Related
Tt
reset
The only way to reset is "unroot"
Same as me, you must unroot.
moliverac8 said:
Same as me, you must unroot.
Click to expand...
Click to collapse
how do i unroot it?
shpeckoff said:
how do i unroot it?
Click to expand...
Click to collapse
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
Click to expand...
Click to collapse
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
---------- Post added at 07:21 PM ---------- Previous post was at 06:50 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
Click to expand...
Click to collapse
Get odin 1.85 here http://rootzwiki.com/topic/32155-guide-tab-2-101-and-70-rootingcwmroms/page__hl__+unroot++gt++p3110 use the sammobile file you dowloaded, not theirs, (wrong file) follow instructions section E
Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!
shpeckoff said:
Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!
Click to expand...
Click to collapse
When you you root you replace stock files and add some new files that are detected by the installation process of the OTA updates. This sets a flag to block further updates from Samsung. You can still update by restoring to stock then getting the updates then rooting again, but OTAs will not be automatically delivered to your device while its rooted.
So before I installed Cyogenmod months ago I forgot to backup everything but I didn't think it mattered as everything was running smooth. I try to update to a nightlybuild that was in my settings and TWRP said it failed. Every single time I tried to reboot or factory reset I would constantly go back to the TWRP screen. I've tried drag and dropping multiple roms onto the phone, find it and 'swipe to confirm flash' but it ALWAYS says fail no matter what. And when I try to go to reboot it says 'WARNING: No OS found.' I've been trying all day and I literally need this phone to work but nothing I do is helping. Please help? Or ask any questions you guys need to know.:crying::crying::crying:
How bout the specs on that phone?
Model, link me to the phone here on xda, link me to the support page of your manufacturers website, etc.
Sounds like a partitioning issue.
jjc09081989 said:
So before I installed Cyogenmod months ago I forgot to backup everything but I didn't think it mattered as everything was running smooth. I try to update to a nightlybuild that was in my settings and TWRP said it failed. Every single time I tried to reboot or factory reset I would constantly go back to the TWRP screen. I've tried drag and dropping multiple roms onto the phone, find it and 'swipe to confirm flash' but it ALWAYS says fail no matter what. And when I try to go to reboot it says 'WARNING: No OS found.' I've been trying all day and I literally need this phone to work but nothing I do is helping. Please help? Or ask any questions you guys need to know.:crying::crying::crying:
Click to expand...
Click to collapse
For Samsung phone:
Go download mode and flash a ROM through ODIN.
For non-Samsung devices:
Flash a ROM from SD-Card.
Smack that Thanks button if I helped!
XDAing from a N7105 powered by Illusion ROM.
Sent from a small country called Singapore.
P.S. Time for school, not much time for XDA
Lgrootnoob said:
How bout the specs on that phone?
Model, link me to the phone here on xda, link me to the support page of your manufacturers website, etc.
Sounds like a partitioning issue.
Click to expand...
Click to collapse
It's not letting me post but my phone is the HTC EVO 4G LTE
jjc09081989 said:
It's not letting me post but my phone is the HTC EVO 4G LTE
Click to expand...
Click to collapse
First, flash to stock based on carrier.
Taken straight from an xda forum post for the sprint model Here is a page that has the stock ruu's use the one at the bottom of the list.
http://www.androidruu.com/index.php?developer=Jewel
Second, fastboot flash the latest twrp img for your evo. (Or however you got it on there in the first place.)
Last, get back to cm or whatever rom you want using the way that you originally got there.
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
Or just follow this tutorial.
Then get back to custom stuff the way you originally did it.
Lgrootnoob said:
First, flash to stock based on carrier.
Taken straight from an xda forum post for the sprint model Here is a page that has the stock ruu's use the one at the bottom of the list.
http://www.androidruu.com/index.php?developer=Jewel
Second, fastboot flash the latest twrp img for your evo. (Or however you got it on there in the first place.)
Last, get back to cm or whatever rom you want using the way that you originally got there.
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
Or just follow this tutorial.
