Hi folks - I'm a first time poster here, so go easy on me
I bought a second hand Honor 6X (BLN-L21) last week. It had Android 6 on it so naturally I checked to see if Android 7 was available for it. It was, but not by checking in-phone for OTA updates. I used the steps on this site STechGuide, perhaps in a bit of a rush...
So the upgrade process said it had failed after about 20 minutes. But after it rebooted it was indeed on Android 7.0 and EMUI 5, but now shows the Build Number as "NRD90M test-keys" and I cannot get it to check for updates. Also now each time I restart the phone I get a message saying "Your device has failed verification and may not work properly".
If I go into the 'eRecovery' settings, it connects to my home wifi and it fails to get package info and all I can do is reboot it.
So in short - how can I blast it back to its original firmware and thereby get official Huawei/Honor OTA updates? Also shouldn't the 6X have received Nougat in the UK by now?
Thanks and apologies for the newbie question that has no doubt been asked many times.
DM
You can ignore warning message. It wont cause any issue. This is because you may have unlocked bootloader while doing this.
What is the build number of firmware you flashed?
BLN-L21CXYZBXYC
please provide these details and I can help with the stock files.
we need OEMINFO file as well to get rid of this NRD test key stuff.
Namaste Shashank and thanks for the reply.
Although I can simply hit the power button to proceed, I would prefer it to automagically proceed to boot!! It was already SIM-unlocked when I bought it by the way. I bought this model second hand, so have the original box it came in and that only says it's a BLN-L21 with a S/N, EAN and IMEI1 (it's a dual sim model though a European model). It has 32Gb storage and 3Gb RAM. The sticker on the bottom of the box (with the S/N) says "This device may be operated in all member states of the EU" if that helps...
I was stupid enough not to take pictures or screenshots of all the system details before flashing it to Nougat, so I cannot give you the specific BLN-L21xxxxxxx information - I thought it might be found via the *#*#2846579#*#* USSD code, but while there is plenty of information there, it doesn't give a specific BLN-L21xxxxxxx code :/
I've tried attaching the phone to the HiSuite application, but it says everything's up to date. HALP!
How exactly can I determine the OEMINFO? I have a bunch of pictures I took with my other phone to illustrate the problem if you need them...
Dhanyavad bhai!
Dazmoriarty
shashank1320 said:
You can ignore warning message. It wont cause any issue. This is because you may have unlocked bootloader while doing this.
What is the build number of firmware you flashed?
BLN-L21CXYZBXYC
please provide these details and I can help with the stock files.
we need OEMINFO file as well to get rid of this NRD test key stuff.
Click to expand...
Click to collapse
dazmoriarty said:
Namaste Shashank and thanks for the reply.
Although I can simply hit the power button to proceed, I would prefer it to automagically proceed to boot!! It was already SIM-unlocked when I bought it by the way. I bought this model second hand, so have the original box it came in and that only says it's a BLN-L21 with a S/N, EAN and IMEI1 (it's a dual sim model though a European model). It has 32Gb storage and 3Gb RAM. The sticker on the bottom of the box (with the S/N) says "This device may be operated in all member states of the EU" if that helps...
I was stupid enough not to take pictures or screenshots of all the system details before flashing it to Nougat, so I cannot give you the specific BLN-L21xxxxxxx information - I thought it might be found via the *#*#2846579#*#* USSD code, but while there is plenty of information there, it doesn't give a specific BLN-L21xxxxxxx code :/
I've tried attaching the phone to the HiSuite application, but it says everything's up to date. HALP!
How exactly can I determine the OEMINFO? I have a bunch of pictures I took with my other phone to illustrate the problem if you need them...
Dhanyavad bhai!
Dazmoriarty
Click to expand...
Click to collapse
Hi mate, give me sometime, i will get the links foe you.
Shukriya buddy!
shashank1320 said:
Hi mate, give me sometime, i will get the links foe you.
Click to expand...
Click to collapse
Any luck Shashank? Hope you had a nice Diwali!
dazmoriarty said:
Shukriya buddy!
Click to expand...
Click to collapse
dazmoriarty said:
Any luck Shashank? Hope you had a nice Diwali!
Click to expand...
Click to collapse
Thanks buddy. Yeah it was nice. sorry for late response, was occupied entire day so couldn't check the old posts.
Please dial *#*#2846579#*#*
Veneer info--version info
Give me content of these 2
Parameter version and version component version
I want to know if it is BLN-L21C432 or C185 or others?
Cool, cool. OK so I've attached two screenies of the Veneer details below, but I can only see Beelin_L21_VN1...
Thanks again dude
shashank1320 said:
Thanks buddy. Yeah it was nice. sorry for late response, was occupied entire day so couldn't check the old posts.
Please dial *#*#2846579#*#*
Veneer info--version info
Give me content of these 2
Parameter version and version component version
I want to know if it is BLN-L21C432 or C185 or others?
Click to expand...
Click to collapse
dazmoriarty said:
Cool, cool. OK so I've attached two screenies of the Veneer details below, but I can only see Beelin_L21_VN1...
Thanks again dude
Click to expand...
Click to collapse
Still unable to get the region from details. C185 or c432. Dint want to mess your phone
Wow - there's really no way to determine the exact model??
Never buying Chinese again...
Thanks for your time anyway yaar
shashank1320 said:
Still unable to get the region from details. C185 or c432. Dint want to mess your phone
Click to expand...
Click to collapse
dazmoriarty said:
Wow - there's really no way to determine the exact model??
Never buying Chinese again...
Thanks for your time anyway yaar
Click to expand...
Click to collapse
It's from UK right?
Well I bought it here, so I assume so. It also has a sticker on the back saying "can be used everywhere in the EU", if that helps...
shashank1320 said:
It's from UK right?
Click to expand...
Click to collapse
dazmoriarty said:
Well I bought it here, so I assume so. It also has a sticker on the back saying "can be used everywhere in the EU", if that helps...
Click to expand...
