Database Info

Stuck in Bootloader!

Well I think I'm gonna be sick....
Help me please. I killed my baby!!!!!
ohhh maybe not ok I won't freak. I took the risk.
Sorry bout that just whinning out loud. Here is my sotuation. I wanted to upgrade my rom to mario's 9.6 over at ppcgeeks. I thought I followed all the rules but I got stuck in the bootloader mode I think. All I get is a dark screen that says serial when not connected to cable or usb when it is. (oooooooooh its bad it hurts) Ok, I disconnected it from comp tried to launch the rom exe after I sft reset. It went to bootload and nothing works now no sft or hrd reset. Did I kill her? ( It really hurts. Please say it aint so. Ill tack it all back) I'll stay away from rom updates forever !!! Just give her back to me un harmed)

There's a tutorial for Stuck In bootloader somewhere... please search...
For thoose who stuck in bootloader this is how to unstuck:
1. Get Mtty here:
http://rapidshare.com/files/28321691/mtty1.42.zip.html
2. Right Click Activesync icon in tray, and select connection setting, then un-mark Allow USB connections at Activesync Connection settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Extract the zip file and Run mtty.exe and select USB from the Port dropdows list and then click OK button.
4. press Enter two times for showin USB>
5. Type:
set 14 0
[ENTER]
task 8
[ENTER]
(for soft-reset).
6. Ur device should reset and u might close mtty utility.
7. Done.
ur device should be just fine... if not try to re-flash the OS again while in Bootloader (press and hold POWER+RECORD button then press RESET)
re-enable/re-mark Activesync after this proccess might necesarry, to allow USB Connection again for enablin Activesync ur pda with ur PC.

u r the best man..
hugi

Praise you Helmi!!!
You are AWWWWsome. I followed your instructions and my baby lives.
I am stuck with mario 9.6 rom but that ain't bad compared to a bricked phone.
I am interested in how to cook my own rom. I'm gonna keep readin though cause I apparently have a lot to learn.

our hero
Helmi_c is my hero.

Damn Helmi_c you saved my phone

Seriously Stuck
Helmi...
I'm in the same boat except I cannot use mtty because I do not have an option for USB, only COM1 and 2......I also tried another utility I found on ppcgeeks called uni_exitbootloader without success. The details can be found here:
http://www.ppcgeeks.com/cant-update-rom-now-stuck-in-bootloader-t7982.htmlhttp://www.ppcgeeks.com/cant-update-rom-now-stuck-in-bootloader-t7982.html
My question is What can I do now???
Any thoughts....Anyone?????

GOD BLESS YoURE HART OMGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG URRRRRRRRRRRA GENIOSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

tip for Mac OS X
I tried several times to run the mtty.exe program without success. I was running WinXP inside Parallels and each time I connected the PPC6700 to the Mac, Parallels told me that another program was using the PPC6700. After acknowledging that message mtty would not show me a USB connection.
Finally I hit on the idea of rebooting my Mac and booting directly into Windows (I used BootCamp to create a separate Windows partition). Obviously this way, Parallels was not involved. mtty immediately showed me a USB option, and 10 seconds later my unit was rebooting successfully.
Many, many thanks! Un abrazo muy fuerte!
S

same thing
im not seeing usb what should i do im using windows xp

Stuck too
I don't know if this is related but a I had no response from my xv6700 so I hooked it up and it would reboot over and over to the white Verizon screen. Later it gave just a white screen with an off-white "skunk line" down the screen. Now It doesn't reboot and I have just a red blinking light. I tried popping the battery when this first started with no luck as well as a hard reset using option 3 (2 function keys and pin-hole reset).
I turned USB connections off in my Vista Mobile Device center but I still don't get a USB option in mtty.
Is there anything I can do or is it bricked?
Thanks for the great forum!

I have since moved on to the titan, but it is very difficult to brick these phones. Can you get into bootloader? if i remember its camera + power + soft reset button (i think), once in that you can flash a new rom like the verizon stock to get back to basics. you should be doing this all in XP, not vista. I think some people could, but i never flashed in vista, xp was tried and true and never failed me (only reason i still have my crappy laptop with XP!)