Then get back to custom stuff the way you originally did it.
Click to expand...
Click to collapse
it's saying "the ROM update cannot update please get the correct rom update utility and try again." please help because I believe this will be the thing that gets my phone up and running again
jjc09081989 said:
it's saying "the ROM update cannot update please get the correct rom update utility and try again." please help because I believe this will be the thing that gets my phone up and running again
Click to expand...
Click to collapse
I have samsung phones, your sol.
Just kidding, I have one htc phone. (Dinc 2)
Which tutorial did you follow?
---------- Post added at 08:22 PM ---------- Previous post was at 08:17 PM ----------
Give me about 15 minutes, I'm working on a fix for you.
Have fastboot ready.
---------- Post added at 09:03 PM ---------- Previous post was at 08:22 PM ----------
I found a fix, just load an updated twrp with Fastboot and flash an OS.
Lgrootnoob said:
I have samsung phones, your sol.
Just kidding, I have one htc phone. (Dinc 2)
Which tutorial did you follow?
---------- Post added at 08:22 PM ---------- Previous post was at 08:17 PM ----------
Give me about 15 minutes, I'm working on a fix for you.
Have fastboot ready.
---------- Post added at 09:03 PM ---------- Previous post was at 08:22 PM ----------
I found a fix, just load an updated twrp with Fastboot and flash an OS.
Click to expand...
Click to collapse
I'm on the Recovery screen and it says ***Tampered***
***Relocked***
***Security warning***
jewel pvt ship s-on RL
HBOOT-1.15.0000
radio- 1.05.11.0606
opendsp-v25.1.0.32.0405
emmc-boot
I am trying to use windroid but I am lost with this as well.
jjc09081989 said:
I'm on the Recovery screen and it says ***Tampered***
***Relocked***
***Security warning***
jewel pvt ship s-on RL
HBOOT-1.15.0000
radio- 1.05.11.0606
opendsp-v25.1.0.32.0405
emmc-boot
I am trying to use windroid but I am lost with this as well.
Click to expand...
Click to collapse
You need s-off
then you can flash recovery.
Lgrootnoob said:
You need s-off
then you can flash recovery.
Click to expand...
Click to collapse
How do I get it back to unlocked? I ****ed around and thought locking it would help me but obviously it did not. I really appreciate all of the help so far!
Try this.
Lgrootnoob said:
Try this.
Click to expand...
Click to collapse
That didn't show me anything lol just him doing it all on his phone and there's no description so I don't know what he just did. Plus I can't even get to my home screen I have no OS whatsoever.Stuck on recovery.
jjc09081989 said:
That didn't show me anything lol just him doing it all on his phone and there's no description so I don't know what he just did. Plus I can't even get to my home screen I have no OS whatsoever.Stuck on recovery.
Click to expand...
Click to collapse
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.
Lgrootnoob said:
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.
Click to expand...
Click to collapse
Oh okay I see it I'm sorry I went directly to the youtube video. Where would I put those text codes into though? In windroid?
Lgrootnoob said:
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.
Click to expand...
Click to collapse
I appreciate everything so far, just one more thing though if you don't mind. This page, those 'codes.' Where do I put them? Like..under where?
jjc09081989 said:
I appreciate everything so far, just one more thing though if you don't mind. This page, those 'codes.' Where do I put them? Like..under where?
Click to expand...
Click to collapse
At the Windows command prompt, using the fastboot binary at bootloader mode with a usb cable connected and the proper htc drivers installed which can be found in xda forum for your device. :silly:
Hey im trying to upgrade my htc inspire to lollipop through cwm recovery and keep getting installation aborted msg help
bobbymd said:
Hey im trying to upgrade my htc inspire to lollipop through cwm recovery and keep getting installation aborted msg help
Click to expand...
Click to collapse
Fix it?
Sent from my MB886 using Tapatalk
Based on the information you gave in another post, I believe your new micro SD is screwed up. Replace your micro SD and see if that helps with updating recovery and CM.
Troll?
marknoll said:
Troll?