Click to collapse
@RedSkull23 any idea bro if this is c432 or c185? And accordingly we can help him furthwr to get rid of NRD TEST KEY
---------- Post added at 01:24 PM ---------- Previous post was at 12:53 PM ----------
dazmoriarty said:
Wow - there's really no way to determine the exact model??
Never buying Chinese again...
Thanks for your time anyway yaar
Click to expand...
Click to collapse
Don't worry we will to help as much as possible bro. If not able to find we will help to rebrand to a different region itself without any problems:good:
Many thanks guys
shashank1320 said:
@RedSkull23 any idea bro if this is c432 or c185? And accordingly we can help him furthwr to get rid of NRD TEST KEY
---------- Post added at 01:24 PM ---------- Previous post was at 12:53 PM ----------
Don't worry we will to help as much as possible bro. If not able to find we will help to rebrand to a different region itself without any problems:good:
Click to expand...
Click to collapse
shashank1320 said:
@RedSkull23 any idea bro if this is c432 or c185?
Click to expand...
Click to collapse
Sorry for the late answer brother, i just saw this post. So, i bought mine from Amazon and it is classified HW/EU standing by what my vendor.img says, my build it's C432. But don't worry, there's an easy way to know your build number in any moment; just write your IMEI here http://www.imei.info/ and details should follow
Ok great - will try that shortly!
Thanks a lot guys
DM
RedSkull23 said:
Sorry for the late answer brother, i just saw this post. So, i bought mine from Amazon and it is classified HW/EU standing by what my vendor.img says, my build it's C432. But don't worry, there's an easy way to know your build number in any moment; just write your IMEI here http://www.imei.info/ and details should follow
Click to expand...
Click to collapse
Hmm that site is down currently :/ I tried www.imei.org and it just said it was an Honor 6X, so not much use... I'll keep checking back on that site during the day today.
Grazie ciononostante RedSkull23
RedSkull23 said:
Sorry for the late answer brother, i just saw this post. So, i bought mine from Amazon and it is classified HW/EU standing by what my vendor.img says, my build it's C432. But don't worry, there's an easy way to know your build number in any moment; just write your IMEI here http://www.imei.info/ and details should follow
Click to expand...
Click to collapse
dazmoriarty said:
Hmm that site is down currently :/ I tried www.imei.org and it just said it was an Honor 6X, so not much use... I'll keep checking back on that site during the day today.
Grazie ciononostante RedSkull23
Click to expand...
Click to collapse
Oh i see... Well, there's even an adb method to know build and other props. To obtain Android version you can write on adb "adb shell getprop ro.build.version.release", while other the rest should be visible after that you write "adb shell getprop".
Let me know if you can figure it out!
Ok the site is back up. Here are screen shots of the results - I only used the primary IMEI however.
RedSkull23 said:
Oh i see... Well, there's even an adb method to know build and other props. To obtain Android version you can write on adb "adb shell getprop ro.build.version.release", while other the rest should be visible after that you write "adb shell getprop".
Let me know if you can figure it out!
Click to expand...
Click to collapse
dazmoriarty said:
Ok the site is back up. Here are screen shots of the results - I only used the primary IMEI however.
Click to expand...
Click to collapse
Ok we can't find the thing that we need there so, i thought it was possible. Try adb method!
Related
Hi guys. Are there any news about official marshmallow for the chinese version of Honor 6 plus? I'm talking about the pe-ul00. On the emui site the last stable version is b351(lollipop) and the last beta is from january. Right? The only update that seems available is that I can find by hicare app. It's the B550. Is it marshmallow? Is it stable or a beta?
I'd like to update but I think nothing official came out. Do you have some informations?
Thanks guys
Same problem over here - I have Honor 6 Plus running EMUI3.1_PE-UL00_6.1.1 Lollipop and no updates since the beginning of 2016 Neither using the Updater app, nor anywhere on the Internet. What's up Huawei?
There could be an update, but my chinese is too bad . Take a look: club .huawei.com /forum.php? mod=viewthread&tid=7478881& highlight= PE-UL00
Maybe someone can translate...
Chinese forum: ]club.huawei.com/ search.php? mod=forum&searchid=13822243&orderby=lastpost& ascdesc=desc&searchsubmit =yes&pa ge=2
On chinese download site still the old version: emui .huawei.com /cn/plugin .php?id=hwdownload &mod=detail &mid=127
(i´m not allowed to post outside links, so just close the gaps...)
actually all 6plus device has got Android6 update long time ago……from a poor English user XD
---------- Post added at 08:10 PM ---------- Previous post was at 08:03 PM ----------
huawei did a bad thing that huawei didn't provide EMUI4.0 rom from its website but not all users got update,I can give you a updata from EMUI3.1 to EMYI4.0 beta and beat to official if you need
colinsc said:
actually all 6plus device has got Android6 update long time ago……from a poor English user XD
---------- Post added at 08:10 PM ---------- Previous post was at 08:03 PM ----------
huawei did a bad thing that huawei didn't provide EMUI4.0 rom from its website but not all users got update,I can give you a updata from EMUI3.1 to EMYI4.0 beta and beat to official if you need
Click to expand...
Click to collapse
Then i´m sure you will have no problem to provide a link to Android 6 for the PE-UL00, smart a....
KKF32 said:
Then i´m sure you will have no problem to provide a link to Android 6 for the PE-UL00, smart a....
Click to expand...
Click to collapse
yes of course?but I can't see your emoji and your reply entirely?there are some wrong words there? maybe its because I am using XDA LAB in my phone and it's my first time to come to XDA?can you provide your device model and your rom version again?I can't be sure it could be use because it's made for Chinese version but I can give you a link.By the way could you download from baiduyun?My resource are all in there
---------- Post added at 08:36 PM ---------- Previous post was at 08:31 PM ----------
KKF32 said:
Then i´m sure you will have no problem to provide a link to Android 6 for the PE-UL00, smart a....
Click to expand...
Click to collapse
it's 3am in china?I should go sleep now?maybe I can give it to you later
colinsc said:
yes of course?but I can't see your emoji and your reply entirely?there are some wrong words there? maybe its because I am using XDA LAB in my phone and it's my first time to come to XDA?can you provide your device model and your rom version again?I can't be sure it could be use because it's made for Chinese version but I can give you a link.By the way could you download from baiduyun?My resource are all in there
Click to expand...
