a few secs it disappear again which is supposed to last for about a minutes.
And also I still can go to the **USB POLLING MODE ** through Volume Up + Power Button but seems like there is nothing to do with that thing.
I know it will be easy to fix this with the use of Garmin-Asus phone updater but it requires the phone storage which is so impossible to access at this point.
Hope you guys can help me with this, I badly need that phone.
----
Updates:
I can already open the phone and go to the home screen and menus... etc., but only when I close/cover the 1st metal/copper of the battery (back view (- to +))., but then I get an error saying that "The installed battery is not compatible with this device"
Upon doing this the phone is keep on rebooting, even if I already turn it off it keeps on turning on by itself, also I can't use any network at this point.
I already formatted the phone using master clear & **WIPE USERDATE** (Volume up + power button) still got the same problem.
And also updated with 006-B1243-00.update (The last .update file I used to update my phone (V5.0.82 DN)), upon rebooting after verifying the .update file it just blink twice then the update stops already at that point.
Updates 2:
Physically there is nothing wrong with the phone, I can still use the phone but as I mention already "only when I close/cover the 1st metal/copper of the battery (back view (- to +))." everything works fine except for the error "The installed battery is not compatible with this device" the red with "X" battery (Screenshot-1434948958913)
Also I notice something from my storage the "System Volume Information" (Screenshot-1434949331146, Screenshot-1434949336619, & Screenshot-1434949345666), I'm pretty sure that I haven't seen yet that before, I deleted the folder still it comes back.
Also once I connected my garmin phone to my computer the USB connected thing (Screenshot-1434949876071) don't disappear just until I restarted the phone.
Thanks in Advance.
Hi
My nexus 5 running into issues again. .
It automatically goes to silent mode. After increasing the volume again it goes back to silent mode.
I can see the volume bar decreasing from full to vibration in front my eyes.
Also sometimes the power button won't work for sometime.
If I tried to reboot, it automatically goes into recovery mode without pressing any combination of keys.
Once I press volume button it goes into one of the recovery settings and gives a message NO COMMAND
After multiple hits of power button or some combination will boot the phone into safe mode sometimes..
Now I am stuck with its issue of automatically turns into vibration mode.
I am worried to reboot bcause it may stuck in recovery.
Any solution...
I used to have this issue in lollipop and got fixed in marshmallow..
But recent patch fix update in December gives the problem again. .
Please someone help or forward to a thread which helps to clear this problem,m
Sounds like you may have a sticky power and volume button.
Maybe open up the phone and swab around the buttons with a bit of alcohol, then rapidly press and release the buttons using slightly more pressure than normal. Not too much pressure though.
Please my coolpad isnt booting. I mistakenly messed around with rom manager and i wanted to reboot my phone. And now its stuck showing this exactly "important tip ∆ downloading and installing non-cool official systems may give the device and no longer enjoy free coolpad after-sales services. Follow-up after sale will be charged according to regulations. If you still want to download an unofficial system,press the volume up key,otherwise press the volume down key to cancel the operation " then when i press the volume up its says "important note do not disconnect the data cable".. And it the volume up button only takes me to the other page when my charger is plugged in and no volume combination to boot into any mode and holding the power button down only reboots back into the same page please help me anyone. Also computer doesn't see the phone too.
Hi, I started having the strangest issue 2 days ago. Phone model is Samsung Galaxy A50.
I have been unable to unlock my phone once I pressed the lock button or if it went to sleep (screen off).
The only way out of the issue is to restart it by pressing volume down and power for 5 seconds. I put the screen timeout to 10mins (which is the maximum). But no long term solution. Whenever the screen turns dark it stays dark. If a call comes in, the phone vibrates (or ring) but any interaction with the phone is impossible. If I play music, the music continues once the screen is off. The sound can be turned up or down, but it's the only thing that can be done.
While the screen is on, changing the volume via the buttons affects the actual volume of the music, but there is no UI indication that the volume changes, no popup nothing.
So all physical buttons are working correctly.
I have trie "reset parameters", I have tried "reset all data" (backed up everything through Smart Switch). It doesn't change a thing. The phone is reset (still on android 11 though, although I bought it on android 10...) but the issue remains.
Now something very interesting :
Just now, I setup Phone Link for windows 10, so that I am able to see and answer texts and phone calls while at the office. Which works, it sort of defeats the purpose of a "cellular" phone but well...
HOWEVER : while my phone is connected to my desktop through Phone Link. I can lock and unlock at will, change volume and see the UI pop up (via the windows interface or directly on the phone, same behaviour) It's basically fixed. I thought it was fixed for good, so I disconnected my phone from Phone Link. The screen went black as before and there was nothing I could do except reconnect it via Windows 10 (then it immediately starts behaving as usual again...).
My guess is it's definitely software. I just don't understand why a factory reset didn't do the trick...
I wanted to try and reset through the bootloader, but I never managed to effectively get into the bootloader (through volume up and power while the phone is off).
I do not recall making any updates or installing anything just before these symptoms occured. I did install a firmware update that was available after these symptoms started but to no avail
Has anybody seen this before ? Thanks in advance