Click to expand...
Click to collapse
ok my bad. it was not a troll. he started the thread. i will fix it. thanks.
No..I was meaning by "what you mean,troll?"lol
---------- Post added at 09:48 AM ---------- Previous post was at 09:47 AM ----------
I don't think SD card has anything to do with a recovery. Recoveries are flashed to the phones partition. Not an SD card
marknoll said:
No..I was meaning by "what you mean,troll?"lol
---------- Post added at 09:48 AM ---------- Previous post was at 09:47 AM ----------
I don't think SD card has anything to do with a recovery. Recoveries are flashed to the phones partition. Not an SD card
Click to expand...
Click to collapse
Now that you said it, I am stuck with CM 12.1 and want to go back to stock. I think I tried everything out there on this website to get it back but I cannot flash stock ROM successfully. Any ideas on how I get to my stock AT&T 2.3.5 ROM? I have TWRP 2.8.6.1 recovery up and running smoothly and can connect using fastboot/adb (although intermittently because asus hardware of my pc intermittently acts up and refuses to detect my inspire). Many thanks!
First off you have to lock your boot loader then you can run the latest ruu
---------- Post added at 04:14 PM ---------- Previous post was at 04:09 PM ----------
http://www.htc.com/us/support/htc-inspire-4g-att/news/
You won't lose s off when you run this..to have phone be seen by PC (with the 5.0 android version you have) you must use SDK. Make sure your SDK is updated to 5.0+ versions. After that,to access bootloader,you must open platform tools folder in SDK and hold shift,right click mouse and choose open cmd here...cmd window "fastboot devices" if PC sees it,run ruu
---------- Post added at 04:17 PM ---------- Previous post was at 04:14 PM ----------
People tend to misunderstand that you can use SDK to access your phone. Especially if the computer does not see the devices drivers
---------- Post added at 04:19 PM ---------- Previous post was at 04:17 PM ----------
Once your device is back to stock, you can always unlock the bootloader again with HTC dev website
aaarrggh.. stupid me. I should've thought about locking the device. This is what happens with inexperience and jumping bandwagon in the middle. anyways. I rolled back now thankfully. Many thanks!! I have s-on so i dont think that matters. I don't think i will go through htcdev for unlocking it again because the whole point behind upgrading to 5.1.1 CWM was to use hangouts and dialer function. that is not working, so i guess i will just patiently wait for google to support GB (UNLESS YOU HAVE A BETTER SUGGESTION?????)
Development for Gingerbread has stopped if you want a decent ROM, try Cream Sandwich
marknoll said:
Development for Gingerbread has stopped if you want a decent ROM, try Cream Sandwich
Click to expand...
Click to collapse
Can you suggest a ROM and the link that I can download it from? I am hoping I can use Hangouts Dialer on ICS given it is 4.0+ ROM. If you know it won't run Hangouts Dialer, I dont want to even bother. Many thanks!
http://forum.xda-developers.com/showthread.php?t=2334107
Odin says i need a pit file to flash the original recovery onto the phone.
But I cant find this PIT file anywhere on the internet, please if anyone can get this PIT file for this MODEL i would greatly appreciate it!
http://ir-file.com/?p=Firmware/samsung/original/s-series/sm-s906l/sm-s906l_pit
Sent from my SM-G920W8 using Tapatalk
---------- Post added at 18:36 ---------- Previous post was at 18:34 ----------
You probably shouldn't be posting on a million sites & pages. Found this with a Google search in 10 minutes.
Sent from my SM-G920W8 using Tapatalk
Dude wtf
DarryDoo said:
http://ir-file.com/?p=Firmware/samsung/original/s-series/sm-s906l/sm-s906l_pit
Sent from my SM-G920W8 using Tapatalk
---------- Post added at 18:36 ---------- Previous post was at 18:34 ----------
You probably shouldn't be posting on a million sites & pages. Found this with a Google search in 10 minutes.
Sent from my SM-G920W8 using Tapatalk
Click to expand...
Click to collapse
That costs money to download.