Click to collapse
I´m having a Honor 6 Plus PE-UL00 with Build EMUI3.1_PE-UL00_6.1.1 Android Version 5.1.1 loaded from here: emui.huawei.com /cn/ plugin.php? id=hwdownload& mod=detail&mid=127
...and i´m not speaking a single word chinese, i was just joking. So, for you question, if i can read it, i can download it.
Any news guys?
nickolas822 said:
Any news guys?
Click to expand...
Click to collapse
No news, colinsc gave me two download links updating build 611 -> 618 and 618 -> 6116 so OTA update should work, but i was not able to download.
So i stuck at this old one: http: //emui. huawei .com/cn/ plugin.php?id= hwdownload &mod=detail &mid=127
Here are the links colinsc gave me: http: //pan. baidu. com/share /link? shareid= 5428768 72&uk=30937 63556 and http: //pan. baidu .com/share /link?shareid =5380194 66&uk= 309376 3556 (just close the blanks)
Maybe you can manage to download and try it out, just let me know.
KKF32 said:
No news, colinsc gave me two download links updating build 611 -> 618 and 618 -> 6116 so OTA update should work, but i was not able to download.
So i stuck at this old one: http: //emui. huawei .com/cn/ plugin.php?id= hwdownload &mod=detail &mid=127
Here are the links colinsc gave me: http: //pan. baidu. com/share /link? shareid= 5428768 72&uk=30937 63556 and http: //pan. baidu .com/share /link?shareid =5380194 66&uk= 309376 3556 (just close the blanks)
Maybe you can manage to download and try it out, just let me know.
Click to expand...
Click to collapse
Thank you very much. I will try it out and when I have any results I 'll let you know
i'd tried it and now my phone no longer able to boot-up.
it will come out the Android screen but after that i can see a green light and red light at the top left of my phone and then it is off again.
What happening, man?
Anyone see this problem before?
I'm using the 6+, PE UL-00 too
maveloong said:
i'd tried it and now my phone no longer able to boot-up.
it will come out the Android screen but after that i can see a green light and red light at the top left of my phone and then it is off again.
What happening, man?
Anyone see this problem before?
I'm using the 6+, PE UL-00 too
Click to expand...
Click to collapse
No, I am still running 6.1.8 beta with no problem. Maybe you can describe in detail from which build you started updating, which builds you used and what you have done step by step.
Did you try a factory reset from the service menu?
KKF32 said:
No, I am still running 6.1.8 beta with no problem. Maybe you can describe in detail from which build you started updating, which builds you used and what you have done step by step.
Did you try a factory reset from the service menu?
Click to expand...
Click to collapse
This is what i have done:
1) I'm updating the OS from the old KitKat 4.4.2 (not sure which build since it is auto-update with EMUI 3.0)
2) Then i try to update it to Marshmallow (the 2nd link from collinsc/KKF32; http: //pan. baidu .com/share /link?shareid =5380194 66&uk= 309376 3556)
3) It is then the nightmare started. Phone updated but somehow could not boot. Press the [Volume down + Power button], it shows the Android mascot with a caption mentioning that "Phone Locked"
So, i did a further research and found that my phone is bricked!!. And i found a discussion in this forum teaching how to reverse brick from DigiGoon (http://forum.xda-developers.com/honor-6/help/honor-6-plus-pe-tl10-wont-charge-boot-t3404687).
My problem(s) and question right now are:
1) I do not have the bootloader unlocked code. In order to get it, i will need to go to the Huawei EMUI e-mail to them the EMEI and S/N# to get it but I am still waiting for it until now. Is there anyway i can get it like RIGHT AWAY???
2) Also, can i use the latest "trustable" Android firmware (e.g. EMUI3.1_Android5.1)?
Sorry for the long details but hope that you kind a get what I am facing right now and probably recommendations on what to do next.
Sigh....
maveloong said:
This is what i have done:
1) I'm updating the OS from the old KitKat 4.4.2 (not sure which build since it is auto-update with EMUI 3.0)
2) Then i try to update it to Marshmallow (the 2nd link from collinsc/KKF32; http: //pan. baidu .com/share /link?shareid =5380194 66&uk= 309376 3556)
3) It is then the nightmare started. Phone updated but somehow could not boot. Press the [Volume down + Power button], it shows the Android mascot with a caption mentioning that "Phone Locked"
So, i did a further research and found that my phone is bricked!!. And i found a discussion in this forum teaching how to reverse brick from DigiGoon (http://forum.xda-developers.com/honor-6/help/honor-6-plus-pe-tl10-wont-charge-boot-t3404687).
My problem(s) and question right now are:
1) I do not have the bootloader unlocked code. In order to get it, i will need to go to the Huawei EMUI e-mail to them the EMEI and S/N# to get it but I am still waiting for it until now. Is there anyway i can get it like RIGHT AWAY???
Click to expand...
Click to collapse
If you have a Huawei id and also know the product id alongwith IMEI or S/N of your phone, you can get it online from Huawei website. Just Google unlocking Huawei bootloader.
You can use any stock firmware but the latest one is the best.
muradulislam said:
If you have a Huawei id and also know the product id alongwith IMEI or S/N of your phone, you can get it online from Huawei website. Just Google unlocking Huawei bootloader.
You can use any stock firmware but the latest one is the best.
Click to expand...
Click to collapse
Nope. I didn't have the product ID.
That's the missing piece since I couldn't type the *#*#1357946#*#* code since the phone is already bricked right now.
Is there any other way to get the bootloader unlock code? Anyone?
maveloong said:
Nope. I didn't have the product ID.
That's the missing piece since I couldn't type the *#*#1357946#*#* code since the phone is already bricked right now.
Is there any other way to get the bootloader unlock code? Anyone?
Click to expand...
Click to collapse
I am not sure whether it will work or not but head to
http://rootjunkysdl.com/?device=Huawei P8 Lite
And download Huawei ID generator.exe
May be it can help you to generate a device id.
