Related
Hello,
i've tried to backup the EFS Partition of my new Galaxy S3 with EFS Pro v1.8.3. My Busybox version is 1.20.2.
While trying to backup I get the following error:
Code:
Checking Device Connection... Device Connected!
Checking ROOT Access... Okay.
Backing Up Device's '/efs' Folder, Please Wait...
Detected '/efs' Partition Location: mountpoint: /factory: Not a
Creating EFS Backup Partition Image...
Verifying MD5 Checksum... Failed!
Device MD5 Hash: md5sum: can't open 'mountpoint:'
Backup Data MD5 Hash: md5sum: can't open '/sdcard/EFSP
Error: MD5 Checksum Mismatch!!!
DO NOT USE THIS BACKUP!!!
Operation Finished!
Device-Info:
Code:
Device Manufacturer: SAMSUNG
Device Model: GT-I9300
ROM Build: m0xx-user 4.0.4 IMM76D I9300XXALE8 release-keys
Android Version: 4.0.4
BusyBox Version: 1.20.2-Stericson
SU Binary Version: 0.91:SUPERSU
I tried to post in the EFS Pro Thread, but I don't have ther permission to.
So maybe you can help me here?
Yours
Cryptomaniac
I also get this too!
I have the same problem:
Device Manufacturer: SAMSUNG
Device Model: GT-I9300
ROM Build: m0xx-user 4.0.4 IMM76D I9300XXALE8 release-keys
Android Version: 4.0.4
BusyBox Version: 1.20.2-Stericson
SU Binary Version: 0.93:SUPERSU
This error shows up when I choose the img format: (on local and device backup path)
Checking Device Connection... Device Connected!
Checking ROOT Access... Okay.
Backing Up Device's '/efs' Folder, Please Wait...
Detected '/efs' Partition Location: mountpoint: /factory: Not a
Creating EFS Backup Partition Image...
Verifying MD5 Checksum... Failed!
Device MD5 Hash: md5sum: can't open 'mountpoint:'
Backup Data MD5 Hash: md5sum: can't open '/sdcard/EFSP
Error: MD5 Checksum Mismatch!!!
DO NOT USE THIS BACKUP!!!
Operation Finished!
When I choose the tar format or disable the MD5 check the procedure runs through but only creates a faulty file with about 4k size:
Checking Device Connection... Device Connected!
Checking ROOT Access... Okay.
Backing Up Device's '/efs' Folder, Please Wait...
Detected '/efs' Partition Location: mountpoint: /factory: Not a
Creating EFS Backup Partition Image...
Copying EFS Backup To PC Storage... Okay.
Copied: remote object '/sdcard/EFSProBackup/EFS_201275_185620.img' does not exist
Deleting Temporary EFS Backup From Device... Okay!
Operation Finished!
any help is much appreciated
the new version fixed the problem for me
EFS Pro v1.8.6 has now been released!
Improved Nexus S / Galaxy Nexus Support and fixed the bug that caused the detection of the partition location to fail for some devices
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1308546
I am facing some issues with my Galaxy Note, I can't write in EFS Pro thread too. I backup my efs with EFS Pro. Now my imei become null and baseband unknown because of flashing roms. I can't restore backup, it show mount point error. Someone help me.
EFS Pro 2.0.12: Unable to Create Archive
I am a new user to EFS Pro, and am using v2.0.12. I tried other older versions, and am getting the same error, and that is when I start the backup, I get an error that it cannot create the archive.
My S3 Tmobile (SGH-T999) is rooted and currently running CM10.1 1/24 nightly. I also enabled USB & ADB debugging. The program accesses the phone OK, it seems that the problem is just in the final saving of the file.
I thought perhaps it was a permission issue with the program not being able to write to my disk, however I have it running with Administrator privileges. I'm stumped. Oh and my O/S is Windows 7 Pro, 64-bit.
grogargh said:
I am a new user to EFS Pro, and am using v2.0.12. I tried other older versions, and am getting the same error, and that is when I start the backup, I get an error that it cannot create the archive.