I need it for free!
chocolote4444 said:
That costs money to download.
I need it for free!
Click to expand...
Click to collapse
$20 to fix your phone. Sounds pretty cheap.
See how much it costs from a repair shop.
Sent from my SM-G920W8 using Tapatalk
Connect phone to your PC in download mode and do "firmware rescue" via Smart Switch.
Nevermind! I fixed it!!!!!!
chocolote4444 said:
Nevermind! I fixed it!!!!!!
Click to expand...
Click to collapse
Care to elaborate, so others can benefit from your success?
Sent from my SM-G920W8 using Tapatalk
What do you mean?
I added the correct pit file and was able to flash the original recovery.img into the phone
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfone wireless screen..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
---------- Post added at 07:22 AM ---------- Previous post was at 07:22 AM ----------
chocolote4444 said:
I added the correct pit file and was able to flash the original recovery.img into the phone
Click to expand...
Click to collapse
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfon..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
Dreysus said:
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfone wireless screen..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
---------- Post added at 07:22 AM ---------- Previous post was at 07:22 AM ----------
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfon..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
Click to expand...
Click to collapse
Was your phone rooted before it got bricked? Also, I can help you, but you will a custom recovery if your phone is rooted.
chocolote4444 said:
Was your phone rooted before it got bricked? Also, I can help you, but you will a custom recovery if your phone is rooted.
Click to expand...
Click to collapse
I have this same phone......rooted. Can use your help. I want flash any working verizon rom. But more importantly I want to know how to recover from a brick..............
Noticed you were able to recovery from a brick......with Odin? Curious how. I tried to flash a stock Verizon rom, while rooted with ODIN, and pit file.......but it fails.
I am nervous of trying to flash TWRP and custom rom, if I don't know of a full proof recovery method.
Any help is much appreciated.
Thanks
Lucky Day
poog said:
I have this same phone......rooted. Can use your help. I want flash any working verizon rom. But more importantly I want to know how to recover from a brick..............
Noticed you were able to recovery from a brick......with Odin? Curious how. I tried to flash a stock Verizon rom, while rooted with ODIN, and pit file.......but it fails.
I am nervous of trying to flash TWRP and custom rom, if I don't know of a full proof recovery method.
Any help is much appreciated.
Thanks
Click to expand...
Click to collapse
Here's the link to stock firmware. Just load into odin and flash.
http://*******/1fuJAE
Dreysus said:
Here's the link to stock firmware. Just load into odin and flash.
http://*******/1fuJAE
Click to expand...
Click to collapse
Dude that link doesn't work
New Link
https://mega.nz/#!coQzVaoL!OxkuLxfqFsowAd82Yo51C2oKbSg7lcDQMPGeOWb_3e8
Dreysus said:
https://mega.nz/#!coQzVaoL!OxkuLxfqFsowAd82Yo51C2oKbSg7lcDQMPGeOWb_3e8
Click to expand...
Click to collapse
Last question, does that stock contain the modem (modem.bin)? My phone is unbricked but the EFS is messed up because I flashed a marshmallow update via TWRP and did not backup my EFS. I eventally had to restore my original 5.0.2 stock rom.
chocolote4444 said:
Last question, does that stock contain the modem (modem.bin)? My phone is unbricked but the EFS is messed up because I flashed a marshmallow update via TWRP and did not backup my EFS. I eventally had to restore my original 5.0.2 stock rom.
Click to expand...
Click to collapse
Password is required? Is it possible to get it?
beehivemx said:
Password is required? Is it possible to get it?
Click to expand...
Click to collapse
Yes you can get the file without the need of a password
chocolote4444 said:
Yes you can get the file without the need of a password
Click to expand...
Click to collapse
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
beehivemx said:
May I ask how?
Click to expand...
Click to collapse
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
Click to expand...
Click to collapse
Unless you have paid to be a member...Damn.
---------- Post added at 01:20 AM ---------- Previous post was at 01:14 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
Unless you have paid to be a member...Damn.
Click to expand...
