Database Info

[Q] help for desire s

hello'
i want to know about which rom is shipped with my htc desire s.i have purchase my phone second hand,and i have no bill box or warranty card,
so,
how to know about my phones shipped rom and my phone is not provided by any service provider vodafone,T-mobile or etc,
so,
how can i know about which shipped rom is for my htc desire s,
please reply me fast.
and you can send me solution on my mail ID-[email protected]
from--Ni**** Chauhan

[email protected] said:
hello'
i want to know about which rom is shipped with my htc desire s.i have purchase my phone second hand,and i have no bill box or warranty card,
so,
how to know about my phones shipped rom and my phone is not provided by any service provider vodafone,T-mobile or etc,
so,
how can i know about which shipped rom is for my htc desire s,
please reply me fast.
and you can send me solution on my mail ID-[email protected]
from--Ni**** Chauhan
Click to expand...
Click to collapse
You'll have to boot into fastboot and issue the command :
fastboot getvar all
Hide your IMEI and device id and post the result here. The CID info will help me in locating where your phone is from.
Cheers.

help for desire s
hello,
first of all thanks for reply me,
i want to tell you,please send me step by step procedural because i have just
purchase my phone, and i do not understand your reply.
"""You'll have to boot into fastboot and issue the command :
fastboot getvar all
Hide your IMEI and device id and post the result here. The CID info will help me in locating where your phone is from."""
so, please reply me step by step process....
from---Ni**** Chauhan

[email protected] said:
hello,
first of all thanks for reply me,
i want to tell you,please send me step by step procedural because i have just
purchase my phone, and i do not understand your reply.
"""You'll have to boot into fastboot and issue the command :
fastboot getvar all
Hide your IMEI and device id and post the result here. The CID info will help me in locating where your phone is from."""
so, please reply me step by step process....
from---Ni**** Chauhan
Click to expand...
Click to collapse
Use the search function. You have to show some onus on your part to solve this problem man. I just used search and the answers are all there. Plus, research is likely to improve your knowledge too, as opposed to spoon feeding. Use the XDA search function, and read through the forums and tutorials. It's all there, waiting for you to put in some effort. Have you even looked at the links in my signature?
Cheers

@ thread starter
As my above poster said, read fastboot and adb guide.
and try to implement his command.
You can check your version in settings, post here so someone can give you an !dea.

hello, friends thanks for reply,
i read your past solution,now tell me what do you need to solve my problem,
my --- Hboot version is 0.98.0000
Radio --- 38.03.02.11_m
running on --- android 2.3.5 official rom
now i understand how to go in to recovery mode
if you need anything else please tell me,,ok
from---Ni**** Chauhan

hi,
now i understand your first reply
"""You'll have to boot into fastboot and issue the command :
fastboot getvar all
Hide your IMEI and device id and post the result here. The CID info will help me in locating where your phone is from.""""
now following is the result of run the getvar all command
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Ni****>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.1
(bootloader) serialno:**************
(bootloader) imei: **************
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4151mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.029s
now i give you your requirement for solve the problem,OK
so,please give me the solution of my problem
Reply me Fast........
from---Ni**** Chauhan

[email protected] said:
hi,
now i understand your first reply
"""You'll have to boot into fastboot and issue the command :
fastboot getvar all
Hide your IMEI and device id and post the result here. The CID info will help me in locating where your phone is from.""""
now following is the result of run the getvar all command
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Ni****>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.1
(bootloader) serialno:**************
(bootloader) imei: **************
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4151mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.029s
now i give you your requirement for solve the problem,OK
so,please give me the solution of my problem
Reply me Fast........
from---Ni**** Chauhan
Click to expand...
Click to collapse
cidnum: HTC__001 corresponds to HTC_WWE and is not tied to any specific region or carrier. You can flash any non-branded RUU with HTC_WWE in the name and you should be fine. For example the HTC_Asia_WWE RUU should be safe for you.
This is to the best om my knowledge, but i may be wrong. Please corroborate with other sources too to confirm this before you attempt an RUU flash without a goldcard. With a goldcard however, this should no longer be a problem, as long as you match your misc_version well
Cheers.

hi,
thanks for reply with your solution,
please tell me how can you know about shipped rom,and can you tell me how to know about shipped rom via those details,please tell i want to know about this trick
and you also tell me,"you may be wrong so please corroborate with other sources"
so, can you tell me which other sources can solve my problem?
from---Ni**** Chauhan