My S3 Tmobile (SGH-T999) is rooted and currently running CM10.1 1/24 nightly. I also enabled USB & ADB debugging. The program accesses the phone OK, it seems that the problem is just in the final saving of the file.
I thought perhaps it was a permission issue with the program not being able to write to my disk, however I have it running with Administrator privileges. I'm stumped. Oh and my O/S is Windows 7 Pro, 64-bit.
Click to expand...
Click to collapse
I have the same problem. Help please. Thanks!
Edit: solved the problem downgrading busybox to the latest stable version.
BrMBr said:
I have the same problem. Help please. Thanks!
Edit: solved the problem downgrading busybox to the latest stable version.
Click to expand...
Click to collapse
I have the same issue, but the busybox change didn't help
Device Info:
---------- Hardware Information ----------
Connected Device SN.: 3832E63FECEC00EC
Device Manufacturer: SAMSUNG
Device Model: GT-I9000
Product Code: GT-I9000HKDKOR
Hardware Version: MP 0.800
---------- Firmware Information ----------
PDA Version: I9000XXJVQ
Baseband Version: I9000XXJVQ
CSC Version: I9000OXAJVQ
---------- Software Information ----------
Kernel Release: 2.6.35.7-I9000XXJVQ-CL281085
Kernel Version: #DarkCore_2.9.2_JVQ PREEMPT Sat Jul 23 19:19:57 EEST 2011
ROM Build: GT-I9000-user 2.3.4 GINGERBREAD XXJVQ release-keys
Android Version: 2.3.4
BusyBox Version: 1.20.0-Stericson
SU Binary Version: 2.3.1-ef
LOG
Checking device connection... Device is connected!
Checking for block device: '/dev/block/mmcblk0'... Okay.
Extracting PIT from device for mapping... Okay.
Checking backup folder location... Okay.
Backing up selected partition(s)...
Creating archive: GT-I9000_201366_154523.tar.gz...
Operation failed!
Any Idea ?
I have been trying to backup the efs folder on Samsung galaxy Music GT-S6010 using EFS Professional v2.0.62 and when the software is "Extracting PIT from device for mapping ..." it shows "operation failed" and gives a prompt showing it was "Unable to extract PIT from device!".
I have attached a screenshot of the issue, anyone kindly help.
Similar problem on Galaxy S GT I9000, MORE DETAILS given
Hello,
I have a problem with EFS Professional. I searched the development thread (http://forum.xda-developers.com/showthread.php?t=1308546) and googled it as well. Although some solutions were offered my problem is not solved. I am not a complete newbie but not an expert either, so maybe I have a really simple issue here?
I am simply trying to backup the EFS partition on Samsung Galaxy S GT I9000.
The problem in short:
1. All seems to be well on welcome tab.
2. While running the backup, I get “Unable to read PIT file!” and the process stops.
3. If I run it again it skips the PIT file part saying “Skipped, already exists.” And then a popup shows saying “unable to create archive!”
4. Note: a tar.gz file is actually created and placed in a new EFSProBackup folder on the phone under /mnt/sdcard. The size of this file is only 29 Bytes and I think its basically an empty file).
Note that I did change my Busybox to version 1.20.0.git (but not 1.20.0 if it makes any difference?) as was suggested).
Can anyone help?
Please see a detailed description below.
Many thanks!
Detailed description:
• Using Windows XP
• EFS Professional 2.0.70
• Busybox 1.20.0.git
• Samsung USB Driver: 1.5.27.0_2
• Firewall – OFF
• USB Debugging – ON
• Mass Storage – OFF (I tried it with Mass Storage ON as well and it gives only the result as in step 2 described above no matter how many times I run it)
• Unknown Sources (if at all relevant) – ON
• Allow mock locations (if at all relevant) - ON
EFS Professional selections, logs & popups:
Welcome tab:
Log:
Checking application environment... Okay.