Thanks
Thanks for the reply Friguy33. Somehow, a miracle I think, it started to come back with the initial setup but it still reboots itself throughout the process and after. The battery is drained and it reports that once the today screen comes up but instead of just starting to charge it, something else I think causes it to reboot.
Prior to reboot the screen dims about 40%. I tried those three buttons but nothing new has happened and no boot loader screen. I don't understand why it keeps rebooting.

helmi_c said:
There's a tutorial for Stuck In bootloader somewhere... please search...
For thoose who stuck in bootloader this is how to unstuck:
1. Get Mtty here:
http://rapidshare.com/files/28321691/mtty1.42.zip.html
2. Right Click Activesync icon in tray, and select connection setting, then un-mark Allow USB connections at Activesync Connection settings.
3. Extract the zip file and Run mtty.exe and select USB from the Port dropdows list and then click OK button.
4. press Enter two times for showin USB>
5. Type:
set 14 0
[ENTER]
task 8
[ENTER]
(for soft-reset).
6. Ur device should reset and u might close mtty utility.
7. Done.
ur device should be just fine... if not try to re-flash the OS again while in Bootloader (press and hold POWER+RECORD button then press RESET)
re-enable/re-mark Activesync after this proccess might necesarry, to allow USB Connection again for enablin Activesync ur pda with ur PC.
Click to expand...
Click to collapse
OMG!! it worked. Thank you so much. You are the best!!

Maddddd LOVE!!!
I Love Helmi_C

forgetting
you are forgetting to go into activesync and shut off the usb connections, then unplug your apache, then reboot the apache, plug it in, then rerun mtty. you dont have to reboot the apache, but i have always found it to be best.

This still isnt working for me. I tried the way on ppcgeeks too. =/

I, I can´t too.
I connect, usb are there, but when i go for 4 step, on program show "Cmd>" not "USB>"... USB show only title of window... i put step 14 0 fornt Cmd, shoe again Cmd and after put Task 8 and show invalid command!
Someone can help me?

I, I can´t too.
I connect, usb are there, but when i go for 4 step, on program show "Cmd>" not "USB>"... USB show only title of window... i put step 14 0 fornt Cmd, shoe again Cmd and after put Task 8 and show invalid command!
Someone can help me?

The easiest way to get outa bootloader is to hard reset a few times (it's gonna go back into to bootloader each time) then disable your ActiveSync/Windows Mobile Device Center USB connections and re-flash. Works for a wuite a few people I know. Give it a try.

[TUT] How to update your flytouch 2

How to update your flytouch 2​
I have had my fly touch 2 for 3 days now and i have been going through 1000 of post on trying to update my flytouch 2 but no one could really help me and there is a bit of confusion on how to get in the recovery menu. Now i have been doing a bit of research which will help people who got stuck like me and hopefully get this community of the floor with more builds coming out every week like the zt-180.
First of all you need to find out what build you are on ( Settings/about device/build number)
Firmware: deb-r2.1.1561 - Official release
Firmware: deb-r2.1.1480 - official release
Firmware: deb-r2.1.1170 – Seller Installed
Firmware: deb-r2.1.1001 – Factory Installed
Now what i have found out is that the factory ships these devices out with 1001 and ships the seller software to update the device via a pc, the the seller is supposed to update the device to (Firmware: deb-r2.1.1170 – Seller Installed). But many sellers are just shipping the devices out with the 1001 firmware. The problem with this is that there is no recovery menu and you cant install of the sd card you also cant use the system update app. So if you have been spending your time pressing button combinations and it keeps getting stuck on infotmic logo then your on 1001.
People that are on firmware 1170 and above can update using the system update app.
But if you on 1001 your out of luck you going to have to go down to your local electronics store and buy a male(A) to male(A) usb or make one if you want. I dont recommend buying of ebay, might fry your tablet if wired up wrong.
So now you know what firmware you are on and you have your usb or you just want to install updates via usb then this tutorial is for you.
MAKE SURE YOU BACK UP YOUR FILES FIRST WITH TITANIUM BACKUP AND MAKE SURE YOU KNOW YOUR REGISTRATION KEY MINE IS ON A STICKER AT THE BACK IF YOU HAVEN'T GOT ONE CONTACT YOUR SELLER
First of all you will need to download burn tool and 1170 update.
DOWNLOAD
Step 1: Extract the zip file to your desktop there should be 2 files burntool and android.
Step 2: Switch of your flytouch 2 and plug the usb into the top usb slot and into your computer.
Step 3: Hold down the menu+home+power, this will put you into usb mode.
Step4: Your computer should say a new usb device has been found and it will promote you to install it. Now if your on windows xp a window should pop up saying Install automatically or Install from know location. click install from know location and browse to your desktop and click burntool folder and click ok, it should install and promote you with a continue anyway message. For windows vista or 7 it will try to install automatically and fail and ask you for the location of the drivers.
Step 5: Now we are all set up to update your tablet. First i recommend watching this video so you understand how burntool works.
http://www.youtube.com/watch?v=W1dSM2q9nIk
Step 6: Now your connected to the pc open up burntool (windows 7 and vista right click and run as administrator), there should be a green box in device 10.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 7: Click Settings, and tick burn. now copy this picture below all the files are in android folder on your desktop. If you cant find uimage in the folder make sure you its set to all file types.
Step 8: once you have located all the files click the left button at the bottom of the setting page and then click start.
No once this is done your flytouch should boot up into the new firmware, once on the home screen re register and connect to wifi and do a system update to go to the latest vision.
Just a few more things
>Yes this will fix the green screen of death.
>Make sure you keep the power plugged in at all times.
> Always remember flashing can be dangerous and it is possible you can brick your device please ask if you have any problems im sure i and others can help.

