Database Info

[Q] OTA on rooted tab -> device status got "modified"

Tt

reset
The only way to reset is "unroot"

Same as me, you must unroot.

moliverac8 said:
Same as me, you must unroot.
Click to expand...
Click to collapse
how do i unroot it?

shpeckoff said:
how do i unroot it?
Click to expand...
Click to collapse
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
Click to expand...
Click to collapse
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
---------- Post added at 07:21 PM ---------- Previous post was at 06:50 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
Click to expand...
Click to collapse
Get odin 1.85 here http://rootzwiki.com/topic/32155-guide-tab-2-101-and-70-rootingcwmroms/page__hl__+unroot++gt++p3110 use the sammobile file you dowloaded, not theirs, (wrong file) follow instructions section E

Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!

shpeckoff said:
Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!
Click to expand...
Click to collapse
When you you root you replace stock files and add some new files that are detected by the installation process of the OTA updates. This sets a flag to block further updates from Samsung. You can still update by restoring to stock then getting the updates then rooting again, but OTAs will not be automatically delivered to your device while its rooted.

[Q] Need help BIG time, no OS anymore.

So before I installed Cyogenmod months ago I forgot to backup everything but I didn't think it mattered as everything was running smooth. I try to update to a nightlybuild that was in my settings and TWRP said it failed. Every single time I tried to reboot or factory reset I would constantly go back to the TWRP screen. I've tried drag and dropping multiple roms onto the phone, find it and 'swipe to confirm flash' but it ALWAYS says fail no matter what. And when I try to go to reboot it says 'WARNING: No OS found.' I've been trying all day and I literally need this phone to work but nothing I do is helping. Please help? Or ask any questions you guys need to know.:crying::crying::crying:

How bout the specs on that phone?
Model, link me to the phone here on xda, link me to the support page of your manufacturers website, etc.
Sounds like a partitioning issue.

jjc09081989 said:
So before I installed Cyogenmod months ago I forgot to backup everything but I didn't think it mattered as everything was running smooth. I try to update to a nightlybuild that was in my settings and TWRP said it failed. Every single time I tried to reboot or factory reset I would constantly go back to the TWRP screen. I've tried drag and dropping multiple roms onto the phone, find it and 'swipe to confirm flash' but it ALWAYS says fail no matter what. And when I try to go to reboot it says 'WARNING: No OS found.' I've been trying all day and I literally need this phone to work but nothing I do is helping. Please help? Or ask any questions you guys need to know.:crying::crying::crying:
Click to expand...
Click to collapse
For Samsung phone:
Go download mode and flash a ROM through ODIN.
For non-Samsung devices:
Flash a ROM from SD-Card.
Smack that Thanks button if I helped!
XDAing from a N7105 powered by Illusion ROM.
Sent from a small country called Singapore.
P.S. Time for school, not much time for XDA

Lgrootnoob said:
How bout the specs on that phone?
Model, link me to the phone here on xda, link me to the support page of your manufacturers website, etc.
Sounds like a partitioning issue.
Click to expand...
Click to collapse
It's not letting me post but my phone is the HTC EVO 4G LTE

jjc09081989 said:
It's not letting me post but my phone is the HTC EVO 4G LTE
Click to expand...
Click to collapse
First, flash to stock based on carrier.
Taken straight from an xda forum post for the sprint model Here is a page that has the stock ruu's use the one at the bottom of the list.
http://www.androidruu.com/index.php?developer=Jewel
Second, fastboot flash the latest twrp img for your evo. (Or however you got it on there in the first place.)
Last, get back to cm or whatever rom you want using the way that you originally got there.
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
Or just follow this tutorial.
Then get back to custom stuff the way you originally did it.