Initializing ADB server... Okay.
-----------------------------------
Performing device checks...
-----------------------------------
Root status: Perm Rooted.
SU binary version: 3.1.1
-----------------------------------
BusyBox status: Installed.
BusyBox binary version: 1.20.0.git
-----------------------------------
EFS Professional is ready for use.
-----------------------------------
Backup tab:
• device filter set to “*** All Partitions ***”
• selected the (only) one EFS partition found: /dev/block/stl3
• Pressed Backup
Log:
Checking device connection... Device is connected!
Checking for block device: '/dev/block/mmcblk0'... Okay.
Extracting PIT from device for mapping... Okay.
Operation failed!
A popup comes up saying: “Unable to read PIT file!”
• When I press Backup again
Log:
Checking device connection... Device is connected!
Checking for block device: '/dev/block/mmcblk0'... Okay.
Extracting PIT from device for mapping... Skipped, already exists.
Checking backup folder location... Okay.
Backing up selected partition(s)...
Creating archive: GT-I9000_20130928_114424.tar.gz...
Operation failed!
A popup comes up saying: “Unable to create archive”
Efs backup
Try online Nandroid backup app. It will back up everything including the EFS folder.
Perfect!
It's so much simpler and works like a dream! I just hope it will work as promised if anything goes wrong while flashing a new ROM!
Many thanks for your reply!
:good:
backup IMEI on galaxy ace 2 i8610
Hello
I have the same problem with my galaxy ace 2 i8610
I get a popup shows saying “unable to create archive!”
Does anyone can help me ?
Thanks
---------- Post added at 03:38 AM ---------- Previous post was at 03:29 AM ----------
Hello
I have a galaxy ace 2 i8610 and when I try to backup on EFS pro 2.0.70, I get this message :
Checking device connection... Device is connected!
Checking for block device: '/dev/block/mmcblk0'... Okay.
Extracting PIT from device for mapping... Skipped, already exists.
Checking backup folder location... Okay.
Backing up selected partition(s)...
Creating archive: GT-I8160_20131105_101505.tar.gz...
Operation failed!
Does anyone can help me ?
Thanks[
efs professinal erorr!
hiii....I was backuping my efs or radio's data from tablet n8000 but today i see this erorr!!! my efsprofessinal is in c:\ and adb devicse is working!!please guide mi...tanks
Recently i was given an android device by a friend.. once i got to looking around at it, it appears to be some generic device from china.
After searching for days, i found the maker as fugetek. I emailed them asking for a release date on OS upgrade (from 4.1.1 -> kitkat) and was informed that " Updates are needed, and won't be made. "
Emailed them again asking for the source / project files they used to build the android OS for this device so i could update it myself...
Here is what they sent me:
(image attached)
As you can see.. these are hardly project files / source files, but rather a flashing tool, a set of " how to " doc's for flashing the device, and a compiled *.img
My Question:
1) Is it possible to extract / mount the img file, and manually upgrade the OS to kitkat witout losing any hardware functionality
2) If it is indeed possible to upgrade the android OS version using the img file as src, does anyone know of a step-by-step guide / tutorial on how this is done.
[EDIT] UPDATE: Seems the PheonixUSBPro flashing utility links to an " Alwinner " PDF when you click help..
I am assuming this is pretty much the same image being passed around by the chinese for their generic 7" Android Devices
From what i'm reading.. this is going to a fun, and somewhat convoluted project
Device Details:
Manufacturer: Fugitek Technologies / Lonestar Group:
Model: OCOCCI_MID
Android: 4.1.1
Baseband: jellybean
Kernel Version:
308+
[email protected] #206
Mon Nov 4 14:17:42 CST 2013
Build Number:
nuclear_pfdq88d-eng 4.2.2 JRO03C 20130913 test-keys
Any help would be most appreciated
If anyone requires the " source " zip they sent me, let me know, and i'll upload it somewhere for you.