Thanks very much!! my friend purchased 2 of these for his kids christmas and so far I have rooted both flytouch2's and made launcher pro the default home app.
However 1 tablet's touch screen is very bad, and it keeps freezing on the green screen when booting up. The other one is completely fine very odd...
But following your guide which I did on both has now fixed all issues and now I hope to put on a much better firmware, well there is'nt really any new firmware for
this at the moment only the other tablets... gingerbread I hope to be out soon as this will really open up the tablet as the spec is very good
Thanks again

Thanks very much

Thnak you very much

Thanks for a friend who asked me to save his flytouch 2 !

I just received my flytouch 2 with F/W deb-r2.1.1001 installed. I am trying to do the update procedure using an A to A USB cable but I can not boot into USB flash mode on the tablet. If I hold Menu - Home - Power I get a count down from 5 saying 'Press key combination for recovery' If I do nothing it counts down and boots normally.. If I press Home - Menu again it will flash recovery and reboot. There is no USB flash mode that I can seem to get into.
Any help is appreciated.
Thanks

I just used Terminal Emulator and flashed the recovery.img inside the update.zip
su
flash_image recovery /sdcard/recovery.img
and now recovery should work

freezing on the green screen
azztech30 said:
Thanks very much!! my friend purchased 2 of these for his kids christmas and so far I have rooted both flytouch2's and made launcher pro the default home app.
However 1 tablet's touch screen is very bad, and it keeps freezing on the green screen when booting up. The other one is completely fine very odd...
But following your guide which I did on both has now fixed all issues and now I hope to put on a much better firmware, well there is'nt really any new firmware for
this at the moment only the other tablets... gingerbread I hope to be out soon as this will really open up the tablet as the spec is very good
Thanks again
Click to expand...
Click to collapse
I have the same problem, it keeps freezing on the green screen when booting up, how could I solve it????

When i saw this thread i wasn't logged in to see the images and do the same. I got the "uImage" file and selected it into the "uboot-img" field to flash. Then? Green screen!
Then i corrected the fields like the image and flashed the 1170, and everything goes OK, ready to update to versions further
I hope that it help someone with the green screen freeze.

Mine arrived today and would only boot to the green screen. I solved it quite easily.
1. Turn off
2. Press and hold POWER and HOME until the recovery screen appears. The recovery screen has a black background and blue type.
3. Press the VOL- twice to highlight "wipe data/factory reset".
4. Press MENU to select.
5. Press VOL- seven times to highlight yes.
6. Press MENU to select and then wait for format to complete.
7. Press MENU to reboot.

andrewbaisley said:
Mine arrived today and would only boot to the green screen. I solved it quite easily.
1. Turn off
2. Press and hold POWER and HOME until the recovery screen appears. The recovery screen has a black background and blue type.
3. Press the VOL- twice to highlight "wipe data/factory reset".
4. Press MENU to select.
5. Press VOL- seven times to highlight yes.
6. Press MENU to select and then wait for format to complete.
7. Press MENU to reboot.
Click to expand...
Click to collapse
Hello Dear Friend
Please Help Me
my tablet pc is superpad II after boot , automatically Goes to
"touch crosshair to calibrate" and Touch Screen Does not work
my android is :
hotfile.com/dl/124480279/41152b2/superpad9V1_0719-1.zip.html
Screen Completely black , Please help for fix Problem !
Thank you very much

i'm having the same calibration problem.
also, would it be possible to get the 64bit driver for the ft2 ? that would be much helpful.
tia