Lgrootnoob said:
First, flash to stock based on carrier.
Taken straight from an xda forum post for the sprint model Here is a page that has the stock ruu's use the one at the bottom of the list.
http://www.androidruu.com/index.php?developer=Jewel
Second, fastboot flash the latest twrp img for your evo. (Or however you got it on there in the first place.)
Last, get back to cm or whatever rom you want using the way that you originally got there.
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
Or just follow this tutorial.
Then get back to custom stuff the way you originally did it.
Click to expand...
Click to collapse
it's saying "the ROM update cannot update please get the correct rom update utility and try again." please help because I believe this will be the thing that gets my phone up and running again

jjc09081989 said:
it's saying "the ROM update cannot update please get the correct rom update utility and try again." please help because I believe this will be the thing that gets my phone up and running again
Click to expand...
Click to collapse
I have samsung phones, your sol.
Just kidding, I have one htc phone. (Dinc 2)
Which tutorial did you follow?
---------- Post added at 08:22 PM ---------- Previous post was at 08:17 PM ----------
Give me about 15 minutes, I'm working on a fix for you.
Have fastboot ready.
---------- Post added at 09:03 PM ---------- Previous post was at 08:22 PM ----------
I found a fix, just load an updated twrp with Fastboot and flash an OS.

Lgrootnoob said:
I have samsung phones, your sol.
Just kidding, I have one htc phone. (Dinc 2)
Which tutorial did you follow?
---------- Post added at 08:22 PM ---------- Previous post was at 08:17 PM ----------
Give me about 15 minutes, I'm working on a fix for you.
Have fastboot ready.
---------- Post added at 09:03 PM ---------- Previous post was at 08:22 PM ----------
I found a fix, just load an updated twrp with Fastboot and flash an OS.
Click to expand...
Click to collapse
I'm on the Recovery screen and it says ***Tampered***
***Relocked***
***Security warning***
jewel pvt ship s-on RL
HBOOT-1.15.0000
radio- 1.05.11.0606
opendsp-v25.1.0.32.0405
emmc-boot
I am trying to use windroid but I am lost with this as well.

jjc09081989 said:
I'm on the Recovery screen and it says ***Tampered***
***Relocked***
***Security warning***
jewel pvt ship s-on RL
HBOOT-1.15.0000
radio- 1.05.11.0606
opendsp-v25.1.0.32.0405
emmc-boot
I am trying to use windroid but I am lost with this as well.
Click to expand...
Click to collapse
You need s-off
then you can flash recovery.

Lgrootnoob said:
You need s-off
then you can flash recovery.
Click to expand...
Click to collapse
How do I get it back to unlocked? I ****ed around and thought locking it would help me but obviously it did not. I really appreciate all of the help so far!

Try this.

Lgrootnoob said:
Try this.
Click to expand...
Click to collapse
That didn't show me anything lol just him doing it all on his phone and there's no description so I don't know what he just did. Plus I can't even get to my home screen I have no OS whatsoever.Stuck on recovery.

jjc09081989 said:
That didn't show me anything lol just him doing it all on his phone and there's no description so I don't know what he just did. Plus I can't even get to my home screen I have no OS whatsoever.Stuck on recovery.
Click to expand...
Click to collapse
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.

Lgrootnoob said:
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.
Click to expand...
Click to collapse
Oh okay I see it I'm sorry I went directly to the youtube video. Where would I put those text codes into though? In windroid?

Lgrootnoob said:
I don't understand that, he provides fastboot commands and two downloads which should provide s-off.
Boot into bootloader with key combo and then use fastboot on your pc with the commands he provided.
If you need drivers then ask.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I'm nearly at the end of my ability to actually be of any use.
Sorry.
Click to expand...
Click to collapse
I appreciate everything so far, just one more thing though if you don't mind. This page, those 'codes.' Where do I put them? Like..under where?

jjc09081989 said:
I appreciate everything so far, just one more thing though if you don't mind. This page, those 'codes.' Where do I put them? Like..under where?
Click to expand...
Click to collapse
At the Windows command prompt, using the fastboot binary at bootloader mode with a usb cable connected and the proper htc drivers installed which can be found in xda forum for your device. :silly:

help problem with update.

sorry for my English fierst lol )))
hello. i have unlocked lg d800 undroid 4.4.2 not rooted and whont update knock code and when i trie to update it cpmes messige "youer phone not registered yet" whot can i do? please help. thanks ))

most probably you'll have to root your phone.
Kernel with the knock code update is available here (last one) https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800
So according to my knowledge you can get the knock code update simply by flashing the D800-20u kernel on top of the KITKAT(original) rom.

i can't get it without root?? i never root this phone

Well it seems that you need to root to flash which is really easy. Rooting is not rocket science
http://forum.xda-developers.com/showthread.php?t=2448887
http://www.droidviews.com/root-and-...lg-g2-verizon-att-sprintt-mobile-bell-rogers/