I purchased a tablet for my kids to play Pokémon go, the issue is that authentication fails, I started to look into the issue and I ran root checker, it says your K107 is not rooted
Root Access:
No Access
SU:
su found
UID/GID:
uid=10078(u0_a78)
gid=10078(u0_a78)
groups=3003(inet),9997(everybody),50078(all_a78)
context=kernel
Utils:
toolbox
Path:
/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
Path:
/system/xbin/
Version:
/system/bin/sh: <stdin>[41]: /system/xbin//su: can't execute: Permission denied
Permissions:
rwsr-x---
Owner:
shell:67060
SELinux:
Disabled
I then ran Safety Net and it failed
Basic integrity and CTS Profile match.
This I think means that the bevice has access to the system files.
Because of this access Pokémon go, android pay and others will not authenticate access.
The tablet is a Beista 10.1 Android 5.1 (SDK 22)
Any ideas on how to fix this?
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
2k05gt said:
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
Click to expand...
Click to collapse
Unroot the device by opening Super app (if you don't have it, install it from Playstore), then open its app settings, find the setting that says "cleanup for Unroot and uninstall", this will remove the su binaries from system and uninstall the Super app. That will fully Unroot you and allow your apps to run.
Or you can leave it rooted and find a mod or app that hides root from those apps to let them run.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Unroot the device by opening Super app (if you don't have it, install it from Playstore), then open its app settings, find the setting that says "cleanup for Unroot and uninstall", this will remove the su binaries from system and uninstall the Super app. That will fully Unroot you and allow your apps to run.
Or you can leave it rooted and find a mod or app that hides root from those apps to let them run.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Unable to find Super App. but I have SuperSU it says that there is no binary installed.
I did root checker and It says system is not Rooted.
but when I use file explorer I am able to see the system files, (etc, system so on)
There is an app called SIM Toolkit (versioin 5.1-vKB095L) it wont run, says it's not installed, but it's in the application list as installed and running.
using root app deleter I see under system apps its located at /system/priv-app/stk1/stk1.apk
says its an official app optimized for current ROM
2k05gt said:
Unable to find Super App. but I have SuperSU it says that there is no binary installed.
I did root checker and It says system is not Rooted.
but when I use file explorer I am able to see the system files, (etc, system so on)
There is an app called SIM Toolkit (versioin 5.1-vKB095L) it wont run, says it's not installed, but it's in the application list as installed and running.
using root app deleter I see under system apps its located at /system/priv-app/stk1/stk1.apk
says its an official app optimized for current ROM
Click to expand...
Click to collapse
Yeah, autocorrect got me.
If there are no su binaries then you aren't rooted.
The SIM Toolkit is a stock system app, it is supposed to be there, it's not an app you can open or do anything with, it just runs in the background.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Yeah, autocorrect got me.
If there are no su binaries then you aren't rooted.
The SIM Toolkit is a stock system app, it is supposed to be there, it's not an app you can open or do anything with, it just runs in the background.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Well then I need to figure out what is causing SafetyNet to fail CTS Profile mismatch.
Both Pokemon Go and Android Pay will not Authenticate.
And why is it that I can see the System files?
2k05gt said:
Well then I need to figure out what is causing SafetyNet to fail CTS Profile mismatch.
Both Pokemon Go and Android Pay will not Authenticate.
Click to expand...
Click to collapse
Try reflashing stock firmware and start over from scratch.
Do a Google search for:
"Return to stock (your model number)"
If it's available for your model, that will find your stock firmware and instructions to flash it. Get it flashed and then reinstall the apps you're trying to get working.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:35 AM ---------- Previous post was at 11:19 AM ----------
2k05gt said:
Here is the Device Info...