Head to Huawei P8 lite folder and you can find Huawei product ID generator.exe there.
Hope it helps. Let us know here if it is legit.
Information gained from another XDA thread...
muradulislam said:
I am not sure whether it will work or not but head to
http://rootjunkysdl.com/?device=Huawei P8 Lite
And download Huawei ID generator.exe
May be it can help you to generate a device id.
Head to Huawei P8 lite folder and you can find Huawei product ID generator.exe there.
Hope it helps. Let us know here if it is legit.
Information gained from another XDA thread...
Click to expand...
Click to collapse
Download and use the generator but I could not find mine phone name, PE UL-00.
maveloong said:
Download and use the generator but I could not find mine phone name, PE UL-00.
Click to expand...
Click to collapse
Then give this thread a try. It says it's for Huawei honor 6 but may work for your phone. Again let us know, how did it go.
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-unlock-bootloader-id-t3357259
---------- Post added at 10:22 AM ---------- Previous post was at 10:19 AM ----------
muradulislam said:
Then give this thread a try. It says it's for Huawei honor 6 but may work for your phone. Again let us know, how did it go.
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-unlock-bootloader-id-t3357259
Click to expand...
Click to collapse
Please be sure that you want to do this. I can not download and check it myself as I am not near a PC. Anything you do to your phone is your responsibility so please be careful.
maveloong said:
Download and use the generator but I could not find mine phone name, PE UL-00.
Click to expand...
Click to collapse
1. It seems there is a general unlock code too for all huawei phones, maybe it will work for you. Give it a try.
http://forum.xda-developers.com/showthread.php?t=2666116
The same is described here, but it is in german: http ://www.huaweiblog. de/allgemein/ general-bootloader-unlock-fuer-alle-huawei-phones/
2. And for the second question, the official 5.1 ROM worked fine for me, so just use it. http ://emui.huawei. com/plugin /hwdownload /detail?modelId=127
(from android 5.1 (build 6.1.1) I updated manually to android 6.0 (build 6.1.8 beta) and it still runs fine for me.)
I've updated the final Lollipop version 6.1.1 to 6.1.8 (Marshmallow) - all OK, works fine, no double tap to wake..
However, I can't get past that version - updating to 6.1.16 seems to pass OK, however I see no change in the version number or any other differences. Of course, checking for newer SW tells me there is none.. any idea how to get more recent Marshmallow builds? BTW, see https://www.youtube.com/watch?v=UgqDVmaEmYQ on how to d/l from Baidu, worked for me..
I am trying to reverse engineer deeper into how OTA update authentication works. I'm hoping that someone who got this update from Huawei via OTA (without using FunkyHuawei) can send me a PM with their primary and secondary IMEIs. Thanks in advance.
Thanks Duraaraa for your support.
I live in Italy. When i receive the update (ota), I'll send you my primary and secondary IMEI.
duraaraa said:
I am trying to reverse engineer deeper into how OTA update authentication works. I'm hoping that someone who got this update from Huawei via OTA (without using FunkyHuawei) can send me a PM with their primary and secondary IMEIs. Thanks in advance.
Click to expand...
Click to collapse
Hi , Duraaraa
you know how's huawei generate signed and cert that returned when authentication? or the way to re-generated it.
Thank you.
OnimushaPooh said:
Hi , Duraaraa
you know how's huawei generate signed and cert that returned when authentication? or the way to re-generated it.
Thank you.
Click to expand...
Click to collapse
It's done with Huawei's private key. It's not possible to re-generate it, unless you find Huawei's private key. Perhaps you can become a ninja and infiltrate Huawei to find it?
duraaraa said:
It's done with Huawei's private key. It's not possible to re-generate it, unless you find Huawei's private key. Perhaps you can become a ninja and infiltrate Huawei to find it?
Click to expand...
Click to collapse
AttiZ said:
Thanks Duraaraa for your support.
I live in Italy. When i receive the update (ota), I'll send you my primary and secondary IMEI.
Click to expand...
Click to collapse
You could send it to me now, too, if it's not any trouble.
duraaraa said:
You could send it to me now, too, if it's not any trouble.
Click to expand...
Click to collapse
I will PM them in few mins, now that I am back to B126 and no OTA. (Europe, Croatia, for Croatian market)
---------- Post added at 12:58 PM ---------- Previous post was at 12:12 PM ----------
PM sent
also I have tried again eRecovery without FH DNS and Huawei still doesn't provide way to recover your phone if in Europe
duraaraa said:
You could send it to me now, too, if it's not any trouble.
Click to expand...
Click to collapse
Done. No ota at the moment.
@duraaraa
OTA and full package just allowed for my IMEI that you have in PM. I checked like one hour ago nothing and now suddenly it is allowed.
Downloading right now.
Nisam Mate said:
@duraaraa
OTA and full package just allowed for my IMEI that you have in PM. I checked like one hour ago nothing and now suddenly it is allowed.
Downloading right now.
Click to expand...
Click to collapse
I just confirmed. C432B138 is now being signed by Huawei for all IMEIs.
The same thing happened with B126, where there was an early rollout, and a late rollout.
I can make sure that everyone can get the update with the early rollout for the next update by using FunkyHuawei, but unfortunately, I did not capture the non-encoded IMEI of a phone approved for early rollouts, so I was not able to look into it deeper. Hopefully someone who received the early rollout will share next time
Sorry if this has been mentioned but I wanted to confirm my fully converted China AL00 to L29 has just received B138 OTA, I'm so happy Thank you duraaraa for all your help.
duraaraa said:
I just confirmed. C432B138 is now being signed by Huawei for all IMEIs.
The same thing happened with B126, where there was an early rollout, and a late rollout.
I can make sure that everyone can get the update with the early rollout for the next update by using FunkyHuawei, but unfortunately, I did not capture the non-encoded IMEI of a phone approved for early rollouts, so I was not able to look into it deeper. Hopefully someone who received the early rollout will share next time
Click to expand...