Bootloader and startup problem

Hello guys,
I've bought myself a secondhand I-mate Jam with a French Rom on it which I offcourse want to change.
After trying many many I just don't seem to work. I think I never got in the Bootloader mode (hold Camera button + power button and then press the reset button) but when I do this my screen just turns black and nothing happens.
If I try to start up everytime I get the startup wizard with pen calibration. Then he goes to windows and starts with the customization untill the screen goes black again and I can't do anything. If I want to powerup again I need to slide the battery cover back and forth and then I can powerup again. Only just to get the startup wizard again.
Please help me with this. I'm going crazy with trying and trying.
Cheers,
Veek

After more searching and trying I finally got the HTCMAG_ROM_WWE_O3 from Cotulla installed. Only my radio isn't the good version.
So trying to go back to older rom with good radio and then install HTCMAG_ROM_WWE_O3 again.
And I think with I-mate the bootloader is just a black screen. I still keep getting a black screen when I try to acces bootloader mode.
Cheers,
Veek

bootloader mode on htc magician marked with a black screen and there are writings SERIAL or USB (if connected with USBSync) at the top center of the screen, while the bottom of the screen are made V1.xx (bootloader version)...

I think i have your same problem! it keeps rebooting and everytime i try to install a new radio version it turns to boot mode (or almost that should be usb + 1.0 ) and nothin happens... i want to give him life back! =(

Geko90 said:
I think i have your same problem! it keeps rebooting and everytime i try to install a new radio version it turns to boot mode (or almost that should be usb + 1.0 ) and nothin happens... i want to give him life back! =(
Click to expand...
Click to collapse
try reflash Radio Rom again ! for smooth and successful flashing process should remove the SIM card from your device
Installation:
- Extract files Radio Rom
- Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
- Connect via USB to PC
- Run MaUpgradeUt_noID.exe
- Follow instructions in Update program.
- At the end you should see at device screen: "100% Upgrade Radio Image Complete".
- After flashing press reset.

Hakim Rahman said:
try reflash Radio Rom again ! for smooth and successful flashing process should remove the SIM card from your device
Installation:
- Extract files Radio Rom
- Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
- Connect via USB to PC
- Run MaUpgradeUt_noID.exe
- Follow instructions in Update program.
- At the end you should see at device screen: "100% Upgrade Radio Image Complete".
- After flashing press reset.
Click to expand...
Click to collapse
I'm trying to do this, but something's wrong... when I run maupgradeut_noID.exe the window says the ppc has to be connected via usb and synced with active sync... issues start after clicking on "Upgrade", because the phone goes in boot mode and nothing more happens... only that less than a minute later the pc loses connection of the phone =(

Geko90 said:
I'm trying to do this, but something's wrong... when I run maupgradeut_noID.exe the window says the ppc has to be connected via usb and synced with active sync... issues start after clicking on "Upgrade", because the phone goes in boot mode and nothing more happens... only that less than a minute later the pc loses connection of the phone =(
Click to expand...
Click to collapse
if so, then try to disable connections Ms. ActiveSync on your PC
open Ms ActiveSync --> File --> Connection Settings --> do not check column Allow USB connections

Hakim Rahman said:
if so, then try to disable connections Ms. ActiveSync on your PC
open Ms ActiveSync --> File --> Connection Settings --> do not check column Allow USB connections
Click to expand...
Click to collapse
I'm going to try it! Finger crossed for me xD
tryed... if I uncheck "usb connection", the pc doesn't recognize the ppc at all =(
that's what I get when trying to upgrade radio or rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I sync it it shows me the pocketpc disk in "computer" and I can explore it... is it someway useful? also, when synced, I get this window (trying to update):
now... do you think there is still some possibility for my magician to wake up from this long sleep?
THANKS