Click to collapse
I'm done with XDA. Most useless site I've ever dealt with... I have a $400.00 dollar phone that is useless based on the information on this site. They say this file works for your model but....BRICK. No one test what they post as proven...Don't trust what you read on this forum. Go elsewhere...although there is not much else to go to...
---------- Post added at 01:22 AM ---------- Previous post was at 01:20 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
Unless you have paid to be a member...Damn.
---------- Post added at 01:20 AM ---------- Previous post was at 01:14 AM ----------
I'm done with XDA. Most useless site I've ever dealt with... I have a $400.00 dollar phone that is useless based on the information on this site. They say this file works for your model but....BRICK. No one test what they post as proven...Don't trust what you read on this forum. Go elsewhere...although there is not much else to go to...
Click to expand...
Click to collapse
Oh, I know this will get deleted, but hopefully someone will see this before it does. Nothing of value for the U.S.
The phone was stuck on Logo and wont start. Now i see this :
https://drive.google.com/open?id=0Bxome1ZSCRIaVHg5a0VvU3VqamM
Thanks in advance
diretouch said:
The phone was stuck on Logo and wont start. Now i see this :
https://drive.google.com/open?id=0Bxome1ZSCRIaVHg5a0VvU3VqamM
Thanks in advance
Click to expand...
Click to collapse
Power off the device then try booting to download mode (volume down+home+power, press up when prompted). If you can get to download mode, try flashing the stock firmware.
Sent from my SM-S903VL using Tapatalk
The phone is recognised in Odin.
Can i save my personal data while install firmware?
Here
http://samsung-updates.com/device/?id=GT-i9300
i see 4 BGL version. How to understand which to install ?
I cannot enter recovery. I see the image i showed in first post
There is no a way -that I know of- other than trying to flash twrp, then doing a backup and moving it to the PC this voids warranty
The devices has no warranty.
Then go ahead flash twrp
What is your device model?
---------- Post added at 04:15 PM ---------- Previous post was at 04:11 PM ----------
Forgot to mention that if you didn't enable OEM unlock it won't work and cause a trouble
Gt-i9300.
I am located in eastern Europe - Bulgaria
Thanks
diretouch said:
Gt-i9300.
I am located in eastern Europe - Bulgaria
Thanks
Click to expand...
Click to collapse
Do u have OEM unlock enabled in dev options before now or not?
Can i see that in Odin mode?
The phone is not mine
diretouch said:
The phone is recognised in Odin.
Can i save my personal data while install firmware?
Here
http://samsung-updates.com/device/?id=GT-i9300
i see 4 BGL version. How to understand which to install ?
I cannot enter recovery. I see the image i showed in first post
Click to expand...
Click to collapse
Of the 4 that you found, you need to install the one that works for the mobile carrier that the device is used with.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
-Hope- said:
Then go ahead flash twrp
What is your device model?
---------- Post added at 04:15 PM ---------- Previous post was at 04:11 PM ----------
Forgot to mention that if you didn't enable OEM unlock it won't work and cause a trouble
Click to expand...
Click to collapse
The OEM unlock setting itself has nothing to do with whether TWRP can be flashed. That is just a setting that "allows" you to unlock the bootloader, it doesn't unlock the bootloader, it only puts the device in a state that the bootloader "can" be unlocked if there is a known unlock method.
You can enable OEM unlock as many times as you want, that doesn't mean the bootloader is unlocked. The bootloader has to actually be unlocked using an unlock method.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:42 AM ---------- Previous post was at 01:37 AM ----------
diretouch said:
Can i see that in Odin mode?
The phone is not mine
Click to expand...
Click to collapse
No, you can't, that has to be changed in system settings, you can't get to the settings because of your screen.
Forget about TWRP. Just flash the same android version that the device had before the issue started and the data won't get wiped. When it comes to flashing Samsung devices with Odin, the only time it wipes your data is when a firmware is flashed that has an upgraded or downgraded bootloader compared to what was already on the device. Flash the same thing the device already had and you won't lose anything.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:45 AM ---------- Previous post was at 01:42 AM ----------
-Hope- said:
Do u have OEM unlock enabled in dev options before now or not?