Kasvinda said:
Well it seems that you need to root to flash which is really easy. Rooting is not rocket science
http://forum.xda-developers.com/showthread.php?t=2448887
http://www.droidviews.com/root-and-...lg-g2-verizon-att-sprintt-mobile-bell-rogers/
Click to expand...
Click to collapse
thanks but if i dont wont to root phone i can't installation knock code ? (((((

and root erase all data on the phone?

zara909 said:
and root erase all data on the phone?
Click to expand...
Click to collapse
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)

Kasvinda said:
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)
Click to expand...
Click to collapse
i'll check it thank you very much

Kasvinda said:
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)
Click to expand...
Click to collapse
there is 2 file

well i trie to root my phone but it say downgrade version

[Q] Stuck in stock recovery with no firmware. PLEASE HELP!

So I was rooted with pingpongroot for a while. My phone started acting buggy and I decided to factory reset (via the settings menu in android). It failed ("dm-verity verification failed"), so I boneheadedly clicked Wipe data/factory reset in recovery, and immediately realizied what I'd done. So now I'm stuck in recovery with no firmware (I think). I can actually boot the phone but it just loads the setup wizard and I cant get out of that app. Cant even expand notifications or anything.
Can someone please guide me how to load a rom onto my phone?

You will want to download the stock firmware on your pc or you might be able to use Kies recovery to do it also.
Sent from my Verizon Galaxy S6

MrWicked1 said:
You will want to download the stock firmware on your pc or you might be able to use Kies recovery to do it also.
Sent from my Verizon Galaxy S6
Click to expand...
Click to collapse
Yeah I have the firmware on my computer. However, it is a Mac. But once it is on my computer, I dont know how to push it to my phone.

sd0070 said:
Yeah I have the firmware on my computer. However, it is a Mac. But once it is on my computer, I dont know how to push it to my phone.
Click to expand...
Click to collapse
I'm not much help with a Mac, I don't know anything about flashing on a Mac. Sorry
Sent from my Verizon Galaxy S6

MrWicked1 said:
I'm not much help with a Mac, I don't know anything about flashing on a Mac. Sorry
Sent from my Verizon Galaxy S6
Click to expand...
Click to collapse
Can you tell me, once I get the file on my device, how would I flash it? Would it be in recovery > install from ADB? Or maybe Install from external storage?

Well if you were on pc it would be you connecting your phone to the pc and it would be a simple process of letting it's do its own thing. I'm not sure fimilar with a way for you to flash a stock firmware on your phone. Just for the heck of it try to boot in safe mode, turn off your phone then press and h o ld volume down and the power button until you get a menu of normal boot etc. Go to safe mode and try to boot up and see what happens. I don't think it will help but it's worth a shot maybe you will be able to get somewhere. Otherwise maybe you have a friend that has a laptop or something that is a Windows pc?
Sent by my Verizon Galaxy Tab S 10.1
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
With a locked bootloader a lot of options are limited to us
Sent by my Verizon Galaxy Tab S 10.1
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Ok try this do a Google search for Samsung Smart Switch for Mac download. They have a Mac version that should be able to download flash the latest firmware.
Sent from my Verizon Galaxy S6

On a mac you need Samsung Smart Switch, it will be able to fully restore your phone with the newest Firmware, you could also use the Verizon verizon upgrade assistant. I used the Verizon option and it hung at 66% for 2 1/2 hours, I ended up going to my local best buy, they had a samsung experience center, and they just reflashed it for me for free!

MrWicked1 said:
Well if you were on pc it would be you connecting your phone to the pc and it would be a simple process of letting it's do its own thing. I'm not sure fimilar with a way for you to flash a stock firmware on your phone. Just for the heck of it try to boot in safe mode, turn off your phone then press and h o ld volume down and the power button until you get a menu of normal boot etc. Go to safe mode and try to boot up and see what happens. I don't think it will help but it's worth a shot maybe you will be able to get somewhere. Otherwise maybe you have a friend that has a laptop or something that is a Windows pc?
Sent by my Verizon Galaxy Tab S 10.1
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
With a locked bootloader a lot of options are limited to us
Sent by my Verizon Galaxy Tab S 10.1
---------- Post added at 12:20 PM ---------- Previous post was at 12:15 PM ----------
Ok try this do a Google search for Samsung Smart Switch for Mac download. They have a Mac version that should be able to download flash the latest firmware.
Sent from my Verizon Galaxy S6
Click to expand...
Click to collapse
It looks like you need to have the smartswitch app installed on a running rom on your phone in order to use it? Thanks for trying to help anyways!
If anyone else pops in here and has any suggestions, I am all ears!