Click to collapse
gnasher666 said:
Sorry if this has been mentioned but I wanted to confirm my fully converted China AL00 to L29 has just received B138 OTA, I'm so happy Thank you duraaraa for all your help.
Click to expand...
Click to collapse
Great. That's the first confirmation of a successful OTA update after rebranding, so it's good to know it works as expected.
I think those who rebrand to Europe will not get the early rollout (unless they use FunkyHuawei to get it), but will get the OTA when the full rollout happens. Then, there are a few with a magic IMEI which are approved to install the updates earlier. I am trying to figure out the logic behind that, but I need more information. I have found a skeleton key for the C636 region, though.
hopefully C432B15x is already in works and you'll get some info from someone with magic IMEIs soon .
thanks again.
Nisam Mate said:
hopefully C432B15x is already in works and you'll get some info from someone with magic IMEIs soon .
thanks again.
Click to expand...
Click to collapse
Indeed, let's hope so. I also hope for a LON-L29C432 build to be signed, but I've seen nothing from that yet. Nor have I seen any way to get MHA-L09C432 signed.
I'm interested in the US model and Alexa, as well.
duraaraa said:
I just confirmed. C432B138 is now being signed by Huawei for all IMEIs.
The same thing happened with B126, where there was an early rollout, and a late rollout.
I can make sure that everyone can get the update with the early rollout for the next update by using FunkyHuawei, but unfortunately, I did not capture the non-encoded IMEI of a phone approved for early rollouts, so I was not able to look into it deeper. Hopefully someone who received the early rollout will share next time
Click to expand...
Click to collapse
Hello Duraara and thanks for figuring it out. Can you advise why many users did not received B138 for C432 version? Is there any dependency that blocks it?
masi0 said:
Hello Duraara and thanks for figuring it out. Can you advise why many users did not received B138 for C432 version? Is there any dependency that blocks it?
Click to expand...
Click to collapse
Combination of IMEI and sim card.
duraaraa said:
Combination of IMEI and sim card.
Click to expand...
Click to collapse
Interesting. Should I try using another SIM from same country or just wait till Huawei will release it for my IMEI?
What's also interesting some folks reporting having B138 notification but not anymore.
masi0 said:
Interesting. Should I try using another SIM from same country or just wait till Huawei will release it for my IMEI?
What's also interesting some folks reporting having B138 notification but not anymore.
Click to expand...
Click to collapse
I don't know whether another SIM will help, and I also don't know if Huawei will ever release it for your phone. It's all up to Huawei. I have an exploit that lets me offer it to all phones, but in developing the exploit I was not able to determine exactly what causes Huawei to push the update to a phone or to not push it, unfortunately.
So the B138 update is slowly running out?
If so, the will those who used Funky Huawei to flash, recover phone receive it?
Thx
Esterra said:
So the B138 update is slowly running out?
If so, the will those who used Funky Huawei to flash, recover phone receive it?
Thx
Click to expand...
Click to collapse
It can't be known for sure. It depends on Huawei, and which phones they decide to push it to, and under which circumstances.
Hello people! I was looking for the Lite version of this phone, but couldn't find any post here...
I would like to Root my phone, right now to recover some deleted pictures and videos. Now I'm worried that the Lite version isn't that popular to get some help :/
Compilation number is BLL - L23C60xxxxx
Please I would appreciate any kind of help!! :highfive:
You can search in google " how to root Mate 9 lite" .I have seen any post in google
You must requst code unlockbootloader from huawei for modified
https://rootthat.blogspot.com/2016/12/how-to-root-huawei-mate-9-lite.html
http://ministryofsolutions.com/2017...-bll-l23-nougat-b321-emui5-telefonica-la.html
newyesor said:
You can search in google " how to root Mate 9 lite" .I have seen any post in google
You must requst code unlockbootloader from huawei for modified
https://rootthat.blogspot.com/2016/12/how-to-root-huawei-mate-9-lite.html
http://ministryofsolutions.com/2017...-bll-l23-nougat-b321-emui5-telefonica-la.html
Click to expand...
Click to collapse
Hello, thanks for the reply.
I did a search in google, and tried that first link you posted. The iRoot method wanted to put some weird stuff inside my phone, and even the root wasn't succesfull. And when I look it up in this website, how to root the Mate 9 version, I can see it's quite a process, so I guess those blogs are just scaming us.
izumi937 said:
Hello, thanks for the reply.
I did a search in google, and tried that first link you posted. The iRoot method wanted to put some weird stuff inside my phone, and even the root wasn't succesfull. And when I look it up in this website, how to root the Mate 9 version, I can see it's quite a process, so I guess those blogs are just scaming us.
Click to expand...
Click to collapse
Hello,I am think Mate 9 Lite( GR5 2017) ?
I did a search in google show this link below.
https://forum.xda-developers.com/honor-6x/how-to/how-to-root-huawei-gr5-2017-t3542375
newyesor said:
Hello,I am think Mate 9 Lite( GR5 2017) ?
I did a search in google show this link below.
https://forum.xda-developers.com/honor-6x/how-to/how-to-root-huawei-gr5-2017-t3542375
Click to expand...
Click to collapse
That's interesting, I think that post will help me...
I knew that Mate 9 was the same as honor 6x un europe, but it seems that the GR5 2017 is also the same phone...
Thanks for the link
I will let you all know if it worked, so I can help more people with this thread.
:good:
izumi937 said:
That's interesting, I think that post will help me...
I knew that Mate 9 was the same as honor 6x un europe, but it seems that the GR5 2017 is also the same phone...
Thanks for the link
I will let you all know if it worked, so I can help more people with this thread.
:good:
Click to expand...
Click to collapse
Did it work, izumi? I also would like to root my Mate 9 Lite and place a TWRP recovery ?
vince.lupe said:
Did it work, izumi? I also would like to root my Mate 9 Lite and place a TWRP recovery
Click to expand...
Click to collapse
What's your exact model and build?
BLL-LxxCxxBxxx
ante0 said:
What's your exact model and build?
BLL-LxxCxxBxxx
Click to expand...