[email protected] said:
hi,
thanks for reply with your solution,
please tell me how can you know about shipped rom,and can you tell me how to know about shipped rom via those details,please tell i want to know about this trick
and you also tell me,"you may be wrong so please corroborate with other sources"
so, can you tell me which other sources can solve my problem?
from---Ni**** Chauhan
Click to expand...
Click to collapse
It's no secret... there's a list of CIDnums corresponding to each region/operator, and you can tally your version against these :
Here you go -
SuperCID 11111111
Asia-HK-CHT HTC__622
ATT CWS__001
BM BM_001
Bouygues-Telecom BOUYG201
Brightstar-PTB BSTAR502
Brightstar-SPA BSTAR301
Chunghwa-Taiwan CHT__601
CT HTCCN702
CU HTCCN703
DCM DOCOM801
DOPOD DOPOD701
Era T-MOB009
Fastweb-IT FASTW401
GOOGLE GOOGL001
H3G-DAN H3G__F05
H3G-Italy H3G__402
H3G-ROI H3G__003
H3G-SWE H3G__G04
H3G-UK H3G__001
HTC-Asia-SEA HTC__037
HTC-Asia-SEA-WWE HTC__044
HTC-Australia HTC__023
HTC-BE HTC__E41
HTC-Czech HTC__C24
HTC-Denmark HTC__F08
HTC-Dutch HTC__E11
HTC-EastEurope HTC__032
HTC-ELL HTC__N34
HTC-FRA HTC__203
HTC-FRA-Bouygues HTC__247
HTC-GCC HTC__J15
HTC-GER HTC__102
HTC-India HTC__038
HTC-ITA HTC__405
HTC-Nor HTC__Y13
HTC-Norway HTC__H10
HTC-Poland HTC__B25
HTC-PTG HTC__506
HTC-Russia HTC__A07
HTC-SPA HTC__304
HTC-Sweden HTC__G09
HTC-Turkey HTC__M27
HTC-WWE HTC__001
Hutch-Australia HUTCH001
O2-DE O2___102
O2-UK O2___001
Open-Channel HTCCN701
Optus-Australia OPTUS001
As for corroborating with other sources, you'll have to wait for someone else to reply to your posts here. I did whatever i could do to help...

[Q] GetVar Main & Return to Stock to Install JB 3.16.110.3 TMOB005

Hi everyone
Hope someone can help me or point me in the right direction as I've been searching for many hours on how to get the JB OTA 3.16.110.3 installed on to my TMOBILE UK Branded HTC One S (S4) but with O2 sim.
Im fairly new to android but managed to root and unlock the phone a few months back...
So reading various threads I need to find my original RUU version and do find the correct version run the fastboot getvar version-main command..Which I have but it returns BLANK, so Im at a loss of which RUU version I should use
I have tried all of the TMOB RUU's I can find on the web but all fail..
Listed Bootloader/software and fastboot getvar all results
Any help / suggestions would be greatly appreciated..
Software Information..
Android Version
4.0.4
HTC Sense Ver
4.1
Software Number
2.38.110.2
HTC SDK API Level
4.23
HTC Extension Ver
HTCExtension_403_1_GA_20
Build Number..
2.38.110.2 CL97613 release-keys
Bootloader Info..
TAMPERED
RELOCKED
VLE PVT SHIP S-ON RL
HBOOT - 1.14.0002
RADIO-1 1.08es.50.02.16
fastboot getvar all results...
C:\Droid>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0002
(bootloader) version-baseband: 1.08es.50.02.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4143mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1a7fdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.072s

Faultless said:
Hi everyone
Hope someone can help me or point me in the right direction as I've been searching for many hours on how to get the JB OTA 3.16.110.3 installed on to my TMOBILE UK Branded HTC One S (S4) but with O2 sim.
Im fairly new to android but managed to root and unlock the phone a few months back...
So reading various threads I need to find my original RUU version and do find the correct version run the fastboot getvar version-main command..Which I have but it returns BLANK, so Im at a loss of which RUU version I should use
I have tried all of the TMOB RUU's I can find on the web but all fail..
Listed Bootloader/software and fastboot getvar all results
Any help / suggestions would be greatly appreciated..
Click to expand...
Click to collapse
Em there is a good user with the same phone and I believe he said he got JB so with a bit of luck he see this and tell what RUU you need but while you waiting the RUU needs to be 2.38 or higher and match your CID.