No you just download it on your Mac and connect your phone to the Mac.
Sent from my Verizon Galaxy S6
---------- Post added at 12:33 PM ---------- Previous post was at 12:33 PM ----------
It should detect it and somewhere their will be a option to download the software
Sent from my Verizon Galaxy S6
---------- Post added at 12:35 PM ---------- Previous post was at 12:33 PM ----------
Take a look here http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Sent from my Verizon Galaxy S6

sd0070 said:
It looks like you need to have the smartswitch app installed on a running rom on your phone in order to use it? Thanks for trying to help anyways!
If anyone else pops in here and has any suggestions, I am all ears!
Click to expand...
Click to collapse
There is also a jodin for Mac users.
https://jodin3.casual-dev.com/

MrWicked1 said:
No you just download it on your Mac and connect your phone to the Mac.
Sent from my Verizon Galaxy S6
---------- Post added at 12:33 PM ---------- Previous post was at 12:33 PM ----------
It should detect it and somewhere their will be a option to download the software
Sent from my Verizon Galaxy S6
---------- Post added at 12:35 PM ---------- Previous post was at 12:33 PM ----------
Take a look here http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Sent from my Verizon Galaxy S6
Click to expand...
Click to collapse
Yep, It worked. Thanks so much!

sd0070 said:
Yep, It worked. Thanks so much!
Click to expand...
Click to collapse
Good I'm glad we got it going
Sent from my Verizon Galaxy S6

HELP! I bricked the S6 (Model is sm-s906L) and I cant find the exact PIT file!

Odin says i need a pit file to flash the original recovery onto the phone.
But I cant find this PIT file anywhere on the internet, please if anyone can get this PIT file for this MODEL i would greatly appreciate it!

http://ir-file.com/?p=Firmware/samsung/original/s-series/sm-s906l/sm-s906l_pit
Sent from my SM-G920W8 using Tapatalk
---------- Post added at 18:36 ---------- Previous post was at 18:34 ----------
You probably shouldn't be posting on a million sites & pages. Found this with a Google search in 10 minutes.
Sent from my SM-G920W8 using Tapatalk

Dude wtf
DarryDoo said:
http://ir-file.com/?p=Firmware/samsung/original/s-series/sm-s906l/sm-s906l_pit
Sent from my SM-G920W8 using Tapatalk
---------- Post added at 18:36 ---------- Previous post was at 18:34 ----------
You probably shouldn't be posting on a million sites & pages. Found this with a Google search in 10 minutes.
Sent from my SM-G920W8 using Tapatalk
Click to expand...
Click to collapse
That costs money to download.
I need it for free!

chocolote4444 said:
That costs money to download.
I need it for free!
Click to expand...
Click to collapse
$20 to fix your phone. Sounds pretty cheap.
See how much it costs from a repair shop.
Sent from my SM-G920W8 using Tapatalk

Connect phone to your PC in download mode and do "firmware rescue" via Smart Switch.

Nevermind! I fixed it!!!!!!

chocolote4444 said:
Nevermind! I fixed it!!!!!!
Click to expand...
Click to collapse
Care to elaborate, so others can benefit from your success?
Sent from my SM-G920W8 using Tapatalk

What do you mean?

I added the correct pit file and was able to flash the original recovery.img into the phone

Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfone wireless screen..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
---------- Post added at 07:22 AM ---------- Previous post was at 07:22 AM ----------
chocolote4444 said:
I added the correct pit file and was able to flash the original recovery.img into the phone
Click to expand...
Click to collapse
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfon..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????