Click to collapse
My exact model is BLL-L23 and my build number is BLL-L23C605B130 ?
vince.lupe said:
My exact model is BLL-L23 and my build number is BLL-L23C605B130
Click to expand...
Click to collapse
It's weird you haven't received any update. B130 is from January. There is a new B141 from August, so that might be coming your way soon. The B3xx seem to be EMUI 5. I can build a twrp for you, but you'll have to test it. You could probably try the one released for Mate 9, it might work. If not you just flash back stock B130 recovery.
I'll be able to build it tonight, at the movies now with kids
ante0 said:
It's weird you haven't received any update. B130 is from January. There is a new B141 from August, so that might be coming your way soon. The B3xx seem to be EMUI 5. I can build a twrp for you, but you'll have to test it. You could probably try the one released for Mate 9, it might work. If not you just flash back stock B130 recovery.
I'll be able to build it tonight, at the movies now with kids
Click to expand...
Click to collapse
Ante0, you're awesome, haha ? I'd love to try it out ? Do you also know how to modify stock recovery so that I could flash firmware from Firmware Finder that is "not approved for installation?"
vince.lupe said:
Ante0, you're awesome, haha I'd love to try it out Do you also know how to modify stock recovery so that I could flash firmware from Firmware Finder that is "not approved for installation?"
Click to expand...
Click to collapse
You'd have to use the Flash and rebrand guide https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108. that one has modified stock recoveries. However, none for Lite. I could check and compare Lites recovery to mate 9, if it's not too different it should be easy to make the changes needed. Else you could ask @mankindtw nicely to make it
ante0 said:
You'd have to use the Flash and rebrand guide https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108. that one has modified stock recoveries. However, none for Lite. I could check and compare Lites recovery to mate 9, if it's not too different it should be easy to make the changes needed. Else you could ask @mankindtw nicely to make it
Click to expand...
Click to collapse
ante0, would it be any problem or inconvenience for you to do so? If it is, I could ask @mankindtw to do so - but, if you would be willing to do so, I would love it ? Just let me know what you need and how I should do what you think I should do, and I'll be right on it ?
vince.lupe said:
ante0, would it be any problem or inconvenience for you to do so? If it is, I could ask @mankindtw to do so - but, if you would be willing to do so, I would love it Just let me know what you need and how I should do what you think I should do, and I'll be right on it
Click to expand...
Click to collapse
I'll just check and see what mankindtw did in the other recoveries. It's just a few bytes in 2 files to change. So I'll basically compare your recovery to mine and/or the others in that flash thread and see if there's much difference. If it is you'll have to ask mankindtw as he might know what to look for.
Edit: I will check when I get home
ante0 said:
I'll just check and see what mankindtw did in the other recoveries. It's just a few bytes in 2 files to change. So I'll basically compare your recovery to mine and/or the others in that flash thread and see if there's much difference. If it is you'll have to ask mankindtw as he might know what to look for.
Edit: I will check when I get home
Click to expand...
Click to collapse
Thank you very much, my friend ?
vince.lupe said:
Thank you very much, my friend
Click to expand...
Click to collapse
You'll have to ask Mankindtw
It's too different. If it was just changing the bytes I could do it, but file size is almost half of my recovery image. Lol.
However, you should be able to use TWRP for P9 Lite. It seems to be basically the same device, both are named hi6250 (compared fstab, they're identical and named fstab.hi6250 ).
Here's a link: https://forum.xda-developers.com/showpost.php?p=67481026&postcount=10
ante0 said:
You'll have to ask Mankindtw
It's too different. If it was just changing the bytes I could do it, but file size is almost half of my recovery image. Lol.
However, you should be able to use TWRP for P9 Lite. It seems to be basically the same device, both are named hi6250 (compared fstab, they're identical and named fstab.hi6250 ).
Here's a link: https://forum.xda-developers.com/showpost.php?p=67481026&postcount=10
Click to expand...
Click to collapse
Okay, thank you very much, ante0 ? So, for sure, the recovery will work?
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
vince.lupe said:
Ante0, you're awesome, haha ? I'd love to try it out ? Do you also know how to modify stock recovery so that I could flash firmware from Firmware Finder that is "not approved for installation?"
Click to expand...
Click to collapse
@mankindtw, I would REALLY appreciate it if you would help me out with a modified recovery for my BLL-L23 [Mate 9 Lite] ? Would you be willing to help me? I'll send you a PM if you don't mind?
vince.lupe said:
Okay, thank you very much, ante0 So, for sure, the recovery will work?
Click to expand...
Click to collapse
It's not for sure. I'm just saying the P9 Lite and Mate 9 Lite seem to be identical. So you'll have to test. lol
In case it doesn't work you can just flash back stock recovery.
It's the same if I were to build it, it's not certain it would work as I can't test it myself.
But you should probably wait for mankindtw to patch the recovery image.
And if you install that TWRP, it will probably be in chinese by default.
you can look at section 2.1 here https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
to change it to english. If you'll just use it to update to EMUI 5.0 it doesn't really matter.
And when/if you update to EMUI 5.0, you'll want to flash this TWRP instead: https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
If you want TWRP that is.
Edit:
Link to your stock recovery and recovery 2: https://mega.nz/#!lxljkRwA!XxZKUsOTegYdHQVCh7_USuMDC2ZEuBgA6AHX4Q3bsAQ
ante0 said:
It's not for sure. I'm just saying the P9 Lite and Mate 9 Lite seem to be identical. So you'll have to test. lol
In case it doesn't work you can just flash back stock recovery.
It's the same if I were to build it, it's not certain it would work as I can't test it myself.
But you should probably wait for mankindtw to patch the recovery image.
And if you install that TWRP, it will probably be in chinese by default.
you can look at section 2.1 here https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
to change it to english. If you'll just use it to update to EMUI 5.0 it doesn't really matter.
And when/if you update to EMUI 5.0, you'll want to flash this TWRP instead: https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
If you want TWRP that is.
Edit:
Link to your stock recovery and recovery 2: https://mega.nz/#!lxljkRwA!XxZKUsOTegYdHQVCh7_USuMDC2ZEuBgA6AHX4Q3bsAQ
Click to expand...