Geko90 said:
I'm going to try it! Finger crossed for me xD
tryed... if I uncheck "usb connection", the pc doesn't recognize the ppc at all =(
that's what I get when trying to upgrade radio or rom
If I sync it it shows me the pocketpc disk in "computer" and I can explore it... is it someway useful? also, when synced, I get this window (trying to update):
now... do you think there is still some possibility for my magician to wake up from this long sleep?
THANKS
Click to expand...
Click to collapse
even if you uncheck the " usb connection " and the pc does not recognize the device, however the upgrade process is still running

Hakim Rahman said:
even if you uncheck the " usb connection " and the pc does not recognize the device, however the upgrade process is still running
Click to expand...
Click to collapse
Hi,
i'm experiencing the same problem. I have never been able to access the bootloader by pressing those 3 buttons. The device just freezes and i need to remove the battery in order to reset it. Others also have experienced the same problem. Why won't the bootloader show up?

Softbricked my Oppo R7 Plus

I tried to root my phone with oppotools apk version 1.6.5. It showed finishing rooting ad status was 100% but it stuck there for about half an hour. Here, i rebooted it but now its stuck into oppo boot logo. I am not able to use fastboot. I factory reset my phone and cleared the cache and data from recovery mode but its still stuck on the oppo logo when i try to reboot it.
Can you please help me to get my phone back in working conditions?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
unbrick rom for oppo r7 plus M
My phone "loader mode" passed the section.
does not turn on my phone
I have to please help me.
"fastboot mode" and "recovery mode" phone is not switched on.

erdemmetin said:
unbrick rom for oppo r7 plus M
My phone "loader mode" passed the section.
does not turn on my phone
I have to please help me.
"fastboot mode" and "recovery mode" phone is not switched on.
Click to expand...
Click to collapse
WHat program is that???

marlinsters said:
WHat program is that???
Click to expand...
Click to collapse
qfil or miflash or toolstudio...
This is not important for me.
You worked enough on my phone.

1. Download and extract my RAR files ---> HERE
2. Open your PC device manager
3. Connect an usb cable only to your pc then press and hold the phone volume + button and then connect the usb cable to the phone
3. In the device manager you will see Qhsub_bulk then release the volume+ button
4. Right click on Qhsub_bulk and choose update driver
5. Use one of the driver folders which you alredy extract to install the Qualcomm driver and you will see it like 9008
6. Your phone have to be charged very well for a few hours before you try to flash it.
7. Remove it from the charger then connect an usb cable only to your pc.
8. Try to press and hold the volume + and power buttons at the same time for a few seconds and connect the usb cable to the phone.
9. You have to see the driver in the device manager like 9006 (you can release the buttons) [it wasn't easy for me so keep trying]
10. Open the MSMDownloader and press start
11. If everything is ok you will see a green progress bar flashing. (I was stuck here with the "NON-HLOS.bin" file which you can see in the "Other NON-HLOS File" folder inside the rom which you download)
12. When the process complete in about 10 minutes you can remove the usb cable from your phone.
13. Now you have to do a veeeeeeeery long press and hold on your power button untill you feel the vibration and after that you will see the OPPO logo.
14. Leave it for 5-10 minutes to load the Color OS.
15. Ok you have a working phone but still some apps icons that are missing and the keyboard doesn't appear when you have to write something.
16. Download THIS zipped ROM and put it in the internal storage of your phone.
17. Shut down the phone then press and hold the volume - and the power button at the same time for a while intil you enter into recovery mode.
18. Choose english and then install rom from zip file. After the installation complete reboot the phone and you will get a working keyboard and few more apps like Browser, Chinese market and else....
For me i still need to insert the IMEI's because they are lost... and now i have message: Oppo nv backup. The NV partition is invalid...
Good luck to all! And if you want to give me a beer: paypal: [email protected]

Samsung Galaxy S7 - dm-verity verification failed - can't Odin.

