Hi!
I rooted my Nexus few months back from now with Fastboot recovery. I got my Android ICS update 4.0.4 last week, I tried downloading it, I downloaded it, then it said rebooting for install. But my Nexus S freezes at Google logo with my unlocked lock sign. I have tried installing it many times, but all in vein.
Please somebody help!
nixhead said:
Hi!
I rooted my Nexus few months back from now with Fastboot recovery. I got my Android ICS update 4.0.4 last week, I tried downloading it, I downloaded it, then it said rebooting for install. But my Nexus S freezes at Google logo with my unlocked lock sign. I have tried installing it many times, but all in vein.
Please somebody help!
Click to expand...
Click to collapse
If you're rooted, why dont you just use the rooted method to install the update. Someone made the update flashable. Its in the development section.
either way, pull the battery to see if you still have your recovery(volume up and power button)... if so, then restore to your latest restored point, hoping that you did make a backup
Then download the newest ICS update and just flash it the rooted way.
But if you insist on the official, unroot and then get the update via stock recovery method
good luck
Are you using the latest version of CWM?
If you've got a modified system image (including root), you should not use official upgrade packages. If you want to update the rooted system, you can use unofficial packages (in CWM). To boot a system, please start your recovery and flash a proper (4.0.4, unrooted or rooted, signed or unsigned) system image. If you erase the data partition all of your data is lost!
If you have stock recovery, then only signed images can be flashed. To be able to flash unsigned images you'll need CWM, which can be flashed through fastboot.
By the way official firmware can be downloaded from Google. Important! All of your data (including USB storage area) will be lost after the full upgrade with fastboot!
Help! I cannot flash a custom recovery onto my phone (Verizon/RAZR Maxx HD). I used to have SafeStrap installed and it worked fine. One day I took a OTA update and lost root. So I used RSD Lite to re-flash my stock partition so I could take advantage of Towelroot and Motopocolypse while they still worked and was successful in doing both. So my phone was unlocked and rooted again and I was so happy I just used it as is for a few months. Later on, on decided it was time to try a new ROM, at which point I attempted to flash CWM recovery and it failed. So then I tried flashing SafeStrap again, and now that also failed. Then, in the process of troubleshooting failure to flash a custom recovery I managed to unroot myself (thanks to someone's bad advice). ... And of course this happened after I already took the OTA update that patched the towelroot exploit. So now my phone is Unlocked but not rooted anymore. I still cannot flash CWM (which is what I'd like to do) and use a custom ROM. Any helpful advice or constructive feedback would be greatly appreciated... Thanks!
Currently on Android 4.4.2, System Version 183.46.15.xt926.Verizon.en.US
Are you sure you are unlocked? Boot into your fastboot screen and tell us what it says. If you are unlocked, it's easy to regain root. Flash a recovery (try TWRP since CWM seems to not work) and flash a SU zip.
Sent from my HTC6525LVW using Tapatalk
Same Issue
Apparently they slipped in a fix for towelroot because I losr root. Still have an unlocked bootloader thanks to motopokalyse. I actually jacked my stock recovery and am working on fixing now. I'll let you know if I get it fixed and can flash a recovery.
Hi,
I have a UK Moto G (2013) running 4.4.4 KitKat and I installed CWM recovery and rooted it some time ago. Now they are pushing out Lollipop OTA I am getting nagged by the phone to update - but, it always fails when I try. Presumably this will be because of the CWM and/or root. I tried a full unroot but that didn't help as CWM kept complaining on the upgrade reboot about something (can't remember what now!). I've read that in order to get the OTA update to work, I have to get the phone completely back to stock, but I can't find a working stock recovery for it. Do I have to take it back to stock or not ? Either way, would anyone know how I can get the OTA update to work please ?
I've tried flashing a couple of stock recoveries, but one fails to flash at all and the other doesn't work - you choose recovery and it just reboots the phone.
At the moment it's back to rooted, unlocked bootloader and CWM recovery.
Any help you could offer would be very gratefully received.
Thanks!
Are you able to locate the phone's from here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
I got the Galaxy S6 yesterday and coming from Nexus 5, I wanted to remove the existing bloatware by flashing the XtrestoLite Deodexed ROM. This one here: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/rom-xtrestolite-deodexed-mod-edition-1-3-t3119968
I'm haven't had much experience in rooting and it's my first time flashing a custom ROM. The phone was running on Android 5.1.1.
Apparently I failed. I started with CF-Root but I wasn't sure if it was done correctly. This was followed by TWRP 2.8.7.1 . Then I tried booting up the phone and the boot logo just loops. I tried to wipe the cache as well as the Delvik-cache through TWRP but it's still the same. Then I tried to flash the stock ROM that I found online but I got the error "Nand Write Start" followed by "Fail". I seem to have tried everything and now I just want to get the phone to work again. It shouldn't be so hard.
Someone help me please :crying:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Gallitho said:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Click to expand...
Click to collapse
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Edit: I managed to do it through initialization. I'll update when it's done.
Edit 2: It worked! Thanks so much!
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
1qazwsx4 said:
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
Click to expand...
Click to collapse
How could I transfer the flashable ROM to the phone when I can't have it boot up to connect to my computer?
Gallitho said:
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
Click to expand...
Click to collapse
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Can you guys help me check if this post has the correct steps or is it missing anything like bootloader and root?
reddit.com/r/GalaxyS6/comments/39wwf6/should_i_install_xtrestolite_rom/cs7b7yq
ztmj96 said:
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Click to expand...
Click to collapse
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Gallitho said:
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Click to expand...
Click to collapse
1. So what is the correct order?
2. Did you have to manually unlock bootloader?
3. And is it a must to install uniKernel in order to root the device?
I have no idea how to proceed now.
This requires a lot more effort than I thought :fingers-crossed:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Gallitho said:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Click to expand...
Click to collapse
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
ztmj96 said:
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
Click to expand...
Click to collapse
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Gallitho said:
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Click to expand...
Click to collapse
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
ztmj96 said:
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
Click to expand...
Click to collapse
Glad to read that, dude!
Yep, our situations are identical and also happened at the same time haha.
Now's time to enjoy! :good:
So i'm on the UPD1 baseband and would like to get to the latest. The only problem is that my Note 5 no longer rapid charges and can't be detected properly from any pc with any micro usb cable, samsung or not. I'm rooted and with TWRP and so I can flash almost any ROM but would like to possibly get it to to the latest firmware update especially if I need to return it and get a replacement. I'd also like to be able to root it, any ideas on doing this with out odin?
I would say make a backup of your ROM now. Then flash the ROM with a full wipe and reboot. Or you can just do a factory reset to see if your system fixes after that. But you do have to make a backup first. Now remember if you upgrade to the latest you cannot downgrade back again. Now if you get your phone working again (with connection to PC) then I would like to ask you to do me a favor and make a backup of your rooted, factory reset stock DP1 ROM via TWRP and send to me? I'm trying to see if we can downgrade form MM to LL via TWRP with a rooted stock ROM from someone that's still on LL. We who are on MM cannot downgrade. I can give you all the steps you need to do so in order for you to send a clean stock ROM without your data if you need me to. Send me an IM if interested.