Click to expand...
Click to collapse
You need to slow down and pay attention to details about what people post when describing their issue. You are so impatient to answer that you are posting irrelevant and confusing information for their circumstances. They can't boot this device or get to settings. If they attempt to flash TWRP while their bootloader is locked, it could make things worse. Consider the consequences of what you suggest and consider that most people don't know what they are doing and don't know the risks involved or how to check that your suggestions are safe before they do them. They could blindly walk into a bigger problem.
In this situation, the bootloader could very well be locked without them being aware that it's locked.
In the future, I wouldn't suggest that they flash TWRP when the bootloader can't be confirmed. Stop making suggestions if you can't confirm anything.
Making suggestions without being certain of the state of their device will at some point lead to you telling them to do something that makes things worse instead of helping them. I know you really want to help, but jumping the gun and making suggestions can lead to causing more harm than helping.
Make suggestions that you are "certain" will work, don't make suggestions that "could" work under the right conditions. In this case, you can't be certain that flashing TWRP will work so you should not have suggested it, understand? If the bootloader is locked and they flash TWRP but it bricks the device because the bootloader is locked, what then? Bricking the device will be your fault because you suggested something without being certain. You should have asked more questions and gotten more information about the exact state of this device and it's bootloader status, then, if everything is correct, suggesting to flash TWRP would be safe.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Of the 4 that you found, you need to install the one that works for the mobile carrier that the device is used with.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
The OEM unlock setting itself has nothing to do with whether TWRP can be flashed. That is just a setting that "allows" you to unlock the bootloader, it doesn't unlock the bootloader, it only puts the device in a state that the bootloader "can" be unlocked if there is a known unlock method.
You can enable OEM unlock as many times as you want, that doesn't mean the bootloader is unlocked. The bootloader has to actually be unlocked using an unlock method.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:42 AM ---------- Previous post was at 01:37 AM ----------
No, you can't, that has to be changed in system settings, you can't get to the settings because of your screen.
Forget about TWRP. Just flash the same android version that the device had before the issue started and the data won't get wiped. When it comes to flashing Samsung devices with Odin, the only time it wipes your data is when a firmware is flashed that has an upgraded or downgraded bootloader compared to what was already on the device. Flash the same thing the device already had and you won't lose anything.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 01:45 AM ---------- Previous post was at 01:42 AM ----------
You need to slow down and pay attention to details about what people post when describing their issue. You are so impatient to answer that you are posting irrelevant and confusing information for their circumstances. They can't boot this device or get to settings. If they attempt to flash TWRP while their bootloader is locked, it could make things worse. Consider the consequences of what you suggest and consider that most people don't know what they are doing and don't know the risks involved or how to check that your suggestions are safe before they do them. They could blindly walk into a bigger problem.
In this situation, the bootloader could very well be locked without them being aware that it's locked.
In the future, I wouldn't suggest that they flash TWRP when the bootloader can't be confirmed. Stop making suggestions if you can't confirm anything.
Making suggestions without being certain of the state of their device will at some point lead to you telling them to do something that makes things worse instead of helping them. I know you really want to help, but jumping the gun and making suggestions can lead to causing more harm than helping.
Make suggestions that you are "certain" will work, don't make suggestions that "could" work under the right conditions. In this case, you can't be certain that flashing TWRP will work so you should not have suggested it, understand? If the bootloader is locked and they flash TWRP but it bricks the device because the bootloader is locked, what then? Bricking the device will be your fault because you suggested something without being certain. You should have asked more questions and gotten more information about the exact state of this device and it's bootloader status, then, if everything is correct, suggesting to flash TWRP would be safe.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Thanks for the advises
i've already asked them if they had it enabled, ik it will cause "custom binary blocked by frp" which means he wouldn't be able to do much but reflashing a system again
it was a question, but yeah i think I've made things complicated sorry
And thanks again