Click to collapse
Thank you very much, ante0, for everything! I'll get a hold of @mankindtw now to see what he says ? I'll keep you updated also.
@mankindtw
I have been having issues with my phone, so I'm not sure if you received my previous messages or not (cannot find them in sent PMs), but my name is Vince, and need some MAJOR help...
I was referred to you by someone by the XDA name of ante0, and he mentioned to me in passing that you are the master at creating modified stock recoveries. I was hoping that you'd be able to help me out?
I just recently bought a Huawei Mate 9 Lite (BLL-L23)
that has old software on it. The current build is BLL-L23C605B130, the custom version is CUSTC605D001, and EMUI is 4.1; however, I know that there are builds that are much more recent. My phone, for the life of me, just simply cannot upgrade to the recent firmware via official means.
I recently heard of Firmware Finder and found the latest firmware for my device - but, it tells me under Check Firmware Status, "Firmware not approved for installation." I also heard that there is a way to install that firmware by bypassing authorization.
I would really appreciate it if you would be so kind to create for me a modified stock recovery for my device.
I don't know any other developers who can do so, and I'm definitely not a developer myself, haha. I can't explain why my device won't update, because I know that the most recent build is B364? If I flash the software by bypassing authorization, will everything still work perfectly?
Thank you very much, Mankindtw, for your consideration... I would be extremely grateful for your help, my friend.
vince.lupe said:
Did it work, izumi? I also would like to root my Mate 9 Lite and place a TWRP recovery
Click to expand...
Click to collapse
Hello! I gave up...
I followed some steps, reading topics from this site.
I could unlock my bootloader (now everytime I power my phone I got a message reminding me that xD)
But I couldn't install the twrp, tested some adb softwares, but nothing... always got some kind of error. And I never get a clear explanation about those chinese .exe softwares to install twrp and those stuff.
If this question has been answered, I do apologize. I did search but could not find it.
I just bought an Honor 6X online and discovered that it is a Chinese version ( Model BLN-AL10, Build BLN-AL10C00B379, EMUI Version 5.0.1, Android 7.0). Is it possible to flash the US stock firmware without bricking the phone. If possible a little guidance will go a long way.
Thank you.
Not as of now. We have files for Indian version but need to check for them as well as we lost somewhere on the forum.
I am struggling with same
TheBoozer said:
If this question has been answered, I do apologize. I did search but could not find it.
I just bought an Honor 6X online and discovered that it is a Chinese version ( Model BLN-AL10, Build BLN-AL10C00B379, EMUI Version 5.0.1, Android 7.0). Is it possible to flash the US stock firmware without bricking the phone. If possible a little guidance will go a long way.
Thank you.
Click to expand...
Click to collapse
its batter to flash BLN-L22C636!!
here is the oeminfo of BLN-L22C636
https://drive.google.com/file/d/0B0Ra1dRtY0loTTVZSC0tQWphSVU/view?usp=sharing
sweetjuice said:
its batter to flash BLN-L22C636!!
here is the oeminfo of BLN-L22C636
https://drive.google.com/file/d/0B0Ra1dRtY0loTTVZSC0tQWphSVU/view?usp=sharing
Click to expand...
Click to collapse
Thank you for responding but is this file the US version or EU version? Would you please explain why this file would be better?
TheBoozer said:
Thank you for responding but is this file the US version or EU version? Would you please explain why this file would be better?
Click to expand...
Click to collapse
Because there may not be all the files handy for other region.
---------- Post added at 05:39 AM ---------- Previous post was at 05:38 AM ----------
sweetjuice said:
its batter to flash BLN-L22C636!!
here is the oeminfo of BLN-L22C636
https://drive.google.com/file/d/0B0Ra1dRtY0loTTVZSC0tQWphSVU/view?usp=sharing
Click to expand...
Click to collapse
Wr need custom bin as well. If not posted in repository thread
---------- Post added at 05:40 AM ---------- Previous post was at 05:39 AM ----------
TheBoozer said:
Thank you for responding but is this file the US version or EU version? Would you please explain why this file would be better?
Click to expand...
Click to collapse
Thats Indian version it seems
shashank1320 said:
Because there may not be all the files handy for other region.
---------- Post added at 05:39 AM ---------- Previous post was at 05:38 AM ----------
Wr need custom bin as well. If not posted in repository thread
---------- Post added at 05:40 AM ---------- Previous post was at 05:39 AM ----------
Thats Indian version it seems
Click to expand...
Click to collapse
Can I flash LineageOS 14.1 on my Chinese version phone (after I root of course)
TheBoozer said:
Can I flash LineageOS 14.1 on my Chinese version phone (after I root of course)
Click to expand...
Click to collapse
I tried but failed with error 7 in recovery. related with E1001- unable to update system blocks.
Have Full TWRP backup and try your luck.
shashank1320 said:
I tried but failed with error 7 in recovery. related with E1001- unable to update system blocks.
Have Full TWRP backup and try your luck.
Click to expand...
Click to collapse
Thank you for responding. Can I flash stock US Rom?
TheBoozer said:
Thank you for responding. Can I flash stock US Rom?
Click to expand...
Click to collapse
With all the files, yes.
Check a new thread started today. You will get detailed information there
shashank1320 said:
With all the files, yes.
Check a new thread started today. You will get detailed information there
Click to expand...
Click to collapse
There are a number of threads started today, would you please direct me to which one you are referring to.
Thank you
TheBoozer said:
There are a number of threads started today, would you please direct me to which one you are referring to.
Thank you
Click to expand...
Click to collapse
Here you go. It may not be the exact one you are looking but you can go with different region.
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
shashank1320 said:
Here you go. It may not be the exact one you are looking but you can go with different region.
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
Click to expand...
Click to collapse
Thank you indeed.
TheBoozer said:
Thank you indeed.
Click to expand...
Click to collapse
Hope it works for you. I am yet to try.
May be today or tomorrow night
shashank1320 said:
Hope it works for you. I am yet to try.
May be today or tomorrow night
Click to expand...