Dreysus said:
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfone wireless screen..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
---------- Post added at 07:22 AM ---------- Previous post was at 07:22 AM ----------
Pls, i need the rom you're running on that phone (SM-S906l)
My phone's bricked and it's the exact model you've got.
Current Condition of the Phone
1. Powering on
2. I can access stock recovery
3. I can access download mode
4. I've tried wipe cache/factory reset
5. Phone's still stucked in boot loop
doesn't get past the tracfone wireless screen, boots pasts samsung logo and hangs at tracfon..
Help is seriously needed. Also, anyone know how i can carrier unlock the phone?????
Click to expand...
Click to collapse
Was your phone rooted before it got bricked? Also, I can help you, but you will a custom recovery if your phone is rooted.

chocolote4444 said:
Was your phone rooted before it got bricked? Also, I can help you, but you will a custom recovery if your phone is rooted.
Click to expand...
Click to collapse
I have this same phone......rooted. Can use your help. I want flash any working verizon rom. But more importantly I want to know how to recover from a brick..............
Noticed you were able to recovery from a brick......with Odin? Curious how. I tried to flash a stock Verizon rom, while rooted with ODIN, and pit file.......but it fails.
I am nervous of trying to flash TWRP and custom rom, if I don't know of a full proof recovery method.
Any help is much appreciated.
Thanks

Lucky Day
poog said:
I have this same phone......rooted. Can use your help. I want flash any working verizon rom. But more importantly I want to know how to recover from a brick..............
Noticed you were able to recovery from a brick......with Odin? Curious how. I tried to flash a stock Verizon rom, while rooted with ODIN, and pit file.......but it fails.
I am nervous of trying to flash TWRP and custom rom, if I don't know of a full proof recovery method.
Any help is much appreciated.
Thanks
Click to expand...
Click to collapse
Here's the link to stock firmware. Just load into odin and flash.
http://*******/1fuJAE

Dreysus said:
Here's the link to stock firmware. Just load into odin and flash.
http://*******/1fuJAE
Click to expand...
Click to collapse
Dude that link doesn't work

New Link
https://mega.nz/#!coQzVaoL!OxkuLxfqFsowAd82Yo51C2oKbSg7lcDQMPGeOWb_3e8

Dreysus said:
https://mega.nz/#!coQzVaoL!OxkuLxfqFsowAd82Yo51C2oKbSg7lcDQMPGeOWb_3e8
Click to expand...
Click to collapse
Last question, does that stock contain the modem (modem.bin)? My phone is unbricked but the EFS is messed up because I flashed a marshmallow update via TWRP and did not backup my EFS. I eventally had to restore my original 5.0.2 stock rom.

chocolote4444 said:
Last question, does that stock contain the modem (modem.bin)? My phone is unbricked but the EFS is messed up because I flashed a marshmallow update via TWRP and did not backup my EFS. I eventally had to restore my original 5.0.2 stock rom.
Click to expand...
Click to collapse
Password is required? Is it possible to get it?

beehivemx said:
Password is required? Is it possible to get it?
Click to expand...
Click to collapse
Yes you can get the file without the need of a password

chocolote4444 said:
Yes you can get the file without the need of a password
Click to expand...
Click to collapse
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
beehivemx said:
May I ask how?
Click to expand...
Click to collapse
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
Click to expand...
Click to collapse
Unless you have paid to be a member...Damn.
---------- Post added at 01:20 AM ---------- Previous post was at 01:14 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
Unless you have paid to be a member...Damn.
Click to expand...
Click to collapse
I'm done with XDA. Most useless site I've ever dealt with... I have a $400.00 dollar phone that is useless based on the information on this site. They say this file works for your model but....BRICK. No one test what they post as proven...Don't trust what you read on this forum. Go elsewhere...although there is not much else to go to...
---------- Post added at 01:22 AM ---------- Previous post was at 01:20 AM ----------
beehivemx said:
May I ask how?
---------- Post added at 01:14 AM ---------- Previous post was at 01:03 AM ----------
I've been told this file is only available to VIP members of ClanGSM. Don't bother with this fix...
---------- Post added at 01:14 AM ---------- Previous post was at 01:14 AM ----------
Unless you have paid to be a member...Damn.
---------- Post added at 01:20 AM ---------- Previous post was at 01:14 AM ----------
I'm done with XDA. Most useless site I've ever dealt with... I have a $400.00 dollar phone that is useless based on the information on this site. They say this file works for your model but....BRICK. No one test what they post as proven...Don't trust what you read on this forum. Go elsewhere...although there is not much else to go to...
Click to expand...
Click to collapse
Oh, I know this will get deleted, but hopefully someone will see this before it does. Nothing of value for the U.S.