BOARD: k107
BOOTLOADER: unknown
BRAND: BEISTA
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: k107
DISPLAY: K107_qwt-vKB095L_20170223
FINGERPRINT: BEISTA/k107/k107:5.1/LMY47I/20170223.183427:user/dev-keys
HARDWARE: mt6580
HOST: buildserver6
ID: LMY47I
MANUFACTURER: Jlinksz
MODEL: k107
PRODUCT: K960
SERIAL: 0123456789ABCDEF
TAGS: dev-keys
TYPE: user
USER: buildserver
CODENAME: REL
INCREMENTAL: vKB095L
RELEASE: 5.1
SDK_INT: 22
RADIO: MOLY.WR8.W1449.MD.WG.MP.V6.P13, 2016/01/27 09:53
Click to expand...
Click to collapse
I found this thread for your device, you can probably find the stock firmware to restore it somewhere in that thread. Use SP Flash tool to flash it. I saw a firmware linked there for K960 which I believe is your device.
http://www.chinaphonearena.com/forum/Thread-Question-How-to-root-JLINKSZ-K960-MTK6592-OR-T
I found this thread discussing alternative firmwares that might be used.
https://www.china-devices.com/forum...e-t950s-_tried-every-rom_still-bricked.20009/
In my experience, these cheap Chinese tablets aren't worth having because they have no product support whatsoever. These devices are actually knock-off trying to imitate/clone "real" devices.
I suggest you ditch that tablet and get something better.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Try reflashing stock firmware and start over from scratch.
Do a Google search for:
"Return to stock (your model number)"
If it's available for your model, that will find your stock firmware and instructions to flash it. Get it flashed and then reinstall the apps you're trying to get working.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:35 AM ---------- Previous post was at 11:19 AM ----------
I found this thread for your device, you can probably find the stock firmware to restore it somewhere in that thread. Use SP Flash tool to flash it. I saw a firmware linked there for K960 which I believe is your device.
http://www.chinaphonearena.com/forum/Thread-Question-How-to-root-JLINKSZ-K960-MTK6592-OR-T
I found this thread discussing alternative firmwares that might be used.
https://www.china-devices.com/forum...e-t950s-_tried-every-rom_still-bricked.20009/
In my experience, these cheap Chinese tablets aren't worth having because they have no product support whatsoever. These devices are actually knock-off trying to imitate/clone "real" devices.
I suggest you ditch that tablet and get something better.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I tried getting the kids Samsung Tablets, @ 250.00 each. busted then in a few months, I want a cheap tablet that will run Pokemon Go that if they break them its not breaking my wallet. nothing out there with 2gb system memory is under 120 bucks.
I found a FTP Site ftp://ftp.jlinksz.com/
Account: BMXC
Password: bmxcrjxz
I am really not sure what ROM is for My Device...
2k05gt said:
I found a FTP Site ftp://ftp.jlinksz.com/
Account: BMXC
Password: bmxcrjxz
I am really not sure what ROM is for My Device...
Click to expand...
Click to collapse
MODEL: k107
2k05gt said:
I purchased a tablet for my kids to play Pokémon go, the issue is that authentication fails, I started to look into the issue and I ran root checker, it says your K107 is not rooted
Root Access:
No Access
SU:
su found
UID/GID:
uid=10078(u0_a78)
gid=10078(u0_a78)
groups=3003(inet),9997(everybody),50078(all_a78)
context=kernel
Utils:
toolbox
Path:
/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
Path:
/system/xbin/
Version:
/system/bin/sh: <stdin>[41]: /system/xbin//su: can't execute: Permission denied
Permissions:
rwsr-x---
Owner:
shell:67060
SELinux:
Disabled
I then ran Safety Net and it failed
Basic integrity and CTS Profile match.
This I think means that the bevice has access to the system files.
Because of this access Pokémon go, android pay and others will not authenticate access.
The tablet is a Beista 10.1 Android 5.1 (SDK 22)
Any ideas on how to fix this?
Click to expand...
