Help! I cannot flash a custom recovery onto my phone (Verizon/RAZR Maxx HD). I used to have SafeStrap installed and it worked fine. One day I took a OTA update and lost root. So I used RSD Lite to re-flash my stock partition so I could take advantage of Towelroot and Motopocolypse while they still worked and was successful in doing both. So my phone was unlocked and rooted again and I was so happy I just used it as is for a few months. Later on, on decided it was time to try a new ROM, at which point I attempted to flash CWM recovery and it failed. So then I tried flashing SafeStrap again, and now that also failed. Then, in the process of troubleshooting failure to flash a custom recovery I managed to unroot myself (thanks to someone's bad advice). ... And of course this happened after I already took the OTA update that patched the towelroot exploit. So now my phone is Unlocked but not rooted anymore. I still cannot flash CWM (which is what I'd like to do) and use a custom ROM. Any helpful advice or constructive feedback would be greatly appreciated... Thanks!
Currently on Android 4.4.2, System Version 183.46.15.xt926.Verizon.en.US
Are you sure you are unlocked? Boot into your fastboot screen and tell us what it says. If you are unlocked, it's easy to regain root. Flash a recovery (try TWRP since CWM seems to not work) and flash a SU zip.
Sent from my HTC6525LVW using Tapatalk
Same Issue
Apparently they slipped in a fix for towelroot because I losr root. Still have an unlocked bootloader thanks to motopokalyse. I actually jacked my stock recovery and am working on fixing now. I'll let you know if I get it fixed and can flash a recovery.
Related
OK so I got my nice new shiny one s & proceeded to unlock bootloader, flash TWRP recovery, then root with Super SU. I then start reading about how One S may have crap signal reception. Guess what, mine does. I want to install the OTA update to see if signal improves but obviously couldnt with TWRP flashed so I found the stock recovery and flashed it back to stock. However when I boot to recovery the stock reads that the phone is TAMPERED, and I still cant install the OTA update. I have unrooted with SuperSU aswell.
Any suggestions as to how I can install the update?
Relock bootloader
or just flash the radio you want to use
I need advice on what you would do in my situation. I am on stock rom LF2, rooted, CWM recovery and bootloader unlocked and I want to upgrade to JB. What would you recommend be my upgrade path without wiping data? Just doing a dirty flash using CWM or upgrade via OTA and then rooting using the ODIN packages? As an added complication, I recently acquired the copy/paste bug. Thanks for your input.
Use the pre-rooted no-wipe version here:http://forum.xda-developers.com/showthread.php?t=1984436. Then you can just boot up the phone and flash CWM recovery using EZ-Recovery and unlock with EZ-Unlock version 1.2. There is another guide stickied at the top of the development section but I think it is a little more work to get the same result. Make sure to take a backup first of course. Then if you want the latest CWM recovery you can flash it with ROM Manager. I used this method to go from stock rooted and unlocked VRALG1 to the J1, K1 and then K3 leaks all without wiping data and everything has worked great. No media drain or anything else.
Thanks, I was confused about which method to use. I just finished flashing and everything seems to be working.
So i have successfully rooted my droid razr m and unlocked the bootloader. i tried using safestrap to avail, i it didnt work at all. Then i tried clock work recovery flashed through with adb. It got flashed successfully. Then tried to get recovery open didnt work. I wanted to know if the unlocked bootloader message is the cause of both programs not working. or can you guys give me maybe better instructions to start flashing roms on phone on a rooted and unlocked bootloader. THANK YOU. I wanna put a rom on my device so my phones themes look cool.
I am also on 4.4.2 stock. and how do i get rid of the unlocked bootloader message.
shawnsingh said:
So i have successfully rooted my droid razr m and unlocked the bootloader. i tried using safestrap to avail, i it didnt work at all. Then i tried clock work recovery flashed through with adb. It got flashed successfully. Then tried to get recovery open didnt work. I wanted to know if the unlocked bootloader message is the cause of both programs not working. or can you guys give me maybe better instructions to start flashing roms on phone on a rooted and unlocked bootloader. THANK YOU. I wanna put a rom on my device so my phones themes look cool.
I am also on 4.4.2 stock. and how do i get rid of the unlocked bootloader message.
Click to expand...
Click to collapse
you don't need ss any more with an unlocked bl, although it should still work. however, the version you tried probably isnt compatible with kk.
as for cwm and twrp, make sure you have the correct version for kk, and after you install it you want to boot directly into it. do not let the phone boot the os the first time or it will wipe the recovery back to the stock one. also you should grab the su flashable zip and flash that when your in recovery the first time, so you have a properly working root.
after all that you can put a rom on your phone and flash it, but make sure you get one that is on kk base or it will just bootloop.
there is a method to remove the ul bl warning, check you forums general section for the post. i know there is one in the maxx/hd forum, but i don't know if they are cross compatible.
XT907
So is there any downloads i need. Can you be alittle bit more specific. I am stuck i can root i can flash 4.4.2 kk. Just need help with flash =ing custom roms and what i need for it. Thank
bwen diord said:
you don't need ss any more with an unlocked bl, although it should still work. However, the version you tried probably isnt compatible with kk.
As for cwm and twrp, make sure you have the correct version for kk, and after you install it you want to boot directly into it. Do not let the phone boot the os the first time or it will wipe the recovery back to the stock one. Also you should grab the su flashable zip and flash that when your in recovery the first time, so you have a properly working root.
After all that you can put a rom on your phone and flash it, but make sure you get one that is on kk base or it will just bootloop.
There is a method to remove the ul bl warning, check you forums general section for the post. I know there is one in the maxx/hd forum, but i don't know if they are cross compatible.
Click to expand...
Click to collapse
Hi,
I have a UK Moto G (2013) running 4.4.4 KitKat and I installed CWM recovery and rooted it some time ago. Now they are pushing out Lollipop OTA I am getting nagged by the phone to update - but, it always fails when I try. Presumably this will be because of the CWM and/or root. I tried a full unroot but that didn't help as CWM kept complaining on the upgrade reboot about something (can't remember what now!). I've read that in order to get the OTA update to work, I have to get the phone completely back to stock, but I can't find a working stock recovery for it. Do I have to take it back to stock or not ? Either way, would anyone know how I can get the OTA update to work please ?
I've tried flashing a couple of stock recoveries, but one fails to flash at all and the other doesn't work - you choose recovery and it just reboots the phone.
At the moment it's back to rooted, unlocked bootloader and CWM recovery.
Any help you could offer would be very gratefully received.
Thanks!
Are you able to locate the phone's from here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
Hey guys, I'm pretty much a noob at rooting and unlocking. Up until I rooted my nexus 5 in the hopes to get side by side apps I haven't rooted since my gs2. Anyways I rooted my phone via the nexus 5 root toolkit and unlocked the bootloader and whatnot. I found out that I couldn't do side by side because it wasn't available for my version of android. I attempted to unroot and return to stock and I just unrooted and locked the bootloader. I'm a total noob at this and have googled for hours and can't figure out how to return my phone to stock without twrp. Everytime I try to do OTA updates it just restarts to twrp and it's super annoying. Can anyone give me a for dummies walkthrough of how to get back to stock so I can do OTA updates?
I think (people will correct me if I'm wrong) that in order to get back to full stock, including stock recovery, you will have to do a flash of the stock ROM which will install everything including recovery. Maybe there's an image of the stock recovery available which you could flash into the recovery partition to overwrite TWRP - I've never thought of looking, but Google is your friend...
Yea just fastboot the stock img files there's plenty of fastboot guides around and it's stupidly easy to do