@Faultless
Did you solve your problem and how?

2.38 RUU
qzem said:
@Faultless
Did you solve your problem and how?
Click to expand...
Click to collapse
Hi ..Fraid not ..never was able to find the 2.38 or higher RUU .. so gave up searching
If anyone reads this and has a link would be greatly appreciated ..
Thanks

Why not soff. Then run lower ruu and do otas to latest.
Better yet then set a HTC cid and unbrand the phone.
Verstuurd van mijn One S met Tapatalk

Version Main Changed to 1.24.401. from 3.33.720

Hi,
The first ROM I ever flashed was a ViperS 3.1.2. Before when I was on stock ROM my firmware version main was 3.33.720.X and after flashing ViperS it changed to 1.24.401.X. Why does the Version Main changed after flashing the ROM? I flashed MIUI for some weeks and again it shows 1.24.401.X as my firmware version. I have not faced any issues because of it. I just want to know is this normal? Can I change back to 3.33 without flashing the firmware?
Sent from my HTC Sensation Z710e

MrJukeHardbane said:
Hi,
The first ROM I ever flashed was a ViperS 3.1.2. Before when I was on stock ROM my firmware version main was 3.33.720.X and after flashing ViperS it changed to 1.24.401.X. Why does the Version Main changed after flashing the ROM? I flashed MIUI for some weeks and again it shows 1.24.401.X as my firmware version. I have not faced any issues because of it. I just want to know is this normal? Can I change back to 3.33 without flashing the firmware?
Sent from my HTC Sensation Z710e
Click to expand...
Click to collapse
you can see the actual firmware with
fastboot getvar version-main

rzr86 said:
you can see the actual firmware with
fastboot getvar version-main
Click to expand...
Click to collapse
Yes. I already checked there and it shows the same. 1.24.401 one.
Sent from my HTC Sensation Z710e
EDIT : version: 0.5
version-bootloader: 1.27.1111
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 1.24.401.1
serialno: HT17K*******
imei: 356440048********
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: 11111111
battery-status: good
battery-voltage: 4110mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Output of fastboot getvar all

MrJukeHardbane said:
Yes. I already checked there and it shows the same. 1.24.401 one.
Sent from my HTC Sensation Z710e
EDIT : version: 0.5
version-bootloader: 1.27.1111
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 1.24.401.1
serialno: HT17K*******
imei: 356440048********
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: 11111111
battery-status: good
battery-voltage: 4110mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Output of fastboot getvar all
Click to expand...
Click to collapse
i don't know man
actually leave it as it is
if you don't have any issues i see no point to change it

rzr86 said:
i don't know man
actually leave it as it is
if you don't have any issues i see no point to change it
Click to expand...
Click to collapse
Yeah but i just want to confirm that this would not be troublemaker for me in future. It's better to prevent than to cure. Is anyone else facing the same issue just as I am?.
EDIT : Is it possible that performing Juopunutbear S-off changed it?. I guess its not related to ROM flash and more with S-Off. May be Juopunutbear hboot flash changed it.

htc one s can't fnd officiall rom

hi i'm having an htc one s
Tampered
Unlocked
Vle PVT SHIP S-ON RL
HBOOT 2.15.0000
RADIO-1.13.50.05.31
OPEN DSP -V31.1.0.45.0815
EMMC-BOOT
and i try to flash official rom :
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5
it doesn't work wich version should i use the phone has a logo of t-mobile .
thanks

What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk

there is no cid mentioned.....
LS.xD said:
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse

c.vadim said:
there is no cid mentioned.....
Click to expand...
Click to collapse
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?

yes phone is brick hanging on logo
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT26HW401400
(bootloader) imei: 359902043656481
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3890mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse

You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.

can i write that firmware by TWRP ?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse

No. You can flash it using fastboot commands
Sent from my beloved HTC One S using (most time buggy) Tapatalk

Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse

c.vadim said:
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
Click to expand...
Click to collapse
Here it is on Androidruu.com --> TMOUS 3.14

Error 155 Unknown error
"The Rom update utility cnnot update your Android phone.
Please get the coreect ROM Update Utility and try again.
any solution ?