Click to collapse
At last, I got my phone unlocked, installed TWRP and rooted. Now I am exploring rebranding to US version. In my research, I found US files in this website "http://www.androhippo.com/huawei-honor-6x" and downloaded the US L24C567B360 "update.zip" and "update_full_BLN_L24_hw_usa.zip". However, I wanted to ask you if you are familiar with this website and the 2 referenced files.
I can't flash using the dload method because my phone does not read the microsd card (defective). Can I flash using the MiFlash app?
Thank you.
TheBoozer said:
At last, I got my phone unlocked, installed TWRP and rooted. Now I am exploring rebranding to US version. In my research, I found US files in this website "http://www.androhippo.com/huawei-honor-6x" and downloaded the US L24C567B360 "update.zip" and "update_full_BLN_L24_hw_usa.zip". However, I wanted to ask you if you are familiar with this website and the 2 referenced files.
I can't flash using the dload method because my phone does not read the microsd card (defective). Can I flash using the MiFlash app?
Thank you.
Click to expand...
Click to collapse
We need sd card here. On some cases with my Honor 5C, it worked without sd card and dload was working with internal memory bht cant confirm as others have never reported this behaviour
shashank1320 said:
We need sd card here. On some cases with my Honor 5C, it worked without sd card and dload was working with internal memory bht cant confirm as others have never reported this behaviour
Click to expand...
Click to collapse
You are right, I tried "dload" from internal storage, didn't work (I am trying to find someone here in the US to fix my defective microsd card reader). When you have a moment, please let me know what you think of "androhippo" and if I could trust the stock roms they listed. I am not sure whether the US rom they listed is full or not (it is a 3.5 GB file).
Thank you.
TheBoozer said:
You are right, I tried "dload" from internal storage, didn't work (I am trying to find someone here in the US to fix my defective microsd card reader). When you have a moment, please let me know what you think of "androhippo" and if I could trust the stock roms they listed. I am not sure whether the US rom they listed is full or not (it is a 3.5 GB file).
Thank you.
Click to expand...
Click to collapse
Give me the curent model number and build number. I will try to help as much as i can
shashank1320 said:
Give me the curent model number and build number. I will try to help as much as i can
Click to expand...
Click to collapse
I really value your advice. Here is the info:
Model BLN-AL10
Build BLN-AL10C00B379
EMUI Version 5.0.1
Android Version 7.0
shashank1320 said:
Give me the curent model number and build number. I will try to help as much as i can
Click to expand...
Click to collapse
Deleted, apologize double posting.
TheBoozer said:
I really value your advice. Here is the info:
Model BLN-AL10
Build BLN-AL10C00B379
EMUI Version 5.0.1
Android Version 7.0
Click to expand...
Click to collapse
Sorry for late response on this.
I am not sure on how can you debrand this to US version as I dont have the files yet, mainly OEMINFO file. Once I get it, I can guide you step by step. in fact there is a guide in my signature to do it the best way. I have published this guide yesterday and of you want you can debrand to Indian version BLN-L22.
For US version these 3 files are required (Plus the oeminfo file which couldn't find yet) but 2 of them are same as you downloaded but through a different channel.
Main ZIp- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82849/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...BLN-L24_hw_usa/update_full_BLN-L24_hw_usa.zip
This below may not be required to debrand but in case you face any issues after debranding then you can use this.
http://update.hicloud.com:8180/TDS/...49/f1/full/public/update_data_full_public.zip
Once I get the oeminfo file, I can 100% debrand your phone to US version.
refer this for the simplest steps you could do debrand.
https://forum.xda-developers.com/honor-6x/how-to/guide-debranding-to-india-variant-bln-t3679402
Guys, please help me. I rebranded my FRD-L14C567 To FRD-L09C432. Now I want to go back FRD-L14C567. Is there a way to get it back? Where can I find the OEM info of it?
Guys please help!!! I just want to go back to FRD-L14C567.
SuperSwordSmasher said:
Guys please help!!! I just want to go back to FRD-L14C567.
Click to expand...
Click to collapse
The way I managed to go from C636 to C432 was through Huawei Multi-Tool, in that change vendor option. After that, I used dload to flash C432.
This site lists all the firmwares for your model, maybe it helps: http://pro-teammt.ru/firmware-database/?firmware_model=frd-L14C567&firmware_page=0
valp88 said:
The way I managed to go from C636 to C432 was through Huawei Multi-Tool, in that change vendor option. After that, I used dload to flash C432.
This site lists all the firmwares for your model, maybe it helps: http://pro-teammt.ru/firmware-database/?firmware_model=frd-L14C567&firmware_page=0
Click to expand...
Click to collapse
But FRD-L14C567 Is a big defference between FRD-L09C432. I dont think that would help me rebrand back to FRD-L14C567.
SuperSwordSmasher said:
But FRD-L14C567 Is a big defference between FRD-L09C432. I dont think that would help me rebrand back to FRD-L14C567.
Click to expand...
Click to collapse
I just checked Multi-Tool and it seems they're not covering vendor/country change for L14. Too bad.
That's as far has my experience go, so good luck in your research!
valp88 said:
I just checked Multi-Tool and it seems they're not covering vendor/country change for L14. Too bad.
That's as far has my experience go, so good luck in your research!
Click to expand...
Click to collapse
Aw man, hopefully they will add it soon so i can come back to L14
And where is the tab in multitool to change vendor/country? I was not able to find that tab in multitool just incase
And when i went to multitool 7, the language was different and the vendor change was filled with question marks.
SuperSwordSmasher said:
Aw man, hopefully they will add it soon so i can come back to L14
And where is the tab in multitool to change vendor/country? I was not able to find that tab in multitool just incase
And when i went to multitool 7, the language was different and the vendor change was filled with question marks.
Click to expand...
Click to collapse
It happened to me too. I had to download it from their site. It's the application that has that command line look, not the one with the fancy gui.
valp88 said:
It happened to me too. I had to download it from their site. It's the application that has that command line look, not the one with the fancy gui.
Click to expand...
Click to collapse
Oh thanks, i know what your talking about.