Hello all,
I was wondering if someone would be able to provide any guidance on my issue.
Last night I went to uninstall root and so I used the SuperSU app - and hit the Unroot option - phone restarted and is now stuck in bootloop. I have tried to restore the original firmware via Odin, however the phone does not get detected. I have explored the possibility of a driver issue of some sort as my PC will detect the phone if it's powered off and connected. It detects it as an MTP device. When I try use the Volume Up + Home + Power button to access download mode the phone does not detect, and my PC does not show any device connected to it. I have tried Kies3 and a reinstallation of the Samsung drivers but Odin still does not recognise it.
When I start my phone up using VolUp+Home+PWR mode my phone looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: IMG Links don't seem to work, click to view. http://imgur.com/a/bDgyf
Apologies for the potato quality camera, it was taken on my tablet. The yellow header text says:
"Android Recovery
MMB29K.G930FXXS1APG3
samsung/heroltexx/herolte
6.0.1/MMB29K/G930FXXS1APG
user/release-keys
Use volume up/down and power."
1. Reboot system now - this puts me in bootloop if used
2. Reboot to bootloader - bootloop as above
3. Apply Update from ADB - Update from external storage is disabled
4. Apply Update from SD Card - Update from external storage is disabled
5. Wipe data/factory reset - Works OK
6. Wipe Cache Partition - Works OK
7. Mount /system - Mounted /system - have tried mounting system then rebooting, however bootloop still.
8. View Recovery Logs - OK
9. Power OFF - OK
I would appreciate any advice on how to resolve this issue, I think that if I can get it to interface with Odin I might be able to restore. TIA.

s7cn said:
Hello all,
I was wondering if someone would be able to provide any guidance on my issue.
Last night I went to uninstall root and so I used the SuperSU app - and hit the Unroot option - phone restarted and is now stuck in bootloop. I have tried to restore the original firmware via Odin, however the phone does not get detected. I have explored the possibility of a driver issue of some sort as my PC will detect the phone if it's powered off and connected. It detects it as an MTP device. When I try use the Volume Up + Home + Power button to access download mode the phone does not detect, and my PC does not show any device connected to it. I have tried Kies3 and a reinstallation of the Samsung drivers but Odin still does not recognise it.
When I start my phone up using VolUp+Home+PWR mode my phone looks like this:
EDIT: IMG Links don't seem to work, click to view. http://imgur.com/a/bDgyf
Apologies for the potato quality camera, it was taken on my tablet. The yellow header text says:
"Android Recovery
MMB29K.G930FXXS1APG3
samsung/heroltexx/herolte
6.0.1/MMB29K/G930FXXS1APG
user/release-keys
Use volume up/down and power."
1. Reboot system now - this puts me in bootloop if used
2. Reboot to bootloader - bootloop as above
3. Apply Update from ADB - Update from external storage is disabled
4. Apply Update from SD Card - Update from external storage is disabled
5. Wipe data/factory reset - Works OK
6. Wipe Cache Partition - Works OK
7. Mount /system - Mounted /system - have tried mounting system then rebooting, however bootloop still.
8. View Recovery Logs - OK
9. Power OFF - OK
I would appreciate any advice on how to resolve this issue, I think that if I can get it to interface with Odin I might be able to restore. TIA.
Click to expand...
Click to collapse
Hi mate
Unroot sometimes fails..as you noticed....to fix it you have to get into download mode , sometimes is tricky , keep trying until you get it , is a timing issue ( boot image is corrupted ) , just try several times...once in , flash stock firmware......

MAX 404 said:
Hi mate
Unroot sometimes fails..as you noticed....to fix it you have to get into download mode , sometimes is tricky , keep trying until you get it , is a timing issue ( boot image is corrupted ) , just try several times...once in , flash stock firmware......
Click to expand...
Click to collapse
Thanks for your reply Max, I have tried Vol Up + PWR + Home countless times however it always ends up on that screen (in the screenshot). Any ideas?

s7cn said:
Thanks for your reply Max, I have tried Vol Up + PWR + Home countless times however it always ends up on that screen (in the screenshot). Any ideas?
Click to expand...
Click to collapse
It does not show any images ( screenshots) , upload them again...

MAX 404 said:
It does not show any images ( screenshots) , upload them again...
Click to expand...
Click to collapse
They can be seen here:
http://imgur.com/a/bDgyf Picture 2.
Thanks.

s7cn said:
They can be seen here:
http://imgur.com/a/bDgyf Picture 2.
Thanks.
Click to expand...
Click to collapse
Mate
You are in recovery mode....try this time with volume down instead

USB Jig could work if you can get the phone powered off

MAX 404 said:
Mate
You are in recovery mode....try this time with volume down instead
Click to expand...
Click to collapse
Thanks Max, solved my issue and was able to flash original ROM back on via Odin!

s7cn said:
Thanks Max, solved my issue and was able to flash original ROM back on via Odin!
Click to expand...
Click to collapse
Great to know
Thanks for letting us know