You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk

done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
LS.xD said:
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse

after sofware phone powers on and works ok... but in conversation it has no sound
c.vadim said:
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
Click to expand...
Click to collapse

Hi
Can you tell me from this output which shipped firmware should I try to revive one HTC one s which just hangs at HTC logo?
Code:
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.0001
(bootloader) version-baseband: 16.05.20.16_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.11.401.110
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH264W402222
(bootloader) imei: 352762055720535
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f616909f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.484s
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse

[Q] Can't boot any ROMs based on Flemmards kernel

So, this is a huge problem for me. I'm running S-OFF with hboot 1.27.1111, and whatever radio was in the latest RUU. However, I can't boot any of the new 3.4kernel based ROMs. The Logcats I was able to capture are here: http://forum.xda-developers.com/showthread.php?p=51959307#post51959307
Anyone have any ideas? I'm desperate for CM11.

Hi,
What Recovery did you use to flash???

blogodoblogodo said:
Hi,
What Recovery did you use to flash???
Click to expand...
Click to collapse
4Ext 1.0.0.6 RC1, The latest one

Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot

blogodoblogodo said:
Try fastboot getvar all
then we will see if there is a problem.
Maybe with another Hboot version???
Firmware 3.33 Universal:
Flash this in Bootloader Mode : http://d-h.st/SuC
MD5: 07cc2a2ea4473e8fe8d6fe844c4020a1
then get the latest RIL
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
Then try to boot
Click to expand...
Click to collapse
The output of fastboot:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4114mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Still doesn't boot succesfully, crashes on cm logo and restarts.

Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
And for the CID (so you can flash any ROM or RUU for latest radios and debranding)?
fastboot oem writecid 11111111 (to change CID)
fastboot reboot-bootloader (bootloader will reboot)
fastboot getvar cid (it will confirm your CID as 11111111
fastboot reboot (to reboot back in your current ROM)
Click to expand...
Click to collapse
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"

blogodoblogodo said:
Your cidnum is not 1111111111 (i don't how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Click to expand...
Click to collapse
Alrighty, the CID is now supercid, but it still doesn't boot.

blogodoblogodo said:
Your cidnum is not 1111111111 (i don't know how many "1" it got)
Maybe here
Gotcha!!!
From this thread
Flash the latest baseband too for better networking
Then try flashing ROM"s"
Click to expand...
Click to collapse
I've done that now, still won't boot. I'm just gonna give up at this point.

ShadowCodeGaming said:
Alrighty, the CID is now supercid, but it still doesn't boot.
Click to expand...
Click to collapse
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day

blogodoblogodo said:
Wipe All for a clean install put the GApps and that's the end of the Nightmare ^^
Have a nice night... Back to home end of work day
Click to expand...
Click to collapse
I wiped it clean... Didn't change anything

My Fastboot getvar all:
INFOversion: 0.5
INFOversion-bootloader: 1.29.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: HTxxxxxxxxxx
INFOimei: 35xxxxxxxxxx
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4065mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86f6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.488s
After all these flash could you write your new "Fastboot getvar all" please

I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.

flash the boot.img of the rom via fastboot command
fastboot flash boot boot.img

Sajito said:
I'm not sure, but I think it might be related to your hboot. Can you update your hboot to 1.29? I remember to have read somewhere that that would help.
Click to expand...
Click to collapse
Any link to it? Tried google but didn't find it.

ShadowCodeGaming said:
Any link to it? Tried google but didn't find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21711303&postcount=2
Under HBoot 1.29.0000 Patch.

Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation

ShadowCodeGaming said:
Allright, did the hboot patch and flashed boot.img manually, both made no difference
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Plz, Another getvar all.
Try this PacManRom

blogodoblogodo said:
Plz, Another getvar all.
Try this PacManRom
Click to expand...
Click to collapse
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation

ShadowCodeGaming said:
You'll get it as soon as I'm home
Sent from my Sense 5 powered HTC Sensation
Click to expand...
Click to collapse
Okéy see you

blogodoblogodo said:
Okéy see you
Click to expand...
Click to collapse
Here's the new getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT15XXXXXXXXXXXXX
(bootloader) imei: 356XXXXXXXXXXXX
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3909mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.499s