Click to collapse
Hello 2k05gt, I recently bought this device. I messed up with the launcher and now is stuck in the "Adnroid is starting, optimizing app" loop. When I enter to recovery mode, a screen pops up saying "No command". Perhaps no recovery is flashed? Do you happen to have the same issue? I am really pissed off because I don't know how to fix this.
Phone model: Lebast X14 Promax
Version number: T9312-G2233F-5G-20221201-V1104
Hardware version number: T9312
Baseband version: 4G_MODEM_20A_W21.50.2|sharkl5pro_modem, 4G_MODEM_20A_W21.50.2|sharkl5pro_modem
CPU model: snapdragon855
Number of CPU cores: 8 cores
RAM: 16G
ROM: 512G
Screen resolution: 1600x720
Operating System: FreemeOS
Android version: 11
This is the message displayed in "About phone"
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
It is said on the Internet that 5G is not supported, but this version is mainly based on 5G. Anyway, I tried to find a lot of Root methods, but unfortunately none of them work. May a root expert please give me a clear direction.
you got scammed bro wtf
w_tapper said:
你被騙了兄弟 wtf
Click to expand...
Click to collapse
Even if it is not 5G, I still want to root it and use it as other software.
May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.
jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
I'll try it out, thanks for sharing
Catbgm said:
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
Click to expand...
Click to collapse
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com
jwoegerbauer said:
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com
Click to expand...
Click to collapse
I opened it after installation, but jumped out.
jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
jwoegerbauer said:
May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.
Click to expand...
Click to collapse
Catbgm said:
I'll try it out, thanks for sharing
Click to expand...
Click to collapse
I open KernelSU after installation, but it shows
Unsupported
KernelSU now only supports GKI kernels
Core: 4.14.193
Admin version: v0.5.7(10866) Fingerprint:5G/T93115G:11/RP1A.201005.001/1669974822: user/release-keys SELinux state: Mandatory
Because the display is Unsupported, according to the above, you need to compile the kernel yourself.
I checked the unofficially supported devices and saw a similar version number, but there is only one digit difference.
rushiranpise
android_kernel_samsung_exynos9610_mint
Kernel 4.14.194 exynos9610 non-GKI device, added KernelSu using manual method
Would it be more appropriate to use this?
Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .
If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.
jwoegerbauer said:
Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .
Click to expand...
Click to collapse
In fact, I have installed the magisk, just on the installation, I don’t know how to proceed, I need to select and repair the file, but this phone does not have a file for flashing the phone like a big brand, I also tried to go to the file in the phone I searched for boot-related files and tried to patch and install them, but they couldn’t be installed. I tried to install the magisk in a virtual machine, but even if it was installed, I still need to patch the files to get full permissions.
jwoegerbauer said:
If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.
Click to expand...
Click to collapse
In fact, I want to install the software to get cracked and get restricted functions.
.
@Catbgm
Here you go - Notice: I've not tested it.
Using your phone
A:
Open browser
1. Install SH Script Runner
2. Download Buysbox
Close browser
B:
Open SH Script Runner
1. Create shell script what contains these lines of code
Code:
#!/bin/bash
CPU64=$(cat /proc/cpuinfo | grep 'ARMv8')
if [[ -z "$CPU64"]] ; then
CPU="arm"
else
CPU="arm64"
fi
BB="/data/local/tmp/bb"
mkdir -p -m 777 $BB
cp /sdcard/Download/busybox_1_34_1_ARM/$CPU/bin/* $BB/
rm -r /sdcard/Download/busybox_1_34_1_ARM
mv $BB/busybox $BB/bb
chmod -R u=rwx,g=r,o= $BB/*
alias SU="$BB/bb su"
echo "Testing SU functionality..."
sleep 15 && echo -en '\007'
whoami
echo ""
$($SU)
echo ""
whoami
echo "All done."
sleep 15
exit 0
2. Run the script
C:
Close SH Script Runner